IsolationLevel 列舉

參考

定義

命名空間:: System.Data

組件:: System.Data.Common.dll

組件:: System.Data.dll

組件:: netstandard.dll

重要

部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。

指定此連接的異動鎖定行為。

此列舉支援其成員值的位元組合。

public enum class IsolationLevel

public enum IsolationLevel

[System.Flags]
public enum IsolationLevel

type IsolationLevel =

[<System.Flags>]
type IsolationLevel =

Public Enum IsolationLevel

繼承: Object

ValueType

Enum
IsolationLevel

屬性: FlagsAttribute

欄位

Chaos	16	無法覆寫來自隔離程度更深之交易的暫止變更。
ReadCommitted	4096	當正在讀取資料來避免 Dirty 讀取時，會使用共用鎖定，但是在異動結束之前，資料可以變更，這將會產生非重複讀取或虛設資料。
ReadUncommitted	256	可以進行 Dirty 讀取，這表示未發出共用鎖定，並且沒有生效的獨佔鎖定。
RepeatableRead	65536	鎖定是加諸於查詢中使用的所有資料，以防止其他使用者更新資料。防止非重複讀取，但是仍然可能造成虛設資料列。
Serializable	1048576	範圍鎖定會置於 DataSet 上，以免其他使用者在異動完成前將資料列更新或插入至資料集中。
Snapshot	16777216	在其他應用程式正在修改相同資料時，儲存應用程式可以讀取的資料版本，藉此減少封鎖。指出即使重新查詢，您也無法從某個異動看到在其他異動中所產生的變更。
Unspecified	-1	使用與指定不同的隔離等級，但無法判斷該等級。

範例

此應用程式示範如何在中使用IsolationLevel DbTransaction。此範例將示範不同隔離等級中允許下列哪些行為：

已變更讀取。
不可重複的讀取。
幽靈。

此應用程式會在下列隔離等級中執行：

ReadUncommitted
ReadCommitted
RepeatableRead
可序列化
快照式

PhantomReadThreads 類別示範特定交易是否允許虛設讀取行為。如果交易允許行為，線程會依下列順序運作：

在第一個線程中，選取 [ (所有) ] 的產品。
在第二個線程中，插入新產品。
在第二個線程中認可交易。
再次選取產品。
認可第一個線程中的交易。

如果交易允許行為，則兩個 Select 作業將取得不同的結果。

NonrepeatableReadThreads 類別示範特定交易是否允許不可重複讀取行為。如果交易允許行為，線程會依下列順序運作：

在第一個線程中，選取 product (ProductId=1) 。
在第二個線程中，更新 ProductId=1 (Quantity 值) 。
在第二個線程中認可交易。
再次選取產品。
認可第一個線程中的交易。

如果交易允許行為，則兩個 Select 作業將取得不同的結果。

ExchangeValuesThreads 類別示範可串行化和快照集交易之間的差異。針對可串行化交易，線程會依下列順序運作：

在第一個線程中，取得 productId=2 (Price) ，並儲存在變數中。
在第一個線程中，使用 productId=2) 的產品價格更新 (product (ProductId=1) 。
認可第一個線程中的交易。
在第二個線程中，取得 product (ProductId=1) ，並儲存在變數中。
在第二個線程中，以 productId=1) 的價格更新 (product (ProductId=2) 。
在第二個線程中認可交易。

現在 Price (ProductId=1 和 ProductId=2) 的值與 Product (ProductId=2 的原始價格相同) 。

針對快照集交易，線程會依下列順序運作：

在第一個線程中，取得 product (ProductId=2) 並儲存在變數中;
在第一個線程中，使用 productId=2) 的產品價格更新 (product (ProductId=1) 。
在第二個線程中，從快照集取得 product (ProductId=1) ，並儲存在變數中。
在第二個線程中，以 productId=1) 的價格更新 (product (ProductId=2) 。
在第二個線程中認可交易。
認可第一個線程中的交易。

現在， (ProductId=1 和 ProductId=2) 交換產品的價格。

DirtyReadThreads 類別會示範特定交易是否允許 Dirty Read 行為。如果交易允許行為，線程會依下列順序運作：

在第一個線程中，開始交易，並將 Quantity 值新增 (ProductId=1) 。
在第二個線程中，讀取 Quantity 值，然後再次新增值。
在第二個線程中認可交易。
回復第一個線程中的交易。

