GraphicsPathIterator.NextMarker Metoda
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Přesune iterátor na další značku v cestě.
Přetížení
NextMarker(GraphicsPath) |
K tomuto GraphicsPathIterator objektu je GraphicsPath přidružený objekt. Metoda NextMarker(GraphicsPath) zvýší přidružený GraphicsPath k další značce v cestě a zkopíruje všechny body obsažené mezi aktuální značkou a další značkou (nebo koncem cesty) na druhý GraphicsPath objekt předaný parametru . |
NextMarker(Int32, Int32) |
Zvýší GraphicsPathIterator hodnotu na další značku v cestě a vrátí indexy start a stop prostřednictvím parametrů [out]. |
NextMarker(GraphicsPath)
- Zdroj:
- GraphicsPathIterator.cs
- Zdroj:
- GraphicsPathIterator.cs
- Zdroj:
- GraphicsPathIterator.cs
K tomuto GraphicsPathIterator objektu je GraphicsPath přidružený objekt. Metoda NextMarker(GraphicsPath) zvýší přidružený GraphicsPath k další značce v cestě a zkopíruje všechny body obsažené mezi aktuální značkou a další značkou (nebo koncem cesty) na druhý GraphicsPath objekt předaný parametru .
public:
int NextMarker(System::Drawing::Drawing2D::GraphicsPath ^ path);
public int NextMarker (System.Drawing.Drawing2D.GraphicsPath path);
member this.NextMarker : System.Drawing.Drawing2D.GraphicsPath -> int
Public Function NextMarker (path As GraphicsPath) As Integer
Parametry
- path
- GraphicsPath
Objekt GraphicsPath , do kterého budou zkopírovány body.
Návraty
Počet bodů mezi touto a další značkou.
Příklady
Následující příklad je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
OnPaint objekt události . Kód provede následující akce:
Vytvoří GraphicsPath objekt.
Přidá tři čáry, obdélník, tři tečky a dvě značky.
Seznamy hodnoty všech bodů cesty na levou stranu obrazovky.
Vytvoří GraphicsPathIterator objekt.
Vytvoří objekt ,
myPathSection
který GraphicsPath bude přijímat zkopírované body.Zavolá metodu NextMarker , která iteruje na první značku a zkopíruje všechny body obsažené mezi danou značkou a vedle
myPathSection
.Vrátí počet bodů zkopírovaných do
markerPoints
.Seznamy číslo značky (první značka) a počet bodů, které obsahuje, na pravé straně obrazovky.
public:
void NextMarkerExample2( PaintEventArgs^ e )
{
// Create a graphics path.
GraphicsPath^ myPath = gcnew GraphicsPath;
// Set up primitives to add to myPath.
array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
Rectangle myRect = Rectangle(120,120,100,100);
// Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath->AddLines( myPoints );
myPath->SetMarkers();
myPath->AddRectangle( myRect );
myPath->SetMarkers();
myPath->AddEllipse( 220, 220, 100, 100 );
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath->PointCount;
array<PointF>^myPathPoints = myPath->PathPoints;
array<Byte>^myPathTypes = myPath->PathTypes;
// Set up variables for listing all the values of the path's
// points to the screen.
int i;
float j = 20;
System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
// List the values for all of path points and types to
// the left side of the screen.
for ( i = 0; i < myPathPointCount; i++ )
{
e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
j += 20;
}
// Create a GraphicsPathIterator.
GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
// Rewind the iterator.
myPathIterator->Rewind();
// Create a GraphicsPath to receive a section of myPath.
GraphicsPath^ myPathSection = gcnew GraphicsPath;
// Retrieve and list the number of points contained in
// the first marker to the right side of the screen.
int markerPoints;
markerPoints = myPathIterator->NextMarker( myPathSection );
e->Graphics->DrawString( String::Format( "Marker: 1 Num Points: {0}", markerPoints ), myFont, myBrush, 200, 20 );
}
public void NextMarkerExample2(PaintEventArgs e)
{
// Create a graphics path.
