Graphics.FillPie 方法
定義
重要
部分資訊涉及發行前產品,在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊,不做任何明確或隱含的瑕疵擔保。
填滿由座標對、寬度、高度和兩條放射線指定的橢圓形所定義的派形區域內部。
多載
FillPie(Brush, Rectangle, Single, Single) |
填滿由 RectangleF 結構和兩條放射線指定的橢圓形所定義的派形區段的內部。 |
FillPie(Brush, RectangleF, Single, Single) |
填滿橢圓形和兩條星形線所定義的餅圖區段內部。 |
FillPie(Brush, Int32, Int32, Int32, Int32, Int32, Int32) |
填滿由座標對、寬度、高度和兩條放射線指定的橢圓形所定義的派形區域內部。 |
FillPie(Brush, Single, Single, Single, Single, Single, Single) |
填滿由座標對、寬度、高度和兩條放射線指定的橢圓形所定義的派形區域內部。 |
FillPie(Brush, Rectangle, Single, Single)
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
填滿由 RectangleF 結構和兩條放射線指定的橢圓形所定義的派形區段的內部。
public:
void FillPie(System::Drawing::Brush ^ brush, System::Drawing::Rectangle rect, float startAngle, float sweepAngle);
public void FillPie (System.Drawing.Brush brush, System.Drawing.Rectangle rect, float startAngle, float sweepAngle);
member this.FillPie : System.Drawing.Brush * System.Drawing.Rectangle * single * single -> unit
Public Sub FillPie (brush As Brush, rect As Rectangle, startAngle As Single, sweepAngle As Single)
參數
- startAngle
- Single
以度為單位,依順時針方向測量之從 X 軸到派形區段的第一個邊的角度。
- sweepAngle
- Single
以度為單位,依順時針方向從 startAngle
參數到派形區段的第二個邊的角度。
例外狀況
brush
為 null
。
範例
下列程式代碼範例是設計來搭配 Windows Forms 使用,而且需要 PaintEventArgse
,這是事件處理程序的參數Paint。 此程式碼會執行下列動作:
建立實心紅色筆刷。
建立限定橢圓形的矩形。
定義相對於 x 軸) 的開始角度 (,並以順時針方向) 兩者 (掃掠角度。
填滿螢幕上橢圓形的餅形區域。
public:
void FillPieRectangle( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create rectangle for ellipse.
Rectangle rect = Rectangle(0,0,200,100);
// Create start and sweep angles.
float startAngle = 0.0F;
float sweepAngle = 45.0F;
// Fill pie to screen.
e->Graphics->FillPie( redBrush, rect, startAngle, sweepAngle );
}
public void FillPieRectangle(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create rectangle for ellipse.
Rectangle rect = new Rectangle(0, 0, 200, 100);
// Create start and sweep angles.
float startAngle = 0.0F;
float sweepAngle = 45.0F;
// Fill pie to screen.
e.Graphics.FillPie(redBrush, rect, startAngle, sweepAngle);
}
Public Sub FillPieRectangle(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create rectangle for ellipse.
Dim rect As New Rectangle(0, 0, 200, 100)
' Create start and sweep angles.
Dim startAngle As Single = 0.0F
Dim sweepAngle As Single = 45.0F
' Fill pie to screen.