如果交易允許行為，則會新增 Quantity 值兩次。

using System;
using System.Data.SqlClient;
using System.Data;
using System.Threading;
using System.Threading.Tasks;

namespace CSDataIsolationLevel {

   // Use the delegate to call the different threads.
   public delegate void AsyncAccessDatabase(String connString, IsolationLevel level);

   static class DirtyReadThreads {
      public static void DirtyReadFirstThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the DirtyReadFirstThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    Update dbo.Products set Quantity=Quantity+100 where ProductId=1;
                    WaitFor Delay '00:00:06';";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "DirtyReadFirst")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;
                  command.ExecuteNonQuery();
               }

               if (tran != null)
                  tran.Rollback();
            }
         }

         Console.WriteLine("Exit from the DirtyReadFirstThread.....");
      }

      public static void DirtyReadSecondThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the DirtyReadSecondThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    WaitFor Delay '00:00:03';

                    Declare @qty int;
                    select @qty=Quantity from dbo.Products where ProductId=1;

                    Update dbo.Products set Quantity=@qty+100 where ProductId=1;";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "DirtyReadSecond")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;
                  command.ExecuteNonQuery();
               }
               tran.Commit();
            }
         }

         Console.WriteLine("Exit from the DirtyReadSecondThread.....");
      }
   }

   static class NonrepeatableReadThreads {
      public static void NonrepeatableReadFirstThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the NonrepeatableReadFirstThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    Select ProductId,ProductName,Quantity,Price
                    from dbo.Products
                    where ProductId=1

                    WaitFor Delay '00:00:06';

                    Select ProductId,ProductName,Quantity,Price
                    from dbo.Products
                    where ProductId=1";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "NonrepeatableReadFirst")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;

                  using (SqlDataReader reader = command.ExecuteReader()) {
                     Boolean isFirstReader = true;
                     do {
                        Console.WriteLine("It's the result of {0} read:", isFirstReader ? "first" : "second");
                        TransactionIsolationLevels.DisplayData(reader);
                        isFirstReader = !isFirstReader;
                     } while (reader.NextResult() && !isFirstReader);
                  }
               }

               tran.Commit();
            }
         }

         Console.WriteLine("Exit from the NonrepeatableReadFirstThread.....");
      }

      public static void NonrepeatableReadSecondThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the NonrepeatableReadSecondThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    WaitFor Delay '00:00:03';

                    Update dbo.Products set Quantity=Quantity+100 where ProductId=1;";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "NonrepeatableReadSecond")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;
                  command.ExecuteNonQuery();
               }
               tran.Commit();
            }
         }

         Console.WriteLine("Exit from the NonrepeatableReadSecondThread.....");
      }
   }

   static class PhantomReadThreads {
      public static void PhantomReadFirstThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the PhantomReadFirstThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    Select ProductId,ProductName,Quantity,Price
                    from dbo.Products

                    WaitFor Delay '00:00:06';

                    Select ProductId,ProductName,Quantity,Price
                    from dbo.Products";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "PhantomReadFirst")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;

                  using (SqlDataReader reader = command.ExecuteReader()) {
                     Boolean isFirstReader = true;
                     do {
                        Console.WriteLine("It's the result of {0} read:", isFirstReader ? "first" : "second");

                        TransactionIsolationLevels.DisplayData(reader);

                        isFirstReader = !isFirstReader;
                     } while (reader.NextResult() && !isFirstReader);
                  }
               }

               tran.Commit();
            }
         }
         Console.WriteLine("Exit from the PhantomReadFirstThread.....");
      }

      public static void PhantomReadSecondThread(String connStrig, IsolationLevel level) {
         Console.WriteLine("Begin the PhantomReadSecondThread.....");

         using (SqlConnection conn = new SqlConnection(connStrig)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    WaitFor Delay '00:00:03';

                    INSERT [dbo].[Products] ([ProductName], [Quantity], [Price])
                    VALUES (N'White Bike', 843, 1349.00)";

            conn.Open();

            using (SqlTransaction tran = conn.BeginTransaction(level, "PhantomReadSecond")) {
               using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                  command.Transaction = tran;
                  command.ExecuteNonQuery();
               }
               tran.Commit();
            }
         }

         Console.WriteLine("Exit from the PhantomReadSecondThread.....");
      }
   }

   // Demonstrates if the specific transaction allows the following behaviors:
   // 1. Dirty reads;
   // 2. Non-repeatable reads;
   // 3. Phantoms.
   static class TransactionIsolationLevels {
      public static void DemonstrateIsolationLevel(String connString, IsolationLevel level) {
         // Before connect the database, recreate the table.
         OperateDatabase.CreateTable(connString);
         DemonstrateIsolationLevel(connString, level, DirtyReadThreads.DirtyReadFirstThread, DirtyReadThreads.DirtyReadSecondThread);
         DisplayData(connString);
         Console.WriteLine();

