Sdílet prostřednictvím


Postup přidání a odebrání položek z ConcurrentDictionary

Tento příklad ukazuje, jak přidat, načíst, aktualizovat a odebrat položky z objektu System.Collections.Concurrent.ConcurrentDictionary<TKey,TValue>. Tato třída kolekce je implementace bezpečná pro přístup z více vláken. Doporučujeme ho použít vždy, když se více vláken může pokoušet o souběžný přístup k prvkům.

ConcurrentDictionary<TKey,TValue> poskytuje několik metod usnadnění, které kódu nepotřebují nejprve zkontrolovat, zda existuje klíč předtím, než se pokusí přidat nebo odebrat data. Následující tabulka uvádí tyto metody usnadnění a popisuje, kdy je použít.

metoda Použít když
AddOrUpdate Chcete přidat novou hodnotu pro zadaný klíč a pokud klíč již existuje, chcete nahradit jeho hodnotu.
GetOrAdd Chcete načíst existující hodnotu pro zadaný klíč a pokud klíč neexistuje, chcete zadat pár klíč/hodnota.
TryAdd, TryGetValue, , TryUpdateTryRemove Chcete přidat, získat, aktualizovat nebo odebrat pár klíč/hodnota a pokud klíč již existuje nebo pokus z nějakého jiného důvodu selže, chcete provést nějakou alternativní akci.

Příklad

Následující příklad používá dvě Task instance k přidání některých elementů do ConcurrentDictionary<TKey,TValue> souběžného stavu a potom vypíše veškerý obsah, aby bylo možné ukázat, že prvky byly úspěšně přidány. Příklad také ukazuje, jak použít AddOrUpdate, TryGetValuea GetOrAdd metody přidat, aktualizovat a načíst položky z kolekce.

using System;
using System.Collections.Concurrent;
using System.Collections.Generic;
using System.Threading;
using System.Threading.Tasks;

namespace DictionaryHowTo
{
    // The type of the Value to store in the dictionary.
    class CityInfo : IEqualityComparer<CityInfo>
    {
        public string Name { get; set; }
        public DateTime LastQueryDate { get; set; } = DateTime.Now;
        public decimal Longitude { get; set; } = decimal.MaxValue;
        public decimal Latitude { get; set; } = decimal.MaxValue;
        public int[] RecentHighTemperatures { get; set; } = new int[] { 0 };

        public bool Equals(CityInfo x, CityInfo y)
            => (x.Name, x.Longitude, x.Latitude) == 
                  (y.Name, y.Longitude, y.Latitude);

        public int GetHashCode(CityInfo cityInfo) =>
            cityInfo?.Name.GetHashCode() ?? throw new ArgumentNullException(nameof(cityInfo));
    }

    class Program
    {
        static readonly ConcurrentDictionary<string, CityInfo> Cities =
            new ConcurrentDictionary<string, CityInfo>(StringComparer.OrdinalIgnoreCase);

        static async Task Main()
        {
            CityInfo[] cityData =
            {
                new CityInfo { Name = "Boston", Latitude = 42.358769m, Longitude = -71.057806m, RecentHighTemperatures = new int[] { 56, 51, 52, 58, 65, 56,53} },
                new CityInfo { Name = "Miami", Latitude = 25.780833m, Longitude = -80.195556m, RecentHighTemperatures = new int[] { 86,87,88,87,85,85,86 } },
                new CityInfo { Name = "Los Angeles", Latitude = 34.05m, Longitude = -118.25m, RecentHighTemperatures =   new int[] { 67,68,69,73,79,78,78 } },
                new CityInfo { Name = "Seattle", Latitude = 47.609722m, Longitude =  -122.333056m, RecentHighTemperatures =   new int[] { 49,50,53,47,52,52,51 } },
                new CityInfo { Name = "Toronto", Latitude = 43.716589m, Longitude = -79.340686m, RecentHighTemperatures =   new int[] { 53,57, 51,52,56,55,50 } },
                new CityInfo { Name = "Mexico City", Latitude = 19.432736m, Longitude = -99.133253m, RecentHighTemperatures =   new int[] { 72,68,73,77,76,74,73 } },
                new CityInfo { Name = "Rio de Janeiro", Latitude = -22.908333m, Longitude = -43.196389m, RecentHighTemperatures =   new int[] { 72,68,73,82,84,78,84 } },
                new CityInfo { Name = "Quito", Latitude = -0.25m, Longitude = -78.583333m, RecentHighTemperatures =   new int[] { 71,69,70,66,65,64,61 } },
                new CityInfo { Name = "Milwaukee", Latitude = -43.04181m, Longitude = -87.90684m, RecentHighTemperatures =   new int[] { 32,47,52,64,49,44,56 } }
            };

