Graphics.DrawArc Metoda
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Nakreslí oblouk představující část tří teček určenou dvojicí souřadnic, šířkou a výškou.
Přetížení
DrawArc(Pen, Rectangle, Single, Single) |
Nakreslí oblouk představující část tří teček určenou strukturou Rectangle . |
DrawArc(Pen, RectangleF, Single, Single) |
Nakreslí oblouk představující část tří teček určenou strukturou RectangleF . |
DrawArc(Pen, Int32, Int32, Int32, Int32, Int32, Int32) |
Nakreslí oblouk představující část tří teček určenou dvojicí souřadnic, šířkou a výškou. |
DrawArc(Pen, Single, Single, Single, Single, Single, Single) |
Nakreslí oblouk představující část tří teček určenou dvojicí souřadnic, šířkou a výškou. |
DrawArc(Pen, Rectangle, Single, Single)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nakreslí oblouk představující část tří teček určenou strukturou Rectangle .
public:
void DrawArc(System::Drawing::Pen ^ pen, System::Drawing::Rectangle rect, float startAngle, float sweepAngle);
public void DrawArc (System.Drawing.Pen pen, System.Drawing.Rectangle rect, float startAngle, float sweepAngle);
member this.DrawArc : System.Drawing.Pen * System.Drawing.Rectangle * single * single -> unit
Public Sub DrawArc (pen As Pen, rect As Rectangle, startAngle As Single, sweepAngle As Single)
Parametry
- rect
- Rectangle
RectangleF definuje hranice tří teček.
- startAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od osy x k výchozímu bodu oblouku.
- sweepAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od parametru startAngle
k koncovému bodu oblouku.
Výjimky
pen
je null
.
Příklady
Následující příklad kódu je určen pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří černé pero.
Vytvoří obdélník pro vazbu se třemi tečky.
Definuje počáteční (45 stupňů) a úhly zametání (270 stupňů).
Nakreslí eliptický oblouk na obrazovku.
Výsledkem je částečná tři tečka, která chybí segment mezi + a - 45 stupni osy x.
private:
void DrawArcRectangle( PaintEventArgs^ e )
{
// Create pen.
Pen^ blackPen = gcnew Pen( Color::Black,3.0f );
// Create rectangle to bound ellipse.
Rectangle rect = Rectangle(0,0,100,200);
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e->Graphics->DrawArc( blackPen, rect, startAngle, sweepAngle );
}
private void DrawArcRectangle(PaintEventArgs e)
{
// Create pen.
Pen blackPen= new Pen(Color.Black, 3);
// Create rectangle to bound ellipse.
Rectangle rect = new Rectangle(0, 0, 100, 200);
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e.Graphics.DrawArc(blackPen, rect, startAngle, sweepAngle);
}
Private Sub DrawArcRectangle(ByVal e As PaintEventArgs)
' Create pen.
Dim blackPen As New Pen(Color.Black, 3)
' Create rectangle to bound ellipse.
Dim rect As New Rectangle(0, 0, 100, 200)
' Create start and sweep angles on ellipse.
Dim startAngle As Single = 45.0F
Dim sweepAngle As Single = 270.0F
' Draw arc to screen.
e.Graphics.DrawArc(blackPen, rect, startAngle, sweepAngle)
End Sub
Poznámky
Tato metoda nakreslí oblouk, který je součástí obvodu tři tečky. Tři tečky jsou definovány hranicemi obdélníku. Oblouk je část obvodu tří teček mezi parametrem startAngle
a startAngle
+ sweepAngle
parametry.
Platí pro
DrawArc(Pen, RectangleF, Single, Single)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nakreslí oblouk představující část tří teček určenou strukturou RectangleF .
public:
void DrawArc(System::Drawing::Pen ^ pen, System::Drawing::RectangleF rect, float startAngle, float sweepAngle);
public void DrawArc (System.Drawing.Pen pen, System.Drawing.RectangleF rect, float startAngle, float sweepAngle);
member this.DrawArc : System.Drawing.Pen * System.Drawing.RectangleF * single * single -> unit
Public Sub DrawArc (pen As Pen, rect As RectangleF, startAngle As Single, sweepAngle As Single)
Parametry
- rect
- RectangleF
RectangleF definuje hranice tří teček.
- startAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od osy x k výchozímu bodu oblouku.
- sweepAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od parametru startAngle
k koncovému bodu oblouku.
Výjimky
pen
je null
Příklady
Následující příklad kódu je určen pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří černé pero.
Vytvoří obdélník pro vazbu se třemi tečky.
Definuje počáteční (45 stupňů) a úhly zametání (270 stupňů).