e.Graphics.FillPie(redBrush, rect, startAngle, sweepAngle)
End Sub
備註
這個方法會填滿橢圓形弧線所定義的餅圖區段內部,以及與弧線端點交集的兩條星形線。橢圓形是由周框所定義。 餅圖區段是由 和 sweepAngle
參數所startAngle
定義的兩條星形線所組成,以及這些星形線與橢圓形線交集之間的弧線。
sweepAngle
如果 參數大於 360 度或小於 -360 度,則會分別視為 360 度或 -360 度。
適用於
FillPie(Brush, RectangleF, Single, Single)
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
填滿橢圓形和兩條星形線所定義的餅圖區段內部。
public:
void FillPie(System::Drawing::Brush ^ brush, System::Drawing::RectangleF rect, float startAngle, float sweepAngle);
public void FillPie (System.Drawing.Brush brush, System.Drawing.RectangleF rect, float startAngle, float sweepAngle);
member this.FillPie : System.Drawing.Brush * System.Drawing.RectangleF * single * single -> unit
Public Sub FillPie (brush As Brush, rect As RectangleF, startAngle As Single, sweepAngle As Single)
參數
- brush
- Brush
決定填滿特性的筆刷。
- rect
- RectangleF
周框,定義餅圖區段的來源橢圓形。
- startAngle
- Single
以度為單位,依順時針方向測量之從 X 軸到派形區段的第一個邊的角度。
- sweepAngle
- Single
以度為單位,依順時針方向從 startAngle
參數到派形區段的第二個邊的角度。
適用於
FillPie(Brush, Int32, Int32, Int32, Int32, Int32, Int32)
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
填滿由座標對、寬度、高度和兩條放射線指定的橢圓形所定義的派形區域內部。
public:
void FillPie(System::Drawing::Brush ^ brush, int x, int y, int width, int height, int startAngle, int sweepAngle);
public void FillPie (System.Drawing.Brush brush, int x, int y, int width, int height, int startAngle, int sweepAngle);
member this.FillPie : System.Drawing.Brush * int * int * int * int * int * int -> unit
Public Sub FillPie (brush As Brush, x As Integer, y As Integer, width As Integer, height As Integer, startAngle As Integer, sweepAngle As Integer)
參數
- x
- Int32
周框左上角的 X 座標,這個周框定義派形區段的來源橢圓形。
- y
- Int32
周框左上角的 X 座標,這個周框定義派形區段的來源橢圓形。
- width
- Int32
周框的寬度,這個周框定義派形區段的來源橢圓形。
- height
- Int32
周框的高度,這個周框定義派形區段的來源橢圓形。
- startAngle
- Int32
以度為單位,依順時針方向測量之從 X 軸到派形區段的第一個邊的角度。
- sweepAngle
- Int32
以度為單位,依順時針方向從 startAngle
參數到派形區段的第二個邊的角度。
例外狀況
brush
為 null
。
範例
下列程式代碼範例是設計來搭配 Windows Forms 使用,而且需要 PaintEventArgse
,這是事件處理程序的參數Paint。 此程式碼會執行下列動作:
建立實心紅色筆刷。
建立限定橢圓形之矩形的位置和大小。
定義相對於 x 軸) 的開始角度 (,並以順時針方向) 兩者 (掃掠角度。
填滿螢幕上橢圓形的餅形區域。
public:
void FillPieInt( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create location and size of ellipse.
int x = 0;
int y = 0;
int width = 200;
int height = 100;
// Create start and sweep angles.
int startAngle = 0;
int sweepAngle = 45;
// Fill pie to screen.
e->Graphics->FillPie( redBrush, x, y, width, height, startAngle, sweepAngle );
}
public void FillPieInt(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create location and size of ellipse.
int x = 0;
int y = 0;
int width = 200;
int height = 100;
// Create start and sweep angles.
int startAngle = 0;
int sweepAngle = 45;
// Fill pie to screen.
e.Graphics.FillPie(redBrush, x, y, width, height, startAngle, sweepAngle);
}
Public Sub FillPieInt(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create location and size of ellipse.
Dim x As Integer = 0
Dim y As Integer = 0
Dim width As Integer = 200
Dim height As Integer = 100
' Create start and sweep angles.
Dim startAngle As Integer = 0
Dim sweepAngle As Integer = 45
' Fill pie to screen.
