az network vpn-gateway connection vpn-site-link-conn ipsec-policy

Reference

Note

This reference is part of the virtual-wan extension for the Azure CLI (version 2.55.0 or higher). The extension will automatically install the first time you run an az network vpn-gateway connection vpn-site-link-conn ipsec-policy command. Learn more about extensions.

Manage site-to-site VPN gateway connection VPN site link IPSec policies.

Commands

Name	Description	Type	Status
az network vpn-gateway connection vpn-site-link-conn ipsec-policy add	Add an IPSec policy to a site-to-site VPN gateway connection VPN site link.	Extension	GA
az network vpn-gateway connection vpn-site-link-conn ipsec-policy list	List site-to-site VPN gateway connection VPN site link IPSec policies.	Extension	GA
az network vpn-gateway connection vpn-site-link-conn ipsec-policy remove	Remove an IPSec policy from a site-to-site VPN gateway connection VPN site link.	Extension	GA

az network vpn-gateway connection vpn-site-link-conn ipsec-policy add

Add an IPSec policy to a site-to-site VPN gateway connection VPN site link.

az network vpn-gateway connection vpn-site-link-conn ipsec-policy add --dh-group {DHGroup1, DHGroup14, DHGroup2, DHGroup2048, DHGroup24, ECP256, ECP384, None}
                                                                      --ike-encryption {AES128, AES192, AES256, DES, DES3, GCMAES128, GCMAES256}
                                                                      --ike-integrity {GCMAES128, GCMAES256, MD5, SHA1, SHA256, SHA384}
                                                                      --ipsec-encryption {AES128, AES192, AES256, DES, DES3, GCMAES128, GCMAES192, GCMAES256, None}
                                                                      --ipsec-integrity {GCMAES128, GCMAES192, GCMAES256, MD5, SHA1, SHA256}
                                                                      --pfs-group {ECP256, ECP384, None, PFS1, PFS14, PFS2, PFS2048, PFS24, PFSMM}
                                                                      --sa-data-size
                                                                      --sa-lifetime
                                                                      [--connection-name]
                                                                      [--gateway-name]
                                                                      [--ids]
                                                                      [--name]
                                                                      [--no-wait]
                                                                      [--resource-group]
                                                                      [--subscription]

Examples

Add an IPSec policy to a site-to-site VPN gateway connection VPN site link

az network vpn-gateway connection vpn-site-link-conn ipsec-policy add -g MyRG --connection-name MyConnection --gateway-name MyGateway -n MyVPNSiteLinkConn --ipsec-encryption AES256 --ipsec-integrity SHA256 --sa-lifetime 86471 --sa-data-size 429496 --ike-encryption AES256 --ike-integrity SHA384 --dh-group DHGroup14 --pfs-group PFS14

Required Parameters

--dh-group

DH Groups used in IKE Phase 1 for initial SA.

Accepted values: DHGroup1, DHGroup14, DHGroup2, DHGroup2048, DHGroup24, ECP256, ECP384, None

--ike-encryption

IKE encryption algorithm (IKE phase 2).

Accepted values: AES128, AES192, AES256, DES, DES3, GCMAES128, GCMAES256

--ike-integrity

IKE integrity algorithm (IKE phase 2).

Accepted values: GCMAES128, GCMAES256, MD5, SHA1, SHA256, SHA384

--ipsec-encryption

IPSec encryption algorithm (IKE phase 1).

Accepted values: AES128, AES192, AES256, DES, DES3, GCMAES128, GCMAES192, GCMAES256, None

--ipsec-integrity

IPSec integrity algorithm (IKE phase 1).

Accepted values: GCMAES128, GCMAES192, GCMAES256, MD5, SHA1, SHA256

--pfs-group

The Pfs Groups used in IKE Phase 2 for new child SA.

Accepted values: ECP256, ECP384, None, PFS1, PFS14, PFS2, PFS2048, PFS24, PFSMM

--sa-data-size

IPSec Security Association (also called Quick Mode or Phase 2 SA) payload size in KB for a site-to-site VPN tunnel.

--sa-lifetime

IPSec Security Association (also called Quick Mode or Phase 2 SA) lifetime in seconds for a site-to-site VPN tunnel.

Optional Parameters

--connection-name

Name of the VPN gateway connection.

--gateway-name

Name of the VPN gateway.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

Name of the VPN site link connection.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network vpn-gateway connection vpn-site-link-conn ipsec-policy list

List site-to-site VPN gateway connection VPN site link IPSec policies.

az network vpn-gateway connection vpn-site-link-conn ipsec-policy list --connection-name
                                                                       --gateway-name
                                                                       --name
                                                                       --resource-group

Examples

List IPSec policies on a site-to-site VPN gateway connection VPN site link

az network vpn-gateway connection vpn-site-link-conn ipsec-policy list -g MyRG --connection-name MyConnection --gateway-name MyGateway -n MyVPNSiteLinkConn

Required Parameters

--connection-name

Name of the VPN gateway connection.

--gateway-name

Name of the VPN gateway.

--name -n

Name of the VPN site link connection.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network vpn-gateway connection vpn-site-link-conn ipsec-policy remove

Remove an IPSec policy from a site-to-site VPN gateway connection VPN site link.

az network vpn-gateway connection vpn-site-link-conn ipsec-policy remove --index
                                                                         [--connection-name]
                                                                         [--gateway-name]
                                                                         [--ids]
                                                                         [--name]
                                                                         [--no-wait]
                                                                         [--resource-group]
                                                                         [--subscription]

Examples

Remove an IPSec policy from a site-to-site VPN gateway connection VPN site link

az network vpn-gateway connection vpn-site-link-conn ipsec-policy remove -g MyRG --connection-name MyConnection --gateway-name MyGateway -n MyVPNSiteLinkConn --index 1

Required Parameters

--index

List index of the item (starting with 1).

Optional Parameters

--connection-name

Name of the VPN gateway connection.

--gateway-name

Name of the VPN gateway.

--ids

--name -n

Name of the VPN site link connection.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Dijeli putem

az network vpn-gateway connection vpn-site-link-conn ipsec-policy

Commands

az network vpn-gateway connection vpn-site-link-conn ipsec-policy add

Examples

Required Parameters

Optional Parameters

az network vpn-gateway connection vpn-site-link-conn ipsec-policy list

Examples

Required Parameters

az network vpn-gateway connection vpn-site-link-conn ipsec-policy remove

Examples

Required Parameters

Optional Parameters

Dodatni resursi