Rediger

Del via


IRecordSequence.WriteRestartArea Method

Definition

When overridden in a derived class, writes a restart area to the IRecordSequence.

Overloads

WriteRestartArea(ArraySegment<Byte>)

When overridden in a derived class, writes a restart area to the IRecordSequence.

WriteRestartArea(IList<ArraySegment<Byte>>)

When overridden in a derived class, writes a restart area to the IRecordSequence.

WriteRestartArea(ArraySegment<Byte>, SequenceNumber)

When overridden in a derived class, writes a restart area to the IRecordSequence and updates the base sequence number.

WriteRestartArea(IList<ArraySegment<Byte>>, SequenceNumber)

When overridden in a derived class, writes a restart area to the IRecordSequence and updates the base sequence number.

WriteRestartArea(ArraySegment<Byte>, SequenceNumber, ReservationCollection)

When overridden in a derived class, writes a restart area to the IRecordSequence using a reservation, and updates the base sequence number.

WriteRestartArea(IList<ArraySegment<Byte>>, SequenceNumber, ReservationCollection)

When overridden in a derived class, writes a restart area to the IRecordSequence using a reservation, and updates the base sequence number.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

WriteRestartArea(ArraySegment<Byte>)

When overridden in a derived class, writes a restart area to the IRecordSequence.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(ArraySegment<System::Byte> data);
public System.IO.Log.SequenceNumber WriteRestartArea (ArraySegment<byte> data);
abstract member WriteRestartArea : ArraySegment<byte> -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As ArraySegment(Of Byte)) As SequenceNumber

Parameters

data
ArraySegment<Byte>

A list of byte array segments that will be concatenated and appended as the record.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. The Common Log File System (CLFS) maintains two restart areas to guarantee that at least one valid area is always available. When a recovery is necessary, the CLFS reads its restart area and all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process.

A restart area can be read using the ReadRestartAreas method.

The data in the byte array segments will be concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

Applies to

WriteRestartArea(IList<ArraySegment<Byte>>)

When overridden in a derived class, writes a restart area to the IRecordSequence.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(System::Collections::Generic::IList<ArraySegment<System::Byte>> ^ data);
public System.IO.Log.SequenceNumber WriteRestartArea (System.Collections.Generic.IList<ArraySegment<byte>> data);
abstract member WriteRestartArea : System.Collections.Generic.IList<ArraySegment<byte>> -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As IList(Of ArraySegment(Of Byte))) As SequenceNumber

Parameters

data
IList<ArraySegment<Byte>>

A list of byte array segments that will be concatenated and appended as the record.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

The data in the byte array segments will be concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

Applies to

WriteRestartArea(ArraySegment<Byte>, SequenceNumber)

When overridden in a derived class, writes a restart area to the IRecordSequence and updates the base sequence number.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(ArraySegment<System::Byte> data, System::IO::Log::SequenceNumber newBaseSequenceNumber);
public System.IO.Log.SequenceNumber WriteRestartArea (ArraySegment<byte> data, System.IO.Log.SequenceNumber newBaseSequenceNumber);
abstract member WriteRestartArea : ArraySegment<byte> * System.IO.Log.SequenceNumber -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As ArraySegment(Of Byte), newBaseSequenceNumber As SequenceNumber) As SequenceNumber

Parameters

data
ArraySegment<Byte>

A list of byte array segments that will be concatenated and appended as the record.

newBaseSequenceNumber
SequenceNumber

The new base sequence number. The specified sequence number must be greater than or equal to the current base sequence number.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

When a restart area is written, the data in the byte array segments are concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

When this method successfully completes, the base sequence number has been updated. All log records with sequence numbers less than the new base sequence number are inaccessible.

Applies to

WriteRestartArea(IList<ArraySegment<Byte>>, SequenceNumber)

When overridden in a derived class, writes a restart area to the IRecordSequence and updates the base sequence number.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(System::Collections::Generic::IList<ArraySegment<System::Byte>> ^ data, System::IO::Log::SequenceNumber newBaseSequenceNumber);
public System.IO.Log.SequenceNumber WriteRestartArea (System.Collections.Generic.IList<ArraySegment<byte>> data, System.IO.Log.SequenceNumber newBaseSequenceNumber);
abstract member WriteRestartArea : System.Collections.Generic.IList<ArraySegment<byte>> * System.IO.Log.SequenceNumber -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As IList(Of ArraySegment(Of Byte)), newBaseSequenceNumber As SequenceNumber) As SequenceNumber

Parameters

data
IList<ArraySegment<Byte>>

A list of byte array segments that will be concatenated and appended as the record.

newBaseSequenceNumber
SequenceNumber

The new base sequence number. The specified sequence number must be greater than or equal to the current base sequence number.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

When a restart area is written, the data in the byte array segments are concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

When this method successfully completes, the base sequence number has been updated. All log records with sequence numbers less than the new base sequence number are inaccessible.

