CounterSample Konstruktory
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Inicializuje novou instanci CounterSample struktury.
Přetížení
| CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType) |
Inicializuje novou instanci CounterSample struktury a nastaví CounterTimeStamp vlastnost na 0 (nula). |
| CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64) |
Inicializuje novou instanci CounterSample struktury a nastaví CounterTimeStamp vlastnost na hodnotu, která je předána. |
CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)
- Zdroj:
- CounterSample.cs
- Zdroj:
- CounterSample.cs
- Zdroj:
- CounterSample.cs
Inicializuje novou instanci CounterSample struktury a nastaví CounterTimeStamp vlastnost na 0 (nula).
public:
CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType);public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType);new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType -> System.Diagnostics.CounterSamplePublic Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType)Parametry
- rawValue
- Int64
Číselná hodnota přidružená k ukázce čítače výkonu.
- baseValue
- Int64
Volitelná základní nezpracovaná hodnota čítače, která se použije pouze v případě, že je ukázka založená na více čítačích.
- counterFrequency
- Int64
Frekvence čtení čítače
- systemFrequency
- Int64
Frekvence, s jakou systém čte z čítače.
- timeStamp
- Int64
Nezpracované časové razítko.
- timeStamp100nSec
- Int64
Nezpracované časové razítko s vysokou věrností.
- counterType
- PerformanceCounterType
Objekt PerformanceCounterType , který označuje typ čítače, pro který je tato ukázka snímek.
Poznámky
Pomocí tohoto konstruktoru můžete odebrat počáteční vzorek čítače výkonu. Sledování systému poskytuje hodnoty pro tyto parametry automaticky při prvním volání NextSample metody.
Platí pro
CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)
- Zdroj:
- CounterSample.cs
- Zdroj:
- CounterSample.cs
- Zdroj:
- CounterSample.cs
Inicializuje novou instanci CounterSample struktury a nastaví CounterTimeStamp vlastnost na hodnotu, která je předána.
public:
CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType, long counterTimeStamp);public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType, long counterTimeStamp);new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType * int64 -> System.Diagnostics.CounterSamplePublic Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType, counterTimeStamp As Long)Parametry
- rawValue
- Int64
Číselná hodnota přidružená k ukázce čítače výkonu.
- baseValue
- Int64
Volitelná základní nezpracovaná hodnota čítače, která se použije pouze v případě, že je ukázka založená na více čítačích.
- counterFrequency
- Int64
Frekvence čtení čítače
- systemFrequency
- Int64
Frekvence, s jakou systém čte z čítače.
- timeStamp
- Int64
Nezpracované časové razítko.
- timeStamp100nSec
- Int64
Nezpracované časové razítko s vysokou věrností.
- counterType
- PerformanceCounterType
Objekt PerformanceCounterType , který označuje typ čítače, pro který je tato ukázka snímek.
- counterTimeStamp
- Int64
Čas, kdy byl vzorek odebrán.
Příklady
Následující příklad ukazuje, jak inicializovat novou CounterSample strukturu a předat hodnoty pro rawValueparametry , baseValue, counterFrequency, systemFrequency, timeStamp, timeStamp100nSec, counterTypea counterTimeStamp . Po vytvoření CounterSample struktury se v příkladu zobrazí hodnoty vlastností pro objekt CounterSample v okně konzoly.
PerformanceCounter^ myPerformanceCounter1 = gcnew PerformanceCounter(
"Processor","% Processor Time","0" );
CounterSample myCounterSample1( 10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType::AverageCount64 );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample1.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
PerformanceCounter myPerformanceCounter1 = new PerformanceCounter
("Processor","% Processor Time", "0");
CounterSample myCounterSample1 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType.AverageCount64);
Console.WriteLine("CounterTimeStamp = "+myCounterSample1.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
Dim myPerformanceCounter1 As New PerformanceCounter("Processor", _
"% Processor Time", "0")
Dim myCounterSample1 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
PerformanceCounterType.AverageCount64)
Console.WriteLine("CounterTimeStamp = " & myCounterSample1.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
' Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
PerformanceCounter^ myPerformanceCounter2 =
gcnew PerformanceCounter( "Processor","% Processor Time","0" );
CounterSample myCounterSample2( 10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType::AverageCount64,300);
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
PerformanceCounter myPerformanceCounter2 = new PerformanceCounter
("Processor","% Processor Time", "0");
CounterSample myCounterSample2 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType.AverageCount64, 300);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Dim myPerformanceCounter2 As New PerformanceCounter("Processor", _
"% Processor Time", "0")
Dim myCounterSample2 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
PerformanceCounterType.AverageCount64, 300)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
' Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
Poznámky
Pomocí tohoto konstruktoru můžete odebrat vzorky poté, co jste již odebrali počáteční vzorek čítače výkonu. Sledování systému poskytuje hodnoty pro tyto parametry automaticky při volání NextSample metody.
Platí pro
Spolupracujte s námi na GitHubu
Zdroj tohoto obsahu najdete na GitHubu, kde můžete také vytvářet a kontrolovat problémy a žádosti o přijetí změn. Další informace najdete v našem průvodci pro přispěvatele.
Váš názor
Připravujeme: V průběhu roku 2024 budeme postupně vyřazovat problémy z GitHub coby mechanismus zpětné vazby pro obsah a nahrazovat ho novým systémem zpětné vazby. Další informace naleznete v tématu: https://aka.ms/ContentUserFeedback.
Odeslat a zobrazit názory pro