AccessibleObject Třída
Definice
Důležité
Některé informace platí pro předběžně vydaný produkt, který se může zásadně změnit, než ho výrobce nebo autor vydá. Microsoft neposkytuje žádné záruky, výslovné ani předpokládané, týkající se zde uváděných informací.
Poskytuje informace, které aplikace pro usnadnění přístupu používají k úpravě uživatelského rozhraní aplikace pro uživatele s postižením.
public ref class AccessibleObject : MarshalByRefObject, Accessibility::IAccessible, System::Reflection::IReflectpublic ref class AccessibleObject : System::Runtime::InteropServices::StandardOleMarshalObject, Accessibility::IAccessible, System::Reflection::IReflect[System.Runtime.InteropServices.ComVisible(true)]
public class AccessibleObject : MarshalByRefObject, Accessibility.IAccessible, System.Reflection.IReflect[System.Runtime.InteropServices.ComVisible(true)]
public class AccessibleObject : System.Runtime.InteropServices.StandardOleMarshalObject, Accessibility.IAccessible, System.Reflection.IReflectpublic class AccessibleObject : System.Runtime.InteropServices.StandardOleMarshalObject, Accessibility.IAccessible, System.Reflection.IReflect[<System.Runtime.InteropServices.ComVisible(true)>]
type AccessibleObject = class
inherit MarshalByRefObject
interface IReflect
interface IAccessible
interface UnsafeNativeMethods.IEnumVariant
interface UnsafeNativeMethods.IMarshal[<System.Runtime.InteropServices.ComVisible(true)>]
type AccessibleObject = class
inherit StandardOleMarshalObject
interface IReflect
interface IAccessible
interface UnsafeNativeMethods.IEnumVariant
interface UnsafeNativeMethods.IOleWindow[<System.Runtime.InteropServices.ComVisible(true)>]
type AccessibleObject = class
inherit StandardOleMarshalObject
interface IReflect
interface IAccessible[<System.Runtime.InteropServices.ComVisible(true)>]
type AccessibleObject = class
inherit StandardOleMarshalObject
interface IReflect
interface IAccessible
interface UnsafeNativeMethods.IAccessibleEx
interface UnsafeNativeMethods.IServiceProvider
interface UnsafeNativeMethods.IRawElementProviderSimple
interface UnsafeNativeMethods.IRawElementProviderFragment
interface UnsafeNativeMethods.IRawElementProviderFragmentRoot
interface UnsafeNativeMethods.IInvokeProvider
interface UnsafeNativeMethods.IValueProvider
interface UnsafeNativeMethods.IRangeValueProvider
interface UnsafeNativeMethods.IExpandCollapseProvider
interface UnsafeNativeMethods.IToggleProvider
interface UnsafeNativeMethods.ITableProvider
interface UnsafeNativeMethods.ITableItemProvider
interface UnsafeNativeMethods.IGridProvider
interface UnsafeNativeMethods.IGridItemProvider
interface UnsafeNativeMethods.IEnumVariant
interface UnsafeNativeMethods.IOleWindow
interface UnsafeNativeMethods.ILegacyIAccessibleProvider
interface UnsafeNativeMethods.ISelectionProvider
interface UnsafeNativeMethods.ISelectionItemProvider
interface UnsafeNativeMethods.IRawElementProviderHwndOverride
interface UnsafeNativeMethods.IScrollItemProvidertype AccessibleObject = class
inherit StandardOleMarshalObject
interface IReflect
interface IAccessible
interface Interop.UiaCore.IAccessibleEx
interface Interop.Ole32.IServiceProvider
interface Interop.UiaCore.IRawElementProviderSimple
interface Interop.UiaCore.IRawElementProviderFragment
interface Interop.UiaCore.IRawElementProviderFragmentRoot
interface Interop.UiaCore.IInvokeProvider
interface Interop.UiaCore.IValueProvider
interface Interop.UiaCore.IRangeValueProvider
interface Interop.UiaCore.IExpandCollapseProvider
interface Interop.UiaCore.IToggleProvider
interface Interop.UiaCore.ITableProvider
interface Interop.UiaCore.ITableItemProvider
interface Interop.UiaCore.IGridProvider
interface Interop.UiaCore.IGridItemProvider
interface Interop.Oleaut32.IEnumVariant
interface Interop.Ole32.IOleWindow
interface Interop.UiaCore.ILegacyIAccessibleProvider
interface Interop.UiaCore.ISelectionProvider
interface Interop.UiaCore.ISelectionItemProvider
interface Interop.UiaCore.IRawElementProviderHwndOverride
interface Interop.UiaCore.IScrollItemProvider
interface Interop.UiaCore.IMultipleViewProvider
interface Interop.UiaCore.ITextProvider
interface Interop.UiaCore.ITextProvider2Public Class AccessibleObject
Inherits MarshalByRefObject
Implements IAccessible, IReflectPublic Class AccessibleObject
Inherits StandardOleMarshalObject
Implements IAccessible, IReflect- Dědičnost
- Dědičnost
- Odvozené
- Atributy
- Implementuje
Příklady
Následující příklad kódu ukazuje vytvoření ovládacího prvku grafu s podporou přístupnosti pomocí tříd AccessibleObject a Control.ControlAccessibleObject zpřístupnění přístupných informací. Ovládací prvek vykreslují dvě křivky spolu s legendou. Třída ChartControlAccessibleObject , která je odvozena od ControlAccessibleObject, se používá v CreateAccessibilityInstance metodě k poskytnutí vlastních přístupných informací pro ovládací prvek grafu. Vzhledem k tomu, že legenda grafu není skutečný Control ovládací prvek založený na základech, ale je nakreslený ovládacím prvku grafu, neobsahuje žádné předdefinované přístupné informace. Z tohoto důvodu třída přepíše metodu tak, ChartControlAccessibleObject aby vrátila CurveLegendAccessibleObject přístupné informace pro každou část legendy.GetChild Pokud aplikace pracující s podporou přístupnosti používá tento ovládací prvek, může ovládací prvek poskytnout potřebné přístupné informace.
