Jaa


Create HDInsight clusters with Azure Data Lake Storage Gen1 as default storage by using PowerShell

Learn how to use Azure PowerShell to configure Azure HDInsight clusters with Azure Data Lake Storage Gen1, as default storage. For instructions on creating an HDInsight cluster with Data Lake Storage Gen1 as additional storage, see Create an HDInsight cluster with Data Lake Storage Gen1 as additional storage.

Here are some important considerations for using HDInsight with Data Lake Storage Gen1:

  • The option to create HDInsight clusters with access to Data Lake Storage Gen1 as default storage is available for HDInsight version 3.5 and 3.6.

  • The option to create HDInsight clusters with access to Data Lake Storage Gen1 as default storage is not available for HDInsight Premium clusters.

To configure HDInsight to work with Data Lake Storage Gen1 by using PowerShell, follow the instructions in the next five sections.

Prerequisites

Note

We recommend that you use the Azure Az PowerShell module to interact with Azure. See Install Azure PowerShell to get started. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.

Before you begin this tutorial, make sure that you meet the following requirements:

  • An Azure subscription: Go to Get Azure free trial.

  • Azure PowerShell 1.0 or greater: See How to install and configure PowerShell.

  • Windows Software Development Kit (SDK): To install Windows SDK, go to Downloads and tools for Windows 10. The SDK is used to create a security certificate.

  • Microsoft Entra service principal: This tutorial describes how to create a service principal in Microsoft Entra ID. However, to create a service principal, you must be a Microsoft Entra administrator. If you are an administrator, you can skip this prerequisite and proceed with the tutorial.

    Note

    You can create a service principal only if you are a Microsoft Entra administrator. Your Microsoft Entra administrator must create a service principal before you can create an HDInsight cluster with Data Lake Storage Gen1. The service principal must be created with a certificate, as described in Create a service principal with certificate.

Create an Azure Data Lake Storage Gen1 account

To create a Data Lake Storage Gen1 account, do the following:

  1. From your desktop, open a PowerShell window, and then enter the snippets below. When you are prompted to sign in, sign in as one of the subscription administrators or owners.

    # Sign in to your Azure account
    Connect-AzAccount
    
    # List all the subscriptions associated to your account
    Get-AzSubscription
    
    # Select a subscription
    Set-AzContext -SubscriptionId <subscription ID>
    
    # Register for Data Lake Storage Gen1
    Register-AzResourceProvider -ProviderNamespace "Microsoft.DataLakeStore"
    

    Note

    If you register the Data Lake Storage Gen1 resource provider and receive an error similar to Register-AzResourceProvider : InvalidResourceNamespace: The resource namespace 'Microsoft.DataLakeStore' is invalid, your subscription might not be approved for Data Lake Storage Gen1. To enable your Azure subscription for Data Lake Storage Gen1, follow the instructions in Get started with Azure Data Lake Storage Gen1 by using the Azure portal.

  2. A Data Lake Storage Gen1 account is associated with an Azure resource group. Start by creating a resource group.

    $resourceGroupName = "<your new resource group name>"
    New-AzResourceGroup -Name $resourceGroupName -Location "East US 2"
    

    You should see an output like this:

    ResourceGroupName : hdiadlgrp
    Location          : eastus2
    ProvisioningState : Succeeded
    Tags              :
    ResourceId        : /subscriptions/<subscription-id>/resourceGroups/hdiadlgrp
    
  3. Create a Data Lake Storage Gen1 account. The account name you specify must contain only lowercase letters and numbers.

    $dataLakeStorageGen1Name = "<your new Data Lake Storage Gen1 name>"
    New-AzDataLakeStoreAccount -ResourceGroupName $resourceGroupName -Name $dataLakeStorageGen1Name -Location "East US 2"
    

    You should see an output like the following:

    ...
    ProvisioningState           : Succeeded
    State                       : Active
    CreationTime                : 5/5/2017 10:53:56 PM
    EncryptionState             : Enabled
    ...
    LastModifiedTime            : 5/5/2017 10:53:56 PM
    Endpoint                    : hdiadlstore.azuredatalakestore.net
    DefaultGroup                :
    Id                          : /subscriptions/<subscription-id>/resourceGroups/hdiadlgrp/providers/Microsoft.DataLakeStore/accounts/hdiadlstore
    Name                        : hdiadlstore
    Type                        : Microsoft.DataLakeStore/accounts
    Location                    : East US 2
    Tags                        : {}
    
