Virtual WAN Branches Route Table
Hi there, Documentation says : "All branch connections need to propagate their routes to the same set of route tables" link Is it planned to allow custom routing for branches ? For example, i have 2 VPN connections with 2…
Jump Server in Hub subscription
We have hub and spoke network topology connecting our azure subscription to on-prem When the user wants to connect to the Azure VMs, he will connect via the Jump Server. in the Hub, we are using Azure Virtual WAN as firewall . we wanted to check the…
Azure Virtual WAN Private zone DNS
For P2S connections where a DNS forwarder is necessary to resolve internal Azure resources do I still need to deploy a VM as a DNS Forwarder within the Virtual WAN
Routing issue for branches in Azure VWAN
Greetings, I am building a proof of concept architecture using Azure VWAN and having issues routing internal private traffic between branches. For sake of simplicity I will include only the parts of the infrastructure that are relevant to the…
What is the NAT rule limit for VPN Gateway in Virtual WAN?
I understand from the VPN Gateway documentation that the NAT rule limit is 100 (combined Ingress, Egress SNAT). Does that limit also apply to VPN Gateway within Virtual WAN? We're using this configuration to get past the limitation of 100 Site-To-Site…
How do you integrate a branch network whose address space overlaps spokes
I have a VWAN/Secure Hub topology in Azure with the hub and all of its internal spokes living in the 172.16.0.0/16 -> 172.24.0.0/16 spaces. Internally, this all works just fine. Now I need to be able to integrate external data centers by…
Azure vWAN + Fortinet deploy
Hello, We are trying to deploy Fortinet NVA solution into our vWAN hub. Whilst doing so, it redirects to Forinet homepage rather than opening a Azure config blade. Do we need to do anything in the backend to enable this? If yes, is that Microsoft or…
do you know if there is a way to share my az bastion with all the vnets connected with the virtual hub into my vwan?
i have an architecture with virtual wan in azure. i would like to have a vnet with share services (app gw, az bastion, ect...) connected with a hub. arround the virtual hub i have many vnet (projects) connected like the vnet share services. I observed…
Monitor ER and vWAN limits
Hello, As there are some specific limitations in ER and vWAN we really want to have some monitoring in place to make sure we do not hit the limits and of course get alerts when we are closing in. I've tried to get answers from MS support but they…
IPsec Question
Hello to All Professional there, i have a Question, while doing a school project i stuck on this, over which i am searching on internet from past one week. But couldn't found it. My Senerio) As we all know IPsec Protocol use UDP port 4500 or UDP…
Azure Bastion with Secured Virtual Hub
We would like to build a shared Bastion service, where VNET peering is based on a secured virtual hub. So, we build two virtual networks, one for Bastion and the other for VMs. The two virtual networks are peered through a secured virtual hub. We…
BGP routing with NVA in Azure vWAN hub
Hi, This is regarding setting up NVA in Azure vHub and run BGP for route advertisement. The scenario in question is what is shown in "Direct Interconnect model with NVA-in-VWAN-hub" at…
vWAN - monitoring of the P2S connection
HI all, I would like to prepare the dashboard where I could find the following information about vWAN / P2S connection show historical total users in past 7 days (per Region) show historical total users in past 30 days (per Region) show…
Can't get connectivity between P2S and S2S Azure VWAN
Hello, all! I am trying to configure an Azure vWAN with a hub to connect our on-prem sites, remote users, and vNet. I have successfully created the site-to-site tunnel from our on-prem test location, and it is showing connected in the hub. I have…
VWAN hub Meraki
We are configuring a VWAN hub with multiple site to site connections. Branch to branch connectivity is not desire with the exception of 1 location(hub2). While natively in Meraki we could have the hub2 location configured as a hub and peer all of the…
Branch to Branch in Vritual Wan configuratoin
What is the use of "Branch to Branch" in Virtual Wan configuration? We have a route loop issue and disabling it fixes it.
Force vWAN traffic with Azure Firewall and NVA
In my environment, we have configured multiple spokes which are attached to the hub and the spokes are not allowed to talk to each other. We have deployed third party NVA's on each spoke and also have a secure hub in place. Our requirement is the Azure…
Azure Virtual WAN - integrate public Facing AKS
I have a simple setup of Azure Virtual WAN - one Hub with S2S, P2S gateway and an Azure Firewall (one public ip). All traffic is secured by the firewall and p2s clients have a forced tunnel to also use the firewall as their public ip. I have a spoke…
Azure Virtual WAN and Monitor - metrics lacking
Are there currently some limitations as to what Azure Monitor can view for Azure Virtual WAN? It seems that the ExpressRoute related metrics are unavailable. Previously we had ER gateways outside of vWAN and could get its metrics monitored and alert…
connection between differnt Azure Virtual WAN
Hi Experts, I'd like to connect Azure Virtual hubs belonging different Azure Virtual WAN. For example, I want to connect Virtual Hub A in Virtual WAN in and Virtual Hub B in Virtual WAN B, and Subscription A has Virtual WAN A and Subscription B has…