共用方式為


EventWaitHandleSecurity.RemoveAccessRuleSpecific 方法

定義

搜尋與指定規則完全相符的存取控制規則,如果找到的話,便加以移除。

public:
 void RemoveAccessRuleSpecific(System::Security::AccessControl::EventWaitHandleAccessRule ^ rule);
public void RemoveAccessRuleSpecific (System.Security.AccessControl.EventWaitHandleAccessRule rule);
override this.RemoveAccessRuleSpecific : System.Security.AccessControl.EventWaitHandleAccessRule -> unit
Public Sub RemoveAccessRuleSpecific (rule As EventWaitHandleAccessRule)

參數

例外狀況

rulenull

範例

下列程式代碼範例顯示 RemoveAccessRuleSpecific 方法需要完全相符才能移除規則,以及允許和拒絕許可權的規則彼此獨立。

此範例會 EventWaitHandleSecurity 建立 物件、新增允許和拒絕目前使用者各種許可權的規則,然後將其他許可權合併至 Allow 存取規則。 此範例接著會將原始 Allow 規則傳遞至 RemoveAccessRuleSpecific 方法,並顯示結果,顯示不會刪除任何專案。 然後,此範例會建構符合 Allow 對象中 EventWaitHandleSecurity 規則的規則,並成功使用 RemoveAccessRuleSpecific 方法來移除規則。

注意

這個範例不會將安全性物件附加至 EventWaitHandle 物件。 您可以在和 EventWaitHandle.SetAccessControl中找到EventWaitHandle.GetAccessControl附加安全性物件的範例。

using System;
using System.Threading;
using System.Security.AccessControl;
using System.Security.Principal;

public class Example
{
    public static void Main()
    {
        // Create a string representing the current user.
        string user = Environment.UserDomainName + "\\" + 
            Environment.UserName;

        // Create a security object that grants no access.
        EventWaitHandleSecurity mSec = new EventWaitHandleSecurity();

        // Add a rule that grants the current user the 
        // right to wait on or signal the event.
        EventWaitHandleAccessRule ruleA = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.Synchronize | EventWaitHandleRights.Modify, 
            AccessControlType.Allow);
        mSec.AddAccessRule(ruleA);

        // Add a rule that denies the current user the 
        // right to change permissions on the event.
        EventWaitHandleAccessRule rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.ChangePermissions, 
            AccessControlType.Deny);
        mSec.AddAccessRule(rule);

        // Display the rules in the security object.
        ShowSecurity(mSec);

        // Add a rule that allows the current user the 
        // right to read permissions on the event. This rule
        // is merged with the existing Allow rule.
        rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.ReadPermissions, 
            AccessControlType.Allow);
        mSec.AddAccessRule(rule);

        ShowSecurity(mSec);

        // Attempt to remove the original rule (granting
        // the right to wait on or signal the event) with 
        // RemoveAccessRuleSpecific. The removal fails,
        // because the right to read the permissions on the 
        // event has been added to the rule, so that it no 
        // longer matches the original rule.
        Console.WriteLine("Attempt to use RemoveAccessRuleSpecific on the original rule.");
        mSec.RemoveAccessRuleSpecific(ruleA);

        ShowSecurity(mSec);

        // Create a rule that grants the current user 
        // the right to wait on or signal the event, and
        // to read permissions. Use this rule to remove
        // the Allow rule for the current user.
        Console.WriteLine("Use RemoveAccessRuleSpecific with the correct rights.");
        rule = new EventWaitHandleAccessRule(user, 
            EventWaitHandleRights.Synchronize | EventWaitHandleRights.Modify | 
                EventWaitHandleRights.ReadPermissions, 
            AccessControlType.Allow);
        mSec.RemoveAccessRuleSpecific(rule);

        ShowSecurity(mSec);
    }

    private static void ShowSecurity(EventWaitHandleSecurity security)
    {
        Console.WriteLine("\r\nCurrent access rules:\r\n");

        foreach(EventWaitHandleAccessRule ar in 
            security.GetAccessRules(true, true, typeof(NTAccount)))
        {
            Console.WriteLine("        User: {0}", ar.IdentityReference);
            Console.WriteLine("        Type: {0}", ar.AccessControlType);
            Console.WriteLine("      Rights: {0}", ar.EventWaitHandleRights);
            Console.WriteLine();
        }
    }
}

/*This code example produces output similar to following:

Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions

        User: TestDomain\TestUser
        Type: Allow
      Rights: Modify, Synchronize


Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions

        User: TestDomain\TestUser
        Type: Allow
      Rights: Modify, ReadPermissions, Synchronize

Attempt to use RemoveAccessRuleSpecific on the original rule.

Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions

        User: TestDomain\TestUser
        Type: Allow
      Rights: Modify, ReadPermissions, Synchronize

Use RemoveAccessRuleSpecific with the correct rights.

Current access rules:

        User: TestDomain\TestUser
        Type: Deny
      Rights: ChangePermissions
 */
Imports System.Threading
Imports System.Security.AccessControl
Imports System.Security.Principal

Public Class Example

    Public Shared Sub Main()

        ' Create a string representing the current user.
        Dim user As String = Environment.UserDomainName _ 
            & "\" & Environment.UserName

        ' Create a security object that grants no access.
        Dim mSec As New EventWaitHandleSecurity()

        ' Add a rule that grants the current user the 
        ' right to wait on or signal the event.
        Dim ruleA As New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.Synchronize _
            Or EventWaitHandleRights.Modify, _
            AccessControlType.Allow)
        mSec.AddAccessRule(ruleA)

        ' Add a rule that denies the current user the 
        ' right to change permissions on the event.
        Dim rule As New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.ChangePermissions, _
            AccessControlType.Deny)
        mSec.AddAccessRule(rule)

        ' Display the rules in the security object.
        ShowSecurity(mSec)

        ' Add a rule that allows the current user the 
        ' right to read permissions on the event. This rule
        ' is merged with the existing Allow rule.
        rule = New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.ReadPermissions, _
            AccessControlType.Allow)
        mSec.AddAccessRule(rule)

        ShowSecurity(mSec)

        ' Attempt to remove the original rule (granting
        ' the right to wait on or signal the event) with 
        ' RemoveAccessRuleSpecific. The removal fails,
        ' because the right to read the permissions on the 
        ' event has been added to the rule, so that it no 
        ' longer matches the original rule.
        Console.WriteLine("Attempt to use RemoveAccessRuleSpecific on the original rule.")
        mSec.RemoveAccessRuleSpecific(ruleA)

        ShowSecurity(mSec)

        ' Create a rule that grants the current user 
        ' the right to wait on or signal the event, and
        ' to read permissions. Use this rule to remove
        ' the Allow rule for the current user.
        Console.WriteLine("Use RemoveAccessRuleSpecific with the correct rights.")
        rule = New EventWaitHandleAccessRule(user, _
            EventWaitHandleRights.Synchronize _
            Or EventWaitHandleRights.Modify _
            Or EventWaitHandleRights.ReadPermissions, _
            AccessControlType.Allow)
        mSec.RemoveAccessRuleSpecific(rule)

        ShowSecurity(mSec)
        
    End Sub 

    Private Shared Sub ShowSecurity(ByVal security As EventWaitHandleSecurity)
        Console.WriteLine(vbCrLf & "Current access rules:" & vbCrLf)

        For Each ar As EventWaitHandleAccessRule In _
            security.GetAccessRules(True, True, GetType(NTAccount))

            Console.WriteLine("        User: {0}", ar.IdentityReference)
            Console.WriteLine("        Type: {0}", ar.AccessControlType)
            Console.WriteLine("      Rights: {0}", ar.EventWaitHandleRights)
            Console.WriteLine()
        Next

    End Sub
End Class 

'This code example produces output similar to following:
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions
'
'        User: TestDomain\TestUser
'        Type: Allow
'      Rights: Modify, Synchronize
'
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions
'
'        User: TestDomain\TestUser
'        Type: Allow
'      Rights: Modify, ReadPermissions, Synchronize
'
'Attempt to use RemoveAccessRuleSpecific on the original rule.
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions
'
'        User: TestDomain\TestUser
'        Type: Allow
'      Rights: Modify, ReadPermissions, Synchronize
'
'Use RemoveAccessRuleSpecific with the correct rights.
'
'Current access rules:
'
'        User: TestDomain\TestUser
'        Type: Deny
'      Rights: ChangePermissions

備註

只有在規則完全符合 rule 所有詳細數據時,才會移除規則,包括旗標。 具有相同使用者且 AccessControlType 不會影響其他規則。

重要

規則代表 ACE) (一或多個基礎存取控制專案,當您修改使用者的存取安全性規則時,這些項目會視需要分割或合併。 因此,在新增規則時,規則可能已不存在於特定表單中,在此情況下, RemoveAccessRuleSpecific 方法無法移除它。

適用於