e.Graphics.FillPie(redBrush, x, y, width, height, startAngle, _
sweepAngle)
End Sub
備註
這個方法會填滿橢圓形弧線所定義的餅圖區段內部,以及與弧線端點交集的兩條星形線。橢圓形是由周框所定義。 餅圖區段是由 和 sweepAngle
參數所startAngle
定義的兩條星形線所組成,以及這些星形線與橢圓形線交集之間的弧線。
sweepAngle
如果 參數大於 360 度或小於 -360 度,則會分別視為 360 度或 -360 度。
適用於
FillPie(Brush, Single, Single, Single, Single, Single, Single)
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
- 來源:
- Graphics.cs
填滿由座標對、寬度、高度和兩條放射線指定的橢圓形所定義的派形區域內部。
public:
void FillPie(System::Drawing::Brush ^ brush, float x, float y, float width, float height, float startAngle, float sweepAngle);
public void FillPie (System.Drawing.Brush brush, float x, float y, float width, float height, float startAngle, float sweepAngle);
member this.FillPie : System.Drawing.Brush * single * single * single * single * single * single -> unit
Public Sub FillPie (brush As Brush, x As Single, y As Single, width As Single, height As Single, startAngle As Single, sweepAngle As Single)
參數
- x
- Single
周框左上角的 X 座標,這個周框定義派形區段的來源橢圓形。
- y
- Single
周框左上角的 X 座標,這個周框定義派形區段的來源橢圓形。
- width
- Single
周框的寬度,這個周框定義派形區段的來源橢圓形。
- height
- Single
周框的高度,這個周框定義派形區段的來源橢圓形。
- startAngle
- Single
以度為單位,依順時針方向測量之從 X 軸到派形區段的第一個邊的角度。
- sweepAngle
- Single
以度為單位,依順時針方向從 startAngle
參數到派形區段的第二個邊的角度。
例外狀況
brush
為 null
。
範例
下列程式代碼範例是設計來搭配 Windows Forms 使用,而且需要 PaintEventArgse
,這是事件處理程序的參數Paint。 此程式碼會執行下列動作:
建立實心紅色筆刷。
建立限定橢圓形之矩形的位置和大小。
定義相對於 x 軸) 的開始角度 (,並以順時針方向) 兩者 (掃掠角度。
填滿螢幕上橢圓形的餅形區域。
public:
void FillPieFloat( PaintEventArgs^ e )
{
// Create solid brush.
SolidBrush^ redBrush = gcnew SolidBrush( Color::Red );
// Create location and size of ellipse.
float x = 0.0F;
float y = 0.0F;
float width = 200.0F;
float height = 100.0F;
// Create start and sweep angles.
float startAngle = 0.0F;
float sweepAngle = 45.0F;
// Fill pie to screen.
e->Graphics->FillPie( redBrush, x, y, width, height, startAngle, sweepAngle );
}
public void FillPieFloat(PaintEventArgs e)
{
// Create solid brush.
SolidBrush redBrush = new SolidBrush(Color.Red);
// Create location and size of ellipse.
float x = 0.0F;
float y = 0.0F;
float width = 200.0F;
float height = 100.0F;
// Create start and sweep angles.
float startAngle = 0.0F;
float sweepAngle = 45.0F;
// Fill pie to screen.
e.Graphics.FillPie(redBrush, x, y, width, height, startAngle, sweepAngle);
}
Public Sub FillPieFloat(ByVal e As PaintEventArgs)
' Create solid brush.
Dim redBrush As New SolidBrush(Color.Red)
' Create location and size of ellipse.
Dim x As Single = 0.0F
Dim y As Single = 0.0F
Dim width As Single = 200.0F
Dim height As Single = 100.0F
' Create start and sweep angles.
Dim startAngle As Single = 0.0F
Dim sweepAngle As Single = 45.0F
' Fill pie to screen.
e.Graphics.FillPie(redBrush, x, y, width, height, startAngle, _
sweepAngle)
End Sub
備註
這個方法會填滿橢圓形弧線所定義的餅圖區段內部,以及與弧線端點交集的兩條星形線。橢圓形是由周框所定義。 餅圖區段是由 和 sweepAngle
參數所startAngle
定義的兩條星形線所組成,以及這些星形線與橢圓形線交集之間的弧線。
sweepAngle
如果 參數大於 360 度或小於 -360 度,則會分別視為 360 度或 -360 度。
適用於
意見反應
https://aka.ms/ContentUserFeedback。
即將登場:在 2024 年,我們將逐步淘汰 GitHub 問題作為內容的意見反應機制,並將它取代為新的意見反應系統。 如需詳細資訊,請參閱:提交並檢視相關的意見反應