Comparteix a través de


DeflateStream.Write Método

Definición

Sobrecargas

Write(ReadOnlySpan<Byte>)

Escribe una secuencia de bytes en la secuencia Deflate actual y avanza la posición actual en esta secuencia Deflate según el número de bytes escritos.

Write(Byte[], Int32, Int32)

Escribe los bytes comprimidos en la secuencia subyacente de la matriz de bytes especificada.

Write(ReadOnlySpan<Byte>)

Source:
DeflateStream.cs
Source:
DeflateStream.cs
Source:
DeflateStream.cs

Escribe una secuencia de bytes en la secuencia Deflate actual y avanza la posición actual en esta secuencia Deflate según el número de bytes escritos.

public:
 override void Write(ReadOnlySpan<System::Byte> buffer);
public override void Write (ReadOnlySpan<byte> buffer);
override this.Write : ReadOnlySpan<byte> -> unit
Public Overrides Sub Write (buffer As ReadOnlySpan(Of Byte))

Parámetros

buffer
ReadOnlySpan<Byte>

Región de memoria. Este método copia el contenido de esta región en la secuencia Deflate actual.

Comentarios

Utilice la CanWrite propiedad para determinar si la instancia actual admite la escritura. Use el WriteAsync método para escribir de forma asincrónica en la secuencia actual.

Si la operación de escritura se realiza correctamente, la posición dentro de la secuencia Deflate avanza por el número de bytes escritos. Si se produce una excepción, la posición dentro de la secuencia Deflate permanece sin cambios.

Se aplica a

Write(Byte[], Int32, Int32)

Source:
DeflateStream.cs
Source:
DeflateStream.cs
Source:
DeflateStream.cs

Escribe los bytes comprimidos en la secuencia subyacente de la matriz de bytes especificada.

public:
 override void Write(cli::array <System::Byte> ^ array, int offset, int count);
public:
 override void Write(cli::array <System::Byte> ^ buffer, int offset, int count);
public override void Write (byte[] array, int offset, int count);
public override void Write (byte[] buffer, int offset, int count);
override this.Write : byte[] * int * int -> unit
override this.Write : byte[] * int * int -> unit
Public Overrides Sub Write (array As Byte(), offset As Integer, count As Integer)
Public Overrides Sub Write (buffer As Byte(), offset As Integer, count As Integer)

Parámetros

arraybuffer
Byte[]

Búfer que contiene los datos que se van a comprimir.

offset
Int32

Desplazamiento de bytes desde el que se leerán los bytes.

count
Int32

Número máximo de bytes que se pueden escribir.

Comentarios

En el ejemplo siguiente se muestra cómo comprimir y descomprimir bytes mediante los Read métodos y Write .

using System;
using System.IO;
using System.IO.Compression;
using System.Text;

public static class MemoryWriteReadExample
{
    private const string Message = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.";
    private static readonly byte[] s_messageBytes = Encoding.ASCII.GetBytes(Message);

    public static void Run()
    {
        Console.WriteLine($"The original string length is {s_messageBytes.Length} bytes.");
        using var stream = new MemoryStream();
        CompressBytesToStream(stream);
        Console.WriteLine($"The compressed stream length is {stream.Length} bytes.");
        int decompressedLength = DecompressStreamToBytes(stream);
        Console.WriteLine($"The decompressed string length is {decompressedLength} bytes, same as the original length.");
        /*
         Output:
            The original string length is 445 bytes.
            The compressed stream length is 265 bytes.
            The decompressed string length is 445 bytes, same as the original length.
        */
    }

    private static void CompressBytesToStream(Stream stream)
    {
        using var compressor = new DeflateStream(stream, CompressionMode.Compress, leaveOpen: true);
        compressor.Write(s_messageBytes, 0, s_messageBytes.Length);
    }

    private static int DecompressStreamToBytes(Stream stream)
    {
        stream.Position = 0;
        int bufferSize = 512;
        byte[] buffer = new byte[bufferSize];
        using var deflateStream = new DeflateStream(stream, CompressionMode.Decompress);

        int totalRead = 0;
        while (totalRead < buffer.Length)
        {
            int bytesRead = deflateStream.Read(buffer.AsSpan(totalRead));
            if (bytesRead == 0) break;
            totalRead += bytesRead;
        }

        return totalRead;
    }
}
module MemoryWriteReadExample

open System.IO
open System.IO.Compression
open System.Text

let message =
    "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum."

let s_messageBytes = Encoding.ASCII.GetBytes message

let compressBytesToStream stream =
    use compressor = new DeflateStream(stream, CompressionMode.Compress, true)
    compressor.Write(s_messageBytes, 0, s_messageBytes.Length)

let decompressStreamToBytes (stream: Stream) =
    stream.Position <- 0
    let bufferSize = 512
    let decompressedBytes = Array.zeroCreate bufferSize
    use decompressor = new DeflateStream(stream, CompressionMode.Decompress)
    decompressor.Read(decompressedBytes, 0, bufferSize)

[<EntryPoint>]
let main _ =
    printfn $"The original string length is {s_messageBytes.Length} bytes."
    use stream = new MemoryStream()
    compressBytesToStream stream
    printfn $"The compressed stream length is {stream.Length} bytes."
    let decompressedLength = decompressStreamToBytes stream
    printfn $"The decompressed string length is {decompressedLength} bytes, same as the original length."
    0

// Output:
//     The original string length is 445 bytes.
//     The compressed stream length is 265 bytes.
//     The decompressed string length is 445 bytes, same as the original length.
Imports System.IO
Imports System.IO.Compression
Imports System.Text

Module MemoryWriteReadExample
    Private Const Message As String = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum."
    Private ReadOnly s_messageBytes As Byte() = Encoding.ASCII.GetBytes(Message)

    Sub Main()
        Console.WriteLine($"The original string length is {s_messageBytes.Length} bytes.")

        Using stream = New MemoryStream()
            CompressBytesToStream(stream)
            Console.WriteLine($"The compressed stream length is {stream.Length} bytes.")
            Dim decompressedLength As Integer = DecompressStreamToBytes(stream)
            Console.WriteLine($"The decompressed string length is {decompressedLength} bytes, same as the original length.")
        End Using
        ' Output:
        '   The original string length is 445 bytes.
        '   The compressed stream length is 265 bytes.
        '   The decompressed string length is 445 bytes, same as the original length.
    End Sub

    Private Sub CompressBytesToStream(ByVal stream As Stream)
        Using compressor = New DeflateStream(stream, CompressionMode.Compress, leaveOpen:=True)
            compressor.Write(s_messageBytes, 0, s_messageBytes.Length)
        End Using
    End Sub

    Private Function DecompressStreamToBytes(ByVal stream As Stream) As Integer
        stream.Position = 0
        Dim bufferSize As Integer = 512
        Dim decompressedBytes As Byte() = New Byte(bufferSize - 1) {}
        Using decompressor = New DeflateStream(stream, CompressionMode.Decompress)
            Dim length As Integer = decompressor.Read(decompressedBytes, 0, bufferSize)
            Return length
        End Using
    End Function
End Module

Se aplica a