#using <Accessibility.dll>
#using <System.dll>
#using <System.Windows.Forms.dll>
#using <System.Drawing.dll>
using namespace System;
using namespace System::Drawing;
using namespace System::Windows::Forms;
// Declare a chart control that demonstrates accessibility in Windows Forms.
public ref class ChartControl: public System::Windows::Forms::UserControl
{
public:
ref class ChartControlAccessibleObject;
// forward declaration
// Inner Class that represents a legend for a curve in the chart.
ref class CurveLegend
{
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public:
ref class CurveLegendAccessibleObject: public AccessibleObject
{
private:
CurveLegend^ curveLegend;
public:
CurveLegendAccessibleObject( CurveLegend^ curveLegend )
: AccessibleObject()
{
this->curveLegend = curveLegend;
}
private:
property ChartControlAccessibleObject^ ChartControl
{
// Private property that helps get the reference to the parent ChartControl.
ChartControlAccessibleObject^ get()
{
return dynamic_cast<ChartControlAccessibleObject^>(Parent);
}
}
internal:
property int ID
{
// Internal helper function that returns the ID for this CurveLegend.
int get()
{
for ( int i = 0; i < ChartControl->GetChildCount(); i++ )
{
if ( ChartControl->GetChild( i ) == this )
{
return i;
}
}
return -1;
}
}
public:
property Rectangle Bounds
{
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
virtual Rectangle get() override
{
// The bounds is in screen coordinates.
Point loc = curveLegend->Location;
return Rectangle(curveLegend->chart->PointToScreen( loc ),curveLegend->Size);
}
}
property String^ Name
{
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
virtual String^ get() override
{
return curveLegend->Name;
}
virtual void set( String^ value ) override
{
curveLegend->Name = value;
}
}
property AccessibleObject^ Parent
{
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
virtual AccessibleObject^ get() override
{
return curveLegend->chart->AccessibilityObject;
}
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the CurveLegend. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::StaticText;
}
}
property AccessibleStates State
{
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
virtual AccessibleStates get() override
{
AccessibleStates state = AccessibleStates::Selectable;
if ( curveLegend->Selected )
{
state = static_cast<AccessibleStates>(state | AccessibleStates::Selected);
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
virtual AccessibleObject^ Navigate( AccessibleNavigation navdir ) override
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl->NavigateFromChild( this, navdir );
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
virtual void Select( AccessibleSelection selection ) override
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl->SelectChild( this, selection );
}
};
private:
// class CurveLgendAccessibleObject
String^ name;
ChartControl^ chart;
CurveLegendAccessibleObject^ accObj;
bool selected;
Point location;
public:
CurveLegend( ChartControl^ chart, String^ name )
{
this->chart = chart;
this->name = name;
selected = true;
}
property AccessibleObject^ AccessibilityObject
{
// Gets the accessibility object for the curve legend.
AccessibleObject^ get()
{
if ( accObj == nullptr )
{
accObj = gcnew CurveLegendAccessibleObject( this );
}
return accObj;
}
}
property Rectangle Bounds
{
// Gets the bounds for the curve legend.
Rectangle get()
{
return Rectangle(Location,Size);
}
}
property Point Location
{
// Gets or sets the location for the curve legend.
Point get()
{
return location;
}
void set( Point value )
{
location = value;
chart->Invalidate();
// Notifies the chart of the location change. This is used for
// the accessibility information. AccessibleEvents::LocationChange
// tells the chart the reason for the notification.
chart->AccessibilityNotifyClients( AccessibleEvents::LocationChange, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
}
}
property String^ Name
{
// Gets or sets the Name for the curve legend.
String^ get()
{
return name;
}
void set( String^ value )
{
if ( name != value )
{
name = value;
chart->Invalidate();
// Notifies the chart of the name change. This is used for
// the accessibility information. AccessibleEvents::NameChange
// tells the chart the reason for the notification.
chart->AccessibilityNotifyClients( AccessibleEvents::NameChange, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
}
}
}
property bool Selected
{
// Gets or sets the Selected state for the curve legend.
bool get()
{
return selected;
}
void set( bool value )
{
if ( selected != value )
{
selected = value;
chart->Invalidate();
// Notifies the chart of the selection value change. This is used for
// the accessibility information. The AccessibleEvents value depends upon
// if the selection is true (AccessibleEvents::SelectionAdd) or
// false (AccessibleEvents::SelectionRemove).
chart->AccessibilityNotifyClients( selected ? AccessibleEvents::SelectionAdd : AccessibleEvents::SelectionRemove, (dynamic_cast<CurveLegendAccessibleObject^>(AccessibilityObject))->ID );
}
}
}
property System::Drawing::Size Size
{
// Gets the Size for the curve legend.
System::Drawing::Size get()
{
int legendHeight = chart->Font->Height + 4;
Graphics^ g = chart->CreateGraphics();
int legendWidth = (int)g->MeasureString( Name, chart->Font ).Width + 4;
return System::Drawing::Size( legendWidth, legendHeight );
}
}
};
private:
// class CurveLegend
CurveLegend^ legend1;
CurveLegend^ legend2;
public:
ChartControl()
{
// The ChartControl draws the chart in the OnPaint .
SetStyle( ControlStyles::ResizeRedraw, true );
SetStyle( ControlStyles::DoubleBuffer, true );
SetStyle( ControlStyles::AllPaintingInWmPaint, true );
this->BackColor = System::Drawing::Color::White;
this->Name = "ChartControl";
this->Click += gcnew System::EventHandler( this, &ChartControl::ChartControl_Click );
this->QueryAccessibilityHelp += gcnew System::Windows::Forms::QueryAccessibilityHelpEventHandler( this, &ChartControl::ChartControl_QueryAccessibilityHelp );
// The CurveLengend is not Control-based, it just
// represents the parts of the legend.
legend1 = gcnew CurveLegend( this,"A" );
legend1->Location = Point(20,30);
legend2 = gcnew CurveLegend( this,"B" );
legend2->Location = Point(20,50);
}
protected:
// Overridden to return the custom AccessibleObject
// for the entire chart.
virtual AccessibleObject^ CreateAccessibilityInstance() override
{
return gcnew ChartControlAccessibleObject( this );
}
virtual void OnPaint( PaintEventArgs^ e ) override
{
// The ChartControl draws the chart in the OnPaint .
System::Windows::Forms::UserControl::OnPaint( e );
Rectangle bounds = this->ClientRectangle;
int border = 5;
// Draws the legends first.