         OperateDatabase.CreateTable(connString);
         DemonstrateIsolationLevel(connString, level, NonrepeatableReadThreads.NonrepeatableReadFirstThread, NonrepeatableReadThreads.NonrepeatableReadSecondThread);
         Console.WriteLine();

         OperateDatabase.CreateTable(connString);
         DemonstrateIsolationLevel(connString, level, PhantomReadThreads.PhantomReadFirstThread, PhantomReadThreads.PhantomReadSecondThread);
         Console.WriteLine();
      }

      // Demonstrates if the specific transaction allows the specific behaviors.
      public static void DemonstrateIsolationLevel(String connString, IsolationLevel level,
          AsyncAccessDatabase firstThread, AsyncAccessDatabase secondThread) {
         Task[] tasks ={
                            Task.Factory.StartNew(()=>firstThread(connString, level)),
                            Task.Factory.StartNew(()=>secondThread(connString, level))
                        };

         Task.WaitAll(tasks);
      }

      static class ExchangeValuesThreads {
         public static void ExchangeValuesFirstThread(String connStrig, IsolationLevel level) {
            Console.WriteLine("Begin the ExchangeValuesFirstThread.....");

            using (SqlConnection conn = new SqlConnection(connStrig)) {
               String cmdText = @"Use DbDataIsolationLevel;

                    Declare @price money;
                    select @price=Price from dbo.Products where ProductId=2;

                    Update dbo.Products set Price=@price where ProductId=1;

                    WaitFor Delay '00:00:06'; ";

               conn.Open();
               using (SqlTransaction tran = conn.BeginTransaction(level, "ExchangeValuesFirst")) {

                  using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                     command.Transaction = tran;
                     command.ExecuteNonQuery();
                  }

                  tran.Commit();
               }
            }

            Console.WriteLine("Exit from the ExchangeValuesFirstThread.....");
         }

         public static void ExchangeValuesSecondThread(String connStrig, IsolationLevel level) {
            Console.WriteLine("Begin the ExchangeValuesSecondThread.....");

            using (SqlConnection conn = new SqlConnection(connStrig)) {
               String cmdText = @"Use DbDataIsolationLevel;

                    WaitFor Delay '00:00:03';

                    Declare @price money;
                    select @price=Price from dbo.Products where ProductId=1;

                    Update dbo.Products set Price=@price where ProductId=2;";

               conn.Open();

               using (SqlTransaction tran = conn.BeginTransaction(level, "ExchangeValuesSecond")) {
                  using (SqlCommand command = new SqlCommand(cmdText, conn)) {
                     command.Transaction = tran;
                     command.ExecuteNonQuery();
                  }
                  tran.Commit();
               }
            }

            Console.WriteLine("Exit from the ExchangeValuesSecondThread.....");
         }
      }

      // Demonstrates the difference between the Serializable and Snapshot transaction
      public static void DemonstrateBetweenSnapshotAndSerializable(String connString) {
         OperateDatabase.CreateTable(connString);

         Console.WriteLine("Exchange Vaules in the Snapshot transaction:");
         DemonstrateIsolationLevel(connString, IsolationLevel.Snapshot,
             ExchangeValuesThreads.ExchangeValuesFirstThread,
             ExchangeValuesThreads.ExchangeValuesSecondThread);
         DisplayData(connString);
         Console.WriteLine();

         Console.WriteLine("Cannot Exchange Vaules in the Serializable transaction:");
         OperateDatabase.CreateTable(connString);
         DemonstrateIsolationLevel(connString, IsolationLevel.Serializable,
             ExchangeValuesThreads.ExchangeValuesFirstThread,
             ExchangeValuesThreads.ExchangeValuesSecondThread);
         DisplayData(connString);
      }

      public static void DisplayData(String connString) {
         using (SqlConnection conn = new SqlConnection(connString)) {
            String cmdText = @"Use DbDataIsolationLevel;

                    Select ProductId,ProductName,Quantity,Price
                    from dbo.Products";

            conn.Open();

            using (SqlCommand command = new SqlCommand(cmdText, conn)) {
               using (SqlDataReader reader = command.ExecuteReader()) {
                  DisplayData(reader);
               }
            }
         }
      }

      public static void DisplayData(SqlDataReader reader) {
         Boolean isFirst = true;

         while (reader.Read()) {
            if (isFirst) {
               isFirst = false;

               for (int i = 0; i < reader.FieldCount; i++)
                  Console.Write("{0,-12}   ", reader.GetName(i));
               Console.WriteLine();
            }

            for (int i = 0; i < reader.FieldCount; i++)
               Console.Write("{0,-12}   ", reader[i]);
            Console.WriteLine();
         }
      }
   }

