RegisteredWaitHandle.Unregister(WaitHandle) 方法

定義

命名空間:

System.Threading

組件:

System.Threading.ThreadPool.dll

來源:

RegisteredWaitHandle.Unix.cs

將 RegisterWaitForSingleObject(WaitHandle, WaitOrTimerCallback, Object, UInt32, Boolean) 方法所發出之已登錄等候作業取消。

public:
 bool Unregister(System::Threading::WaitHandle ^ waitObject);

public bool Unregister (System.Threading.WaitHandle? waitObject);

member this.Unregister : System.Threading.WaitHandle -> bool

Public Function Unregister (waitObject As WaitHandle) As Boolean

參數

waitObject

WaitHandle

要通知的 WaitHandle。

傳回

Boolean

如果函式成功，則為 true，否則為 false。

範例

下列範例示範如何在回呼發生時，使用 Unregister 方法來取消註冊工作，因為等候控制碼已發出訊號。

此範例也會示範如何在發出指定的等候控制碼時，使用 RegisterWaitForSingleObject 方法來執行指定的回呼方法。 在此範例中，回呼方法是 WaitProc ，而等候控制碼是 AutoResetEvent 。

此範例會定義類別 TaskInfo ，以保存在執行時傳遞至回呼的資訊。 此範例會 TaskInfo 建立 物件，並指派一些字串資料。 方法傳 RegisterWaitForSingleObject 回的 TaskInfo 會指派給 Handle 物件的欄位，讓回呼方法可以存取 RegisteredWaitHandle 。 RegisteredWaitHandle

除了指定要 TaskInfo 傳遞至回呼方法的物件之外，對 方法的呼叫 RegisterWaitForSingleObject 還會指定要 AutoResetEvent 等候的工作、代表 WaitProc 回呼方法的委派、 WaitOrTimerCallback 一秒逾時間隔和多個回呼。

當主執行緒藉由呼叫 其 Set 方法發出訊 AutoResetEvent 號時， WaitOrTimerCallback 會叫用委派。 方法 WaitProc 會測試 RegisteredWaitHandle 以判斷是否發生逾時。 如果因為已發出等候控制碼而叫用回呼，則方法會取消註冊 RegisteredWaitHandle ， WaitProc 停止其他回呼。 在逾時的情況下，工作會繼續等候。 方法會 WaitProc 以將訊息列印至主控台結束。

using namespace System;
using namespace System::Threading;

// TaskInfo contains data that will be passed to the callback
// method.
public ref class TaskInfo
{
public:
   TaskInfo()
   {
      Handle = nullptr;
      OtherInfo = "default";
   }

   RegisteredWaitHandle^ Handle;
   String^ OtherInfo;
};

ref class Example
{
public:

   // The callback method executes when the registered wait times out,
   // or when the WaitHandle (in this case AutoResetEvent) is signaled.
   // WaitProc unregisters the WaitHandle the first time the event is 
   // signaled.
   static void WaitProc( Object^ state, bool timedOut )
   {
      
      // The state Object must be cast to the correct type, because the
      // signature of the WaitOrTimerCallback delegate specifies type
      // Object.
      TaskInfo^ ti = static_cast<TaskInfo^>(state);
      String^ cause = "TIMED OUT";
      if (  !timedOut )
      {
         cause = "SIGNALED";
         
         // If the callback method executes because the WaitHandle is
         // signaled, stop future execution of the callback method
         // by unregistering the WaitHandle.
         if ( ti->Handle != nullptr )
                  ti->Handle->Unregister( nullptr );
      }

      Console::WriteLine( "WaitProc( {0}) executes on thread {1}; cause = {2}.", ti->OtherInfo, Thread::CurrentThread->GetHashCode(), cause );
   }

};

int main()
{
   
   // The main thread uses AutoResetEvent to signal the
   // registered wait handle, which executes the callback
   // method.
   AutoResetEvent^ ev = gcnew AutoResetEvent( false );
   TaskInfo^ ti = gcnew TaskInfo;
   ti->OtherInfo = "First task";
   
   // The TaskInfo for the task includes the registered wait
   // handle returned by RegisterWaitForSingleObject.  This
   // allows the wait to be terminated when the object has
   // been signaled once (see WaitProc).
   ti->Handle = ThreadPool::RegisterWaitForSingleObject( ev, gcnew WaitOrTimerCallback( Example::WaitProc ), ti, 1000, false );
   
   // The main thread waits three seconds, to demonstrate the
   // time-outs on the queued thread, and then signals.
   Thread::Sleep( 3100 );
   Console::WriteLine( "Main thread signals." );
   ev->Set();
   
   // The main thread sleeps, which should give the callback
   // method time to execute.  If you comment out this line, the
   // program usually ends before the ThreadPool thread can execute.
   Thread::Sleep( 1000 );
   
   // If you start a thread yourself, you can wait for it to end
   // by calling Thread::Join.  This option is not available with 
   // thread pool threads.
   return 0;
}

using System;
using System.Threading;

