EventSourceCreationData.CategoryCount 屬性
定義
重要
部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。
取得或設定分類資源檔中的分類數目。
public:
property int CategoryCount { int get(); void set(int value); };public int CategoryCount { get; set; }member this.CategoryCount : int with get, setPublic Property CategoryCount As Integer屬性值
分類資源檔中的分類數目。 預設值為零。
例外狀況
屬性會設定為負值或大於 UInt16.MaxValue 的值。
範例
下列程式代碼範例會判斷名為 SampleApplicationSource 的事件來源是否已在本機計算機上註冊。 如果事件來源不存在，此範例會設定來源的訊息資源檔，並建立新的事件來源。 最後，程式代碼範例會使用 中的資源識別碼和中的DisplayNameMsgIdmessageFile資源檔案路徑，設定事件記錄檔的當地語系化顯示名稱。
void CreateEventSourceSample1( String^ messageFile )
{
String^ myLogName;
String^ sourceName = "SampleApplicationSource";
// Create the event source if it does not exist.
if ( !EventLog::SourceExists( sourceName ) )
{
// Create a new event source for the custom event log
// named "myNewLog."
myLogName = "myNewLog";
EventSourceCreationData ^ mySourceData = gcnew EventSourceCreationData( sourceName,myLogName );
// Set the message resource file that the event source references.
// All event resource identifiers correspond to text in this file.
if ( !System::IO::File::Exists( messageFile ) )
{
Console::WriteLine( "Input message resource file does not exist - {0}", messageFile );
messageFile = "";
}
else
{
// Set the specified file as the resource
// file for message text, category text, and
// message parameter strings.
mySourceData->MessageResourceFile = messageFile;
mySourceData->CategoryResourceFile = messageFile;
mySourceData->CategoryCount = CategoryCount;
mySourceData->ParameterResourceFile = messageFile;
Console::WriteLine( "Event source message resource file set to {0}", messageFile );
}
Console::WriteLine( "Registering new source for event log." );
EventLog::CreateEventSource( mySourceData );
}
else
{
// Get the event log corresponding to the existing source.
myLogName = EventLog::LogNameFromSourceName( sourceName, "." );
}
// Register the localized name of the event log.
// For example, the actual name of the event log is "myNewLog," but
// the event log name displayed in the Event Viewer might be
// "Sample Application Log" or some other application-specific
// text.
EventLog^ myEventLog = gcnew EventLog( myLogName,".",sourceName );
if ( messageFile->Length > 0 )
{
myEventLog->RegisterDisplayName( messageFile, DisplayNameMsgId );
}
}
static void CreateEventSourceSample1(string messageFile)
{
string myLogName;
string sourceName = "SampleApplicationSource";
// Create the event source if it does not exist.
if(!EventLog.SourceExists(sourceName))
{
// Create a new event source for the custom event log
// named "myNewLog."
myLogName = "myNewLog";
EventSourceCreationData mySourceData = new EventSourceCreationData(sourceName, myLogName);
// Set the message resource file that the event source references.
// All event resource identifiers correspond to text in this file.
if (!System.IO.File.Exists(messageFile))
{
Console.WriteLine("Input message resource file does not exist - {0}",
messageFile);
messageFile = "";
}
else
{
// Set the specified file as the resource
// file for message text, category text, and
// message parameter strings.
mySourceData.MessageResourceFile = messageFile;
mySourceData.CategoryResourceFile = messageFile;
mySourceData.CategoryCount = CategoryCount;
mySourceData.ParameterResourceFile = messageFile;
Console.WriteLine("Event source message resource file set to {0}",
messageFile);
}
Console.WriteLine("Registering new source for event log.");
EventLog.CreateEventSource(mySourceData);
}
else
{
// Get the event log corresponding to the existing source.
myLogName = EventLog.LogNameFromSourceName(sourceName,".");
}
// Register the localized name of the event log.
// For example, the actual name of the event log is "myNewLog," but
// the event log name displayed in the Event Viewer might be
// "Sample Application Log" or some other application-specific
// text.
EventLog myEventLog = new EventLog(myLogName, ".", sourceName);
if (messageFile.Length > 0)
{
myEventLog.RegisterDisplayName(messageFile, DisplayNameMsgId);
}
}
Public Shared Sub CreateEventSourceSample1(ByVal messageFile As String)
Dim myLogName As String
Dim sourceName As String = "SampleApplicationSource"
' Create the event source if it does not exist.
If Not EventLog.SourceExists(sourceName)
' Create a new event source for the custom event log
' named "myNewLog."
myLogName = "myNewLog"
Dim mySourceData As EventSourceCreationData = New EventSourceCreationData(sourceName, myLogName)
' Set the message resource file that the event source references.