   // This class includes database operations. If there's no database 'DbDataIsolationLevel', create the database.
   static class OperateDatabase {
      public static Boolean CreateDatabase(String connString) {
         using (SqlConnection conn = new SqlConnection(connString)) {
            String cmdText = @"Use Master;

                                     if Db_Id('DbDataIsolationLevel') is null
                                      create Database [DbDataIsolationLevel];";

            using (SqlCommand command = new SqlCommand(cmdText, conn)) {
               conn.Open();
               command.ExecuteNonQuery();
            }

            Console.WriteLine("Create the Database 'DbDataIsolationLevel'");
         }

         return true;
      }

      // If there's no table [dbo].[Products] in DbDataIsolationLevel, create the table; or recreate it.
      public static Boolean CreateTable(String connString) {
         using (SqlConnection conn = new SqlConnection(connString)) {
            String cmdText = @"Use DbDataIsolationLevel

                                    if Object_ID('[dbo].[Products]') is not null
                                    drop table [dbo].[Products]

                                    Create Table [dbo].[Products]
                                    (
                                    [ProductId] int IDENTITY(1,1) primary key,
                                    [ProductName] NVarchar(100) not null,
                                    [Quantity] int null,
                                    [Price] money null
                                    )";

            using (SqlCommand command = new SqlCommand(cmdText, conn)) {
               conn.Open();
               command.ExecuteNonQuery();
            }
         }

         return InsertRows(connString);
      }

      // Insert some rows into [dbo].[Products] table.
      public static Boolean InsertRows(String connString) {
         using (SqlConnection conn = new SqlConnection(connString)) {
            String cmdText = @"Use DbDataIsolationLevel

                    INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Blue Bike', 365,1075.00)
                    INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Red Bike', 159, 1299.00)
                    INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Black Bike', 638, 1159.00)";

            using (SqlCommand command = new SqlCommand(cmdText, conn)) {
               conn.Open();
               command.ExecuteNonQuery();
            }
         }
         return true;
      }

      // Turn on or off 'ALLOW_SNAPSHOT_ISOLATION'
      public static Boolean SetSnapshot(String connString, Boolean isOpen) {
         using (SqlConnection conn = new SqlConnection(connString)) {
            String cmdText = null;

            if (isOpen)
               cmdText = @"ALTER DATABASE DbDataIsolationLevel SET ALLOW_SNAPSHOT_ISOLATION ON";
            else
               cmdText = @"ALTER DATABASE DbDataIsolationLevel SET ALLOW_SNAPSHOT_ISOLATION OFF";

            using (SqlCommand command = new SqlCommand(cmdText, conn)) {
               conn.Open();
               command.ExecuteNonQuery();
            }
         }

         return true;
      }
   }
   class Program {
      static void Main(string[] args) {
         String connString = "Data Source=(local);Initial Catalog=master;Integrated Security=True;Asynchronous Processing=true;";

         OperateDatabase.CreateDatabase(connString);
         Console.WriteLine();

         Console.WriteLine("Demonstrate the ReadUncommitted transaction: ");
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString,
             System.Data.IsolationLevel.ReadUncommitted);
         Console.WriteLine("-----------------------------------------------");

         Console.WriteLine("Demonstrate the ReadCommitted transaction: ");
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString,
             System.Data.IsolationLevel.ReadCommitted);
         Console.WriteLine("-----------------------------------------------");

         Console.WriteLine("Demonstrate the RepeatableRead transaction: ");
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString,
             System.Data.IsolationLevel.RepeatableRead);
         Console.WriteLine("-----------------------------------------------");

         Console.WriteLine("Demonstrate the Serializable transaction: ");
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString,
             System.Data.IsolationLevel.Serializable);
         Console.WriteLine("-----------------------------------------------");

         Console.WriteLine("Demonstrate the Snapshot transaction: ");
         OperateDatabase.SetSnapshot(connString, true);
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString,
             System.Data.IsolationLevel.Snapshot);
         Console.WriteLine("-----------------------------------------------");

         Console.WriteLine("Demonstrate the difference between the Snapshot and Serializable transactions:");
         TransactionIsolationLevels.DemonstrateBetweenSnapshotAndSerializable(connString);
         OperateDatabase.SetSnapshot(connString, false);
         Console.WriteLine();
      }
   }
}