            // Add some key/value pairs from multiple threads.
            await Task.WhenAll(
                Task.Run(() => TryAddCities(cityData)),
                Task.Run(() => TryAddCities(cityData)));

            static void TryAddCities(CityInfo[] cities)
            {
                for (var i = 0; i < cities.Length; ++i)
                {
                    var (city, threadId) = (cities[i], Thread.CurrentThread.ManagedThreadId);
                    if (Cities.TryAdd(city.Name, city))
                    {
                        Console.WriteLine($"Thread={threadId}, added {city.Name}.");
                    }
                    else
                    {
                        Console.WriteLine($"Thread={threadId}, could not add {city.Name}, it was already added.");
                    }
                }
            }

            // Enumerate collection from the app main thread.
            // Note that ConcurrentDictionary is the one concurrent collection
            // that does not support thread-safe enumeration.
            foreach (var city in Cities)
            {
                Console.WriteLine($"{city.Key} has been added.");
            }

            AddOrUpdateWithoutRetrieving();
            TryRemoveCity();
            RetrieveValueOrAdd();
            RetrieveAndUpdateOrAdd();

            Console.WriteLine("Press any key.");
            Console.ReadKey();
        }

        // This method shows how to add key-value pairs to the dictionary
        // in scenarios where the key might already exist.
        static void AddOrUpdateWithoutRetrieving()
        {
            // Sometime later. We receive new data from some source.
            var ci = new CityInfo
            {
                Name = "Toronto",
                Latitude = 43.716589M,
                Longitude = -79.340686M,
                RecentHighTemperatures = new int[] { 54, 59, 67, 82, 87, 55, -14 }
            };

            // Try to add data. If it doesn't exist, the object ci is added. If it does
            // already exist, update existingVal according to the custom logic.
            _ = Cities.AddOrUpdate(
                ci.Name,
                ci,
                (cityName, existingCity) =>
                {
                    // If this delegate is invoked, then the key already exists.
                    // Here we make sure the city really is the same city we already have.
                    if (ci != existingCity)
                    {
                        // throw new ArgumentException($"Duplicate city names are not allowed: {ci.Name}.");
                    }

                    // The only updatable fields are the temperature array and LastQueryDate.
                    existingCity.LastQueryDate = DateTime.Now;
                    existingCity.RecentHighTemperatures = ci.RecentHighTemperatures;

                    return existingCity;
                });

            // Verify that the dictionary contains the new or updated data.
            Console.Write($"Most recent high temperatures for {ci.Name} are: ");
            var temps = Cities[ci.Name].RecentHighTemperatures;
            Console.WriteLine(string.Join(", ", temps));
        }

        // This method shows how to use data and ensure that it has been
        // added to the dictionary.
        static void RetrieveValueOrAdd()
        {
            var searchKey = "Caracas";
            CityInfo retrievedValue = null;

            try
            {
                retrievedValue = Cities.GetOrAdd(searchKey, GetDataForCity(searchKey));
            }
            catch (ArgumentException e)
            {
                Console.WriteLine(e.Message);
            }

            // Use the data.
            if (retrievedValue != null)
            {
                Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
                var temps = Cities[retrievedValue.Name].RecentHighTemperatures;
                Console.WriteLine(string.Join(", ", temps));
            }
        }

        // This method shows how to remove a value from the dictionary.
        // If the value is unable to be removed, you can handle that by using the return
        // boolean value from the .TryRemove function.
        static void TryRemoveCity()
        {
            Console.WriteLine($"Total cities = {Cities.Count}");

            var searchKey = "Milwaukee";
            if (Cities.TryRemove(searchKey, out CityInfo retrievedValue))
            {
                Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
                var temps = retrievedValue.RecentHighTemperatures;
                Console.WriteLine(string.Join(", ", temps));
            }
            else
            {
                Console.WriteLine($"Unable to remove {searchKey}");
            }