' All event resource identifiers correspond to text in this file.
If Not System.IO.File.Exists(messageFile)
Console.WriteLine("Input message resource file does not exist - {0}", _
messageFile)
messageFile = ""
Else
' Set the specified file as the resource
' file for message text, category text and
' message parameters strings.
mySourceData.MessageResourceFile = messageFile
mySourceData.CategoryResourceFile = messageFile
mySourceData.CategoryCount = CategoryCount
mySourceData.ParameterResourceFile = messageFile
Console.WriteLine("Event source message resource file set to {0}", _
messageFile)
End If
Console.WriteLine("Registering new source for event log.")
EventLog.CreateEventSource(mySourceData)
Else
' Get the event log corresponding to the existing source.
myLogName = EventLog.LogNameFromSourceName(sourceName,".")
End If
' Register the localized name of the event log.
' For example, the actual name of the event log is "myNewLog," but
' the event log name displayed in the Event Viewer might be
' "Sample Application Log" or some other application-specific
' text.
Dim myEventLog As EventLog = New EventLog(myLogName, ".", sourceName)
If messageFile.Length > 0
myEventLog.RegisterDisplayName(messageFile, DisplayNameMsgId)
End If
End Sub
程式代碼範例會使用下列訊息文本檔，內建於資源庫 EventLogMsgs.dll。 訊息文本檔是建立訊息資源檔的來源。 訊息文字檔會定義類別、事件訊息和參數插入字串的資源識別碼和文字。
; // EventLogMsgs.mc
; // ********************************************************
; // Use the following commands to build this file:
; // mc -s EventLogMsgs.mc
; // rc EventLogMsgs.rc
; // link /DLL /SUBSYSTEM:WINDOWS /NOENTRY /MACHINE:x86 EventLogMsgs.Res
; // ********************************************************
; // - Event categories -
; // Categories must be numbered consecutively starting at 1.
; // ********************************************************
MessageId=0x1
Severity=Success
SymbolicName=INSTALL_CATEGORY
Language=English
Installation
.
MessageId=0x2
Severity=Success
SymbolicName=QUERY_CATEGORY
Language=English
Database Query
.
MessageId=0x3
Severity=Success
SymbolicName=REFRESH_CATEGORY
Language=English
Data Refresh
.
; // - Event messages -
; // *********************************
MessageId = 1000
Severity = Success
Facility = Application
SymbolicName = AUDIT_SUCCESS_MESSAGE_ID_1000
Language=English
My application message text, in English, for message id 1000, called from %1.
.
MessageId = 1001
Severity = Warning
Facility = Application
SymbolicName = AUDIT_FAILED_MESSAGE_ID_1001
Language=English
My application message text, in English, for message id 1001, called from %1.
.
MessageId = 1002
Severity = Success
Facility = Application
SymbolicName = GENERIC_INFO_MESSAGE_ID_1002
Language=English
My generic information message in English, for message id 1002.
.
MessageId = 1003
Severity = Warning
Facility = Application
SymbolicName = GENERIC_WARNING_MESSAGE_ID_1003
Language=English
My generic warning message in English, for message id 1003, called from %1.
.
MessageId = 1004
Severity = Success
Facility = Application
SymbolicName = UPDATE_CYCLE_COMPLETE_MESSAGE_ID_1004
Language=English
The update cycle is complete for %%5002.
.
MessageId = 1005
Severity = Warning
Facility = Application
SymbolicName = SERVER_CONNECTION_DOWN_MESSAGE_ID_1005
Language=English
The refresh operation did not complete because the connection to server %1 could not be established.
.
; // - Event log display name -
; // ********************************************************
MessageId = 5001
Severity = Success
Facility = Application
SymbolicName = EVENT_LOG_DISPLAY_NAME_MSGID
Language=English
Sample Event Log
.
; // - Event message parameters -
; // Language independent insertion strings
; // ********************************************************
MessageId = 5002
Severity = Success
Facility = Application
SymbolicName = EVENT_LOG_SERVICE_NAME_MSGID
Language=English
SVC_UPDATE.EXE
.
備註
CategoryCount使用和 CategoryResourceFile 屬性來撰寫具有本地化類別字串的事件。 如果您撰寫事件時提供類別，事件檢視器 會顯示事件項目的類別。 事件記錄檔類別是應用程式定義的字串，可協助篩選事件，或提供有關事件的進一步資訊。 例如，您的應用程式可以針對不同的元件或不同的作業定義不同的類別。
事件類別目錄是選擇性的;如果您的應用程式未使用類別，請勿設定 CategoryCount 和 CategoryResourceFile 屬性。
如需定義事件訊息和建置事件資源檔的詳細資訊，請參閱 Platform SDK 檔中的 訊息編譯 程式一文。
