共用方式為


SpotLight.InnerConeAngle 屬性

定義

取得或設定角度,這個角度指定 SpotLight 的圓錐形投射比例,場景中位於這個比例內的物件會被燈光的完整強度照到。

public:
 property double InnerConeAngle { double get(); void set(double value); };
public double InnerConeAngle { get; set; }
member this.InnerConeAngle : double with get, set
Public Property InnerConeAngle As Double

屬性值

角度 (以度數為單位),指定 SpotLight 的圓錐形投射比例,場景中位於這個比例內的物件會被燈光的完整強度照到。 預設值是 180

範例

下列範例示範如何在 3D 場景中建立 SpotLight

<!-- A SpotLight is used to light the scene. The InnerConeAngle and OuterConeAngle are used
     to control the size of the light cone created by the SpotLight. The Direction and Position
     properties determine where the SpotLight is pointing in the scene. In this example, the Position
     of the SpotLight is set so that the SpotLight is only illuminating the upper right-hand corner
     of the 3D object. -->
<ModelVisual3D>
  <ModelVisual3D.Content>
    <SpotLight x:Name="mySpotLight" InnerConeAngle="20" OuterConeAngle="20" Color="#FFFFFF" Direction="0,0,-1" 
      Position="1,1,6" Range="20"/>
  </ModelVisual3D.Content>
</ModelVisual3D>

下列程式碼顯示整個範例。

<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" >
  <DockPanel>
    <Viewbox>
      <Canvas Width="321" Height="201">

        <!-- The Viewport3D provides a rendering surface for 3-D visual content. -->
        <Viewport3D ClipToBounds="True" Width="150" Height="150" Canvas.Left="0" Canvas.Top="10">

          <!-- Defines the camera used to view the 3D object. -->
          <Viewport3D.Camera>
            <PerspectiveCamera Position="0,0,2" LookDirection="0,0,-1" FieldOfView="60" />
          </Viewport3D.Camera>

          <!-- The ModelVisual3D children contain the 3D models -->
          <Viewport3D.Children>
            <!-- A SpotLight is used to light the scene. The InnerConeAngle and OuterConeAngle are used
                 to control the size of the light cone created by the SpotLight. The Direction and Position
                 properties determine where the SpotLight is pointing in the scene. In this example, the Position
                 of the SpotLight is set so that the SpotLight is only illuminating the upper right-hand corner
                 of the 3D object. -->
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <SpotLight x:Name="mySpotLight" InnerConeAngle="20" OuterConeAngle="20" Color="#FFFFFF" Direction="0,0,-1" 
                  Position="1,1,6" Range="20"/>
              </ModelVisual3D.Content>
            </ModelVisual3D>
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <GeometryModel3D>

                  <!-- The geometry specifies the shape of the 3D plane. In this sample, a flat sheet is created. -->
                  <GeometryModel3D.Geometry>
                    <MeshGeometry3D
                     TriangleIndices="0,1,2 3,4,5 "
                     Normals="0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 "
                     TextureCoordinates="0,0 1,0 1,1 1,1 0,1 0,0 "
                     Positions="-0.5,-0.5,0.5 0.5,-0.5,0.5 0.5,0.5,0.5 0.5,0.5,0.5 -0.5,0.5,0.5 -0.5,-0.5,0.5 " />
                  </GeometryModel3D.Geometry>

                  <!-- The material specifies the material applied to the 3D object. In this sample a linear gradient 
                       covers the surface of the 3D object.-->
                  <GeometryModel3D.Material>
                    <MaterialGroup>
                      <DiffuseMaterial>
                        <DiffuseMaterial.Brush>
                          <LinearGradientBrush StartPoint="0,0.5" EndPoint="1,0.5">
                            <LinearGradientBrush.GradientStops>
                              <GradientStop Color="Yellow" Offset="0" />
                              <GradientStop Color="Red" Offset="0.25" />
                              <GradientStop Color="Blue" Offset="0.75" />
                              <GradientStop Color="LimeGreen" Offset="1" />
                            </LinearGradientBrush.GradientStops>
                          </LinearGradientBrush>
                        </DiffuseMaterial.Brush>
                      </DiffuseMaterial>
                    </MaterialGroup>
                  </GeometryModel3D.Material>
                </GeometryModel3D>
              </ModelVisual3D.Content>
            </ModelVisual3D>
          </Viewport3D.Children>

        </Viewport3D>
      </Canvas>
    </Viewbox>
  </DockPanel>
</Page>

備註

光線的 SpotLight 濃度會從完全照明減少到在 和 OuterConeAngle 之間的 InnerConeAngle 光線投影角度中,從完全照明減少為無。

焦點圖表焦點圖表

相依性屬性資訊

識別碼欄位 InnerConeAngleProperty
設定為 的中繼資料屬性 true

適用於