Console.OpenStandardOutput Metoda

Reference

Definice

Obor názvů:: System

Sestavení:: System.Console.dll

Sestavení:: netstandard.dll

Sestavení:: mscorlib.dll

Důležité

Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.

Získá standardní výstupní datový proud.

Přetížení

OpenStandardOutput()	Získá standardní výstupní datový proud.
OpenStandardOutput(Int32)	Získá standardní výstupní datový proud, který je nastaven na zadanou velikost vyrovnávací paměti.

OpenStandardOutput()

Získá standardní výstupní datový proud.

public:
 static System::IO::Stream ^ OpenStandardOutput();

public static System.IO.Stream OpenStandardOutput ();

static member OpenStandardOutput : unit -> System.IO.Stream

Public Shared Function OpenStandardOutput () As Stream

Návraty

Stream

Standardní výstupní datový proud.

Příklady

Následující příklad ukazuje použití OpenStandardOutput metody. Nahrazuje čtyři po sobě jdoucí znaky mezery v řetězci znakem tabulátoru. Pokud ho chcete spustit, musíte uvést dva argumenty příkazového řádku. První je název existujícího textového souboru, do kterého se má přesměrovat standardní vstupní proud. Druhým je název souboru, do kterého má být přesměrován standardní výstupní datový proud. Tento soubor nemusí existovat. Je-li tomu tak, její obsah bude přepsán.

using namespace System;
using namespace System::IO;

int main()
{
   array<String^>^args = Environment::GetCommandLineArgs();
   const int tabSize = 4;
   String^ usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt";
   StreamWriter^ writer = nullptr;
   if ( args->Length < 3 )
   {
      Console::WriteLine( usageText );
      return 1;
   }

   try
   {
      // Attempt to open output file.
      writer = gcnew StreamWriter( args[ 2 ] );
      // Redirect standard output from the console to the output file.
      Console::SetOut( writer );
      // Redirect standard input from the console to the input file.
      Console::SetIn( gcnew StreamReader( args[ 1 ] ) );
   }
   catch ( IOException^ e ) 
   {
      TextWriter^ errorWriter = Console::Error;
      errorWriter->WriteLine( e->Message );
      errorWriter->WriteLine( usageText );
      return 1;
   }

   String^ line;
   while ( (line = Console::ReadLine()) != nullptr )
   {
      String^ newLine = line->Replace( ((String^)"")->PadRight( tabSize, ' ' ), "\t" );
      Console::WriteLine( newLine );
   }

   writer->Close();
   
   // Recover the standard output stream so that a 
   // completion message can be displayed.
   StreamWriter^ standardOutput = gcnew StreamWriter( Console::OpenStandardOutput() );
   standardOutput->AutoFlush = true;
   Console::SetOut( standardOutput );
   Console::WriteLine( "INSERTTABS has completed the processing of {0}.", args[ 1 ] );
   return 0;
}

using System;
using System.IO;

public class InsertTabs
{
    private const int tabSize = 4;
    private const string usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt";
    public static int Main(string[] args)
    {
        if (args.Length < 2)
        {
            Console.WriteLine(usageText);
            return 1;
        }

        try
        {
            // Attempt to open output file.
            using (var writer = new StreamWriter(args[1]))
            {
                using (var reader = new StreamReader(args[0]))
                {
                    // Redirect standard output from the console to the output file.
                    Console.SetOut(writer);
                    // Redirect standard input from the console to the input file.
                    Console.SetIn(reader);
                    string line;
                    while ((line = Console.ReadLine()) != null)
                    {
                        string newLine = line.Replace(("").PadRight(tabSize, ' '), "\t");
                        Console.WriteLine(newLine);
                    }
                }
            }
        }
        catch(IOException e)
        {
            TextWriter errorWriter = Console.Error;
            errorWriter.WriteLine(e.Message);
            errorWriter.WriteLine(usageText);
            return 1;
        }

        // Recover the standard output stream so that a
        // completion message can be displayed.
        var standardOutput = new StreamWriter(Console.OpenStandardOutput());
        standardOutput.AutoFlush = true;
        Console.SetOut(standardOutput);
        Console.WriteLine($"INSERTTABS has completed the processing of {args[0]}.");
        return 0;
    }
}

open System
open System.IO

let tabSize = 4
let usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt"

[<EntryPoint>]
let main args =
    if args.Length < 2 then
        Console.WriteLine usageText
        1
    else
        try
            // Attempt to open output file.
            use reader = new StreamReader(args[0])
            use writer = new StreamWriter(args[1])
            
            // Redirect standard output from the console to the output file.
            Console.SetOut writer
            