  4. Using Data Lake Storage Gen1 as default storage requires you to specify a root path to which the cluster-specific files are copied during cluster creation. To create a root path, which is /clusters/hdiadlcluster in the snippet, use the following cmdlets:

    $myrootdir = "/"
    New-AzDataLakeStoreItem -Folder -AccountName $dataLakeStorageGen1Name -Path $myrootdir/clusters/hdiadlcluster
    

Set up authentication for role-based access to Data Lake Storage Gen1

Every Azure subscription is associated with a Microsoft Entra entity. Users and services that access subscription resources by using the Azure portal or the Azure Resource Manager API must first authenticate with Microsoft Entra ID. Access is granted to Azure subscriptions and services by assigning them the appropriate role on an Azure resource. For services, a service principal identifies the service in Microsoft Entra ID.

This section illustrates how to grant an application service, such as HDInsight, access to an Azure resource (the Data Lake Storage Gen1 account that you created earlier). You do so by creating a service principal for the application and assigning roles to it via PowerShell.

To set up Active Directory authentication for Data Lake Storage Gen1, perform the tasks in the following two sections.

Create a self-signed certificate

Make sure you have Windows SDK installed before proceeding with the steps in this section. You must have also created a directory, such as C:\mycertdir, where you create the certificate.

  1. From the PowerShell window, go to the location where you installed Windows SDK (typically, C:\Program Files (x86)\Windows Kits\10\bin\x86) and use the MakeCert utility to create a self-signed certificate and a private key. Use the following commands:

    $certificateFileDir = "<my certificate directory>"
    cd $certificateFileDir
    
    makecert -sv mykey.pvk -n "cn=HDI-ADL-SP" CertFile.cer -r -len 2048
    

    You will be prompted to enter the private key password. After the command is successfully executed, you should see CertFile.cer and mykey.pvk in the certificate directory that you specified.

  2. Use the Pvk2Pfx utility to convert the .pvk and .cer files that MakeCert created to a .pfx file. Run the following command:

    pvk2pfx -pvk mykey.pvk -spc CertFile.cer -pfx CertFile.pfx -po <password>
    

    When you are prompted, enter the private key password that you specified earlier. The value you specify for the -po parameter is the password that's associated with the .pfx file. After the command has been completed successfully, you should also see a CertFile.pfx in the certificate directory that you specified.

Create a Microsoft Entra ID and a service principal

In this section, you create a service principal for a Microsoft Entra application, assign a role to the service principal, and authenticate as the service principal by providing a certificate. To create an application in Microsoft Entra ID, run the following commands:

  1. Paste the following cmdlets in the PowerShell console window. Make sure that the value you specify for the -DisplayName property is unique. The values for -HomePage and -IdentiferUris are placeholder values and are not verified.

    $certificateFilePath = "$certificateFileDir\CertFile.pfx"
    
    $password = Read-Host -Prompt "Enter the password" # This is the password you specified for the .pfx file
    
    $certificatePFX = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2($certificateFilePath, $password)
    
    $rawCertificateData = $certificatePFX.GetRawCertData()
    
    $credential = [System.Convert]::ToBase64String($rawCertificateData)
    
    $application = New-AzADApplication `
        -DisplayName "HDIADL" `
        -HomePage "https://contoso.com" `
        -IdentifierUris "https://contoso.com" `
        -CertValue $credential  `
        -StartDate $certificatePFX.NotBefore  `
        -EndDate $certificatePFX.NotAfter
    
    $applicationId = $application.ApplicationId
    
  2. Create a service principal by using the application ID.

    $servicePrincipal = New-AzADServicePrincipal -ApplicationId $applicationId -Role Contributor
    
    $objectId = $servicePrincipal.Id
    
  3. Grant the service principal access to the Data Lake Storage Gen1 root and all the folders in the root path that you specified earlier. Use the following cmdlets:

    Set-AzDataLakeStoreItemAclEntry -AccountName $dataLakeStorageGen1Name -Path / -AceType User -Id $objectId -Permissions All
    Set-AzDataLakeStoreItemAclEntry -AccountName $dataLakeStorageGen1Name -Path /clusters -AceType User -Id $objectId -Permissions All
    Set-AzDataLakeStoreItemAclEntry -AccountName $dataLakeStorageGen1Name -Path /clusters/hdiadlcluster -AceType User -Id $objectId -Permissions All
    

Create an HDInsight Linux cluster with Data Lake Storage Gen1 as the default storage

In this section, you create an HDInsight Hadoop Linux cluster with Data Lake Storage Gen1 as the default storage. For this release, the HDInsight cluster and Data Lake Storage Gen1 must be in the same location.