StringFormat^ format = gcnew StringFormat;
format->Alignment = StringAlignment::Center;
format->LineAlignment = StringAlignment::Center;
if ( legend1 != nullptr )
{
if ( legend1->Selected )
{
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Blue ), legend1->Bounds );
}
else
{
e->Graphics->DrawRectangle( Pens::Blue, legend1->Bounds );
}
e->Graphics->DrawString( legend1->Name, this->Font, Brushes::Black, legend1->Bounds, format );
}
if ( legend2 != nullptr )
{
if ( legend2->Selected )
{
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Red ), legend2->Bounds );
}
else
{
e->Graphics->DrawRectangle( Pens::Red, legend2->Bounds );
}
e->Graphics->DrawString( legend2->Name, this->Font, Brushes::Black, legend2->Bounds, format );
}
// Charts out the actual curves that represent data in the Chart.
bounds.Inflate( -border, -border );
array<Point>^ temp1 = {Point(bounds.Left,bounds.Bottom),Point(bounds.Left + bounds.Width / 3,bounds.Top + bounds.Height / 5),Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2),Point(bounds.Right,bounds.Top)};
array<Point>^curve1 = temp1;
array<Point>^ temp2 = {Point(bounds.Left,bounds.Bottom - bounds.Height / 3),Point(bounds.Left + bounds.Width / 3,bounds.Top + bounds.Height / 5),Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2),Point(bounds.Right,bounds.Top + bounds.Height / 2)};
array<Point>^curve2 = temp2;
// Draws the actual curve only if it is selected.
if ( legend1->Selected )
e->Graphics->DrawCurve( Pens::Blue, curve1 );
if ( legend2->Selected )
e->Graphics->DrawCurve( Pens::Red, curve2 );
e->Graphics->DrawRectangle( Pens::Blue, bounds );
}
// Handles the QueryAccessibilityHelp event.
void ChartControl_QueryAccessibilityHelp( Object^ /*sender*/, System::Windows::Forms::QueryAccessibilityHelpEventArgs^ e )
{
e->HelpString = "Displays chart data";
}
// Handles the Click event for the chart.
// Toggles the selection of whatever legend was clicked on
void ChartControl_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
{
Point pt = this->PointToClient( Control::MousePosition );
if ( legend1->Bounds.Contains( pt ) )
{
legend1->Selected = !legend1->Selected;
}
else
if ( legend2->Bounds.Contains( pt ) )
{
legend2->Selected = !legend2->Selected;
}
}
public:
property array<CurveLegend^>^ Legends
{
// Gets an array of CurveLengends used in the Chart.
array<CurveLegend^>^ get()
{
array<CurveLegend^>^temp3 = {legend1,legend2};
return temp3;
}
}
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
ref class ChartControlAccessibleObject: public ControlAccessibleObject
{
private:
ChartControl^ chartControl;
public:
ChartControlAccessibleObject( ChartControl^ ctrl )
: ControlAccessibleObject( ctrl )
{
chartControl = ctrl;
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the Chart. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::Chart;
}
}
property AccessibleStates State
{
// Gets the state for the Chart. This is used by accessibility programs.
virtual AccessibleStates get() override
{
return AccessibleStates::ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
virtual int GetChildCount() override
{
return chartControl->Legends->Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
virtual AccessibleObject^ GetChild( int index ) override
{
if ( index >= 0 && index < chartControl->Legends->Length )
{
return chartControl->Legends[ index ]->AccessibilityObject;
}
return nullptr;
}
internal:
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend::CurveLegendAccessibleObject.Navigate function.
AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
{
switch ( navdir )
{
case AccessibleNavigation::Down:
case AccessibleNavigation::Next:
return GetChild( child->ID + 1 );
case AccessibleNavigation::Up:
case AccessibleNavigation::Previous:
return GetChild( child->ID - 1 );
}
return nullptr;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend::CurveLegendAccessibleObject.Select function.
void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
{
int childID = child->ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
{
for ( int i = 0; i < chartControl->Legends->Length; i++ )
{
if ( i == childID )
{
chartControl->Legends[ i ]->Selected = true;
}
else
{
chartControl->Legends[ i ]->Selected = false;
}
}
// AccessibleSelection->AddSelection means that the CurveLegend will be selected.
if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = true;
}
// AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = false;
}
}
}
};
// class ChartControlAccessibleObject
};
// class ChartControl
public ref class Form1: public System::Windows::Forms::Form
{
private:
// Test out the Chart Control.
ChartControl^ chart1;
public:
Form1()
{
// Create a chart control and add it to the form.
this->chart1 = gcnew ChartControl;
this->ClientSize = System::Drawing::Size( 920, 566 );
this->chart1->Location = System::Drawing::Point( 47, 16 );
this->chart1->Size = System::Drawing::Size( 600, 400 );
this->Controls->Add( this->chart1 );
}
};
// class Form1
[STAThread]
int main()
{
Application::Run( gcnew Form1 );
}
using System;
using System.Drawing;
using System.Windows.Forms;
namespace ChartControl
{
public class Form1 : System.Windows.Forms.Form
{
// Test out the Chart Control.
private ChartControl chart1;
[STAThread]
static void Main()
{
Application.Run(new Form1());
}
public Form1() {
// Create a chart control and add it to the form.
this.chart1 = new ChartControl();
this.ClientSize = new System.Drawing.Size(920, 566);
this.chart1.Location = new System.Drawing.Point(47, 16);
this.chart1.Size = new System.Drawing.Size(600, 400);
this.Controls.Add(this.chart1);
}
}
// Declare a chart control that demonstrates accessibility in Windows Forms.
public class ChartControl : System.Windows.Forms.UserControl
{
private CurveLegend legend1;
private CurveLegend legend2;
public ChartControl()
{
// The ChartControl draws the chart in the OnPaint override.
SetStyle(ControlStyles.ResizeRedraw, true);
SetStyle(ControlStyles.DoubleBuffer, true);
SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.BackColor = System.Drawing.Color.White;
this.Name = "ChartControl";
this.Click += new System.EventHandler(this.ChartControl_Click);
this.QueryAccessibilityHelp +=
new System.Windows.Forms.QueryAccessibilityHelpEventHandler(
this.ChartControl_QueryAccessibilityHelp);
// The CurveLengend is not Control-based, it just
// represents the parts of the legend.
legend1 = new CurveLegend(this, "A");
legend1.Location = new Point(20, 30);
legend2 = new CurveLegend(this, "B");
legend2.Location = new Point(20, 50);
}
// Overridden to return the custom AccessibleObject
// for the entire chart.
protected override AccessibleObject CreateAccessibilityInstance()
{
return new ChartControlAccessibleObject(this);
}
protected override void OnPaint(PaintEventArgs e)
{
// The ChartControl draws the chart in the OnPaint override.
base.OnPaint(e);
Rectangle bounds = this.ClientRectangle;
int border = 5;
// Draws the legends first.