            // Redirect standard input from the console to the input file.
            Console.SetIn reader
            
            let mutable line = Console.ReadLine()
            while line <> null do
                let newLine = line.Replace(("").PadRight(tabSize, ' '), "\t")
                Console.WriteLine newLine
                line <- Console.ReadLine()

            // Recover the standard output stream so that a
            // completion message can be displayed.
            let standardOutput = new StreamWriter(Console.OpenStandardOutput())
            standardOutput.AutoFlush <- true
            Console.SetOut standardOutput
            Console.WriteLine $"INSERTTABS has completed the processing of {args[0]}."
            0

        with :? IOException as e -> 
            let errorWriter = Console.Error
            errorWriter.WriteLine e.Message
            errorWriter.WriteLine usageText
            1

Imports System.IO

Public Module InsertTabs
    Private Const tabSize As Integer = 4
    Private Const usageText As String = "Usage: INSERTTABS inputfile.txt outputfile.txt"
   
    Public Function Main(args As String()) As Integer
        If args.Length < 2 Then
            Console.WriteLine(usageText)
            Return 1
        End If
      
        Try
            ' Attempt to open output file.
            Using writer As New StreamWriter(args(1))
                Using reader As New StreamReader(args(0))
                    ' Redirect standard output from the console to the output file.
                    Console.SetOut(writer)
                    ' Redirect standard input from the console to the input file.
                    Console.SetIn(reader)
                    Dim line As String = Console.ReadLine()
                    While line IsNot Nothing
                        Dim newLine As String = line.Replace("".PadRight(tabSize, " "c), ControlChars.Tab)
                        Console.WriteLine(newLine)
                        line = Console.ReadLine()
                    End While
                End Using
            End Using
        Catch e As IOException
            Dim errorWriter As TextWriter = Console.Error
            errorWriter.WriteLine(e.Message)
            errorWriter.WriteLine(usageText)
            Return 1
        End Try

        ' Recover the standard output stream so that a 
        ' completion message can be displayed.
        Dim standardOutput As New StreamWriter(Console.OpenStandardOutput())
        standardOutput.AutoFlush = True
        Console.SetOut(standardOutput)
        Console.WriteLine($"INSERTTABS has completed the processing of {args(0)}.")
        Return 0
    End Function 
End Module

Poznámky

Tuto metodu lze použít k získání standardního výstupního datového proudu poté, co byl změněn SetOut metodou.

Viz také

Platí pro

OpenStandardOutput(Int32)

Získá standardní výstupní datový proud, který je nastaven na zadanou velikost vyrovnávací paměti.

public:
 static System::IO::Stream ^ OpenStandardOutput(int bufferSize);

public static System.IO.Stream OpenStandardOutput (int bufferSize);

static member OpenStandardOutput : int -> System.IO.Stream

Public Shared Function OpenStandardOutput (bufferSize As Integer) As Stream

Parametry

bufferSize: Int32

Tento parametr nemá žádný vliv, ale jeho hodnota musí být větší než nebo rovna nule.

Návraty

Stream

Standardní výstupní datový proud.

Výjimky

ArgumentOutOfRangeException

bufferSize je menší nebo rovno nule.

Příklady

using namespace System;
using namespace System::IO;

int main()
{
   array<String^>^args = Environment::GetCommandLineArgs();
   const int tabSize = 4;
   String^ usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt";
   StreamWriter^ writer = nullptr;
   if ( args->Length < 3 )
   {
      Console::WriteLine( usageText );
      return 1;
   }

   try
   {
      // Attempt to open output file.
      writer = gcnew StreamWriter( args[ 2 ] );
      // Redirect standard output from the console to the output file.
      Console::SetOut( writer );
      // Redirect standard input from the console to the input file.
      Console::SetIn( gcnew StreamReader( args[ 1 ] ) );
   }
   catch ( IOException^ e ) 
   {
      TextWriter^ errorWriter = Console::Error;
      errorWriter->WriteLine( e->Message );
      errorWriter->WriteLine( usageText );
      return 1;
   }

   String^ line;
   while ( (line = Console::ReadLine()) != nullptr )
   {
      String^ newLine = line->Replace( ((String^)"")->PadRight( tabSize, ' ' ), "\t" );
      Console::WriteLine( newLine );
   }

   writer->Close();
   