Imports System.Data.SqlClient
Imports System.Data
Imports System.Threading
Imports System.Threading.Tasks

Namespace CSDataIsolationLevel

   ' Use the delegate to call the different threads.
   Public Delegate Sub AsyncAccessDatabase(connString As [String], level As IsolationLevel)

   NotInheritable Class DirtyReadThreads
      Private Sub New()
      End Sub
      Public Shared Sub DirtyReadFirstThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the DirtyReadFirstThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel; " & vbCr & vbLf & vbCr & vbLf &
                "Update dbo.Products set Quantity=Quantity+100 where ProductId=1;" & vbCr & vbLf &
                "WaitFor Delay '00:00:06';"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "DirtyReadFirst")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran
                  command.ExecuteNonQuery()
               End Using

               If tran IsNot Nothing Then
                  tran.Rollback()
               End If
            End Using
         End Using

         Console.WriteLine("Exit from the DirtyReadFirstThread.....")
      End Sub

      Public Shared Sub DirtyReadSecondThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the DirtyReadSecondThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel;" & vbCr & vbLf & vbCr & vbLf &
                "WaitFor Delay '00:00:03'; " & vbCr & vbLf & vbCr & vbLf &
                "Declare @qty int;" & vbCr & vbLf &
                "select @qty=Quantity from dbo.Products where ProductId=1;" & vbCr & vbLf & vbCr & vbLf &
                "Update dbo.Products set Quantity=@qty+100 where ProductId=1;"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "DirtyReadSecond")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran
                  command.ExecuteNonQuery()
               End Using
               tran.Commit()
            End Using
         End Using

         Console.WriteLine("Exit from the DirtyReadSecondThread.....")
      End Sub
   End Class


   NotInheritable Class NonrepeatableReadThreads
      Private Sub New()
      End Sub
      Public Shared Sub NonrepeatableReadFirstThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the NonrepeatableReadFirstThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel; " & vbCr & vbLf & vbCr & vbLf &
                "Select ProductId,ProductName,Quantity,Price" & vbCr & vbLf &
                "from dbo.Products" & vbCr & vbLf &
                "where ProductId=1" & vbCr & vbLf & vbCr & vbLf &
                "WaitFor Delay '00:00:06';" & vbCr & vbLf & vbCr & vbLf &
                "Select ProductId,ProductName,Quantity,Price" & vbCr & vbLf &
                "from dbo.Products" & vbCr & vbLf &
                "where ProductId=1"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "NonrepeatableReadFirst")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran

                  Using reader As SqlDataReader = command.ExecuteReader()
                     Dim isFirstReader As [Boolean] = True
                     Do
                        Console.WriteLine("It's the result of {0} read:", If(isFirstReader, "first", "second"))
                        TransactionIsolationLevels.DisplayData(reader)
                        isFirstReader = Not isFirstReader
                     Loop While reader.NextResult() AndAlso Not isFirstReader
                  End Using
               End Using

               tran.Commit()
            End Using
         End Using

         Console.WriteLine("Exit from the NonrepeatableReadFirstThread.....")
      End Sub

      Public Shared Sub NonrepeatableReadSecondThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the NonrepeatableReadSecondThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel;" & vbCr & vbLf & vbCr & vbLf &
                "WaitFor Delay '00:00:03'; " & vbCr & vbLf & vbCr & vbLf &
                "Update dbo.Products set Quantity=Quantity+100 where ProductId=1;"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "NonrepeatableReadSecond")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran
                  command.ExecuteNonQuery()
               End Using
               tran.Commit()
            End Using
         End Using

         Console.WriteLine("Exit from the NonrepeatableReadSecondThread.....")
      End Sub
   End Class


   NotInheritable Class PhantomReadThreads
      Private Sub New()
      End Sub
      Public Shared Sub PhantomReadFirstThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the PhantomReadFirstThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel; " & vbCr & vbLf & vbCr & vbLf &
                "Select ProductId,ProductName,Quantity,Price" & vbCr & vbLf &
                "from dbo.Products" & vbCr & vbLf & vbCr & vbLf &
                "WaitFor Delay '00:00:06';" & vbCr & vbLf & vbCr & vbLf &
                "Select ProductId,ProductName,Quantity,Price" & vbCr & vbLf &
                "from dbo.Products"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "PhantomReadFirst")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran

                  Using reader As SqlDataReader = command.ExecuteReader()
                     Dim isFirstReader As [Boolean] = True
                     Do
                        Console.WriteLine("It's the result of {0} read:", If(isFirstReader, "first", "second"))

                        TransactionIsolationLevels.DisplayData(reader)

                        isFirstReader = Not isFirstReader
                     Loop While reader.NextResult() AndAlso Not isFirstReader
                  End Using
               End Using

               tran.Commit()
            End Using
         End Using
         Console.WriteLine("Exit from the PhantomReadFirstThread.....")
      End Sub

      Public Shared Sub PhantomReadSecondThread(connStrig As [String], level As IsolationLevel)
         Console.WriteLine("Begin the PhantomReadSecondThread.....")

