Muokkaa

Jaa


Migrate data from Amazon S3 to Azure Data Lake Storage Gen2

APPLIES TO: Azure Data Factory Azure Synapse Analytics

Tip

Try out Data Factory in Microsoft Fabric, an all-in-one analytics solution for enterprises. Microsoft Fabric covers everything from data movement to data science, real-time analytics, business intelligence, and reporting. Learn how to start a new trial for free!

Use the templates to migrate petabytes of data consisting of hundreds of millions of files from Amazon S3 to Azure Data Lake Storage Gen2.

Note

If you want to copy small data volume from AWS S3 to Azure (for example, less than 10 TB), it's more efficient and easy to use the Azure Data Factory Copy Data tool. The template that's described in this article is more than what you need.

About the solution templates

Data partition is recommended especially when migrating more than 10 TB of data. To partition the data, leverage the ‘prefix’ setting to filter the folders and files on Amazon S3 by name, and then each ADF copy job can copy one partition at a time. You can run multiple ADF copy jobs concurrently for better throughput.

Data migration normally requires one-time historical data migration plus periodically synchronizing the changes from AWS S3 to Azure. There are two templates below, where one template covers one-time historical data migration and another template covers synchronizing the changes from AWS S3 to Azure.

For the template to migrate historical data from Amazon S3 to Azure Data Lake Storage Gen2

This template (template name: migrate historical data from AWS S3 to Azure Data Lake Storage Gen2) assumes that you have written a partition list in an external control table in Azure SQL Database. So it will use a Lookup activity to retrieve the partition list from the external control table, iterate over each partition, and make each ADF copy job copy one partition at a time. Once any copy job completed, it uses Stored Procedure activity to update the status of copying each partition in control table.

The template contains five activities:

  • Lookup retrieves the partitions which have not been copied to Azure Data Lake Storage Gen2 from an external control table. The table name is s3_partition_control_table and the query to load data from the table is "SELECT PartitionPrefix FROM s3_partition_control_table WHERE SuccessOrFailure = 0".
  • ForEach gets the partition list from the Lookup activity and iterates each partition to the TriggerCopy activity. You can set the batchCount to run multiple ADF copy jobs concurrently. We have set 2 in this template.
  • ExecutePipeline executes CopyFolderPartitionFromS3 pipeline. The reason we create another pipeline to make each copy job copy a partition is because it will make you easy to rerun the failed copy job to reload that specific partition again from AWS S3. All other copy jobs loading other partitions will not be impacted.
  • Copy copies each partition from AWS S3 to Azure Data Lake Storage Gen2.
  • SqlServerStoredProcedure update the status of copying each partition in control table.

The template contains two parameters:

  • AWS_S3_bucketName is your bucket name on AWS S3 where you want to migrate data from. If you want to migrate data from multiple buckets on AWS S3, you can add one more column in your external control table to store the bucket name for each partition, and also update your pipeline to retrieve data from that column accordingly.
  • Azure_Storage_fileSystem is your fileSystem name on Azure Data Lake Storage Gen2 where you want to migrate data to.

For the template to copy changed files only from Amazon S3 to Azure Data Lake Storage Gen2

This template (template name: copy delta data from AWS S3 to Azure Data Lake Storage Gen2) uses LastModifiedTime of each file to copy the new or updated files only from AWS S3 to Azure. Be aware if your files or folders has already been time partitioned with timeslice information as part of the file or folder name on AWS S3 (for example, /yyyy/mm/dd/file.csv), you can go to this tutorial to get the more performant approach for incremental loading new files. This template assumes that you have written a partition list in an external control table in Azure SQL Database. So it will use a Lookup activity to retrieve the partition list from the external control table, iterate over each partition, and make each ADF copy job copy one partition at a time. When each copy job starts to copy the files from AWS S3, it relies on LastModifiedTime property to identify and copy the new or updated files only. Once any copy job completed, it uses Stored Procedure activity to update the status of copying each partition in control table.

The template contains seven activities:

  • Lookup retrieves the partitions from an external control table. The table name is s3_partition_delta_control_table and the query to load data from the table is "select distinct PartitionPrefix from s3_partition_delta_control_table".
  • ForEach gets the partition list from the Lookup activity and iterates each partition to the TriggerDeltaCopy activity. You can set the batchCount to run multiple ADF copy jobs concurrently. We have set 2 in this template.
  • ExecutePipeline executes DeltaCopyFolderPartitionFromS3 pipeline. The reason we create another pipeline to make each copy job copy a partition is because it will make you easy to rerun the failed copy job to reload that specific partition again from AWS S3. All other copy jobs loading other partitions will not be impacted.
  • Lookup retrieves the last copy job run time from the external control table so that the new or updated files can be identified via LastModifiedTime. The table name is s3_partition_delta_control_table and the query to load data from the table is "select max(JobRunTime) as LastModifiedTime from s3_partition_delta_control_table where PartitionPrefix = '@{pipeline().parameters.prefixStr}' and SuccessOrFailure = 1".
  • Copy copies new or changed files only for each partition from AWS S3 to Azure Data Lake Storage Gen2. The property of modifiedDatetimeStart is set to the last copy job run time. The property of modifiedDatetimeEnd is set to the current copy job run time. Be aware the time is applied to UTC time zone.
  • SqlServerStoredProcedure update the status of copying each partition and copy run time in control table when it succeeds. The column of SuccessOrFailure is set to 1.
  • SqlServerStoredProcedure update the status of copying each partition and copy run time in control table when it fails. The column of SuccessOrFailure is set to 0.