   // Recover the standard output stream so that a 
   // completion message can be displayed.
   StreamWriter^ standardOutput = gcnew StreamWriter( Console::OpenStandardOutput() );
   standardOutput->AutoFlush = true;
   Console::SetOut( standardOutput );
   Console::WriteLine( "INSERTTABS has completed the processing of {0}.", args[ 1 ] );
   return 0;
}

using System;
using System.IO;

public class InsertTabs
{
    private const int tabSize = 4;
    private const string usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt";
    public static int Main(string[] args)
    {
        if (args.Length < 2)
        {
            Console.WriteLine(usageText);
            return 1;
        }

        try
        {
            // Attempt to open output file.
            using (var writer = new StreamWriter(args[1]))
            {
                using (var reader = new StreamReader(args[0]))
                {
                    // Redirect standard output from the console to the output file.
                    Console.SetOut(writer);
                    // Redirect standard input from the console to the input file.
                    Console.SetIn(reader);
                    string line;
                    while ((line = Console.ReadLine()) != null)
                    {
                        string newLine = line.Replace(("").PadRight(tabSize, ' '), "\t");
                        Console.WriteLine(newLine);
                    }
                }
            }
        }
        catch(IOException e)
        {
            TextWriter errorWriter = Console.Error;
            errorWriter.WriteLine(e.Message);
            errorWriter.WriteLine(usageText);
            return 1;
        }

        // Recover the standard output stream so that a
        // completion message can be displayed.
        var standardOutput = new StreamWriter(Console.OpenStandardOutput());
        standardOutput.AutoFlush = true;
        Console.SetOut(standardOutput);
        Console.WriteLine($"INSERTTABS has completed the processing of {args[0]}.");
        return 0;
    }
}

open System
open System.IO

let tabSize = 4
let usageText = "Usage: INSERTTABS inputfile.txt outputfile.txt"

[<EntryPoint>]
let main args =
    if args.Length < 2 then
        Console.WriteLine usageText
        1
    else
        try
            // Attempt to open output file.
            use reader = new StreamReader(args[0])
            use writer = new StreamWriter(args[1])
            
            // Redirect standard output from the console to the output file.
            Console.SetOut writer
            
            // Redirect standard input from the console to the input file.
            Console.SetIn reader
            
            let mutable line = Console.ReadLine()
            while line <> null do
                let newLine = line.Replace(("").PadRight(tabSize, ' '), "\t")
                Console.WriteLine newLine
                line <- Console.ReadLine()

            // Recover the standard output stream so that a
            // completion message can be displayed.
            let standardOutput = new StreamWriter(Console.OpenStandardOutput())
            standardOutput.AutoFlush <- true
            Console.SetOut standardOutput
            Console.WriteLine $"INSERTTABS has completed the processing of {args[0]}."
            0

        with :? IOException as e -> 
            let errorWriter = Console.Error
            errorWriter.WriteLine e.Message
            errorWriter.WriteLine usageText
            1

Imports System.IO

Public Module InsertTabs
    Private Const tabSize As Integer = 4
    Private Const usageText As String = "Usage: INSERTTABS inputfile.txt outputfile.txt"
   
    Public Function Main(args As String()) As Integer
        If args.Length < 2 Then
            Console.WriteLine(usageText)
            Return 1
        End If
      
        Try
            ' Attempt to open output file.
            Using writer As New StreamWriter(args(1))
                Using reader As New StreamReader(args(0))
                    ' Redirect standard output from the console to the output file.
                    Console.SetOut(writer)
                    ' Redirect standard input from the console to the input file.
                    Console.SetIn(reader)
                    Dim line As String = Console.ReadLine()
                    While line IsNot Nothing
                        Dim newLine As String = line.Replace("".PadRight(tabSize, " "c), ControlChars.Tab)
                        Console.WriteLine(newLine)
                        line = Console.ReadLine()
                    End While
                End Using
            End Using
        Catch e As IOException
            Dim errorWriter As TextWriter = Console.Error
            errorWriter.WriteLine(e.Message)
            errorWriter.WriteLine(usageText)
            Return 1
        End Try

        ' Recover the standard output stream so that a 
        ' completion message can be displayed.
        Dim standardOutput As New StreamWriter(Console.OpenStandardOutput())
        standardOutput.AutoFlush = True
        Console.SetOut(standardOutput)
        Console.WriteLine($"INSERTTABS has completed the processing of {args(0)}.")
        Return 0
    End Function 
End Module

Poznámky

Tuto metodu lze použít k získání standardního výstupního datového proudu poté, co byl změněn SetOut metodou.

Viz také

Platí pro

Sdílet prostřednictvím

Console.OpenStandardOutput Metoda

Definice

Přetížení

OpenStandardOutput()

Návraty

Příklady

Poznámky

Viz také

Platí pro

OpenStandardOutput(Int32)

Parametry

Návraty

Výjimky

Příklady

Poznámky

Viz také

Platí pro

Další materiály