StringFormat format = new StringFormat();
format.Alignment = StringAlignment.Center;
format.LineAlignment = StringAlignment.Center;
if (legend1 != null) {
if (legend1.Selected) {
e.Graphics.FillRectangle(new SolidBrush(Color.Blue), legend1.Bounds);
} else {
e.Graphics.DrawRectangle(Pens.Blue, legend1.Bounds);
}
e.Graphics.DrawString(legend1.Name, this.Font, Brushes.Black, legend1.Bounds, format);
}
if (legend2 != null) {
if (legend2.Selected) {
e.Graphics.FillRectangle(new SolidBrush(Color.Red), legend2.Bounds);
} else {
e.Graphics.DrawRectangle(Pens.Red, legend2.Bounds);
}
e.Graphics.DrawString(legend2.Name, this.Font, Brushes.Black, legend2.Bounds, format);
}
// Charts out the actual curves that represent data in the Chart.
bounds.Inflate(-border, -border);
Point[] curve1 = new Point[] {new Point(bounds.Left, bounds.Bottom),
new Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5),
new Point(bounds.Right - bounds.Width / 3, (bounds.Top + bounds.Bottom) / 2),
new Point(bounds.Right, bounds.Top)};
Point[] curve2 = new Point[] {new Point(bounds.Left, bounds.Bottom - bounds.Height / 3),
new Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5),
new Point(bounds.Right - bounds.Width / 3, (bounds.Top + bounds.Bottom) / 2),
new Point(bounds.Right, bounds.Top + bounds.Height / 2)};
// Draws the actual curve only if it is selected.
if (legend1.Selected) e.Graphics.DrawCurve(Pens.Blue, curve1);
if (legend2.Selected) e.Graphics.DrawCurve(Pens.Red, curve2);
e.Graphics.DrawRectangle(Pens.Blue, bounds);
}
// Handles the QueryAccessibilityHelp event.
private void ChartControl_QueryAccessibilityHelp(object sender,
System.Windows.Forms.QueryAccessibilityHelpEventArgs e)
{
e.HelpString = "Displays chart data";
}
// Handles the Click event for the chart.
// Toggles the selection of whatever legend was clicked on
private void ChartControl_Click(object sender, System.EventArgs e)
{
Point pt = this.PointToClient(Control.MousePosition);
if (legend1.Bounds.Contains(pt)) {
legend1.Selected = !legend1.Selected;
} else if (legend2.Bounds.Contains(pt)) {
legend2.Selected = !legend2.Selected;
}
}
// Gets an array of CurveLengends used in the Chart.
public CurveLegend[] Legends
{
get {
return new CurveLegend[] { legend1, legend2 };
}
}
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
public class ChartControlAccessibleObject : ControlAccessibleObject
{
ChartControl chartControl;
public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl)
{
chartControl = ctrl;
}
// Gets the role for the Chart. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.Chart;
}
}
// Gets the state for the Chart. This is used by accessibility programs.
public override AccessibleStates State
{
get {
return AccessibleStates.ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
public override int GetChildCount()
{
return chartControl.Legends.Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
public override AccessibleObject GetChild(int index)
{
if (index >= 0 && index < chartControl.Legends.Length) {
return chartControl.Legends[index].AccessibilityObject;
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend.CurveLegendAccessibleObject.Navigate function.
internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child,
AccessibleNavigation navdir)
{
switch(navdir) {
case AccessibleNavigation.Down:
case AccessibleNavigation.Next:
return GetChild(child.ID + 1);
case AccessibleNavigation.Up:
case AccessibleNavigation.Previous:
return GetChild(child.ID - 1);
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend.CurveLegendAccessibleObject.Select function.
internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection)
{
int childID = child.ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ((selection & AccessibleSelection.TakeSelection) != 0) {
for(int i = 0; i < chartControl.Legends.Length; i++) {
if (i == childID) {
chartControl.Legends[i].Selected = true;
} else {
chartControl.Legends[i].Selected = false;
}
}
// AccessibleSelection.AddSelection means that the CurveLegend will be selected.
if ((selection & AccessibleSelection.AddSelection) != 0) {
chartControl.Legends[childID].Selected = true;
}
// AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
if ((selection & AccessibleSelection.RemoveSelection) != 0) {
chartControl.Legends[childID].Selected = false;
}
}
}
}
// Inner Class that represents a legend for a curve in the chart.
public class CurveLegend
{
private string name;
private ChartControl chart;
private CurveLegendAccessibleObject accObj;
private bool selected = true;
private Point location;
public CurveLegend(ChartControl chart, string name)
{
this.chart = chart;
this.name = name;
}
// Gets the accessibility object for the curve legend.
public AccessibleObject AccessibilityObject
{
get
{
accObj ??= new CurveLegendAccessibleObject(this);
return accObj;
}
}
// Gets the bounds for the curve legend.
public Rectangle Bounds
{
get
{
return new Rectangle(Location, Size);
}
}
// Gets or sets the location for the curve legend.
public Point Location
{
get {
return location;
}
set {
location = value;
chart.Invalidate();
// Notifies the chart of the location change. This is used for
// the accessibility information. AccessibleEvents.LocationChange
// tells the chart the reason for the notification.
chart.AccessibilityNotifyClients(AccessibleEvents.LocationChange,
((CurveLegendAccessibleObject)AccessibilityObject).ID);
}
}
// Gets or sets the Name for the curve legend.
public string Name
{
get {
return name;
}
set {
if (name != value)
{
name = value;
chart.Invalidate();
// Notifies the chart of the name change. This is used for
// the accessibility information. AccessibleEvents.NameChange
// tells the chart the reason for the notification.
chart.AccessibilityNotifyClients(AccessibleEvents.NameChange,
((CurveLegendAccessibleObject)AccessibilityObject).ID);
}
}
}
// Gets or sets the Selected state for the curve legend.
public bool Selected
{
get {
return selected;
}
set {
if (selected != value)
{
selected = value;
chart.Invalidate();
// Notifies the chart of the selection value change. This is used for
// the accessibility information. The AccessibleEvents value depends upon
// if the selection is true (AccessibleEvents.SelectionAdd) or
// false (AccessibleEvents.SelectionRemove).
chart.AccessibilityNotifyClients(
selected ? AccessibleEvents.SelectionAdd : AccessibleEvents.SelectionRemove,
((CurveLegendAccessibleObject)AccessibilityObject).ID);
}
}
}
// Gets the Size for the curve legend.
