AccessibleObject.Select(AccessibleSelection) Metoda
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Upraví výběr nebo přesune fokus klávesnice přístupného objektu.
public:
virtual void Select(System::Windows::Forms::AccessibleSelection flags);
public virtual void Select (System.Windows.Forms.AccessibleSelection flags);
abstract member Select : System.Windows.Forms.AccessibleSelection -> unit
override this.Select : System.Windows.Forms.AccessibleSelection -> unit
Public Overridable Sub Select (flags As AccessibleSelection)
Parametry
- flags
- AccessibleSelection
Jedna z AccessibleSelection hodnot.
Výjimky
Výběr nelze provést.
Příklady
Následující příklad ukazuje vytvoření ovládacího prvku grafu podporujícího přístupnost pomocí AccessibleObject tříd a Control.ControlAccessibleObject ke zveřejnění přístupných informací. Ovládací prvek vykreslí dvě křivky spolu s legendou. Třída ChartControlAccessibleObject
, která je odvozena z ControlAccessibleObject
, se používá v CreateAccessibilityInstance metodě k poskytování vlastních přístupných informací pro ovládací prvek grafu. Vzhledem k tomu, že legenda grafu není skutečný Control ovládací prvek, ale je nakreslená ovládacím prvku grafu, nemá žádné předdefinované přístupné informace. Z tohoto důvodu třída přepíše metodu tak, ChartControlAccessibleObject
aby vrátila CurveLegendAccessibleObject
, která představuje přístupné informace pro každou část legendy.GetChild Když aplikace s podporou přístupnosti používá tento ovládací prvek, může ovládací prvek poskytnout potřebné přístupné informace.
Tento kód ukazuje přepsání Select metody . Kompletní příklad kódu najdete v AccessibleObject přehledu třídy.
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public:
ref class CurveLegendAccessibleObject: public AccessibleObject
{
private:
CurveLegend^ curveLegend;
public:
CurveLegendAccessibleObject( CurveLegend^ curveLegend )
: AccessibleObject()
{
this->curveLegend = curveLegend;
}
private:
property ChartControlAccessibleObject^ ChartControl
{
// Private property that helps get the reference to the parent ChartControl.
ChartControlAccessibleObject^ get()
{
return dynamic_cast<ChartControlAccessibleObject^>(Parent);
}
}
internal:
property int ID
{
// Internal helper function that returns the ID for this CurveLegend.
int get()
{
for ( int i = 0; i < ChartControl->GetChildCount(); i++ )
{
if ( ChartControl->GetChild( i ) == this )
{
return i;
}
}
return -1;
}
}
public:
property Rectangle Bounds
{
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
virtual Rectangle get() override
{
// The bounds is in screen coordinates.
Point loc = curveLegend->Location;
return Rectangle(curveLegend->chart->PointToScreen( loc ),curveLegend->Size);
}
}
property String^ Name
{
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
virtual String^ get() override
{
return curveLegend->Name;
}
virtual void set( String^ value ) override
{
curveLegend->Name = value;
}
}
property AccessibleObject^ Parent
{
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
virtual AccessibleObject^ get() override
{
return curveLegend->chart->AccessibilityObject;
}
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the CurveLegend. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::StaticText;
}
}
property AccessibleStates State
{
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
virtual AccessibleStates get() override
{
AccessibleStates state = AccessibleStates::Selectable;
if ( curveLegend->Selected )
{
state = static_cast<AccessibleStates>(state | AccessibleStates::Selected);
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
virtual AccessibleObject^ Navigate( AccessibleNavigation navdir ) override
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl->NavigateFromChild( this, navdir );
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
virtual void Select( AccessibleSelection selection ) override
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl->SelectChild( this, selection );
}
};
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public class CurveLegendAccessibleObject : AccessibleObject
{
private CurveLegend curveLegend;
public CurveLegendAccessibleObject(CurveLegend curveLegend) : base()
{
this.curveLegend = curveLegend;
}
// Private property that helps get the reference to the parent ChartControl.
private ChartControlAccessibleObject ChartControl
{
get {
return Parent as ChartControlAccessibleObject;
}
}
// Internal helper function that returns the ID for this CurveLegend.
internal int ID
{
get {
for(int i = 0; i < ChartControl.GetChildCount(); i++) {
if (ChartControl.GetChild(i) == this) {
return i;
}
}
return -1;
}
}
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
public override Rectangle Bounds
{
get {
// The bounds is in screen coordinates.