Nakreslí eliptický oblouk na obrazovku.
Výsledkem je částečná tři tečka, která chybí segment mezi + a - 45 stupni osy x.
private:
void DrawArcRectangleF( PaintEventArgs^ e )
{
// Create pen.
Pen^ blackPen = gcnew Pen( Color::Black,3.0f );
// Create rectangle to bound ellipse.
RectangleF rect = RectangleF(0.0F,0.0F,100.0F,200.0F);
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e->Graphics->DrawArc( blackPen, rect, startAngle, sweepAngle );
}
private void DrawArcRectangleF(PaintEventArgs e)
{
// Create pen.
Pen blackPen= new Pen(Color.Black, 3);
// Create rectangle to bound ellipse.
RectangleF rect = new RectangleF(0.0F, 0.0F, 100.0F, 200.0F);
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e.Graphics.DrawArc(blackPen, rect, startAngle, sweepAngle);
}
Private Sub DrawArcRectangleF(ByVal e As PaintEventArgs)
' Create pen.
Dim blackPen As New Pen(Color.Black, 3)
' Create rectangle to bound ellipse.
Dim rect As New RectangleF(0.0F, 0.0F, 100.0F, 200.0F)
' Create start and sweep angles on ellipse.
Dim startAngle As Single = 45.0F
Dim sweepAngle As Single = 270.0F
' Draw arc to screen.
e.Graphics.DrawArc(blackPen, rect, startAngle, sweepAngle)
End Sub
Poznámky
Tato metoda nakreslí oblouk, který je součástí obvodu tři tečky. Tři tečky jsou definovány hranicemi obdélníku. Oblouk je část obvodu tří teček mezi parametrem startAngle
a startAngle
+ sweepAngle
parametry.
Platí pro
DrawArc(Pen, Int32, Int32, Int32, Int32, Int32, Int32)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nakreslí oblouk představující část tří teček určenou dvojicí souřadnic, šířkou a výškou.
public:
void DrawArc(System::Drawing::Pen ^ pen, int x, int y, int width, int height, int startAngle, int sweepAngle);
public void DrawArc (System.Drawing.Pen pen, int x, int y, int width, int height, int startAngle, int sweepAngle);
member this.DrawArc : System.Drawing.Pen * int * int * int * int * int * int -> unit
Public Sub DrawArc (pen As Pen, x As Integer, y As Integer, width As Integer, height As Integer, startAngle As Integer, sweepAngle As Integer)
Parametry
- x
- Int32
Souřadnice x v levém horním rohu obdélníku, která definuje tři tečky.
- y
- Int32
Souřadnice y v levém horním rohu obdélníku, který definuje tři tečky.
- width
- Int32
Šířka obdélníku, který definuje tři tečky.
- height
- Int32
Výška obdélníku, který definuje tři tečky.
- startAngle
- Int32
Úhel ve stupních měřený po směru hodinových ručiček od osy x k výchozímu bodu oblouku.
- sweepAngle
- Int32
Úhel ve stupních měřený po směru hodinových ručiček od parametru startAngle
k koncovému bodu oblouku.
Výjimky
pen
je null
.
Příklady
Následující příklad kódu je určen pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří černé pero.
Vytvoří pozici a velikost obdélníku pro vazbu se třemi tečky.
Definuje počáteční (45 stupňů) a úhly zametání (270 stupňů).
Nakreslí eliptický oblouk na obrazovku.
Výsledkem je částečná tři tečka, která chybí segment mezi + a - 45 stupni osy x.
private:
void DrawArcInt( PaintEventArgs^ e )
{
// Create pen.
Pen^ blackPen = gcnew Pen( Color::Black,3.0f );
// Create coordinates of rectangle to bound ellipse.
int x = 0;
int y = 0;
int width = 100;
int height = 200;
// Create start and sweep angles on ellipse.
int startAngle = 45;
int sweepAngle = 270;
// Draw arc to screen.
e->Graphics->DrawArc( blackPen, x, y, width, height, startAngle, sweepAngle );
}
private void DrawArcInt(PaintEventArgs e)
{
// Create pen.
Pen blackPen= new Pen(Color.Black, 3);
// Create coordinates of rectangle to bound ellipse.
int x = 0;
int y = 0;
int width = 100;
int height = 200;
// Create start and sweep angles on ellipse.
int startAngle = 45;
int sweepAngle = 270;
// Draw arc to screen.
e.Graphics.DrawArc(blackPen, x, y, width, height, startAngle, sweepAngle);
}
Private Sub DrawArcInt(ByVal e As PaintEventArgs)
' Create pen.
