az webapp config

Reference

Note

This command group has commands that are defined in both Azure CLI and at least one extension. Install each extension to benefit from its extended capabilities. Learn more about extensions.

Configure a web app.

Commands

Name	Description	Type	Status
az webapp config access-restriction	Methods that show, set, add, and remove access restrictions on a webapp.	Core	GA
az webapp config access-restriction add	Adds an Access Restriction to the webapp.	Core	GA
az webapp config access-restriction remove	Removes an Access Restriction from the webapp.	Core	GA
az webapp config access-restriction set	Sets if SCM site is using the same restrictions as the main site and default actions.	Core	GA
az webapp config access-restriction show	Show Access Restriction settings for webapp.	Core	GA
az webapp config appsettings	Configure web app settings. Updating or removing application settings will cause an app recycle.	Core	GA
az webapp config appsettings delete	Delete web app settings.	Core	GA
az webapp config appsettings list	Get the details of a web app's settings.	Core	GA
az webapp config appsettings set	Set a web app's settings.	Core	GA
az webapp config backup	Manage backups for web apps.	Core	GA
az webapp config backup create	Create a backup of a web app.	Core	GA
az webapp config backup delete	Delete a web app backup.	Core	GA
az webapp config backup list	List backups of a web app.	Core	GA
az webapp config backup restore	Restore a web app from a backup.	Core	GA
az webapp config backup show	Show the backup schedule for a web app.	Core	GA
az webapp config backup update	Configure a new backup schedule for a web app.	Core	GA
az webapp config connection-string	Manage a web app's connection strings.	Core	GA
az webapp config connection-string delete	Delete a web app's connection strings.	Core	GA
az webapp config connection-string list	Get a web app's connection strings.	Core	GA
az webapp config connection-string set	Update a web app's connection strings.	Core	GA
az webapp config container	Manage an existing web app's container settings.	Core	GA
az webapp config container delete	Delete an existing web app's container settings.	Core	GA
az webapp config container set	Set an existing web app's container settings.	Core	GA
az webapp config container show	Get details of a web app's container settings.	Core	GA
az webapp config hostname	Configure hostnames for a web app.	Core	GA
az webapp config hostname add	Bind a hostname to a web app.	Core	GA
az webapp config hostname delete	Unbind a hostname from a web app.	Core	GA
az webapp config hostname get-external-ip	Get the external-facing IP address for a web app.	Core	GA
az webapp config hostname list	List all hostname bindings for a web app.	Core	GA
az webapp config set	Set a web app's configuration.	Core	GA
az webapp config show	Get the details of a web app's configuration.	Core	GA
az webapp config snapshot	Manage web app snapshots.	Core	GA
az webapp config snapshot list	List the restorable snapshots for a web app.	Core	GA
az webapp config snapshot restore	Restore a web app snapshot.	Core	GA
az webapp config ssl	Configure SSL certificates for web apps.	Core and Extension	GA
az webapp config ssl bind	Bind an SSL certificate to a web app.	Core	GA
az webapp config ssl bind (appservice-kube extension)	Bind an SSL certificate to a web app.	Extension	GA
az webapp config ssl create	Create a Managed Certificate for a hostname in a webapp app.	Core	Preview
az webapp config ssl delete	Delete an SSL certificate from a web app.	Core	GA
az webapp config ssl import	Import an SSL or App Service Certificate to a web app from Key Vault.	Core	GA
az webapp config ssl list	List SSL certificates for a web app.	Core	GA
az webapp config ssl show	Show the details of an SSL certificate for a web app.	Core	GA
az webapp config ssl unbind	Unbind an SSL certificate from a web app.	Core	GA
az webapp config ssl unbind (appservice-kube extension)	Unbind an SSL certificate from a web app.	Extension	GA
az webapp config ssl upload	Upload an SSL certificate to a web app.	Core	GA
az webapp config storage-account	Manage a web app's Azure storage account configurations. (Linux Web Apps and Windows Containers Web Apps Only).	Core	GA
az webapp config storage-account add	Add an Azure storage account configuration to a web app. (Linux Web Apps and Windows Containers Web Apps Only).	Core	GA
az webapp config storage-account delete	Delete a web app's Azure storage account configuration. (Linux Web Apps and Windows Containers Web Apps Only).	Core	GA
az webapp config storage-account list	Get a web app's Azure storage account configurations. (Linux Web Apps and Windows Containers Web Apps Only).	Core	GA
az webapp config storage-account update	Update an existing Azure storage account configuration on a web app. (Linux Web Apps and Windows Containers Web Apps Only).	Core	GA

az webapp config set

Set a web app's configuration.

