Setting up an Intel device

  • Artikkeli

If you're looking to manufacture with a Qualcomm device, please refer to the IoT Core Manufacturing Guide. You cannot use maker images for manufacturing.

Note

Make sure the device is now booting from the eMMC memory by entering the BIOS setup again and switching the Boot Drive order to load from the Hard Drive instead of from the USB Drive.

Using eMMC

  1. Download and install the Windows Assessment and Deployment kit with the correlating version of Windows 10 you're running.
  2. Insert a USB drive into your machine.
  3. Create a USB-bootable WinPE image:
  4. Start the Deployment and Imaging Tools Environment (C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools) as an administrator.
  5. Create a working copy of the Windows PE files. Specify either x86, amd64 or ARM: Copype amd64 C:\WINPE_amd64
  6. Install Windows PE to the USB flash drive, specifying the WinPE drive letter below. More information can be found here. MakeWinPEMedia /UFD C:\WinPE_amd64 P:
  7. Download the Windows 10 IoT Core image by double-clicking on the downloaded ISO file and locating the mounted Virtual CD-drive.
  8. This drive will contain an install file (.msi); double click it. This will create a new directory on your PC under C:\Program Files (x86)\Microsoft IoT\FFU\ in which you should see an image file, "flash.ffu".
  9. Download, unzip, and copy the eMMC Installer script to the USB device's root directory, along with the device's FFU.
  10. Connect the USB drive, mouse, and keyboard to the USB hub. Attach the HDMI display to your device, the device to the USB hub, and the power cord to the device.
  11. Go to the BIOS setup of the device. Select Windows as the Operating system and set the device to boot from your uSB drive. When the system reboots, you will see the WinPE command prompt. Switch the WinPE prompt to the USB Drive. This is usually C: or D: but you may need to try other driver letters.
  12. Run the eMMC Installer script, which will install the Windows 10 IoT Core image to the device's eMMC memory. When it completes, press any key and run wpeutil reboot. The system should boot into Windows 10 IoT Core, start the configuration process, and load the default application.

Connect to a network

Wired connection

If your device comes with an Ethernet port or USB Ethernet adapter support to enable a wired connection, attach an Ethernet cable to connect it to your network.

Wireless connection

If your device supports Wi-Fi connectivity and you've connected a display to it, you'll need to:

  1. Go into your default application and click the settings button next to the clock.
  2. On the settings page, select Network and Wi-Fi.
  3. Your device will begin scanning for wireless networks.
  4. Once your network appears in this list, select it and click Connect.

If you haven't connected a display and would like to connect via Wi-Fi, you'll need to:

  1. Go to the IoT Dashboard and click on My Devices.
  2. Find your unconfigured board from the list. Its name will begin with "AJ_"... (e.g. AJ_58EA6C68). If you don't see your board appear after a few minutes, try rebooting your board.
  3. Click on Configure Device and enter your network credentials. This will connect your board to the network.

Note

Wifi on your computer will need to be turned on in order to find other networks.

Connect to Windows Device Portal

Use the Windows Device Portal to connect your device through a web browser. The device portal makes valuable configuration and device management capabilities available.