Semaphore.SetAccessControl(SemaphoreSecurity) Metoda
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Nastaví zabezpečení řízení přístupu pro pojmenovaný systémový semaphore.
public:
void SetAccessControl(System::Security::AccessControl::SemaphoreSecurity ^ semaphoreSecurity);public void SetAccessControl (System.Security.AccessControl.SemaphoreSecurity semaphoreSecurity);member this.SetAccessControl : System.Security.AccessControl.SemaphoreSecurity -> unitPublic Sub SetAccessControl (semaphoreSecurity As SemaphoreSecurity)Parametry
- semaphoreSecurity
- SemaphoreSecurity
Objekt SemaphoreSecurity , který představuje zabezpečení řízení přístupu, které se má použít u pojmenovaného systémového semaphore.
Výjimky
semaphoreSecurity je null.
Uživatel nemá ChangePermissions práva.
-nebo- Semaphore nebyl otevřen s právy ChangePermissions .
Aktuální Semaphore objekt nepředstavuje pojmenovaný systémový semaphore.
Příklady
Následující příklad kódu ukazuje chování křížového procesu pojmenovaného semaphore se zabezpečením řízení přístupu. Příklad používá OpenExisting(String) přetížení metody k otestování existence pojmenovaného semaphore.
Pokud semaphore neexistuje, vytvoří se s maximálním počtem dvou a se zabezpečením řízení přístupu, které uživateli odepře právo použít semaphore, ale udělí oprávnění ke čtení a změně oprávnění k semaphore.
Pokud spustíte zkompilovaný příklad ze dvou oken příkazů, druhá kopie vyvolá výjimku porušení přístupu při volání OpenExisting(String) metody. Výjimka je zachycena a příklad používá OpenExisting(String, SemaphoreRights) přetížení metody k otevření semaphore s právy potřebnými ke čtení a změně oprávnění.
Po změně oprávnění se pomocí SetAccessControl metody otevře semaphore s právy potřebnými k zadání a uvolnění. Pokud zkompilovaný příklad spustíte z třetího příkazového okna, spustí se pomocí nových oprávnění.
#using <System.dll>
using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;
public ref class Example
{
public:
[SecurityPermissionAttribute(SecurityAction::Demand, Flags = SecurityPermissionFlag::UnmanagedCode)]
static void main()
{
String^ semaphoreName = L"SemaphoreExample5";
Semaphore^ sem = nullptr;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( WaitHandleCannotBeOpenedException^ ex )
{
Console::WriteLine( L"Semaphore does not exist." );
doesNotExist = true;
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if ( doesNotExist )
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
SemaphoreSecurity^ semSec = gcnew SemaphoreSecurity;
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->AddAccessRule( rule );
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = gcnew Semaphore( 3,3,semaphoreName,semaphoreWasCreated,semSec );
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if ( semaphoreWasCreated )
{
Console::WriteLine( L"Created the semaphore." );
}
else
{
Console::WriteLine( L"Unable to create the semaphore." );
return;
}
}
else if ( unauthorized )
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore::OpenExisting( semaphoreName,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ));
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity^ semSec = sem->GetAccessControl();
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->RemoveAccessRule( rule );
// Now grant the user the correct rights.
//
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem->SetAccessControl( semSec );
Console::WriteLine( L"Updated semaphore security." );
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unable to change permissions: {0}", ex->Message );
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem->WaitOne();
Console::WriteLine( L"Entered the semaphore." );
Console::WriteLine( L"Press the Enter key to exit." );
Console::ReadLine();
sem->Release();
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
}
}
};
using System;
using System.Threading;
using System.Security.AccessControl;
internal class Example
{
internal static void Main()
{
const string semaphoreName = "SemaphoreExample5";
Semaphore sem = null;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(WaitHandleCannotBeOpenedException)
{
Console.WriteLine("Semaphore does not exist.");
doesNotExist = true;
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if (doesNotExist)
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
SemaphoreSecurity semSec = new SemaphoreSecurity();
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.AddAccessRule(rule);
rule = new SemaphoreAccessRule(
user,
SemaphoreRights.ReadPermissions | SemaphoreRights.ChangePermissions,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = new Semaphore(3, 3, semaphoreName,
out semaphoreWasCreated, semSec);
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if (semaphoreWasCreated)
{
Console.WriteLine("Created the semaphore.");
}
else
{
Console.WriteLine("Unable to create the semaphore.");
return;
}
}
else if (unauthorized)
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore.OpenExisting(
semaphoreName,
SemaphoreRights.ReadPermissions
| SemaphoreRights.ChangePermissions);
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity semSec = sem.GetAccessControl();
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.RemoveAccessRule(rule);
// Now grant the user the correct rights.