GraphicsPath myPath = new GraphicsPath();
// Set up primitives to add to myPath.
Point[] myPoints = {new Point(20, 20), new Point(120, 120),
new Point(20, 120),new Point(20, 20) };
Rectangle myRect = new Rectangle(120, 120, 100, 100);
// Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath.AddLines(myPoints);
myPath.SetMarkers();
myPath.AddRectangle(myRect);
myPath.SetMarkers();
myPath.AddEllipse(220, 220, 100, 100);
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath.PointCount;
PointF[] myPathPoints = myPath.PathPoints;
byte[] myPathTypes = myPath.PathTypes;
// Set up variables for listing all the values of the path's
// points to the screen.
int i;
float j = 20;
Font myFont = new Font("Arial", 8);
SolidBrush myBrush = new SolidBrush(Color.Black);
// List the values for all of path points and types to
// the left side of the screen.
for(i=0; i < myPathPointCount; i++)
{
e.Graphics.DrawString(myPathPoints[i].X.ToString()+
", " + myPathPoints[i].Y.ToString() + ", " +
myPathTypes[i].ToString(), myFont, myBrush,
20, j);
j+=20;
}
// Create a GraphicsPathIterator.
GraphicsPathIterator myPathIterator = new
GraphicsPathIterator(myPath);
// Rewind the iterator.
myPathIterator.Rewind();
// Create a GraphicsPath to receive a section of myPath.
GraphicsPath myPathSection = new GraphicsPath();
// Retrieve and list the number of points contained in
// the first marker to the right side of the screen.
int markerPoints;
markerPoints = myPathIterator.NextMarker(myPathSection);
e.Graphics.DrawString("Marker: 1" + " Num Points: " +
markerPoints.ToString(), myFont, myBrush, 200, 20);
}
Public Sub NextMarkerExample2(ByVal e As PaintEventArgs)
' Create a graphics path.
Dim myPath As New GraphicsPath
' Set up primitives to add to myPath.
Dim myPoints As Point() = {New Point(20, 20), _
New Point(120, 120), New Point(20, 120), New Point(20, 20)}
Dim myRect As New Rectangle(120, 120, 100, 100)
' Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath.AddLines(myPoints)
myPath.SetMarkers()
myPath.AddRectangle(myRect)
myPath.SetMarkers()
myPath.AddEllipse(220, 220, 100, 100)
' Get the total number of points for the path,
' and the arrays of the points and types.
Dim myPathPointCount As Integer = myPath.PointCount
Dim myPathPoints As PointF() = myPath.PathPoints
Dim myPathTypes As Byte() = myPath.PathTypes
' Set up variables for drawing the array
' of points to the screen.
Dim i As Integer
Dim j As Single = 20
Dim myFont As New Font("Arial", 8)
Dim myBrush As New SolidBrush(Color.Black)
' Draw the set of path points and types to the screen.
For i = 0 To myPathPointCount - 1
e.Graphics.DrawString(myPathPoints(i).X.ToString() + _
", " + myPathPoints(i).Y.ToString() + ", " + _
myPathTypes(i).ToString(), myFont, myBrush, 20, j)
j += 20
Next i
' Create a GraphicsPathIterator.
Dim myPathIterator As New GraphicsPathIterator(myPath)
' Rewind the iterator.
myPathIterator.Rewind()
' Create a GraphicsPath section.
Dim myPathSection As New GraphicsPath
' List the points contained in the first marker
' to the screen.
Dim markerPoints As Integer
markerPoints = myPathIterator.NextMarker(myPathSection)
e.Graphics.DrawString("Marker: 1" + " Num Points: " + _
markerPoints.ToString(), myFont, myBrush, 200, 20)
End Sub
Poznámky
SetMarkers K nastavení značek v cestě použijte metodu . Značky se používají k vytváření skupin dílčích cest. Jedna nebo více dílčích cest může být mezi dvěma značkami.