public Size Size
{
get {
int legendHeight = chart.Font.Height + 4;
Graphics g = chart.CreateGraphics();
int legendWidth = (int)g.MeasureString(Name, chart.Font).Width + 4;
return new Size(legendWidth, legendHeight);
}
}
// Inner class CurveLegendAccessibleObject represents accessible information
// associated with the CurveLegend object.
public class CurveLegendAccessibleObject : AccessibleObject
{
private CurveLegend curveLegend;
public CurveLegendAccessibleObject(CurveLegend curveLegend) : base()
{
this.curveLegend = curveLegend;
}
// Private property that helps get the reference to the parent ChartControl.
private ChartControlAccessibleObject ChartControl
{
get {
return Parent as ChartControlAccessibleObject;
}
}
// Internal helper function that returns the ID for this CurveLegend.
internal int ID
{
get {
for(int i = 0; i < ChartControl.GetChildCount(); i++) {
if (ChartControl.GetChild(i) == this) {
return i;
}
}
return -1;
}
}
// Gets the Bounds for the CurveLegend. This is used by accessibility programs.
public override Rectangle Bounds
{
get {
// The bounds is in screen coordinates.
Point loc = curveLegend.Location;
return new Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size);
}
}
// Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
public override string Name
{
get {
return curveLegend.Name;
}
set {
curveLegend.Name = value;
}
}
// Gets the Curve Legend Parent's Accessible object.
// This is used by accessibility programs.
public override AccessibleObject Parent
{
get {
return curveLegend.chart.AccessibilityObject;
}
}
// Gets the role for the CurveLegend. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.StaticText;
}
}
// Gets the state based on the selection for the CurveLegend.
// This is used by accessibility programs.
public override AccessibleStates State
{
get {
AccessibleStates state = AccessibleStates.Selectable;
if (curveLegend.Selected)
{
state |= AccessibleStates.Selected;
}
return state;
}
}
// Navigates through siblings of this CurveLegend. This is used by accessibility programs.
public override AccessibleObject Navigate(AccessibleNavigation navdir)
{
// Uses the internal NavigateFromChild helper function that exists
// on ChartControlAccessibleObject.
return ChartControl.NavigateFromChild(this, navdir);
}
// Selects or unselects this CurveLegend. This is used by accessibility programs.
public override void Select(AccessibleSelection selection)
{
// Uses the internal SelectChild helper function that exists
// on ChartControlAccessibleObject.
ChartControl.SelectChild(this, selection);
}
}
}
}
}
Option Explicit
Imports System.Drawing
Imports System.Windows.Forms
Namespace ChartControlNameSpace
Public Class Form1
Inherits System.Windows.Forms.Form
' Test out the Chart Control.
Private chart1 As ChartControl
<System.STAThread()> _
Public Shared Sub Main()
System.Windows.Forms.Application.Run(New Form1())
End Sub
Public Sub New()
' Create a chart control and add it to the form.
Me.chart1 = New ChartControl()
Me.ClientSize = New System.Drawing.Size(920, 566)
Me.chart1.Location = New System.Drawing.Point(47, 16)
Me.chart1.Size = New System.Drawing.Size(600, 400)
Me.Controls.Add(Me.chart1)
End Sub
End Class
' Declares a chart control that demonstrates Accessibility in Windows Forms.
Public Class ChartControl
Inherits System.Windows.Forms.UserControl
Private legend1 As CurveLegend
Private legend2 As CurveLegend
Public Sub New()
' The ChartControl draws the chart in the OnPaint override.
SetStyle(ControlStyles.ResizeRedraw, True)
SetStyle(ControlStyles.DoubleBuffer, True)
SetStyle(ControlStyles.AllPaintingInWmPaint, True)
Me.BackColor = System.Drawing.Color.White
Me.Name = "ChartControl"
' The CurveLengend is not Control-based, it just
' represent the parts of the legend.
legend1 = New CurveLegend(Me, "A")
legend1.Location = New Point(20, 30)
legend2 = New CurveLegend(Me, "B")
legend2.Location = New Point(20, 50)
End Sub
' Overridden to return the custom AccessibleObject
' for the entire chart.
Protected Overrides Function CreateAccessibilityInstance() As AccessibleObject
Return New ChartControlAccessibleObject(Me)
End Function
Protected Overrides Sub OnPaint(e As PaintEventArgs)
' The ChartControl draws the chart in the OnPaint override.
MyBase.OnPaint(e)
Dim bounds As Rectangle = Me.ClientRectangle
Dim border As Integer = 5
' Draw the legends first.
Dim format As New StringFormat()
format.Alignment = StringAlignment.Center
format.LineAlignment = StringAlignment.Center
If (legend1 IsNot Nothing) Then
If legend1.Selected Then
e.Graphics.FillRectangle(New SolidBrush(Color.Blue), legend1.Bounds)
Else
e.Graphics.DrawRectangle(Pens.Blue, legend1.Bounds)
End If
e.Graphics.DrawString(legend1.Name, Me.Font, Brushes.Black, RectangleF.op_Implicit(legend1.Bounds), format)
End If
If (legend2 IsNot Nothing) Then
If legend2.Selected Then
e.Graphics.FillRectangle(New SolidBrush(Color.Red), legend2.Bounds)
Else
e.Graphics.DrawRectangle(Pens.Red, legend2.Bounds)
End If
e.Graphics.DrawString(legend2.Name, Me.Font, Brushes.Black, RectangleF.op_Implicit(legend2.Bounds), format)
End If
' Chart out the actual curves that represent data in the Chart.
bounds.Inflate(-border, -border)
Dim curve1() As Point = {New Point(bounds.Left, bounds.Bottom), _
New Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5), _
New Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2), _
New Point(bounds.Right, bounds.Top)}
Dim curve2() As Point = {New Point(bounds.Left, bounds.Bottom - bounds.Height / 3), _
New Point(bounds.Left + bounds.Width / 3, bounds.Top + bounds.Height / 5), _
New Point(bounds.Right - bounds.Width / 3,(bounds.Top + bounds.Bottom) / 2), _
New Point(bounds.Right, bounds.Top + bounds.Height / 2)}
' Draw the actual curve only if it is selected.
If legend1.Selected Then
e.Graphics.DrawCurve(Pens.Blue, curve1)
End If
If legend2.Selected Then
e.Graphics.DrawCurve(Pens.Red, curve2)
End If
e.Graphics.DrawRectangle(Pens.Blue, bounds)
End Sub
' Handle the QueryAccessibilityHelp event.
