Jaa

az network cross-region-lb address-pool address

  • Reference

Manage backend addresses of the cross-region load balance backend address pool.

Commands

Name Description Type Status
az network cross-region-lb address-pool address add

Add one backend address into the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address list

List all backend addresses of the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address remove

Remove one backend address from the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address show

Show the backend address from the load balance backend address pool.

 Core Preview
az network cross-region-lb address-pool address update

Update the backend address into the load balance backend address pool.

 Core Preview

az network cross-region-lb address-pool address add

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Add one backend address into the load balance backend address pool.

az network cross-region-lb address-pool address add --frontend-ip
                                                    --lb-name
                                                    --name
                                                    --pool-name
                                                    --resource-group
                                                    [--admin-state {Down, None, Up}]
                                                    [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Add one backend address into the load balance backend address pool.

az network cross-region-lb address-pool address add -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress --frontend-ip-address /subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/cli_test_lb_address_pool_addresses000001/providers/Microsoft.Network/loadBalancers/regional-lb/frontendIPConfigurations/fe-rlb2

Required Parameters

--frontend-ip --frontend-ip-address

The frontend IP configuration ID of a regional load balance.

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--admin-state

A list of administrative states which once set can override health probe so that Load Balancer will always forward new connections to backend, or deny new connections and reset existing connections.

Accepted values: Down, None, Up
--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address list

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

List all backend addresses of the load balance backend address pool.

az network cross-region-lb address-pool address list --lb-name
                                                     --pool-name
                                                     --resource-group

Examples

List all backend addresses of the load balance backend address pool.

az network cross-region-lb address-pool address list -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool

Required Parameters

--lb-name

The name of the load balancer.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address remove

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Remove one backend address from the load balance backend address pool.

az network cross-region-lb address-pool address remove --lb-name
                                                       --name
                                                       --pool-name
                                                       --resource-group
                                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Remove one backend address from the load balance backend address pool.

az network cross-region-lb address-pool address remove -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address show

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Show the backend address from the load balance backend address pool.

az network cross-region-lb address-pool address show --lb-name
                                                     --name
                                                     --pool-name
                                                     --resource-group

Examples

Show the backend address from the load balance backend address pool.

az network cross-region-lb address-pool address show -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-region-lb address-pool address update

Edit
Preview

This command is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Update the backend address into the load balance backend address pool.

az network cross-region-lb address-pool address update --lb-name
                                                       --name
                                                       --pool-name
                                                       --resource-group
                                                       [--add]
                                                       [--admin-state {Down, None, Up}]
                                                       [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                                       [--frontend-ip]
                                                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                       [--remove]
                                                       [--set]

Examples

Update the frontend ip of the backend address into the load balance backend address pool.

az network cross-region-lb address-pool address update -g MyResourceGroup --lb-name MyLb --pool-name MyAddressPool -n MyAddress --frontend-ip-address /subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/cli_test_lb_address_pool_addresses000001/providers/Microsoft.Network/loadBalancers/regional-lb/frontendIPConfigurations/fe-rlb2

Required Parameters

--lb-name

The name of the load balancer.

--name -n

Name of the backend address.

--pool-name

The name of the backend address pool.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--admin-state

A list of administrative states which once set can override health probe so that Load Balancer will always forward new connections to backend, or deny new connections and reset existing connections.

Accepted values: Down, None, Up
--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--frontend-ip --frontend-ip-address

The frontend IP configuration ID of a regional load balance.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--remove

Remove a property or an element from a list. Example: --remove property.list OR --remove propertyToRemove.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.