            Console.WriteLine($"Total cities = {Cities.Count}");
        }

        // This method shows how to retrieve a value from the dictionary,
        // when you expect that the key/value pair already exists,
        // and then possibly update the dictionary with a new value for the key.
        static void RetrieveAndUpdateOrAdd()
        {
            var searchKey = "Buenos Aires";
            if (Cities.TryGetValue(searchKey, out CityInfo retrievedValue))
            {
                // Use the data.
                Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ");
                var temps = retrievedValue.RecentHighTemperatures;
                Console.WriteLine(string.Join(", ", temps));

                // Make a copy of the data. Our object will update its LastQueryDate automatically.
                var newValue = new CityInfo
                {
                    Name = retrievedValue.Name,
                    Latitude = retrievedValue.Latitude,
                    Longitude = retrievedValue.Longitude,
                    RecentHighTemperatures = retrievedValue.RecentHighTemperatures
                };

                // Replace the old value with the new value.
                if (!Cities.TryUpdate(searchKey, newValue, retrievedValue))
                {
                    // The data was not updated. Log error, throw exception, etc.
                    Console.WriteLine($"Could not update {retrievedValue.Name}");
                }
            }
            else
            {
                // Add the new key and value. Here we call a method to retrieve
                // the data. Another option is to add a default value here and
                // update with real data later on some other thread.
                var newValue = GetDataForCity(searchKey);
                if (Cities.TryAdd(searchKey, newValue))
                {
                    // Use the data.
                    Console.Write($"Most recent high temperatures for {newValue.Name} are: ");
                    var temps = newValue.RecentHighTemperatures;
                    Console.WriteLine(string.Join(", ", temps));
                }
                else
                {
                    Console.WriteLine($"Unable to add data for {searchKey}");
                }
            }
        }

        // Assume this method knows how to find long/lat/temp info for any specified city.
        static CityInfo GetDataForCity(string name) => name switch
        {
            "Caracas" => new CityInfo
            {
                Name = "Caracas",
                Longitude = 10.5M,
                Latitude = -66.916667M,
                RecentHighTemperatures = new int[] { 91, 89, 91, 91, 87, 90, 91 }
            },
            "Buenos Aires" => new CityInfo
            {
                Name = "Buenos Aires",
                Longitude = -34.61M,
                Latitude = -58.369997M,
                RecentHighTemperatures = new int[] { 80, 86, 89, 91, 84, 86, 88 }
            },
            _ => throw new ArgumentException($"Cannot find any data for {name}")
        };
    }
}
Imports System.Collections.Concurrent
Imports System.Collections.Generic
Imports System.Linq
Imports System.Text
Imports System.Threading
Imports System.Threading.Tasks

Namespace DictionaryHowToVB

    ' The type of the value to store in the dictionary.
    Class CityInfo
        Public Property Name As String
        Public Property LastQueryDate As DateTime
        Public Property Longitude As Decimal
        Public Property Latitude As Decimal
        Public Property RecentHighTemperatures As Integer()

        Public Sub New()
        End Sub

        Public Sub New(key As String)
            Name = key
            ' MaxValue means "not initialized".
            Longitude = Decimal.MaxValue
            Latitude = Decimal.MaxValue
            LastQueryDate = DateTime.Now
            RecentHighTemperatures = {0}
        End Sub

        Public Sub New(name As String, longitude As Decimal, latitude As Decimal, temps As Integer())
            Me.Name = name
            Me.Longitude = longitude
            Me.Latitude = latitude
            RecentHighTemperatures = temps
        End Sub
    End Class

    Class Program
        ' Create a new concurrent dictionary with the specified concurrency level and capacity.
        Shared cities As New ConcurrentDictionary(Of String, CityInfo)(System.Environment.ProcessorCount, 10)

        Shared Sub Main()