Private Sub ChartControl_QueryAccessibilityHelp(sender As Object, _
e As System.Windows.Forms.QueryAccessibilityHelpEventArgs) Handles MyBase.QueryAccessibilityHelp
e.HelpString = "Displays chart data"
End Sub
' Handle the Click event for the chart.
' Toggle the selection of whatever legend was clicked.
Private Sub ChartControl_Click(sender As Object, e As System.EventArgs) Handles MyBase.Click
Dim pt As Point = Me.PointToClient(Control.MousePosition)
If legend1.Bounds.Contains(pt) Then
legend1.Selected = Not legend1.Selected
Else
If legend2.Bounds.Contains(pt) Then
legend2.Selected = Not legend2.Selected
End If
End If
End Sub
' Get an array of the CurveLengends used in the Chart.
Public ReadOnly Property Legends() As CurveLegend()
Get
Return New CurveLegend() {legend1, legend2}
End Get
End Property
Protected Sub ExposeAccessibilityNotifyClients(ByVal accEvent As AccessibleEvents, ByVal childID As Integer)
AccessibilityNotifyClients(accEvent, childID)
End Sub
' Inner Class ChartControlAccessibleObject represents accessible information
' associated with the ChartControl.
' The ChartControlAccessibleObject is returned in the ' ChartControl.CreateAccessibilityInstance override.
Public Class ChartControlAccessibleObject
Inherits Control.ControlAccessibleObject
Private chartControl As ChartControl
Public Sub New(ctrl As ChartControl)
MyBase.New(ctrl)
chartControl = ctrl
End Sub
' Get the role for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.Chart
End Get
End Property
' Get the state for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Return AccessibleStates.ReadOnly
End Get
End Property
' The CurveLegend objects are "child" controls in terms of accessibility so
' return the number of ChartLengend objects.
Public Overrides Function GetChildCount() As Integer
Return chartControl.Legends.Length
End Function
' Get the Accessibility object of the child CurveLegend idetified by index.
Public Overrides Function GetChild(index As Integer) As AccessibleObject
If index >= 0 And index < chartControl.Legends.Length Then
Return chartControl.Legends(index).AccessibilityObject
End If
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to navigate between sibiling controls. Specifically, this function is used in
' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
navdir As AccessibleNavigation) As AccessibleObject
Select Case navdir
Case AccessibleNavigation.Down, AccessibleNavigation.Next
Return GetChild(child.ID + 1)
Case AccessibleNavigation.Up, AccessibleNavigation.Previous
Return GetChild(child.ID - 1)
End Select
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to select a specific CurveLegend control. Specifically, this function is used
' in the CurveLegend.CurveLegendAccessibleObject.Select function.
Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
Dim childID As Integer = child.ID
' Determine which selection action should occur, based on the
' AccessibleSelection value.
If (selection And AccessibleSelection.TakeSelection) <> 0 Then
Dim i As Integer
For i = 0 To chartControl.Legends.Length - 1
If i = childID Then
chartControl.Legends(i).Selected = True
Else
chartControl.Legends(i).Selected = False
End If
Next i
' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
If (selection And AccessibleSelection.AddSelection) <> 0 Then
chartControl.Legends(childID).Selected = True
End If
' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
chartControl.Legends(childID).Selected = False
End If
End If
End Sub
End Class
' Inner Class that represents a legend for a curve in the chart.
Public Class CurveLegend
Private m_name As String
Private chart As ChartControl
Private accObj As CurveLegendAccessibleObject
Private m_selected As Boolean = True
Private m_location As Point
Public Sub New(chart As ChartControl, name As String)
Me.chart = chart
Me.m_name = name
End Sub
' Gets the accessibility object for the curve legend.
Public ReadOnly Property AccessibilityObject() As AccessibleObject
Get
If accObj Is Nothing Then
accObj = New CurveLegendAccessibleObject(Me)
End If
Return accObj
End Get
End Property
' Gets the bounds for the curve legend.
Public ReadOnly Property Bounds() As Rectangle
Get
Return New Rectangle(Location, Size)
End Get
End Property
' Gets or sets the location for the curve legend.
Public Property Location() As Point
Get
Return m_location
End Get
Set
m_location = value
chart.Invalidate()
' Notifies the chart of the location change. This is used for
' the accessibility information. AccessibleEvents.LocationChange
' tells the chart the reason for the notification.
chart.ExposeAccessibilityNotifyClients(AccessibleEvents.LocationChange, _
CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
End Set
End Property
' Gets or sets the Name for the curve legend.
Public Property Name() As String
Get
Return m_name
End Get
Set
If m_name <> value Then
m_name = value
chart.Invalidate()
' Notifies the chart of the name change. This is used for
' the accessibility information. AccessibleEvents.NameChange
' tells the chart the reason for the notification.
chart.ExposeAccessibilityNotifyClients(AccessibleEvents.NameChange, _
CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
End If
End Set
End Property
' Gets or sets the Selected state for the curve legend.
Public Property Selected() As Boolean
Get
Return m_selected
End Get
Set
If m_selected <> value Then
m_selected = value
chart.Invalidate()
' Notifies the chart of the selection value change. This is used for
' the accessibility information. The AccessibleEvents value varies
' on whether the selection is true (AccessibleEvents.SelectionAdd) or
' false (AccessibleEvents.SelectionRemove).
If m_selected Then
chart.ExposeAccessibilityNotifyClients(AccessibleEvents.SelectionAdd, _
CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
Else
chart.ExposeAccessibilityNotifyClients(AccessibleEvents.SelectionRemove, _
CType(AccessibilityObject, CurveLegendAccessibleObject).ID)
End If
End If
End Set
End Property
' Gets the Size for the curve legend.
Public ReadOnly Property Size() As Size
Get
Dim legendHeight As Integer = chart.Font.Height + 4
Dim g As Graphics = chart.CreateGraphics()
Dim legendWidth As Integer = CInt(g.MeasureString(Name, chart.Font).Width) + 4
Return New Size(legendWidth, legendHeight)
End Get
End Property
' Inner class CurveLegendAccessibleObject represents accessible information
' associated with the CurveLegend object.
Public Class CurveLegendAccessibleObject
Inherits AccessibleObject
Private curveLegend As CurveLegend
Public Sub New(curveLegend As CurveLegend)
Me.curveLegend = curveLegend
End Sub
' Private property that helps get the reference to the parent ChartControl.