Point loc = curveLegend.Location;
return new Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size);
}
}
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
public override string Name
{
get {
return curveLegend.Name;
}
set {
curveLegend.Name = value;
}
}
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
public override AccessibleObject Parent
{
get {
return curveLegend.chart.AccessibilityObject;
}
}
// Gets the role for the CurveLegend. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.StaticText;
}
}
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
public override AccessibleStates State
{
get {
AccessibleStates state = AccessibleStates.Selectable;
if (curveLegend.Selected)
{
state |= AccessibleStates.Selected;
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
public override AccessibleObject Navigate(AccessibleNavigation navdir)
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl.NavigateFromChild(this, navdir);
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
public override void Select(AccessibleSelection selection)
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl.SelectChild(this, selection);
}
}
' Inner class CurveLegendAccessibleObject represents accessible information
' associated with the CurveLegend object.
Public Class CurveLegendAccessibleObject
Inherits AccessibleObject
Private curveLegend As CurveLegend
Public Sub New(curveLegend As CurveLegend)
Me.curveLegend = curveLegend
End Sub
' Private property that helps get the reference to the parent ChartControl.
Private ReadOnly Property ChartControl() As ChartControlAccessibleObject
Get
Return CType(Parent, ChartControlAccessibleObject)
End Get
End Property
' Friend helper function that returns the ID for this CurveLegend.
Friend ReadOnly Property ID() As Integer
Get
Dim i As Integer
For i = 0 To (ChartControl.GetChildCount()) - 1
If ChartControl.GetChild(i) Is Me Then
Return i
End If
Next i
Return - 1
End Get
End Property
' Gets the Bounds for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Bounds() As Rectangle
Get
' The bounds is in screen coordinates.
Dim loc As Point = curveLegend.Location
Return New Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size)
End Get
End Property
' Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
Public Overrides Property Name() As String
Get
Return curveLegend.Name
End Get
Set
curveLegend.Name = value
End Set
End Property
' Gets the Curve Legend Parent's Accessible object.
' This is used by accessibility programs.
Public Overrides ReadOnly Property Parent() As AccessibleObject
Get
Return curveLegend.chart.AccessibilityObject
End Get
End Property
' Gets the role for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.StaticText
End Get
End Property
' Gets the state based on the selection for the CurveLegend.
' This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Dim stateTemp As AccessibleStates = AccessibleStates.Selectable
If curveLegend.Selected Then
stateTemp = stateTemp Or AccessibleStates.Selected
End If
Return stateTemp
End Get
End Property
' Navigates through siblings of this CurveLegend. This is used by accessibility programs.
Public Overrides Function Navigate(navdir As AccessibleNavigation) As AccessibleObject
' Use the Friend NavigateFromChild helper function that exists
' on ChartControlAccessibleObject.
Return ChartControl.NavigateFromChild(Me, navdir)
End Function
' Selects or unselects this CurveLegend. This is used by accessibility programs.
Public Overrides Sub [Select](selection As AccessibleSelection)
' Use the internal SelectChild helper function that exists
' on ChartControlAccessibleObject.
ChartControl.SelectChild(Me, selection)
End Sub
End Class
Poznámky
Aplikace mohou tuto metodu použít k provádění složitých operací výběru.
Následující článek popisuje, které AccessibleSelection hodnoty se mají zadat při volání Select za účelem provádění složitých operací výběru.
Operace | Kombinace příznaků |
---|---|
Simulace kliknutí | AccessibleSelection.TakeFocusOR AccessibleSelection.TakeSelectionPoznámka: Tato kombinace nevybere požadovaný ovládací prvek, pokud je volána z vaší vlastní aplikace. Pokud je však volána z externí aplikace, bude mít požadovaný účinek. |
Výběr cílové položky simulací stisknutou klávesou CTRL a kliknutím | AccessibleSelection.TakeFocus OR AccessibleSelection.AddSelection |
Zrušení výběru cílové položky simulací klávesy CTRL + kliknutí | AccessibleSelection.TakeFocus OR AccessibleSelection.RemoveSelection |
Simulace shift + kliknutí | AccessibleSelection.TakeFocus OR AccessibleSelection.ExtendSelection |
Výběr rozsahu objektů a umístění fokusu na poslední objekt | Zadáním AccessibleSelection.TakeFocus u počátečního objektu nastavíte ukotvení výběru. Potom zavolejte Select znovu a zadejte AccessibleSelection.TakeFocusOR AccessibleSelection.ExtendSelection u posledního objektu. |
Zrušení výběru všech objektů | Zadejte AccessibleSelection.TakeSelection u libovolného objektu. Tento příznak zruší výběr všech vybraných objektů s výjimkou právě vybraného objektu. Pak zavolejte Select znovu a zadejte AccessibleSelection.RemoveSelection pro stejný objekt. |
Poznámky pro dědice
Tuto metodu musí podporovat všechny objekty, které lze vybrat nebo získat fokus klávesnice.
Platí pro
Váš názor
https://aka.ms/ContentUserFeedback.
Připravujeme: V průběhu roku 2024 budeme postupně vyřazovat problémy z GitHub coby mechanismus zpětné vazby pro obsah a nahrazovat ho novým systémem zpětné vazby. Další informace naleznete v tématu:Odeslat a zobrazit názory pro