共用方式為


EventWaitHandleSecurity.RemoveAccessRuleAll(EventWaitHandleAccessRule) 方法

定義

搜尋與指定規則具有相同使用者和 AccessControlType (允許或拒絕) 的所有存取控制規則,如果找到的話,便加以移除。

public:
 void RemoveAccessRuleAll(System::Security::AccessControl::EventWaitHandleAccessRule ^ rule);
public void RemoveAccessRuleAll (System.Security.AccessControl.EventWaitHandleAccessRule rule);
override this.RemoveAccessRuleAll : System.Security.AccessControl.EventWaitHandleAccessRule -> unit
Public Sub RemoveAccessRuleAll (rule As EventWaitHandleAccessRule)

參數

rule
EventWaitHandleAccessRule

EventWaitHandleAccessRule,指定要搜尋的使用者和 AccessControlType。 忽略根據此規則指定的任何權限。

例外狀況

rulenull

範例

下列程式代碼範例顯示 RemoveAccessRuleAll 方法會移除符合使用者和 AccessControlType的所有規則,並忽略許可權。

此範例會 EventWaitHandleSecurity 建立 物件、新增規則,以允許和拒絕目前使用者的各種許可權,然後將其他許可權合併至 Allow 規則。 然後,此範例會建立新的規則,以允許目前的使用者取得擁有權,並使用該規則從 EventWaitHandleSecurity 物件中移除Allow規則。

注意

這個範例不會將安全性物件附加至 EventWaitHandle 物件。 您可以在和 EventWaitHandle.SetAccessControl中找到EventWaitHandle.GetAccessControl附加安全性物件的範例。

using System;
using System.Threading;
using System.Security.AccessControl;
using System.Security.Principal;

public class Example
{
    public static void Main()
    {
        // Create a string representing the current user.
        string user = Environment.UserDomainName + "\\" + 
            Environment.UserName;

        // Create a security object that grants no access.
        EventWaitHandleSecurity mSec = new EventWaitHandleSecurity();

        // Add a rule that grants the current user the 
        // right to wait on or signal the event.
        EventWaitHandleAccessRule rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.Synchronize | EventWaitHandleRights.Modify, 
            AccessControlType.Allow);
        mSec.AddAccessRule(rule);

        // Add a rule that denies the current user the 
        // right to change permissions on the event.
        rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.ChangePermissions, 
            AccessControlType.Deny);
        mSec.AddAccessRule(rule);

        // Display the rules in the security object.
        ShowSecurity(mSec);

        // Add a rule that allows the current user the 
        // right to read permissions on the event. This rule
        // is merged with the existing Allow rule.
        rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.ReadPermissions, 
            AccessControlType.Allow);
        mSec.AddAccessRule(rule);

        ShowSecurity(mSec);

        // Create a rule that allows the current user to
        // take ownership of the event, and use that rule 
        // to remove the existing Allow rule from the
        // EventWaitHandleSecurity object, showing that the user
        // and access type must match, while the rights are
        // ignored.
        Console.WriteLine("Use RemoveAccessRuleAll to remove the Allow rule.");
        rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.TakeOwnership, 
            AccessControlType.Allow);
        mSec.RemoveAccessRuleAll(rule);

        ShowSecurity(mSec);
    }

    private static void ShowSecurity(EventWaitHandleSecurity security)
    {
        Console.WriteLine("\r\nCurrent access rules:\r\n");

        foreach(EventWaitHandleAccessRule ar in 
            security.GetAccessRules(true, true, typeof(NTAccount)))
        {
            Console.WriteLine("        User: {0}", ar.IdentityReference);
            Console.WriteLine("        Type: {0}", ar.AccessControlType);
            Console.WriteLine("      Rights: {0}", ar.EventWaitHandleRights);
            Console.WriteLine();
        }
    }
}

/*This code example produces output similar to following:

Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions

        User: TestDomain\TestUser
        Type: Allow
      Rights: Modify, Synchronize


Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions

        User: TestDomain\TestUser
        Type: Allow
      Rights: Modify, ReadPermissions, Synchronize

Use RemoveAccessRuleAll to remove the Allow rule.

Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions
 */
Imports System.Threading
Imports System.Security.AccessControl
Imports System.Security.Principal

Public Class Example

    Public Shared Sub Main()

        ' Create a string representing the current user.
        Dim user As String = Environment.UserDomainName _ 
            & "\" & Environment.UserName

        ' Create a security object that grants no access.
        Dim mSec As New EventWaitHandleSecurity()

        ' Add a rule that grants the current user the 
        ' right to wait on or signal the event.
        Dim rule As New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.Synchronize _
            Or EventWaitHandleRights.Modify, _
            AccessControlType.Allow)
        mSec.AddAccessRule(rule)

        ' Add a rule that denies the current user the 
        ' right to change permissions on the event.
        rule = New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.ChangePermissions, _
            AccessControlType.Deny)
        mSec.AddAccessRule(rule)

        ' Display the rules in the security object.
        ShowSecurity(mSec)

        ' Add a rule that allows the current user the 
        ' right to read permissions on the event. This rule
        ' is merged with the existing Allow rule.
        rule = New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.ReadPermissions, _
            AccessControlType.Allow)
        mSec.AddAccessRule(rule)

        ShowSecurity(mSec)

        ' Create a rule that allows the current user to
        ' take ownership of the event, and use that rule 
        ' to remove the existing allow access rule from 
        ' the EventWaitHandleSecurity object, showing that the user
        ' and access type must match, while the rights are
        ' ignored.
        Console.WriteLine("Use RemoveAccessRuleAll to remove the Allow rule.")
        rule = New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.TakeOwnership, _
            AccessControlType.Allow)
        mSec.RemoveAccessRuleAll(rule)

        ShowSecurity(mSec)
        
    End Sub 

    Private Shared Sub ShowSecurity(ByVal security As EventWaitHandleSecurity)
        Console.WriteLine(vbCrLf & "Current access rules:" & vbCrLf)

        For Each ar As EventWaitHandleAccessRule In _
            security.GetAccessRules(True, True, GetType(NTAccount))

            Console.WriteLine("        User: {0}", ar.IdentityReference)
            Console.WriteLine("        Type: {0}", ar.AccessControlType)
            Console.WriteLine("      Rights: {0}", ar.EventWaitHandleRights)
            Console.WriteLine()
        Next

    End Sub
End Class 

'This code example produces output similar to following:
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions
'
'        User: TestDomain\TestUser
'        Type: Allow
'      Rights: Modify, Synchronize
'
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions
'
'        User: TestDomain\TestUser
'        Type: Allow
'      Rights: Modify, ReadPermissions, Synchronize
'
'Use RemoveAccessRuleAll to remove the Allow rule.
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions

備註

系統會搜尋目前的 EventWaitHandleSecurity 規則,這些規則具有相同的使用者和與 rule相同的AccessControlType值。 執行此搜尋時,會忽略 所 rule 指定的任何許可權。 所有相符的規則都會移除。 如果找不到相符的規則,則不會採取任何動作。

適用於