共用方式為


Graphics.DrawPolygon 方法

定義

繪製由 Point 結構數位定義的多邊形。

多載

DrawPolygon(Pen, Point[])

繪製由 Point 結構數位定義的多邊形。

DrawPolygon(Pen, PointF[])

繪製由 PointF 結構數位定義的多邊形。

DrawPolygon(Pen, ReadOnlySpan<Point>)
DrawPolygon(Pen, ReadOnlySpan<PointF>)

DrawPolygon(Pen, Point[])

來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs

繪製由 Point 結構數位定義的多邊形。

public:
 void DrawPolygon(System::Drawing::Pen ^ pen, cli::array <System::Drawing::Point> ^ points);
public:
 void DrawPolygon(System::Drawing::Pen ^ pen, ... cli::array <System::Drawing::Point> ^ points);
public void DrawPolygon (System.Drawing.Pen pen, System.Drawing.Point[] points);
public void DrawPolygon (System.Drawing.Pen pen, params System.Drawing.Point[] points);
member this.DrawPolygon : System.Drawing.Pen * System.Drawing.Point[] -> unit
Public Sub DrawPolygon (pen As Pen, points As Point())
Public Sub DrawPolygon (pen As Pen, ParamArray points As Point())

參數

pen
Pen

Pen,決定多邊形的色彩、寬度和樣式。

points
Point[]

代表多邊形頂點的 Point 結構陣列。

例外狀況

pen null

範例

下列程式代碼範例是專為搭配 Windows Forms 使用而設計,而且需要 PaintEventArgse,這是 Paint 事件處理程式的參數。 程式代碼會執行下列動作:

  • 建立黑色畫筆。

  • 建立多邊形頂點的七點陣列。

  • 將多邊形繪製到螢幕。

public:
   void DrawPolygonPoint( PaintEventArgs^ e )
   {
      // Create pen.
      Pen^ blackPen = gcnew Pen( Color::Black,3.0f );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->DrawPolygon( blackPen, curvePoints );
   }
public void DrawPolygonPoint(PaintEventArgs e)
{
             
    // Create pen.
    Pen blackPen = new Pen(Color.Black, 3);
             
    // Create points that define polygon.
    Point point1 = new Point(50,  50);
    Point point2 = new Point(100,  25);
    Point point3 = new Point(200,   5);
    Point point4 = new Point(250,  50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints =
             {
                 point1,
                 point2,
                 point3,
                 point4,
                 point5,
                 point6,
                 point7
             };
             
    // Draw polygon to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints);
}
Public Sub DrawPolygonPoint(ByVal e As PaintEventArgs)

    ' Create pen.
    Dim blackPen As New Pen(Color.Black, 3)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints)
End Sub

備註

陣列中每對兩個連續點都會指定多邊形的一側。 此外,如果陣列的最後一個點和第一個點不一致,它們就會指定多邊形的最後一端。

適用於

DrawPolygon(Pen, PointF[])

來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs
來源:
Graphics.cs

繪製由 PointF 結構數位定義的多邊形。

public:
 void DrawPolygon(System::Drawing::Pen ^ pen, cli::array <System::Drawing::PointF> ^ points);
public:
 void DrawPolygon(System::Drawing::Pen ^ pen, ... cli::array <System::Drawing::PointF> ^ points);
public void DrawPolygon (System.Drawing.Pen pen, System.Drawing.PointF[] points);
public void DrawPolygon (System.Drawing.Pen pen, params System.Drawing.PointF[] points);
member this.DrawPolygon : System.Drawing.Pen * System.Drawing.PointF[] -> unit
Public Sub DrawPolygon (pen As Pen, points As PointF())
Public Sub DrawPolygon (pen As Pen, ParamArray points As PointF())

參數

pen
Pen

Pen,決定多邊形的色彩、寬度和樣式。

points
PointF[]

代表多邊形頂點的 PointF 結構陣列。

例外狀況

pen null

-或-

points null

範例

下列程式代碼範例是專為搭配 Windows Forms 使用而設計,而且需要 PaintEventArgse,這是 Paint 事件處理程式的參數。 程式代碼會執行下列動作:

  • 建立黑色畫筆。

  • 建立多邊形頂點的七點陣列。

  • 將多邊形繪製到螢幕。

public:
   void DrawPolygonPointF( PaintEventArgs^ e )
   {
      // Create pen.
      Pen^ blackPen = gcnew Pen( Color::Black,3.0f );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon curve to screen.
      e->Graphics->DrawPolygon( blackPen, curvePoints );
   }
public void DrawPolygonPointF(PaintEventArgs e)
{
             
    // Create pen.
    Pen blackPen = new Pen(Color.Black, 3);
             
    // Create points that define polygon.
    PointF point1 = new PointF(50.0F,  50.0F);
    PointF point2 = new PointF(100.0F,  25.0F);
    PointF point3 = new PointF(200.0F,   5.0F);
    PointF point4 = new PointF(250.0F,  50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints =
             {
                 point1,
                 point2,
                 point3,
                 point4,
                 point5,
                 point6,
                 point7
             };
             
    // Draw polygon curve to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints);
}
Public Sub DrawPolygonPointF(ByVal e As PaintEventArgs)

    ' Create pen.
    Dim blackPen As New Pen(Color.Black, 3)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon curve to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints)
End Sub

備註

陣列中每對兩個連續點都會指定多邊形的一側。 此外,如果最後一個點和數位點的第一個不一致,它們會指定多邊形的最後一端。

適用於

DrawPolygon(Pen, ReadOnlySpan<Point>)

來源:
Graphics.cs
來源:
Graphics.cs
public:
 void DrawPolygon(System::Drawing::Pen ^ pen, ReadOnlySpan<System::Drawing::Point> points);
public void DrawPolygon (System.Drawing.Pen pen, scoped ReadOnlySpan<System.Drawing.Point> points);
member this.DrawPolygon : System.Drawing.Pen * ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub DrawPolygon (pen As Pen, points As ReadOnlySpan(Of Point))

參數

pen
Pen

適用於

DrawPolygon(Pen, ReadOnlySpan<PointF>)

來源:
Graphics.cs
來源:
Graphics.cs
public:
 void DrawPolygon(System::Drawing::Pen ^ pen, ReadOnlySpan<System::Drawing::PointF> points);
public void DrawPolygon (System.Drawing.Pen pen, scoped ReadOnlySpan<System.Drawing.PointF> points);
member this.DrawPolygon : System.Drawing.Pen * ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub DrawPolygon (pen As Pen, points As ReadOnlySpan(Of PointF))

參數

pen
Pen

適用於