            Dim data As CityInfo() =
                {New CityInfo With {.Name = "Boston", .Latitude = 42.358769, .Longitude = -71.057806, .RecentHighTemperatures = {56, 51, 52, 58, 65, 56, 53}},
                    New CityInfo With {.Name = "Miami", .Latitude = 25.780833, .Longitude = -80.195556, .RecentHighTemperatures = {86, 87, 88, 87, 85, 85, 86}},
                    New CityInfo With {.Name = "Los Angeles", .Latitude = 34.05, .Longitude = -118.25, .RecentHighTemperatures = {67, 68, 69, 73, 79, 78, 78}},
                    New CityInfo With {.Name = "Seattle", .Latitude = 47.609722, .Longitude = -122.333056, .RecentHighTemperatures = {49, 50, 53, 47, 52, 52, 51}},
                    New CityInfo With {.Name = "Toronto", .Latitude = 43.716589, .Longitude = -79.340686, .RecentHighTemperatures = {53, 57, 51, 52, 56, 55, 50}},
                    New CityInfo With {.Name = "Mexico City", .Latitude = 19.432736, .Longitude = -99.133253, .RecentHighTemperatures = {72, 68, 73, 77, 76, 74, 73}},
                    New CityInfo With {.Name = "Rio de Janiero", .Latitude = -22.908333, .Longitude = -43.196389, .RecentHighTemperatures = {72, 68, 73, 82, 84, 78, 84}},
                    New CityInfo With {.Name = "Quito", .Latitude = -0.25, .Longitude = -78.583333, .RecentHighTemperatures = {71, 69, 70, 66, 65, 64, 61}}}

            '  Add some key/value pairs from multiple threads.
            Dim tasks(1) As Task

            tasks(0) = Task.Run(Sub()
                                    For i As Integer = 0 To 1
                                        If cities.TryAdd(data(i).Name, data(i)) Then
                                            Console.WriteLine($"Added {data(i).Name} on thread {Thread.CurrentThread.ManagedThreadId}")
                                        Else
                                            Console.WriteLine($"Could not add {data(i)}")
                                        End If
                                    Next
                                End Sub)

            tasks(1) = Task.Run(Sub()
                                    For i As Integer = 2 To data.Length - 1
                                        If cities.TryAdd(data(i).Name, data(i)) Then
                                            Console.WriteLine($"Added {data(i).Name} on thread {Thread.CurrentThread.ManagedThreadId}")
                                        Else
                                            Console.WriteLine($"Could not add {data(i)}")
                                        End If
                                    Next
                                End Sub)

            ' Output results so far.
            Task.WaitAll(tasks)

            ' Enumerate data on main thread. Note that
            ' ConcurrentDictionary is the one collection class
            ' that does not support thread-safe enumeration.
            For Each city In cities
                Console.WriteLine($"{city.Key} has been added")
            Next

            AddOrUpdateWithoutRetrieving()
            RetrieveValueOrAdd()
            RetrieveAndUpdateOrAdd()

            Console.WriteLine("Press any key")
            Console.ReadKey()

        End Sub

        ' This method shows how to add key-value pairs to the dictionary
        ' in scenarios where the key might already exist.
        Private Shared Sub AddOrUpdateWithoutRetrieving()
            ' Sometime later. We receive new data from some source.
            Dim ci As New CityInfo With {.Name = "Toronto", .Latitude = 43.716589, .Longitude = -79.340686, .RecentHighTemperatures = {54, 59, 67, 82, 87, 55, -14}}

            ' Try to add data. If it doesn't exist, the object ci is added. If it does
            ' already exist, update existingVal according to the custom logic in the 
            ' delegate.
            cities.AddOrUpdate(ci.Name, ci, Function(key, existingVal)
                                                ' If this delegate is invoked, then the key already exists.
                                                ' Here we make sure the city really is the same city we already have.
                                                ' (Support for multiple keys of the same name is left as an exercise for the reader.)
                                                If (ci.Name = existingVal.Name And ci.Longitude = existingVal.Longitude) = False Then
                                                    Throw New ArgumentException($"Duplicate city names are not allowed: {ci.Name}.")
                                                End If
                                                ' The only updatable fields are the temperature array and LastQueryDate.
                                                existingVal.LastQueryDate = DateTime.Now
                                                existingVal.RecentHighTemperatures = ci.RecentHighTemperatures
                                                Return existingVal
                                            End Function)

            ' Verify that the dictionary contains the new or updated data.
            Console.Write($"Most recent high temperatures for {cities(ci.Name).Name} are: ")
            Dim temps = cities(ci.Name).RecentHighTemperatures
            For Each temp In temps
                Console.Write($"{temp}, ")
            Next

            Console.WriteLine()

