שתף באמצעות

az palo-alto cloudngfw local-rulestack local-rule

  • Reference

Note

This reference is part of the palo-alto-networks extension for the Azure CLI (version 2.51.0 or higher). The extension will automatically install the first time you run an az palo-alto cloudngfw local-rulestack local-rule command. Learn more about extensions.

Manage local-rulestack local-rule resource.

Commands

Name Description Type Status
az palo-alto cloudngfw local-rulestack local-rule create

Create a LocalRulesResource.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule delete

Delete a LocalRulesResource.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule list

List LocalRulesResource resources by LocalRulestacks.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule refresh-counter

Refresh counters.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule reset-counter

Reset counters.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule show

Get a LocalRulesResource.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule show-counter

Get counters.

 Extension GA
az palo-alto cloudngfw local-rulestack local-rule wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az palo-alto cloudngfw local-rulestack local-rule create

Create a LocalRulesResource.

az palo-alto cloudngfw local-rulestack local-rule create --local-rulestack-name
                                                         --priority
                                                         --resource-group
                                                         --rule-name
                                                         [--action-type {Allow, DenyResetBoth, DenyResetServer, DenySilent}]
                                                         [--applications]
                                                         [--audit-comment]
                                                         [--category]
                                                         [--decryption-rule-type {None, SSLInboundInspection, SSLOutboundInspection}]
                                                         [--description]
                                                         [--destination]
                                                         [--enable-logging {DISABLED, ENABLED}]
                                                         [--etag]
                                                         [--inbound-certificate]
                                                         [--negate-destination {FALSE, TRUE}]
                                                         [--negate-source {FALSE, TRUE}]
                                                         [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                         [--protocol]
                                                         [--protocol-port-list]
                                                         [--rule-state {DISABLED, ENABLED}]
                                                         [--source]
                                                         [--tags]

Examples

Create a LocalRulesResource

az palo-alto cloudngfw local-rulestack local-rule create -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --rule-name MyLocalRule --priority "1" --action-type "Allow" --enable-logging "DISABLED" --rule-state "DISABLED"

Required Parameters

--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--rule-name

Rule name.

Optional Parameters

--action-type

Rule action.

Accepted values: Allow, DenyResetBoth, DenyResetServer, DenySilent
--applications

Array of rule applications Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--audit-comment

Rule comment.

--category

Rule category Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--decryption-rule-type

Enable or disable decryption.

Accepted values: None, SSLInboundInspection, SSLOutboundInspection
--description

Rule description.

--destination

Destination address Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--enable-logging

Enable or disable logging.

Accepted values: DISABLED, ENABLED
--etag

Etag info.

--inbound-certificate --inbound-inspection-certificate

Inbound Inspection Certificate.

--negate-destination

Cidr should not be 'any'.

Accepted values: FALSE, TRUE
--negate-source

Cidr should not be 'any'.

Accepted values: FALSE, TRUE
--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--protocol

Any, application-default, TCP:number, UDP:number.

Default value: application-default
--protocol-port-list

Prot port list Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--rule-state

State of this rule.

Accepted values: DISABLED, ENABLED
--source

Source address Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--tags

Tag for rule Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule delete

Delete a LocalRulesResource.

az palo-alto cloudngfw local-rulestack local-rule delete [--ids]
                                                         [--local-rulestack-name]
                                                         [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                         [--priority]
                                                         [--resource-group]
                                                         [--subscription]

Examples

Delete a LocalRulesResource

az palo-alto cloudngfw local-rulestack local-rule delete -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --priority "1"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--local-rulestack-name

LocalRulestack resource name.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule list

List LocalRulesResource resources by LocalRulestacks.

az palo-alto cloudngfw local-rulestack local-rule list --local-rulestack-name
                                                       --resource-group
                                                       [--max-items]
                                                       [--next-token]

Examples

List LocalRulesResource resources by LocalRulestacks

az palo-alto cloudngfw local-rulestack local-rule list -g MyResourceGroup --local-rulestack-name MyLocalRulestacks

Required Parameters

--local-rulestack-name

LocalRulestack resource name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule refresh-counter

Refresh counters.

az palo-alto cloudngfw local-rulestack local-rule refresh-counter [--firewall-name]
                                                                  [--ids]
                                                                  [--local-rulestack-name]
                                                                  [--priority]
                                                                  [--resource-group]
                                                                  [--subscription]

Examples

Refresh counters

az palo-alto cloudngfw local-rulestack local-rule refresh-counter -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --priority "1"

Optional Parameters

--firewall-name

Firewall resource name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule reset-counter

Reset counters.

az palo-alto cloudngfw local-rulestack local-rule reset-counter [--firewall-name]
                                                                [--ids]
                                                                [--local-rulestack-name]
                                                                [--priority]
                                                                [--resource-group]
                                                                [--subscription]

Examples

Reset counters

az palo-alto cloudngfw local-rulestack local-rule reset-counter -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --priority "1"

Optional Parameters

--firewall-name

Firewall resource name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule show

Get a LocalRulesResource.

az palo-alto cloudngfw local-rulestack local-rule show [--ids]
                                                       [--local-rulestack-name]
                                                       [--priority]
                                                       [--resource-group]
                                                       [--subscription]

Examples

Get a LocalRulesResource

az palo-alto cloudngfw local-rulestack local-rule show -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --priority "1"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule show-counter

Get counters.

az palo-alto cloudngfw local-rulestack local-rule show-counter [--firewall-name]
                                                               [--ids]
                                                               [--local-rulestack-name]
                                                               [--priority]
                                                               [--resource-group]
                                                               [--subscription]

Examples

Get counters

az palo-alto cloudngfw local-rulestack local-rule get-counter -g MyResourceGroup --local-rulestack-name MyLocalRulestacks --priority "1"

Optional Parameters

--firewall-name

Firewall resource name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az palo-alto cloudngfw local-rulestack local-rule wait

Place the CLI in a waiting state until a condition is met.

az palo-alto cloudngfw local-rulestack local-rule wait [--created]
                                                       [--custom]
                                                       [--deleted]
                                                       [--exists]
                                                       [--ids]
                                                       [--interval]
                                                       [--local-rulestack-name]
                                                       [--priority]
                                                       [--resource-group]
                                                       [--subscription]
                                                       [--timeout]
                                                       [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--local-rulestack-name

LocalRulestack resource name.

--priority

Local Rule priority.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.