         Using conn As New SqlConnection(connStrig)
            Dim cmdText As [String] = "Use DbDataIsolationLevel;" & vbCr & vbLf & vbCr & vbLf &
                "WaitFor Delay '00:00:03'; " & vbCr & vbLf & vbCr & vbLf &
                "INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) " & vbCr & vbLf &
                "VALUES (N'White Bike', 843, 1349.00)"

            conn.Open()

            Using tran As SqlTransaction = conn.BeginTransaction(level, "PhantomReadSecond")
               Using command As New SqlCommand(cmdText, conn)
                  command.Transaction = tran
                  command.ExecuteNonQuery()
               End Using
               tran.Commit()
            End Using
         End Using

         Console.WriteLine("Exit from the PhantomReadSecondThread.....")
      End Sub
   End Class


   ' Demonstrates if the specific transaction allows the following behaviors:
   ' 1. Dirty reads;
   ' 2. Non-repeatable reads;
   ' 3. Phantoms.
   NotInheritable Class TransactionIsolationLevels
      Private Sub New()
      End Sub
      Public Shared Sub DemonstrateIsolationLevel(connString As [String], level As IsolationLevel)
         ' Before connect the database, recreate the table.
         OperateDatabase.CreateTable(connString)
         DemonstrateIsolationLevel(connString, level, AddressOf DirtyReadThreads.DirtyReadFirstThread, AddressOf DirtyReadThreads.DirtyReadSecondThread)
         DisplayData(connString)
         Console.WriteLine()

         OperateDatabase.CreateTable(connString)
         DemonstrateIsolationLevel(connString, level, AddressOf NonrepeatableReadThreads.NonrepeatableReadFirstThread, AddressOf NonrepeatableReadThreads.NonrepeatableReadSecondThread)
         Console.WriteLine()

         OperateDatabase.CreateTable(connString)
         DemonstrateIsolationLevel(connString, level, AddressOf PhantomReadThreads.PhantomReadFirstThread, AddressOf PhantomReadThreads.PhantomReadSecondThread)
         Console.WriteLine()
      End Sub

      ' Demonstrates if the specific transaction allows the specific behaviors.
      Public Shared Sub DemonstrateIsolationLevel(connString As [String], level As IsolationLevel, firstThread As AsyncAccessDatabase, secondThread As AsyncAccessDatabase)
         ' Dim tasks As Task() = {Task.Factory.StartNew(Function() firstThread(connString, level)), Task.Factory.StartNew(Function() secondThread(connString, level))}

         Dim tasks() As Task = {
                         Task.Factory.StartNew(Sub() firstThread(connString, level)),
                         Task.Factory.StartNew(Sub() secondThread(connString, level))
                                        }

         Task.WaitAll(tasks)
      End Sub

      Private NotInheritable Class ExchangeValuesThreads
         Private Sub New()
         End Sub
         Public Shared Sub ExchangeValuesFirstThread(connStrig As [String], level As IsolationLevel)
            Console.WriteLine("Begin the ExchangeValuesFirstThread.....")

            Using conn As New SqlConnection(connStrig)
               Dim cmdText As [String] = "Use DbDataIsolationLevel;" & vbCr & vbLf & vbCr & vbLf &
                   "Declare @price money;" & vbCr & vbLf &
                   "select @price=Price from dbo.Products where ProductId=2;" & vbCr & vbLf & vbCr & vbLf &
                   "Update dbo.Products set Price=@price where ProductId=1;" & vbCr & vbLf & vbCr & vbLf &
                   "WaitFor Delay '00:00:06'; "

               conn.Open()
               Using tran As SqlTransaction = conn.BeginTransaction(level, "ExchangeValuesFirst")

                  Using command As New SqlCommand(cmdText, conn)
                     command.Transaction = tran
                     command.ExecuteNonQuery()
                  End Using

                  tran.Commit()
               End Using
            End Using

            Console.WriteLine("Exit from the ExchangeValuesFirstThread.....")
         End Sub

         Public Shared Sub ExchangeValuesSecondThread(connStrig As [String], level As IsolationLevel)
            Console.WriteLine("Begin the ExchangeValuesSecondThread.....")