Dim blackPen As New Pen(Color.Black, 3)
' Create coordinates of rectangle to bound ellipse.
Dim x As Integer = 0
Dim y As Integer = 0
Dim width As Integer = 100
Dim height As Integer = 200
' Create start and sweep angles on ellipse.
Dim startAngle As Integer = 45
Dim sweepAngle As Integer = 270
' Draw arc to screen.
e.Graphics.DrawArc(blackPen, x, y, width, height, startAngle, _
sweepAngle)
End Sub
Poznámky
Tato metoda nakreslí oblouk, který je součástí obvodu tři tečky. Tři tečky jsou definovány hranicemi obdélníku. Oblouk je část obvodu tří teček mezi parametrem startAngle
a startAngle
+ sweepAngle
parametry.
Platí pro
DrawArc(Pen, Single, Single, Single, Single, Single, Single)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nakreslí oblouk představující část tří teček určenou dvojicí souřadnic, šířkou a výškou.
public:
void DrawArc(System::Drawing::Pen ^ pen, float x, float y, float width, float height, float startAngle, float sweepAngle);
public void DrawArc (System.Drawing.Pen pen, float x, float y, float width, float height, float startAngle, float sweepAngle);
member this.DrawArc : System.Drawing.Pen * single * single * single * single * single * single -> unit
Public Sub DrawArc (pen As Pen, x As Single, y As Single, width As Single, height As Single, startAngle As Single, sweepAngle As Single)
Parametry
- x
- Single
Souřadnice x v levém horním rohu obdélníku, která definuje tři tečky.
- y
- Single
Souřadnice y v levém horním rohu obdélníku, který definuje tři tečky.
- width
- Single
Šířka obdélníku, který definuje tři tečky.
- height
- Single
Výška obdélníku, který definuje tři tečky.
- startAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od osy x k výchozímu bodu oblouku.
- sweepAngle
- Single
Úhel ve stupních měřený po směru hodinových ručiček od parametru startAngle
k koncovému bodu oblouku.
Výjimky
pen
je null
.
Příklady
Následující příklad kódu je určen pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří černé pero.
Vytvoří pozici a velikost obdélníku pro vazbu se třemi tečky.
Definuje počáteční (45 stupňů) a úhly zametání (270 stupňů).
Nakreslí eliptický oblouk na obrazovku.
Výsledkem je částečná tři tečka, která chybí segment mezi + a - 45 stupni osy x.
private:
void DrawArcFloat( PaintEventArgs^ e )
{
// Create pen.
Pen^ blackPen = gcnew Pen( Color::Black,3.0f );
// Create coordinates of rectangle to bound ellipse.
float x = 0.0F;
float y = 0.0F;
float width = 100.0F;
float height = 200.0F;
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e->Graphics->DrawArc( blackPen, x, y, width, height, startAngle, sweepAngle );
}
private void DrawArcFloat(PaintEventArgs e)
{
// Create pen.
Pen blackPen= new Pen(Color.Black, 3);
// Create coordinates of rectangle to bound ellipse.
float x = 0.0F;
float y = 0.0F;
float width = 100.0F;
float height = 200.0F;
// Create start and sweep angles on ellipse.
float startAngle = 45.0F;
float sweepAngle = 270.0F;
// Draw arc to screen.
e.Graphics.DrawArc(blackPen, x, y, width, height, startAngle, sweepAngle);
}
Private Sub DrawArcFloat(ByVal e As PaintEventArgs)
' Create pen.
Dim blackPen As New Pen(Color.Black, 3)
' Create coordinates of rectangle to bound ellipse.
Dim x As Single = 0.0F
Dim y As Single = 0.0F
Dim width As Single = 100.0F
Dim height As Single = 200.0F
' Create start and sweep angles on ellipse.
Dim startAngle As Single = 45.0F
Dim sweepAngle As Single = 270.0F
' Draw arc to screen.
e.Graphics.DrawArc(blackPen, x, y, width, height, startAngle, _
sweepAngle)
End Sub
Poznámky
Tato metoda nakreslí oblouk, který je součástí obvodu tři tečky. Tři tečky jsou definovány hranicemi obdélníku. Oblouk je část obvodu tří teček mezi parametrem startAngle
a startAngle
+ sweepAngle
parametry.
Platí pro
Váš názor
https://aka.ms/ContentUserFeedback.
Připravujeme: V průběhu roku 2024 budeme postupně vyřazovat problémy z GitHub coby mechanismus zpětné vazby pro obsah a nahrazovat ho novým systémem zpětné vazby. Další informace naleznete v tématu:Odeslat a zobrazit názory pro