az webapp config set [--acr-identity]
                     [--acr-use-identity {false, true}]
                     [--always-on {false, true}]
                     [--auto-heal-enabled {false, true}]
                     [--ftps-state {AllAllowed, Disabled, FtpsOnly}]
                     [--generic-configurations]
                     [--http20-enabled {false, true}]
                     [--ids]
                     [--java-container]
                     [--java-container-version]
                     [--java-version]
                     [--linux-fx-version]
                     [--min-tls-cipher-suite]
                     [--min-tls-version]
                     [--name]
                     [--net-framework-version]
                     [--number-of-workers]
                     [--php-version]
                     [--powershell-version]
                     [--prewarmed-instance-count]
                     [--python-version]
                     [--remote-debugging-enabled {false, true}]
                     [--resource-group]
                     [--runtime]
                     [--slot]
                     [--startup-file]
                     [--subscription]
                     [--use-32bit-worker-process {false, true}]
                     [--vnet-route-all-enabled {false, true}]
                     [--web-sockets-enabled {false, true}]
                     [--windows-fx-version]

Examples

turn on "alwaysOn"

az webapp config set -g MyResourceGroup -n MyUniqueApp --always-on true

set configuration through a JSON file called params.json

az webapp config set -g MyResourceGroup -n MyUniqueApp --generic-configurations "@.\params.json"

Optional Parameters

--acr-identity

Accept system or user assigned identity which will be set for acr image pull. Use '[system]' to refer system assigned identity, or a resource id to refer user assigned identity.

--acr-use-identity

Enable or disable pull image from acr use managed identity.

Accepted values: false, true

--always-on

Ensure web app gets loaded all the time, rather unloaded after been idle. Recommended when you have continuous web jobs running.

Accepted values: false, true

--auto-heal-enabled

Enable or disable auto heal.

Accepted values: false, true

--ftps-state

Set the Ftps state value for an app. Default value is 'AllAllowed'.

Accepted values: AllAllowed, Disabled, FtpsOnly

--generic-configurations

Provide site configuration list in a format of either key=value pair or @<json_file>. PowerShell and Windows Command Prompt users should use a JSON file to provide these configurations to avoid compatibility issues with escape characters.

--http20-enabled

Configures a web site to allow clients to connect over http2.0.

Accepted values: false, true

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--java-container

The java container, e.g., Tomcat, Jetty.

--java-container-version

The version of the java container, e.g., '8.0.23' for Tomcat.

--java-version

The version used to run your web app if using Java, e.g., '1.7' for Java 7, '1.8' for Java 8.

--linux-fx-version

The runtime stack used for your linux-based webapp, e.g., "RUBY|2.5.5", "NODE|12LTS", "PHP|7.2", "DOTNETCORE|2.1". See https://aka.ms/linux-stacks for more info.

--min-tls-cipher-suite

The minimum TLS Cipher Suite required for requests, e.g., 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384'.

--min-tls-version

The minimum version of TLS required for SSL requests, e.g., '1.0', '1.1', '1.2'.

--name -n

Name of the web app. If left unspecified, a name will be randomly generated. You can configure the default using az configure --defaults web=<name>.

--net-framework-version

The version used to run your web app if using .NET Framework, e.g., 'v4.0' for .NET 4.6 and 'v3.0' for .NET 3.5.

--number-of-workers

The number of workers to be allocated.

--php-version

The version used to run your web app if using PHP, e.g., 5.5, 5.6, 7.0.

--powershell-version

The version used to run your function app if using PowerShell, e.g., 7.2.

--prewarmed-instance-count

Number of pre-warmed instances a function app has.

--python-version

The version used to run your web app if using Python, e.g., 2.7, 3.4.

--remote-debugging-enabled

Enable or disable remote debugging.

Accepted values: false, true

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--runtime

Canonicalized web runtime in the format of Framework:Version, e.g. "PHP:7.2".Use az webapp list-runtimes for available list.

--slot -s

The name of the slot. Default to the productions slot if not specified.

--startup-file

The startup file for linux hosted web apps, e.g. 'process.json' for Node.js web.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--use-32bit-worker-process

Use 32 bits worker process or not.

Accepted values: false, true

--vnet-route-all-enabled

Configure regional VNet integration to route all traffic to the VNet.

Accepted values: false, true

--web-sockets-enabled

Enable or disable web sockets.

Accepted values: false, true

--windows-fx-version

A docker image name used for your windows container web app, e.g., microsoft/nanoserver:ltsc2016.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az webapp config show

Get the details of a web app's configuration.

az webapp config show [--ids]
                      [--name]
                      [--resource-group]
                      [--slot]
                      [--subscription]

Examples

Get the details of a web app's configuration. (autogenerated)

az webapp config show --name MyWebapp --resource-group MyResourceGroup

Optional Parameters

--ids

--name -n

Name of the web app. If left unspecified, a name will be randomly generated. You can configure the default using az configure --defaults web=<name>.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--slot -s

The name of the slot. Default to the productions slot if not specified.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Dijeli putem

az webapp config

Commands

az webapp config set

Examples

Optional Parameters

az webapp config show

Examples

Optional Parameters

Dodatni resursi