            Using conn As New SqlConnection(connStrig)
               Dim cmdText As [String] = "Use DbDataIsolationLevel;" & vbCr & vbLf & vbCr & vbLf &
                   "WaitFor Delay '00:00:03'; " & vbCr & vbLf & vbCr & vbLf &
                   "Declare @price money;" & vbCr & vbLf &
                   "select @price=Price from dbo.Products where ProductId=1;" & vbCr & vbLf & vbCr & vbLf &
                   "Update dbo.Products set Price=@price where ProductId=2;"

               conn.Open()

               Using tran As SqlTransaction = conn.BeginTransaction(level, "ExchangeValuesSecond")
                  Using command As New SqlCommand(cmdText, conn)
                     command.Transaction = tran
                     command.ExecuteNonQuery()
                  End Using
                  tran.Commit()
               End Using
            End Using

            Console.WriteLine("Exit from the ExchangeValuesSecondThread.....")
         End Sub
      End Class

      ' Demonstrates the difference between the Serializable and Snapshot transaction
      Public Shared Sub DemonstrateBetweenSnapshotAndSerializable(connString As [String])
         OperateDatabase.CreateTable(connString)

         Console.WriteLine("Exchange Vaules in the Snapshot transaction:")
         DemonstrateIsolationLevel(connString, IsolationLevel.Snapshot, AddressOf ExchangeValuesThreads.ExchangeValuesFirstThread, AddressOf ExchangeValuesThreads.ExchangeValuesSecondThread)
         DisplayData(connString)
         Console.WriteLine()

         Console.WriteLine("Cannot Exchange Vaules in the Serializable transaction:")
         OperateDatabase.CreateTable(connString)
         DemonstrateIsolationLevel(connString, IsolationLevel.Serializable, AddressOf ExchangeValuesThreads.ExchangeValuesFirstThread, AddressOf ExchangeValuesThreads.ExchangeValuesSecondThread)
         DisplayData(connString)
      End Sub

      Public Shared Sub DisplayData(connString As [String])
         Using conn As New SqlConnection(connString)
            Dim cmdText As [String] = "Use DbDataIsolationLevel; " & vbCr & vbLf & vbCr & vbLf &
                "Select ProductId,ProductName,Quantity,Price" & vbCr & vbLf &
                "from dbo.Products"

            conn.Open()

            Using command As New SqlCommand(cmdText, conn)
               Using reader As SqlDataReader = command.ExecuteReader()
                  DisplayData(reader)
               End Using
            End Using
         End Using
      End Sub

      Public Shared Sub DisplayData(reader As SqlDataReader)
         Dim isFirst As [Boolean] = True

         While reader.Read()
            If isFirst Then
               isFirst = False

               For i As Integer = 0 To reader.FieldCount - 1
                  Console.Write("{0,-12}   ", reader.GetName(i))
               Next
               Console.WriteLine()
            End If

            For i As Integer = 0 To reader.FieldCount - 1
               Console.Write("{0,-12}   ", reader(i))
            Next
            Console.WriteLine()
         End While
      End Sub
   End Class

   ' This class includes database operations. If there's no database 'DbDataIsolationLevel', create the database.
   NotInheritable Class OperateDatabase
      Private Sub New()
      End Sub
      Public Shared Function CreateDatabase(connString As [String]) As [Boolean]
         Using conn As New SqlConnection(connString)
            Dim cmdText As [String] = "Use Master;" & vbCr & vbLf & vbCr & vbLf &
                "if Db_Id('DbDataIsolationLevel') is null" & vbCr & vbLf &
                "create Database [DbDataIsolationLevel];"

            Using command As New SqlCommand(cmdText, conn)
               conn.Open()
               command.ExecuteNonQuery()
            End Using

            Console.WriteLine("Create the Database 'DbDataIsolationLevel'")
         End Using

