שתף באמצעות

az networkfabric l2domain

  • Reference

Note

This reference is part of the managednetworkfabric extension for the Azure CLI (version 2.49.0 or higher). The extension will automatically install the first time you run an az networkfabric l2domain command. Learn more about extensions.

Manage L2 Isolation Domain Resource.

Commands

Name Description Type Status
az networkfabric l2domain create

Create a L2 Isolation Domain resource.

 Extension GA
az networkfabric l2domain delete

Delete the L2 Isolation Domain resource.

 Extension GA
az networkfabric l2domain list

List all L2 Isolation Domains in the provided resource group or subscription.

 Extension GA
az networkfabric l2domain show

Show details of the provided L2 Isolation Domain resource.

 Extension GA
az networkfabric l2domain update

Update the L2 Isolation Domain resource.

 Extension GA
az networkfabric l2domain update-admin-state

Enables isolation domain across the fabric or on specified racks.

 Extension GA
az networkfabric l2domain wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az networkfabric l2domain create

Create a L2 Isolation Domain resource.

az networkfabric l2domain create --nf-id
                                 --resource-group
                                 --resource-name
                                 --vlan-id
                                 [--annotation]
                                 [--location]
                                 [--mtu]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--tags]

Examples

Create a L2 Isolation Domain

az networkfabric l2domain create --resource-group "example-rg" --resource-name "example-l2domain" --location "westus3" --nf-id "/subscriptions/xxxxxx-xxxxxx-xxxx-xxxx-xxxxxx/resourceGroups/example-rg/providers/Microsoft.ManagedNetworkFabric/NetworkFabrics/example-fabricName" --vlan-id  501 --mtu 1500

Required Parameters

--nf-id

ARM Resource ID of the Network Fabric.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L2 Isolation Domain.

--vlan-id

Vlan Identifier of the Network Fabric. The value should be between 100 to 4094. Example: 501.

Optional Parameters

--annotation

Description for underlying resource.

--location -l

Location of Azure region When not specified, the location of the resource group will be used.

--mtu

Maximum transmission unit. The value should be between 64 to 9200. Default value is 1500. Example: 1500.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain delete

Delete the L2 Isolation Domain resource.

az networkfabric l2domain delete [--ids]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]

Examples

Delete the L2 Isolation Domain

az networkfabric l2domain delete --resource-group "example-rg" --resource-name "example-l2domain"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L2 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain list

List all L2 Isolation Domains in the provided resource group or subscription.

az networkfabric l2domain list [--resource-group]

Examples

List the L2 Isolation Domains for Resource Group

az networkfabric l2domain list --resource-group "example-rg"

List the L2 Isolation Domains for Subscription

az networkfabric l2domain list --subscription "<subscriptionId>"

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain show

Show details of the provided L2 Isolation Domain resource.

az networkfabric l2domain show [--ids]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]

Examples

Show the L2 Isolation Domain

az networkfabric l2domain show --resource-group "example-rg" --resource-name "example-l2domain"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L2 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain update

Update the L2 Isolation Domain resource.

az networkfabric l2domain update [--annotation]
                                 [--ids]
                                 [--mtu]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]
                                 [--tags]

Examples

Update the L2 Isolation Domain

az networkfabric l2domain update --resource-group "example-rg" --resource-name "example-l2domain" --mtu 1500

Optional Parameters

--annotation

Description for underlying resource.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--mtu

Maximum transmission unit. The value should be between 64 to 9200. Default value is 1500. Example: 1500.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L2 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Resource tags Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain update-admin-state

Enables isolation domain across the fabric or on specified racks.

az networkfabric l2domain update-admin-state [--ids]
                                             [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                             [--resource-group]
                                             [--resource-ids]
                                             [--resource-name]
                                             [--state {Disable, Enable}]
                                             [--subscription]

Examples

Update admin state of L2 Isolation Domain

az networkfabric l2domain update-admin-state --resource-group "example-rg" --resource-name "example-l2domain" --state "Enable"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-ids

Network Fabrics or Network Rack resource Id. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--resource-name

Name of the L2 Isolation Domain.

--state

Administrative state.

Accepted values: Disable, Enable
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l2domain wait

Place the CLI in a waiting state until a condition is met.

az networkfabric l2domain wait [--created]
                               [--custom]
                               [--deleted]
                               [--exists]
                               [--ids]
                               [--interval]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]
                               [--timeout]
                               [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L2 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.