Graphics.SetClip Metoda
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Přetížení
SetClip(Region, CombineMode) |
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace kombinující aktuální oblast klipu a zadanou Regionoblast . |
SetClip(RectangleF, CombineMode) |
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace kombinováním aktuální oblasti klipu a obdélníku určeného strukturou RectangleF . |
SetClip(Rectangle, CombineMode) |
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace kombinováním aktuální oblasti klipu a obdélníku určeného strukturou Rectangle . |
SetClip(Graphics, CombineMode) |
Nastaví oblast oříznutí na Graphics výsledek zadané operace kombinování aktuální oblasti klipu Clip a vlastnosti zadaného Graphicsobjektu . |
SetClip(RectangleF) |
Nastaví oblast oříznutí na Graphics obdélník určený strukturou RectangleF . |
SetClip(Rectangle) |
Nastaví oblast oříznutí na Graphics obdélník určený strukturou Rectangle . |
SetClip(Graphics) |
Nastaví oblast oříznutí tohoto Graphics objektu na |
SetClip(GraphicsPath) |
Nastaví oblast oříznutí na zadanou GraphicsGraphicsPath. |
SetClip(GraphicsPath, CombineMode) |
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace kombinující aktuální oblast klipu a zadanou GraphicsPathoblast . |
SetClip(Region, CombineMode)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
public:
void SetClip(System::Drawing::Region ^ region, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Region region, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Region * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (region As Region, combineMode As CombineMode)
Parametry
- combineMode
- CombineMode
Člen z výčtu CombineMode , který určuje operaci kombinování, která se má použít.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří malý obdélník pro oblast oříznutí.
Nastaví oblast oříznutí na obdélník s Replace členem.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý vyplněný černý obdélník.
public:
void SetClipRegionCombine( PaintEventArgs^ e )
{
// Create region for clipping.
System::Drawing::Region^ clipRegion = gcnew System::Drawing::Region( Rectangle(0,0,100,100) );
// Set clipping region of graphics to region.
e->Graphics->SetClip( clipRegion, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRegionCombine(PaintEventArgs e)
{
// Create region for clipping.
Region clipRegion = new Region(new Rectangle(0, 0, 100, 100));
// Set clipping region of graphics to region.
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRegionCombine(ByVal e As PaintEventArgs)
' Create region for clipping.
Dim clipRegion As New [Region](New Rectangle(0, 0, 100, 100))
' Set clipping region of graphics to region.
e.Graphics.SetClip(clipRegion, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Platí pro
SetClip(RectangleF, CombineMode)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace kombinováním aktuální oblasti klipu a obdélníku určeného strukturou RectangleF .
public:
void SetClip(System::Drawing::RectangleF rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.RectangleF rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.RectangleF * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As RectangleF, combineMode As CombineMode)
Parametry
- rect
- RectangleF
RectangleF struktury, která se má kombinovat.
- combineMode
- CombineMode
Člen výčtu CombineMode , který určuje operaci kombinování, která se má použít.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří malý obdélník pro oblast oříznutí.
Nastaví oblast oříznutí na obdélník s Replace členem.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý vyplněný černý obdélník.
public:
void SetClipRectangleFCombine( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleFCombine(PaintEventArgs e)
{
// Create rectangle for clipping region.
RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleFCombine(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Platí pro
SetClip(Rectangle, CombineMode)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
public:
void SetClip(System::Drawing::Rectangle rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Rectangle rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Rectangle * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As Rectangle, combineMode As CombineMode)
Parametry
- combineMode
- CombineMode
Člen výčtu CombineMode , který určuje operaci kombinování, která se má použít.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří malý obdélník pro oblast oříznutí.
Nastaví oblast oříznutí na obdélník s Replace členem.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý vyplněný černý obdélník.
public:
void SetClipRectangleCombine( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
Rectangle clipRect = Rectangle(0,0,100,100);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleCombine(PaintEventArgs e)
{
// Create rectangle for clipping region.
Rectangle clipRect = new Rectangle(0, 0, 100, 100);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleCombine(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New Rectangle(0, 0, 100, 100)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Platí pro
SetClip(Graphics, CombineMode)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
public:
void SetClip(System::Drawing::Graphics ^ g, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Graphics g, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Graphics * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (g As Graphics, combineMode As CombineMode)
Parametry
- combineMode
- CombineMode
Člen výčtu CombineMode , který určuje operaci kombinování, která se má použít.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné Paint rutiny události, a thisForm
také , pro Form příklad . Kód provede následující akce:
Nastaví oblast oříznutí dočasné Graphics na malý čtverec.