// TaskInfo contains data that will be passed to the callback
// method.
public class TaskInfo {
    public RegisteredWaitHandle Handle = null;
    public string OtherInfo = "default";
}

public class Example {
    public static void Main(string[] args) {
        // The main thread uses AutoResetEvent to signal the
        // registered wait handle, which executes the callback
        // method.
        AutoResetEvent ev = new AutoResetEvent(false);

        TaskInfo ti = new TaskInfo();
        ti.OtherInfo = "First task";
        // The TaskInfo for the task includes the registered wait
        // handle returned by RegisterWaitForSingleObject.  This
        // allows the wait to be terminated when the object has
        // been signaled once (see WaitProc).
        ti.Handle = ThreadPool.RegisterWaitForSingleObject(
            ev,
            new WaitOrTimerCallback(WaitProc),
            ti,
            1000,
            false
        );

        // The main thread waits three seconds, to demonstrate the
        // time-outs on the queued thread, and then signals.
        Thread.Sleep(3100);
        Console.WriteLine("Main thread signals.");
        ev.Set();

        // The main thread sleeps, which should give the callback
        // method time to execute.  If you comment out this line, the
        // program usually ends before the ThreadPool thread can execute.
        Thread.Sleep(1000);
        // If you start a thread yourself, you can wait for it to end
        // by calling Thread.Join.  This option is not available with 
        // thread pool threads.
    }
   
    // The callback method executes when the registered wait times out,
    // or when the WaitHandle (in this case AutoResetEvent) is signaled.
    // WaitProc unregisters the WaitHandle the first time the event is 
    // signaled.
    public static void WaitProc(object state, bool timedOut) {
        // The state object must be cast to the correct type, because the
        // signature of the WaitOrTimerCallback delegate specifies type
        // Object.
        TaskInfo ti = (TaskInfo) state;

        string cause = "TIMED OUT";
        if (!timedOut) {
            cause = "SIGNALED";
            // If the callback method executes because the WaitHandle is
            // signaled, stop future execution of the callback method
            // by unregistering the WaitHandle.
            if (ti.Handle != null)
                ti.Handle.Unregister(null);
        } 

        Console.WriteLine("WaitProc( {0} ) executes on thread {1}; cause = {2}.",
            ti.OtherInfo, 
            Thread.CurrentThread.GetHashCode().ToString(), 
            cause
        );
    }
}

Imports System.Threading

' TaskInfo contains data that will be passed to the callback
' method.
Public Class TaskInfo
    public Handle As RegisteredWaitHandle = Nothing
    public OtherInfo As String = "default"
End Class

Public Class Example

    <MTAThread> _
    Public Shared Sub Main()
        ' The main thread uses AutoResetEvent to signal the
        ' registered wait handle, which executes the callback
        ' method.
        Dim ev As New AutoResetEvent(false)

        Dim ti As New TaskInfo()
        ti.OtherInfo = "First task"
        ' The TaskInfo for the task includes the registered wait
        ' handle returned by RegisterWaitForSingleObject.  This
        ' allows the wait to be terminated when the object has
        ' been signaled once (see WaitProc).
        ti.Handle = ThreadPool.RegisterWaitForSingleObject( _
            ev, _
            New WaitOrTimerCallback(AddressOf WaitProc), _
            ti, _
            1000, _
            false _
        )

        ' The main thread waits about three seconds, to demonstrate 
        ' the time-outs on the queued task, and then signals.
        Thread.Sleep(3100)
        Console.WriteLine("Main thread signals.")
        ev.Set()

        ' The main thread sleeps, which should give the callback
        ' method time to execute.  If you comment out this line, the
        ' program usually ends before the ThreadPool thread can execute.
        Thread.Sleep(1000)
        ' If you start a thread yourself, you can wait for it to end
        ' by calling Thread.Join.  This option is not available with 
        ' thread pool threads.
    End Sub
   
    ' The callback method executes when the registered wait times out,
    ' or when the WaitHandle (in this case AutoResetEvent) is signaled.
    ' WaitProc unregisters the WaitHandle the first time the event is 
    ' signaled.
    Public Shared Sub WaitProc(state As Object, timedOut As Boolean)
        ' The state object must be cast to the correct type, because the
        ' signature of the WaitOrTimerCallback delegate specifies type
        ' Object.
        Dim ti As TaskInfo = CType(state, TaskInfo)

        Dim cause As String = "TIMED OUT"
        If Not timedOut Then
            cause = "SIGNALED"
            ' If the callback method executes because the WaitHandle is
            ' signaled, stop future execution of the callback method
            ' by unregistering the WaitHandle.
            If Not ti.Handle Is Nothing Then
                ti.Handle.Unregister(Nothing)
            End If
        End If 

        Console.WriteLine("WaitProc( {0} ) executes on thread {1}; cause = {2}.", _
            ti.OtherInfo, _
            Thread.CurrentThread.GetHashCode().ToString(), _
            cause _
        )
    End Sub
End Class

備註

如果 waitObject 已指定，則只有在 成功取消註冊 時 RegisteredWaitHandle 才會發出訊號。 如果回呼方法在執行時 Unregister 正在進行中， waitObject 則在回呼方法完成之前不會發出訊號。 特別是，如果回呼方法執行 Unregister 時 waitObject ，除非該回呼方法完成，否則不會發出訊號。

另請參閱

• 受控執行緒集區