Applies to

WriteRestartArea(ArraySegment<Byte>, SequenceNumber, ReservationCollection)

When overridden in a derived class, writes a restart area to the IRecordSequence using a reservation, and updates the base sequence number.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(ArraySegment<System::Byte> data, System::IO::Log::SequenceNumber newBaseSequenceNumber, System::IO::Log::ReservationCollection ^ reservation);
public System.IO.Log.SequenceNumber WriteRestartArea (ArraySegment<byte> data, System.IO.Log.SequenceNumber newBaseSequenceNumber, System.IO.Log.ReservationCollection reservation);
abstract member WriteRestartArea : ArraySegment<byte> * System.IO.Log.SequenceNumber * System.IO.Log.ReservationCollection -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As ArraySegment(Of Byte), newBaseSequenceNumber As SequenceNumber, reservation As ReservationCollection) As SequenceNumber

Parameters

data
ArraySegment<Byte>

A list of byte array segments that will be concatenated and appended as the record.

newBaseSequenceNumber
SequenceNumber

The new base sequence number. The specified sequence number must be greater than or equal to the current base sequence number.

reservation
ReservationCollection

A ReservationCollection that contains the reservation that should be used for this restart area.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

When a restart area is written, the data in the byte array segments are concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

If a reservation is specified, the written restart area will consume space that has been previously reserved, using a reservation contained in the collection. If the method succeeds, it will consume the smallest reservation that can contain the data, and that reservation will be removed from the collection.

When this method successfully completes, the base sequence number has been updated. All log records with sequence numbers less than the new base sequence number are inaccessible.

If a record sequence has been disposed of, or if you pass an invalid argument, exceptions are thrown immediately within this operation. Errors that occurred during an asynchronous append request, for example, a disk failure during the I/O request, will result in exceptions being thrown when the EndReserveAndAppend method is called.

Applies to

WriteRestartArea(IList<ArraySegment<Byte>>, SequenceNumber, ReservationCollection)

When overridden in a derived class, writes a restart area to the IRecordSequence using a reservation, and updates the base sequence number.

public:
 System::IO::Log::SequenceNumber WriteRestartArea(System::Collections::Generic::IList<ArraySegment<System::Byte>> ^ data, System::IO::Log::SequenceNumber newBaseSequenceNumber, System::IO::Log::ReservationCollection ^ reservation);
public System.IO.Log.SequenceNumber WriteRestartArea (System.Collections.Generic.IList<ArraySegment<byte>> data, System.IO.Log.SequenceNumber newBaseSequenceNumber, System.IO.Log.ReservationCollection reservation);
abstract member WriteRestartArea : System.Collections.Generic.IList<ArraySegment<byte>> * System.IO.Log.SequenceNumber * System.IO.Log.ReservationCollection -> System.IO.Log.SequenceNumber
Public Function WriteRestartArea (data As IList(Of ArraySegment(Of Byte)), newBaseSequenceNumber As SequenceNumber, reservation As ReservationCollection) As SequenceNumber

Parameters

data
IList<ArraySegment<Byte>>

A list of byte array segments that will be concatenated and appended as the record.

newBaseSequenceNumber
SequenceNumber

The new base sequence number. The specified sequence number must be greater than or equal to the current base sequence number.

reservation
ReservationCollection

A ReservationCollection that contains the reservation that should be used for this restart area.

Returns

The sequence number of the written restart area.

Exceptions

One or more of the arguments is invalid.

An I/O error occurred while writing the restart area.

The record sequence could not make enough free space to contain the new restart area.

The method was called after the sequence has been disposed of.

Remarks

A restart area is used to temporarily store information containing a client's last checkpoint operation. When a recovery is necessary, you can parse the restart area to retrieve all the data from the last checkpoint operation. This data initializes the transaction table, dirty pages table, and open file table so they can be used in the recovery process. A restart area can be read using the ReadRestartAreas method.

When a restart area is written, the data in the byte array segments are concatenated into a single byte array for appending as the record. No provision is made for splitting data back into array segments when the restart area is read.

If a reservation is specified, the written restart area will consume space that has been previously reserved, using a reservation contained in the collection. If the method succeeds, it will consume the smallest reservation that can contain the data, and that reservation will be removed from the collection.

When this method successfully completes, the base sequence number has been updated. All log records with sequence numbers less than the new base sequence number are inaccessible.

If a record sequence has been disposed of, or if you pass an invalid argument, exceptions are thrown immediately within this operation. Errors that occurred during an asynchronous append request, for example, a disk failure during the I/O request, will result in exceptions being thrown when the EndReserveAndAppend method is called.

Applies to