Platí pro
NextMarker(Int32, Int32)
- Zdroj:
- GraphicsPathIterator.cs
- Zdroj:
- GraphicsPathIterator.cs
- Zdroj:
- GraphicsPathIterator.cs
Zvýší GraphicsPathIterator hodnotu na další značku v cestě a vrátí indexy start a stop prostřednictvím parametrů [out].
public:
int NextMarker([Runtime::InteropServices::Out] int % startIndex, [Runtime::InteropServices::Out] int % endIndex);
public int NextMarker (out int startIndex, out int endIndex);
member this.NextMarker : int * int -> int
Public Function NextMarker (ByRef startIndex As Integer, ByRef endIndex As Integer) As Integer
Parametry
- startIndex
- Int32
[out] Celočíselný odkaz zadaný na tento parametr obdrží index bodu, který spouští dílčí cestu.
- endIndex
- Int32
[out] Celočíselný odkaz zadaný na tento parametr obdrží index bodu, který končí dílčí cestu, na kterou startIndex
odkazuje.
Návraty
Počet bodů mezi touto a další značkou.
Příklady
Následující příklad je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
OnPaint objekt události . Kód provede následující akce:
Vytvoří GraphicsPath objekt.
Přidá tři čáry, obdélník a tři tečky 3/4 se značkami mezi jednotlivými čarami.
Nakreslí hodnoty pro pole bodů na obrazovku.
Vytvoří GraphicsPathIterator objekt.
Zavolá metodu NextMarker .
Používá hodnoty vrácené z iterativních volání metody k NextMarker vykreslení počátečního a stop bodu pro každou značku na obrazovce.
Nakreslí hodnotu celkového počtu bodů na obrazovku.
private:
void NextMarkerExample( PaintEventArgs^ e )
{
// Create the GraphicsPath.
GraphicsPath^ myPath = gcnew GraphicsPath;
array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
Rectangle myRect = Rectangle(120,120,100,100);
// Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath->AddLines( myPoints );
myPath->SetMarkers();
myPath->AddRectangle( myRect );
myPath->SetMarkers();
myPath->AddEllipse( 220, 220, 100, 100 );
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath->PointCount;
array<PointF>^myPathPoints = myPath->PathPoints;
array<Byte>^myPathTypes = myPath->PathTypes;
// Set up variables for drawing the array
// of points to the screen.
int i;
float j = 20;
System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
// Draw the set of path points and types to the screen.
for ( i = 0; i < myPathPointCount; i++ )
{
e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ], myFont, myBrush, 20, j );
j += 20;
}
// Create a GraphicsPathIterator.
GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
int myStartIndex;
int myEndIndex;
// Rewind the Iterator.
myPathIterator->Rewind();
// Draw the Markers and their start and end points
// to the screen.
j = 20;
for ( i = 0; i < 3; i++ )
{
myPathIterator->NextMarker( myStartIndex, myEndIndex );
e->Graphics->DrawString( String::Format( "Marker {0}: Start: {1} End: {2}", i, myStartIndex, myEndIndex ),
myFont, myBrush, 200, j );
j += 20;
}
// Draw the total number of points to the screen.
j += 20;
int myPathTotalPoints = myPathIterator->Count;
e->Graphics->DrawString( String::Format( "Total Points = {0}", myPathTotalPoints ), myFont, myBrush, 200, j );
}
private void NextMarkerExample(PaintEventArgs e)
{
// Create the GraphicsPath.
GraphicsPath myPath = new GraphicsPath();
Point[] myPoints = {new Point(20, 20), new Point(120, 120),
new Point(20, 120),new Point(20, 20) };
Rectangle myRect = new Rectangle(120, 120, 100, 100);
// Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath.AddLines(myPoints);
myPath.SetMarkers();
myPath.AddRectangle(myRect);
myPath.SetMarkers();
myPath.AddEllipse(220, 220, 100, 100);
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath.PointCount;
PointF[] myPathPoints = myPath.PathPoints;
byte[] myPathTypes = myPath.PathTypes;
// Set up variables for drawing the array
// of points to the screen.
int i;
float j = 20;
Font myFont = new Font("Arial", 8);
SolidBrush myBrush = new SolidBrush(Color.Black);
// Draw the set of path points and types to the screen.
for(i=0; i<myPathPointCount; i++)
{
e.Graphics.DrawString(myPathPoints[i].X.ToString()+
", " + myPathPoints[i].Y.ToString() + ", " +
myPathTypes[i].ToString(),
myFont,
myBrush,
20,
j);
j+=20;
}
// Create a GraphicsPathIterator.