//
rule = new SemaphoreAccessRule(user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec);
Console.WriteLine("Updated semaphore security.");
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unable to change permissions: {0}", ex.Message);
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem.WaitOne();
Console.WriteLine("Entered the semaphore.");
Console.WriteLine("Press the Enter key to exit.");
Console.ReadLine();
sem.Release();
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
}
}
}
Imports System.Threading
Imports System.Security.AccessControl
Friend Class Example
<MTAThread> _
Friend Shared Sub Main()
Const semaphoreName As String = "SemaphoreExample5"
Dim sem As Semaphore = Nothing
Dim doesNotExist as Boolean = False
Dim unauthorized As Boolean = False
' Attempt to open the named semaphore.
Try
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), to enter and release the
' named semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As WaitHandleCannotBeOpenedException
Console.WriteLine("Semaphore does not exist.")
doesNotExist = True
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", ex.Message)
unauthorized = True
End Try
' There are three cases: (1) The semaphore does not exist.
' (2) The semaphore exists, but the current user doesn't
' have access. (3) The semaphore exists and the user has
' access.
'
If doesNotExist Then
' The semaphore does not exist, so create it.
'
' The value of this variable is set by the semaphore
' constructor. It is True if the named system semaphore was
' created, and False if the named semaphore already existed.
'
Dim semaphoreWasCreated As Boolean
' Create an access control list (ACL) that denies the
' current user the right to enter or release the
' semaphore, but allows the right to read and change
' security information for the semaphore.
'
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
Dim semSec As New SemaphoreSecurity()
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.AddAccessRule(rule)
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Create a Semaphore object that represents the system
' semaphore named by the constant 'semaphoreName', with
' maximum count three, initial count three, and the
' specified security access. The Boolean value that
' indicates creation of the underlying system object is
' placed in semaphoreWasCreated.
'
sem = New Semaphore(3, 3, semaphoreName, _
semaphoreWasCreated, semSec)
' If the named system semaphore was created, it can be
' used by the current instance of this program, even
' though the current user is denied access. The current
' program enters the semaphore. Otherwise, exit the
' program.
'
If semaphoreWasCreated Then
Console.WriteLine("Created the semaphore.")
Else
Console.WriteLine("Unable to create the semaphore.")
Return
End If
ElseIf unauthorized Then
' Open the semaphore to read and change the access
' control security. The access control security defined
' above allows the current user to do this.
'
Try
sem = Semaphore.OpenExisting(semaphoreName, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions)
' Get the current ACL. This requires
' SemaphoreRights.ReadPermissions.
Dim semSec As SemaphoreSecurity = sem.GetAccessControl()
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
' First, the rule that denied the current user
' the right to enter and release the semaphore must
' be removed.
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.RemoveAccessRule(rule)
' Now grant the user the correct rights.
'
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Update the ACL. This requires
' SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec)
Console.WriteLine("Updated semaphore security.")
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), the rights required to
' enter and release the semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unable to change permissions: {0}", _
ex.Message)
Return
End Try
End If
' Enter the semaphore, and hold it until the program
' exits.
'
Try
sem.WaitOne()
Console.WriteLine("Entered the semaphore.")
Console.WriteLine("Press the Enter key to exit.")
Console.ReadLine()
sem.Release()
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", _
ex.Message)
End Try
End Sub
End Class
Poznámky
Zabezpečení řízení přístupu můžete nastavit pouze u Semaphore objektů, které představují pojmenované systémové semaphores.
Uživatel musí mít SemaphoreRights.ChangePermissions práva k volání této metody a semaphore musí být otevřen s právy SemaphoreRights.ChangePermissions .