Aktualizace oblast výřezu grafického objektu formuláře na oblast nového Graphics se Replace členem.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý, plný, černý čtverec.
public:
void SetClipGraphicsCombine( PaintEventArgs^ e )
{
// Create temporary graphics object and set its clipping region.
Graphics^ newGraphics = this->CreateGraphics();
newGraphics->SetClip( Rectangle(0,0,100,100) );
// Update clipping region of graphics to clipping region of new
// graphics.
e->Graphics->SetClip( newGraphics, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
// Release new graphics.
delete newGraphics;
}
private void SetClipGraphicsCombine(PaintEventArgs e)
{
// Create temporary graphics object and set its clipping region.
Graphics newGraphics = this.CreateGraphics();
newGraphics.SetClip(new Rectangle(0, 0, 100, 100));
// Update clipping region of graphics to clipping region of new
// graphics.
e.Graphics.SetClip(newGraphics, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
// Release new graphics.
newGraphics.Dispose();
}
Private Sub SetClipGraphicsCombine(ByVal e As PaintEventArgs)
' Create temporary graphics object and set its clipping region.
Dim newGraphics As Graphics = Me.CreateGraphics()
newGraphics.SetClip(New Rectangle(0, 0, 100, 100))
' Update clipping region of graphics to clipping region of new
' graphics.
e.Graphics.SetClip(newGraphics, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
' Release new graphics.
newGraphics.Dispose()
End Sub
Platí pro
SetClip(RectangleF)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nastaví oblast oříznutí na Graphics obdélník určený strukturou RectangleF .
public:
void SetClip(System::Drawing::RectangleF rect);
public void SetClip (System.Drawing.RectangleF rect);
member this.SetClip : System.Drawing.RectangleF -> unit
Public Sub SetClip (rect As RectangleF)
Parametry
- rect
- RectangleF
RectangleF , která představuje novou oblast klipu.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří malý obdélník pro oblast oříznutí.
Nastaví oblast oříznutí na obdélník.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý vyplněný černý obdélník.
public:
void SetClipRectangleF( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleF(PaintEventArgs e)
{
// Create rectangle for clipping region.
RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleF(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Platí pro
SetClip(Rectangle)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
public:
void SetClip(System::Drawing::Rectangle rect);
public void SetClip (System.Drawing.Rectangle rect);
member this.SetClip : System.Drawing.Rectangle -> unit
Public Sub SetClip (rect As Rectangle)
Parametry
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří malý obdélník pro oblast oříznutí.
Nastaví oblast oříznutí na obdélník.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý vyplněný černý obdélník.
public:
void SetClipRectangle( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
Rectangle clipRect = Rectangle(0,0,100,100);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangle(PaintEventArgs e)
{
// Create rectangle for clipping region.
Rectangle clipRect = new Rectangle(0, 0, 100, 100);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangle(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New Rectangle(0, 0, 100, 100)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Platí pro
SetClip(Graphics)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
public:
void SetClip(System::Drawing::Graphics ^ g);
public void SetClip (System.Drawing.Graphics g);
member this.SetClip : System.Drawing.Graphics -> unit
Public Sub SetClip (g As Graphics)
Parametry
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné Paint rutiny události, a thisForm
také , pro Form příklad . Kód provede následující akce:
Nastaví oblast oříznutí dočasné Graphics na malý čtverec.
Aktualizace oblast výřezu grafického objektu formuláře na oblast dočasného Graphicsobjektu .
Vyplní velký obdélník plným černým štětcem.
Výsledkem je malý, plný, černý čtverec.
public:
void SetClipGraphics( PaintEventArgs^ e )
{
// Create temporary graphics object and set its clipping region.
Graphics^ newGraphics = this->CreateGraphics();
newGraphics->SetClip( Rectangle(0,0,100,100) );
// Update clipping region of graphics to clipping region of new
// graphics.
e->Graphics->SetClip( newGraphics );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
// Release new graphics.
delete newGraphics;
}
private void SetClipGraphics(PaintEventArgs e)
{
// Create temporary graphics object and set its clipping region.
Graphics newGraphics = this.CreateGraphics();
newGraphics.SetClip(new Rectangle(0, 0, 100, 100));
// Update clipping region of graphics to clipping region of new
// graphics.
e.Graphics.SetClip(newGraphics);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
// Release new graphics.
newGraphics.Dispose();
}
Private Sub SetClipGraphics(ByVal e As PaintEventArgs)
' Create temporary graphics object and set its clipping region.