GraphicsPathIterator myPathIterator = new
GraphicsPathIterator(myPath);
int myStartIndex;
int myEndIndex;
// Rewind the Iterator.
myPathIterator.Rewind();
// Draw the Markers and their start and end points
// to the screen.
j=20;
for(i=0;i<3;i++)
{
myPathIterator.NextMarker(out myStartIndex, out myEndIndex);
e.Graphics.DrawString("Marker " + i.ToString() +
": Start: " + myStartIndex.ToString()+
" End: " + myEndIndex.ToString(),
myFont,
myBrush,
200,
j);
j += 20;
}
// Draw the total number of points to the screen.
j += 20;
int myPathTotalPoints = myPathIterator.Count;
e.Graphics.DrawString("Total Points = " +
myPathTotalPoints.ToString(),
myFont,
myBrush,
200,
j);
}
Public Sub NextMarkerExample(ByVal e As PaintEventArgs)
' Create the GraphicsPath.
Dim myPath As New GraphicsPath
Dim myPoints As Point() = {New Point(20, 20), _
New Point(120, 120), New Point(20, 120), New Point(20, 20)}
Dim myRect As New Rectangle(120, 120, 100, 100)
' Add 3 lines, a rectangle, an ellipse, and 2 markers.
myPath.AddLines(myPoints)
myPath.SetMarkers()
myPath.AddRectangle(myRect)
myPath.SetMarkers()
myPath.AddEllipse(220, 220, 100, 100)
' Get the total number of points for the path,
' and the arrays of the points and types.
Dim myPathPointCount As Integer = myPath.PointCount
Dim myPathPoints As PointF() = myPath.PathPoints
Dim myPathTypes As Byte() = myPath.PathTypes
' Set up variables for drawing the array of points to the screen.
Dim i As Integer
Dim j As Single = 20
Dim myFont As New Font("Arial", 8)
Dim myBrush As New SolidBrush(Color.Black)
' Draw the set of path points and types to the screen.
For i = 0 To myPathPointCount - 1
e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
myPathPoints(i).Y.ToString() + ", " + _
myPathTypes(i).ToString(), myFont, myBrush, 20, j)
j += 20
Next i
' Create a GraphicsPathIterator.
Dim myPathIterator As New GraphicsPathIterator(myPath)
Dim myStartIndex As Integer
Dim myEndIndex As Integer
' Rewind the Iterator.
myPathIterator.Rewind()
' Draw the Markers and their start and end points to the screen.
j = 20
For i = 0 To 2
myPathIterator.NextMarker(myStartIndex, myEndIndex)
e.Graphics.DrawString("Marker " + i.ToString() + _
": Start: " + myStartIndex.ToString() + " End: " + _
myEndIndex.ToString(), myFont, myBrush, 200, j)
j += 20
Next i
' Draw the total number of points to the screen.
j += 20
Dim myPathTotalPoints As Integer = myPathIterator.Count
e.Graphics.DrawString("Total Points = " + _
myPathTotalPoints.ToString(), myFont, myBrush, 200, j)
End Sub
Poznámky
SetMarkers K nastavení značek v cestě použijte metodu . Značky se používají k vytváření skupin dílčích cest. Jedna nebo více dílčích cest může být mezi dvěma značkami.
Platí pro
Váš názor
https://aka.ms/ContentUserFeedback.
Připravujeme: V průběhu roku 2024 budeme postupně vyřazovat problémy z GitHub coby mechanismus zpětné vazby pro obsah a nahrazovat ho novým systémem zpětné vazby. Další informace naleznete v tématu:Odeslat a zobrazit názory pro