The template contains two parameters:

  • AWS_S3_bucketName is your bucket name on AWS S3 where you want to migrate data from. If you want to migrate data from multiple buckets on AWS S3, you can add one more column in your external control table to store the bucket name for each partition, and also update your pipeline to retrieve data from that column accordingly.
  • Azure_Storage_fileSystem is your fileSystem name on Azure Data Lake Storage Gen2 where you want to migrate data to.

How to use these two solution templates

For the template to migrate historical data from Amazon S3 to Azure Data Lake Storage Gen2

  1. Create a control table in Azure SQL Database to store the partition list of AWS S3.

    Note

    The table name is s3_partition_control_table. The schema of the control table is PartitionPrefix and SuccessOrFailure, where PartitionPrefix is the prefix setting in S3 to filter the folders and files in Amazon S3 by name, and SuccessOrFailure is the status of copying each partition: 0 means this partition has not been copied to Azure and 1 means this partition has been copied to Azure successfully. There are 5 partitions defined in control table and the default status of copying each partition is 0.

    CREATE TABLE [dbo].[s3_partition_control_table](
        [PartitionPrefix] [varchar](255) NULL,
        [SuccessOrFailure] [bit] NULL
    )
    
    INSERT INTO s3_partition_control_table (PartitionPrefix, SuccessOrFailure)
    VALUES
    ('a', 0),
    ('b', 0),
    ('c', 0),
    ('d', 0),
    ('e', 0);
    
  2. Create a Stored Procedure on the same Azure SQL Database for control table.

    Note

    The name of the Stored Procedure is sp_update_partition_success. It will be invoked by SqlServerStoredProcedure activity in your ADF pipeline.

    CREATE PROCEDURE [dbo].[sp_update_partition_success] @PartPrefix varchar(255)
    AS
    BEGIN
    
        UPDATE s3_partition_control_table
        SET [SuccessOrFailure] = 1 WHERE [PartitionPrefix] = @PartPrefix
    END
    GO
    
  3. Go to the Migrate historical data from AWS S3 to Azure Data Lake Storage Gen2 template. Input the connections to your external control table, AWS S3 as the data source store and Azure Data Lake Storage Gen2 as the destination store. Be aware that the external control table and the stored procedure are reference to the same connection.

    Screenshot that shows the Migrate historical data from AWS S3 to Azure Data Lake Storage Gen2 template.

  4. Select Use this template.

    Screenshot that highlights the Use this template button.

  5. You see the 2 pipelines and 3 datasets were created, as shown in the following example:

    Screenshot that shows the two pipelines and three datasets that were created by using the template.

  6. Go to the "BulkCopyFromS3" pipeline and select Debug, enter the Parameters. Then, select Finish.

    Screenshot that shows where to select Debug and enter the parameters before you select Finish.

  7. You see results that are similar to the following example:

    Screenshot that shows the returned results.

For the template to copy changed files only from Amazon S3 to Azure Data Lake Storage Gen2

  1. Create a control table in Azure SQL Database to store the partition list of AWS S3.

    Note

    The table name is s3_partition_delta_control_table. The schema of the control table is PartitionPrefix, JobRunTime and SuccessOrFailure, where PartitionPrefix is the prefix setting in S3 to filter the folders and files in Amazon S3 by name, JobRunTime is the datetime value when copy jobs run, and SuccessOrFailure is the status of copying each partition: 0 means this partition has not been copied to Azure and 1 means this partition has been copied to Azure successfully. There are 5 partitions defined in control table. The default value for JobRunTime can be the time when one-time historical data migration starts. ADF copy activity will copy the files on AWS S3 which have been last modified after that time. The default status of copying each partition is 1.

    CREATE TABLE [dbo].[s3_partition_delta_control_table](
        [PartitionPrefix] [varchar](255) NULL,
        [JobRunTime] [datetime] NULL,
        [SuccessOrFailure] [bit] NULL
        )
    
    INSERT INTO s3_partition_delta_control_table (PartitionPrefix, JobRunTime, SuccessOrFailure)
    VALUES
    ('a','1/1/2019 12:00:00 AM',1),
    ('b','1/1/2019 12:00:00 AM',1),
    ('c','1/1/2019 12:00:00 AM',1),
    ('d','1/1/2019 12:00:00 AM',1),
    ('e','1/1/2019 12:00:00 AM',1);
    
  2. Create a Stored Procedure on the same Azure SQL Database for control table.

    Note

    The name of the Stored Procedure is sp_insert_partition_JobRunTime_success. It will be invoked by SqlServerStoredProcedure activity in your ADF pipeline.

    CREATE PROCEDURE [dbo].[sp_insert_partition_JobRunTime_success] @PartPrefix varchar(255), @JobRunTime datetime, @SuccessOrFailure bit
    AS
    BEGIN
        INSERT INTO s3_partition_delta_control_table (PartitionPrefix, JobRunTime, SuccessOrFailure)
        VALUES
            (@PartPrefix,@JobRunTime,@SuccessOrFailure)
    END
    GO
    
  3. Go to the Copy delta data from AWS S3 to Azure Data Lake Storage Gen2 template. Input the connections to your external control table, AWS S3 as the data source store and Azure Data Lake Storage Gen2 as the destination store. Be aware that the external control table and the stored procedure are reference to the same connection.

    Create a new connection

  4. Select Use this template.

    Use this template

  5. You see the 2 pipelines and 3 datasets were created, as shown in the following example:

    Review the pipeline

  6. Go the "DeltaCopyFromS3" pipeline and select Debug, and enter the Parameters. Then, select Finish.

    Click **Debug**

  7. You see results that are similar to the following example:

    Review the result

  8. You can also check the results from the control table by a query "select * from s3_partition_delta_control_table", you will see the output similar to the following example:

    Screenshot that shows the results from the control table after you run the query.