Private ReadOnly Property ChartControl() As ChartControlAccessibleObject
Get
Return CType(Parent, ChartControlAccessibleObject)
End Get
End Property
' Friend helper function that returns the ID for this CurveLegend.
Friend ReadOnly Property ID() As Integer
Get
Dim i As Integer
For i = 0 To (ChartControl.GetChildCount()) - 1
If ChartControl.GetChild(i) Is Me Then
Return i
End If
Next i
Return - 1
End Get
End Property
' Gets the Bounds for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Bounds() As Rectangle
Get
' The bounds is in screen coordinates.
Dim loc As Point = curveLegend.Location
Return New Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size)
End Get
End Property
' Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
Public Overrides Property Name() As String
Get
Return curveLegend.Name
End Get
Set
curveLegend.Name = value
End Set
End Property
' Gets the Curve Legend Parent's Accessible object.
' This is used by accessibility programs.
Public Overrides ReadOnly Property Parent() As AccessibleObject
Get
Return curveLegend.chart.AccessibilityObject
End Get
End Property
' Gets the role for the CurveLegend. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.StaticText
End Get
End Property
' Gets the state based on the selection for the CurveLegend.
' This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Dim stateTemp As AccessibleStates = AccessibleStates.Selectable
If curveLegend.Selected Then
stateTemp = stateTemp Or AccessibleStates.Selected
End If
Return stateTemp
End Get
End Property
' Navigates through siblings of this CurveLegend. This is used by accessibility programs.
Public Overrides Function Navigate(navdir As AccessibleNavigation) As AccessibleObject
' Use the Friend NavigateFromChild helper function that exists
' on ChartControlAccessibleObject.
Return ChartControl.NavigateFromChild(Me, navdir)
End Function
' Selects or unselects this CurveLegend. This is used by accessibility programs.
Public Overrides Sub [Select](selection As AccessibleSelection)
' Use the internal SelectChild helper function that exists
' on ChartControlAccessibleObject.
ChartControl.SelectChild(Me, selection)
End Sub
End Class
End Class
End Class
End Namespace 'ChartControlNameSpace
Poznámky
Aplikace pro usnadnění přístupu můžou upravovat funkce aplikace, aby se zlepšila použitelnost pro uživatele s postižením.
Pro uživatele, kteří jsou zrakově postižení, můžete upravit funkce softwaru a operačního systému tak, aby vyhovovaly jejich potřebám. Můžete například zvětšit text a obrázky a vykreslit je kontrastem. Kromě toho můžete přizpůsobit barvoslepost s vhodným použitím barev. Pro uživatele, kteří jsou vážně zrakově postižení, jsou počítače přístupné pomocí pomocných prvků pro kontrolu obrazovky, které překládají text na obrazovku na řeč nebo na dynamické, aktualizovatelné, braillské zobrazení.
Pro uživatele, kteří jsou špatně slyšet, můžete navrhnout programy, které používají vizuální pomůcky, jako je blikající panel nástrojů; nebo můžete zobrazovat mluvené zprávy jako text. Když je například zapnutá, SoundSentry funkce, možnost přístupnosti v Ovládací panely, poskytuje vizuální upozornění při každém spuštění systému zvuk alarmu.
U uživatelů s pohybovým postižením můžete navrhovat ovládací prvky, které zpřesní nebo eliminují používání klávesnice a myši, a tím zlepšit přístupnost počítače. Ovládací panely nabízí pomoc. Jednou z možností je například použít číselnou klávesnici místo myši pro navigaci. Další možností, která se nazývá StickyKeys, umožňuje uživatelům, kteří nemohou podržet dvě nebo více kláves najednou (například CTRL+P), aby získali stejný výsledek zadáním jedné klávesy najednou.
Pro uživatele s kognitivním a jazykovým postižením můžete navrhnout softwarové programy tak, aby lépe vyhovovaly jejich potřebám. Pro tyto uživatele může být přínosem například použití nápadného nebo kurátorovaného sekvencování, nekomplicitovaných zobrazení, menšího počtu slov a úrovně čtení cílené na základní školní standardy.
Pro uživatele s poruchami záchvatů můžete navrhnout softwarové programy, které eliminují záchvaty vyvolávání vzorů.
Další informace o přístupnosti, včetně informací o aplikacích pro usnadnění přístupu, najdete v tématu Funkce přístupnosti systému Windows.
Poznámka
Chcete-li použít AccessibleObject, musíte přidat odkaz na Accessibility sestavení nainstalované s rozhraním .NET Framework. model Windows Forms podporuje jenom aktivní přístupnost 2.0.
Poznámky pro dědice
Když dědíte z této třídy, můžete přepsat všechny členy.
Konstruktory
| AccessibleObject() |
Inicializuje novou instanci AccessibleObject třídy. |
Vlastnosti
| Bounds |
Získá umístění a velikost přístupného objektu. |
| DefaultAction |
Získá řetězec, který popisuje výchozí akci objektu. Ne všechny objekty mají výchozí akci. |
| Description |
Získá řetězec, který popisuje vizuální vzhled zadaného objektu. Ne všechny objekty mají popis. |
| Help |
Získá popis toho, co objekt dělá nebo jak se objekt používá. |
| KeyboardShortcut |
Získá klávesovou zkratku nebo přístupový klíč pro přístupný objekt. |
| Name |
Získá nebo nastaví název objektu. |
| Parent |
Získá nadřazený objekt s podporou přístupnosti. |
| Role |
Získá roli tohoto přístupného objektu. |
| State |
Získá stav tohoto přístupného objektu. |
| Value |
Získá nebo nastaví hodnotu přístupného objektu. |
Metody
| CreateObjRef(Type) |
Vytvoří objekt, který obsahuje všechny relevantní informace potřebné k vygenerování proxy serveru používaného ke komunikaci se vzdáleným objektem. (Zděděno od MarshalByRefObject) |
| DoDefaultAction() |
Provede výchozí akci přidruženou k tomuto přístupnému objektu. |
| Equals(Object) |
Určí, zda se zadaný objekt rovná aktuálnímu objektu. (Zděděno od Object) |
| GetChild(Int32) |
Načte přístupné podřízené objekt odpovídající zadanému indexu. |
| GetChildCount() |
Načte počet podřízených položek patřících do přístupného objektu. |
| GetFocused() |
Načte objekt, který má fokus klávesnice. |
| GetHashCode() |
Slouží jako výchozí funkce hash. (Zděděno od Object) |
| GetHelpTopic(String) |
Získá identifikátor pro identifikátor tématu nápovědy a cestu k souboru nápovědy přidruženého k tomuto přístupnému objektu. |
| GetLifetimeService() |
Zastaralé.