  1. Retrieve the subscription tenant ID, and store it to use later.

    $tenantID = (Get-AzContext).Tenant.TenantId
    
  2. Create the HDInsight cluster by using the following cmdlets:

    # Set these variables
    
    $location = "East US 2"
    $storageAccountName = $dataLakeStorageGen1Name    # Data Lake Storage Gen1 account name
        $storageRootPath = "<Storage root path you specified earlier>"     # e.g. /clusters/hdiadlcluster
        $clusterName = "<unique cluster name>"
    $clusterNodes = <ClusterSizeInNodes>            # The number of nodes in the HDInsight cluster
    $httpCredentials = Get-Credential
    $sshCredentials = Get-Credential
    
    New-AzHDInsightCluster `
           -ClusterType Hadoop `
           -OSType Linux `
           -ClusterSizeInNodes $clusterNodes `
           -ResourceGroupName $resourceGroupName `
           -ClusterName $clusterName `
           -HttpCredential $httpCredentials `
           -Location $location `
           -DefaultStorageAccountType AzureDataLakeStore `
           -DefaultStorageAccountName "$storageAccountName.azuredatalakestore.net" `
           -DefaultStorageRootPath $storageRootPath `
           -Version "3.6" `
           -SshCredential $sshCredentials `
           -AadTenantId $tenantId `
           -ObjectId $objectId `
           -CertificateFilePath $certificateFilePath `
           -CertificatePassword $password
    

    After the cmdlet has been successfully completed, you should see an output that lists the cluster details.

Run test jobs on the HDInsight cluster to use Data Lake Storage Gen1

After you have configured an HDInsight cluster, you can run test jobs on it to ensure that it can access Data Lake Storage Gen1. To do so, run a sample Hive job to create a table that uses the sample data that's already available in Data Lake Storage Gen1 at <cluster root>/example/data/sample.log.

In this section, you make a Secure Shell (SSH) connection into the HDInsight Linux cluster that you created, and then you run a sample Hive query.

  1. After you have made the connection, start the Hive command-line interface (CLI) by using the following command:

    hive
    
  2. Use the CLI to enter the following statements to create a new table named vehicles by using the sample data in Data Lake Storage Gen1:

    DROP TABLE log4jLogs;
        CREATE EXTERNAL TABLE log4jLogs (t1 string, t2 string, t3 string, t4 string, t5 string, t6 string, t7 string)
        ROW FORMAT DELIMITED FIELDS TERMINATED BY ' '
        STORED AS TEXTFILE LOCATION 'adl:///example/data/';
        SELECT t4 AS sev, COUNT(*) AS count FROM log4jLogs WHERE t4 = '[ERROR]' AND INPUT__FILE__NAME LIKE '%.log' GROUP BY t4;
    

You should see the query output on the SSH console.

Note

The path to the sample data in the preceding CREATE TABLE command is adl:///example/data/, where adl:/// is the cluster root. Following the example of the cluster root that's specified in this tutorial, the command is adl://hdiadlstore.azuredatalakestore.net/clusters/hdiadlcluster. You can either use the shorter alternative or provide the complete path to the cluster root.

Access Data Lake Storage Gen1 by using HDFS commands

After you have configured the HDInsight cluster to use Data Lake Storage Gen1, you can use Hadoop Distributed File System (HDFS) shell commands to access the store.

In this section, you make an SSH connection into the HDInsight Linux cluster that you created, and then you run the HDFS commands.

After you've made the connection, list the files in Data Lake Storage Gen1 by using the following HDFS file system command.

hdfs dfs -ls adl:///

You can also use the hdfs dfs -put command to upload some files to Data Lake Storage Gen1, and then use hdfs dfs -ls to verify whether the files were successfully uploaded.

See also