Dim newGraphics As Graphics = Me.CreateGraphics()
newGraphics.SetClip(New Rectangle(0, 0, 100, 100))
' Update clipping region of graphics to clipping region of new
' graphics.
e.Graphics.SetClip(newGraphics)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
' Release new graphics.
newGraphics.Dispose()
End Sub
Platí pro
SetClip(GraphicsPath)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nastaví oblast oříznutí na zadanou GraphicsGraphicsPath.
public:
void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath -> unit
Public Sub SetClip (path As GraphicsPath)
Parametry
- path
- GraphicsPath
GraphicsPath , který představuje novou oblast klipu.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří cestu grafiky a přidá do cesty tři tečky.
Nastaví oblast oříznutí na eliptickou cestu.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je plná černá elipsa.
public:
void SetClipPath( PaintEventArgs^ e )
{
// Create graphics path.
GraphicsPath^ clipPath = gcnew GraphicsPath;
clipPath->AddEllipse( 0, 0, 200, 100 );
// Set clipping region to path.
e->Graphics->SetClip( clipPath );
// Fill rectangle to demonstrate clipping region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipPath(PaintEventArgs e)
{
// Create graphics path.
GraphicsPath clipPath = new GraphicsPath();
clipPath.AddEllipse(0, 0, 200, 100);
// Set clipping region to path.
e.Graphics.SetClip(clipPath);
// Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPath(ByVal e As PaintEventArgs)
' Create graphics path.
Dim clipPath As New GraphicsPath
clipPath.AddEllipse(0, 0, 200, 100)
' Set clipping region to path.
e.Graphics.SetClip(clipPath)
' Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Poznámky
Pokud není cesta grafiky reprezentovaná parametrem path
uzavřena, je přidán další segment z posledního bodu do prvního bodu, aby se cesta zavřela.
Platí pro
SetClip(GraphicsPath, CombineMode)
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
- Zdroj:
- Graphics.cs
Nastaví oblast oříznutí této Graphics operace na výsledek zadané operace, která kombinuje aktuální oblast klipu a zadanou GraphicsPathoblast .
public:
void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (path As GraphicsPath, combineMode As CombineMode)
Parametry
- path
- GraphicsPath
GraphicsPath a kombinujte.
- combineMode
- CombineMode
Člen výčtu CombineMode , který určuje operaci kombinování, která se má použít.
Příklady
Následující příklad kódu je navržený pro použití s model Windows Forms a vyžaduje PaintEventArgse
, což je parametr obslužné rutiny Paint události. Kód provede následující akce:
Vytvoří cestu grafiky a přidá do cesty tři tečky.
Nastaví oblast oříznutí na eliptickou cestu se Replace členem.
Vyplní velký obdélník plným černým štětcem.
Výsledkem je plná černá elipsa.
public:
void SetClipPathCombine( PaintEventArgs^ e )
{
// Create graphics path.
GraphicsPath^ clipPath = gcnew GraphicsPath;
clipPath->AddEllipse( 0, 0, 200, 100 );
// Set clipping region to path.
e->Graphics->SetClip( clipPath, CombineMode::Replace );
// Fill rectangle to demonstrate clipping region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipPathCombine(PaintEventArgs e)
{
// Create graphics path.
GraphicsPath clipPath = new GraphicsPath();
clipPath.AddEllipse(0, 0, 200, 100);
// Set clipping region to path.
e.Graphics.SetClip(clipPath, CombineMode.Replace);
// Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPathCombine(ByVal e As PaintEventArgs)
' Create graphics path.
Dim clipPath As New GraphicsPath
clipPath.AddEllipse(0, 0, 200, 100)
' Set clipping region to path.
e.Graphics.SetClip(clipPath, CombineMode.Replace)
' Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Poznámky
Pokud cesta k grafikě reprezentovaná parametrem path
není uzavřena, přidá se další segment z posledního bodu do prvního bodu, který cestu uzavře.
Platí pro
Váš názor
https://aka.ms/ContentUserFeedback.
Připravujeme: V průběhu roku 2024 budeme postupně vyřazovat problémy z GitHub coby mechanismus zpětné vazby pro obsah a nahrazovat ho novým systémem zpětné vazby. Další informace naleznete v tématu:Odeslat a zobrazit názory pro