Načte aktuální objekt služby životnosti, který řídí zásady životnosti pro tuto instanci. (Zděděno od MarshalByRefObject) |
| GetSelected() |
Načte aktuálně vybrané podřízené. |
| GetType() |
Type Získá aktuální instanci. (Zděděno od Object) |
| HitTest(Int32, Int32) |
Načte podřízený objekt na zadaných souřadnicích obrazovky. |
| InitializeLifetimeService() |
Zastaralé.
Získá objekt služby životnosti pro řízení zásad životnosti pro tuto instanci. (Zděděno od MarshalByRefObject) |
| MemberwiseClone() |
Vytvoří použádnou kopii aktuálního souboru Object. (Zděděno od Object) |
| MemberwiseClone(Boolean) |
Vytvoří kopii aktuálního objektu bez MarshalByRefObject podmět. (Zděděno od MarshalByRefObject) |
| Navigate(AccessibleNavigation) |
Přejde na jiný přístupný objekt. |
| RaiseAutomationNotification(AutomationNotificationKind, AutomationNotificationProcessing, String) |
Vyvolá událost oznámení automatizace uživatelského rozhraní. |
| RaiseLiveRegionChanged() |
Vyvolá událost automatizace uživatelského rozhraní LiveRegionChanged. |
| Select(AccessibleSelection) |
Upraví výběr nebo přesune fokus klávesnice přístupného objektu. |
| ToString() |
Vrátí řetězec, který představuje aktuální objekt. (Zděděno od Object) |
| UseStdAccessibleObjects(IntPtr) |
Přidruží objekt k instanci objektu AccessibleObject na základě popisovače objektu. |
| UseStdAccessibleObjects(IntPtr, Int32) |
Přidruží objekt k instanci AccessibleObject objektu na základě popisovače a ID objektu objektu. |
Explicitní implementace rozhraní
| IAccessible.accChildCount |
Získá počet podřízených rozhraní, která patří k tomuto objektu. Popis tohoto člena naleznete v tématu accChildCount. |
| IAccessible.accDoDefaultAction(Object) |
Provede výchozí akci zadaného objektu. Ne všechny objekty mají výchozí akci. Popis tohoto člena naleznete v tématu accDoDefaultAction(Object). |
| IAccessible.accFocus |
Získá objekt, který má fokus klávesnice. Popis tohoto člena naleznete v tématu accFocus. |
| IAccessible.accHitTest(Int32, Int32) |
Získá podřízený objekt na zadaných souřadnicích obrazovky. Popis tohoto člena naleznete v tématu accHitTest(Int32, Int32). |
| IAccessible.accLocation(Int32, Int32, Int32, Int32, Object) |
Získá aktuální umístění obrazovky objektu. Popis tohoto člena naleznete v tématu accLocation(Int32, Int32, Int32, Int32, Object). |
| IAccessible.accNavigate(Int32, Object) |
Přejde na přístupný objekt vzhledem k aktuálnímu objektu. Popis tohoto člena naleznete v tématu accNavigate(Int32, Object). |
| IAccessible.accParent |
Získá nadřazený přístupný objekt tohoto objektu. Popis tohoto člena naleznete v tématu accParent. |
| IAccessible.accSelect(Int32, Object) |
Upraví výběr nebo přesune fokus klávesnice přístupného objektu. Popis tohoto člena naleznete v tématu accSelect(Int32, Object). |
| IAccessible.accSelection |
Získá vybrané podřízené objekty přístupného objektu. Popis tohoto člena naleznete v tématu accSelection. |
| IReflect.GetField(String, BindingFlags) |
FieldInfo Získá objekt odpovídající zadanému poli a příznaku vazby. Popis tohoto člena naleznete v tématu GetField(String, BindingFlags). |
| IReflect.GetFields(BindingFlags) |
Získá pole FieldInfo objektů odpovídajících všem polím aktuální třídy. Popis tohoto člena naleznete v tématu GetFields(BindingFlags). |
| IReflect.GetMember(String, BindingFlags) |
Získá pole MemberInfo objektů odpovídajících všem veřejným členům nebo všem členům, které odpovídají zadanému názvu. Popis tohoto člena naleznete v tématu GetMember(String, BindingFlags). |
| IReflect.GetMembers(BindingFlags) |
Získá pole MemberInfo objektů odpovídajících všem veřejným členům nebo všem členům aktuální třídy. Popis tohoto člena naleznete v tématu GetMembers(BindingFlags). |
| IReflect.GetMethod(String, BindingFlags) |
MethodInfo Získá objekt odpovídající zadané metodě v rámci zadaných omezení hledání. Popis tohoto člena naleznete v tématu GetMethod(String, BindingFlags). |
| IReflect.GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]) |
MethodInfo Získá objekt odpovídající zadané metodě pomocí pole Typ vybrat z přetížených metod. Popis tohoto člena naleznete v tématu GetMethod(String, BindingFlags, Binder, Type[], ParameterModifier[]). |
| IReflect.GetMethods(BindingFlags) |
Získá pole MethodInfo objektů se všemi veřejnými metodami nebo všemi metodami aktuální třídy. Popis tohoto člena naleznete v tématu GetMethods(BindingFlags). |
| IReflect.GetProperties(BindingFlags) |
Získá pole PropertyInfo objektů odpovídajících všem veřejným vlastnostem nebo ke všem vlastnostem aktuální třídy. Popis tohoto člena naleznete v tématu GetProperties(BindingFlags). |
| IReflect.GetProperty(String, BindingFlags) |
PropertyInfo Získá objekt odpovídající zadané vlastnosti v rámci zadaných omezení hledání. Popis tohoto člena naleznete v tématu GetProperty(String, BindingFlags). |
| IReflect.GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]) |
PropertyInfo Získá objekt odpovídající zadané vlastnosti se zadanými omezeními hledání. Popis tohoto člena naleznete v tématu GetProperty(String, BindingFlags, Binder, Type, Type[], ParameterModifier[]). |
| IReflect.InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]) |
Vyvolá zadaný člen. Popis tohoto člena naleznete v tématu InvokeMember(String, BindingFlags, Binder, Object, Object[], ParameterModifier[], CultureInfo, String[]). |
| IReflect.UnderlyingSystemType |
Získá základní typ, který představuje IReflect objekt. Popis tohoto člena naleznete v tématu UnderlyingSystemType. |