        End Sub

        'This method shows how to use data and ensure that it has been
        ' added to the dictionary.
        Private Shared Sub RetrieveValueOrAdd()
            Dim searchKey = "Caracas"
            Dim retrievedValue As CityInfo = Nothing

            Try
                retrievedValue = cities.GetOrAdd(searchKey, GetDataForCity(searchKey))

            Catch e As ArgumentException
                Console.WriteLine(e.Message)
            End Try

            ' Use the data.
            If Not retrievedValue Is Nothing Then
                Console.WriteLine($"Most recent high temperatures for {retrievedValue.Name} are: ")
                Dim temps = cities(retrievedValue.Name).RecentHighTemperatures
                For Each temp In temps
                    Console.Write($"{temp}, ")
                Next
            End If
            Console.WriteLine()

        End Sub

        ' This method shows how to retrieve a value from the dictionary,
        ' when you expect that the key/value pair already exists,
        ' and then possibly update the dictionary with a new value for the key.
        Private Shared Sub RetrieveAndUpdateOrAdd()
            Dim retrievedValue As New CityInfo()
            Dim searchKey = "Buenos Aires"

            If (cities.TryGetValue(searchKey, retrievedValue)) Then

                ' Use the data.
                Console.Write($"Most recent high temperatures for {retrievedValue.Name} are: ")
                Dim temps = retrievedValue.RecentHighTemperatures
                For Each temp In temps
                    Console.Write($"{temp}, ")
                Next
                ' Make a copy of the data. Our object will update its LastQueryDate automatically.
                Dim newValue As New CityInfo(retrievedValue.Name,
                                                        retrievedValue.Longitude,
                                                        retrievedValue.Latitude,
                                                        retrievedValue.RecentHighTemperatures)

            Else
                Console.WriteLine($"Unable to find data for {searchKey}")
            End If
        End Sub

        ' Assume this method knows how to find long/lat/temp info for any specified city.
        Private Shared Function GetDataForCity(searchKey As String) As CityInfo
            ' Real implementation left as exercise for the reader.
            If String.CompareOrdinal(searchKey, "Caracas") = 0 Then
                Return New CityInfo() With {.Name = "Caracas",
                                            .Longitude = 10.5,
                                            .Latitude = -66.916667,
                                            .RecentHighTemperatures = {91, 89, 91, 91, 87, 90, 91}}
            ElseIf String.CompareOrdinal(searchKey, "Buenos Aires") = 0 Then
                Return New CityInfo() With {.Name = "Buenos Aires",
                                            .Longitude = -34.61,
                                            .Latitude = -58.369997,
                                            .RecentHighTemperatures = {80, 86, 89, 91, 84, 86, 88}}
            Else
                Throw New ArgumentException($"Cannot find any data for {searchKey}")

            End If
        End Function
    End Class
End Namespace

ConcurrentDictionary<TKey,TValue> je určen pro scénáře s více vlákny. Zámky v kódu nemusíte používat k přidávání nebo odebírání položek z kolekce. Vždy je však možné, aby jedno vlákno načetla hodnotu a další vlákno okamžitě aktualizovalo kolekci tím, že dává stejnému klíči novou hodnotu.

I když všechny metody ConcurrentDictionary<TKey,TValue> jsou bezpečné pro přístup z více vláken, ne všechny metody jsou atomické, konkrétně GetOrAdd a AddOrUpdate. Aby neznámý kód neblokoval všechna vlákna, je delegát uživatele, který je předán těmto metodám, vyvolán mimo vnitřní zámek slovníku. Proto je možné, aby k této sekvenci událostí došlo:

  1. volání threadA , najde žádnou položku a vytvoří novou položku, která se přidá vyvoláním delegátavalueFactory.GetOrAdd

  2. ThreadB volá GetOrAdd souběžně, jeho valueFactory delegát je vyvolán a dorazí do interního zámku před threadA, takže jeho nový pár klíč-hodnota se přidá do slovníku.

  3. Delegát uživatele threadA se dokončí a vlákno dorazí na zámek, ale teď uvidí, že položka již existuje.

  4. ThreadA provede "Get" a vrátí data, která byla dříve přidána pomocí threadB.

Proto není zaručeno, že data, která jsou vrácena GetOrAdd , jsou stejná data, která byla vytvořena vláknem valueFactory. Při zavolání může dojít k AddOrUpdate podobné sekvenci událostí.

Viz také