         Return True
      End Function


      ' If there's no table [dbo].[Products] in DbDataIsolationLevel, create the table; or recreate it.
      Public Shared Function CreateTable(connString As [String]) As [Boolean]
         Using conn As New SqlConnection(connString)
            Dim cmdText As [String] = "Use DbDataIsolationLevel" & vbCr & vbLf & vbCr & vbLf &
                "if Object_ID('[dbo].[Products]') is not null" & vbCr & vbLf &
                "drop table [dbo].[Products]" & vbCr & vbLf & vbCr & vbLf &
                "Create Table [dbo].[Products]" & vbCr & vbLf &
                "(" & vbCr & vbLf &
                "[ProductId] int IDENTITY(1,1) primary key," & vbCr & vbLf &
                "[ProductName] NVarchar(100) not null," & vbCr & vbLf &
                "[Quantity] int null," & vbCr & vbLf &
                "[Price] money null" & vbCr & vbLf & "                                    )"

            Using command As New SqlCommand(cmdText, conn)
               conn.Open()
               command.ExecuteNonQuery()
            End Using
         End Using

         Return InsertRows(connString)
      End Function

      ' Insert some rows into [dbo].[Products] table.
      Public Shared Function InsertRows(connString As [String]) As [Boolean]
         Using conn As New SqlConnection(connString)
            Dim cmdText As [String] = "Use DbDataIsolationLevel" & vbCr & vbLf & vbCr & vbLf &
                "INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Blue Bike', 365,1075.00)" & vbCr & vbLf &
                "INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Red Bike', 159, 1299.00)" & vbCr & vbLf &
                "INSERT [dbo].[Products] ([ProductName], [Quantity], [Price]) VALUES (N'Black Bike', 638, 1159.00)"

            Using command As New SqlCommand(cmdText, conn)
               conn.Open()
               command.ExecuteNonQuery()
            End Using
         End Using
         Return True
      End Function

      ' Turn on or off 'ALLOW_SNAPSHOT_ISOLATION'
      Public Shared Function SetSnapshot(connString As [String], isOpen As [Boolean]) As [Boolean]
         Using conn As New SqlConnection(connString)
            Dim cmdText As [String] = Nothing

            If isOpen Then
               cmdText = "ALTER DATABASE DbDataIsolationLevel SET ALLOW_SNAPSHOT_ISOLATION ON"
            Else
               cmdText = "ALTER DATABASE DbDataIsolationLevel SET ALLOW_SNAPSHOT_ISOLATION OFF"
            End If

            Using command As New SqlCommand(cmdText, conn)
               conn.Open()
               command.ExecuteNonQuery()
            End Using
         End Using

         Return True
      End Function
   End Class
   Class Program
      Public Shared Sub Main(args As String())
         Dim connString As [String] = "Data Source=(local);Initial Catalog=master;Integrated Security=True;Asynchronous Processing=true;"

         OperateDatabase.CreateDatabase(connString)
         Console.WriteLine()

         Console.WriteLine("Demonstrate the ReadUncommitted transaction: ")
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString, System.Data.IsolationLevel.ReadUncommitted)
         Console.WriteLine("-----------------------------------------------")

         Console.WriteLine("Demonstrate the ReadCommitted transaction: ")
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString, System.Data.IsolationLevel.ReadCommitted)
         Console.WriteLine("-----------------------------------------------")

         Console.WriteLine("Demonstrate the RepeatableRead transaction: ")
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString, System.Data.IsolationLevel.RepeatableRead)
         Console.WriteLine("-----------------------------------------------")

         Console.WriteLine("Demonstrate the Serializable transaction: ")
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString, System.Data.IsolationLevel.Serializable)
         Console.WriteLine("-----------------------------------------------")

         Console.WriteLine("Demonstrate the Snapshot transaction: ")
         OperateDatabase.SetSnapshot(connString, True)
         TransactionIsolationLevels.DemonstrateIsolationLevel(connString, System.Data.IsolationLevel.Snapshot)
         Console.WriteLine("-----------------------------------------------")

         Console.WriteLine("Demonstrate the difference between the Snapshot and Serializable transactions:")
         TransactionIsolationLevels.DemonstrateBetweenSnapshotAndSerializable(connString)
         OperateDatabase.SetSnapshot(connString, False)
         Console.WriteLine()
      End Sub
   End Class
End Namespace

備註

執行交易時，. IsolationLevel NET 數據提供者會使用這些值。

會 IsolationLevel 持續生效，直到明確變更為止，但可以隨時變更。新的值會在運行時間使用，而不是剖析時間。如果在交易期間變更，伺服器的預期行為就是將新的鎖定層級套用至剩餘的所有語句。

使用 OdbcTransaction時，如果您未設定或將它設定 OdbcTransaction.IsolationLevel 為 Unspecified，則交易會根據使用中驅動程式所決定的隔離等級來執行。

適用於

共用方式為

IsolationLevel 列舉

定義

欄位

範例

備註

適用於

其他資源