CustomAttributeData.Constructor Tulajdonság
Definíció
Fontos
Egyes információk olyan, kiadás előtti termékekre vonatkoznak, amelyek a kiadásig még jelentősen módosulhatnak. A Microsoft nem vállal kifejezett vagy törvényi garanciát az itt megjelenő információért.
ConstructorInfo Lekéri azt az objektumot, amely azt a konstruktort jelöli, amely inicializálta volna az egyéni attribútumot.
public:
property System::Reflection::ConstructorInfo ^ Constructor { System::Reflection::ConstructorInfo ^ get(); };public:
virtual property System::Reflection::ConstructorInfo ^ Constructor { System::Reflection::ConstructorInfo ^ get(); };[System.Runtime.InteropServices.ComVisible(true)]
public System.Reflection.ConstructorInfo Constructor { get; }[System.Runtime.InteropServices.ComVisible(true)]
public virtual System.Reflection.ConstructorInfo Constructor { get; }public virtual System.Reflection.ConstructorInfo Constructor { get; }[<System.Runtime.InteropServices.ComVisible(true)>]
member this.Constructor : System.Reflection.ConstructorInfomember this.Constructor : System.Reflection.ConstructorInfoPublic ReadOnly Property Constructor As ConstructorInfoPublic Overridable ReadOnly Property Constructor As ConstructorInfoTulajdonság értéke
Olyan objektum, amely azt a konstruktort jelöli, amely inicializálta volna az osztály aktuális példánya CustomAttributeData által képviselt egyéni attribútumot.
- Attribútumok
Példák
Az alábbi példa egy négy konstruktort és négy tulajdonságot tartalmazó egyéni attribútumot határoz meg. A tulajdonságok közül kettő írásvédett, és a konstruktorok pozícióparamétereinek használatával van beállítva. A másik két tulajdonság az olvasás/írás, és csak névvel ellátott argumentumok használatával állítható be. Az egyik pozíciótulajdonság sztringek tömbje, egy elnevezett tulajdonság pedig egész számok tömbje.
Az attribútum a szerelvényre, a szerelvényben deklarált típusra, a típus metódusára és a metódus egy paraméterére lesz alkalmazva. Ezekhez az esetekhez különböző konstruktorok használhatók. A végrehajtáskor a szerelvény betölti magát a csak tükrözési környezetbe, és megjeleníti az egyéni attribútumokat.
A típusra alkalmazott attribútum a tömbtulajdonságokat mutatja be pozíció- és elnevezett argumentumokkal.
A Constructor tulajdonságot az ShowAttributeData egyéni attribútumadatokat megjelenítő metódus használja. Ebben a kód példában a ConstructorInfo tulajdonság által visszaadott érték egy, a konstruktort leíró szöveges sztring megjelenítésére szolgál, amely azt mutatja be, hogy a tulajdonság az attribútumot inicializáló konstruktort adja vissza.
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Megjegyzések
Ha egy attribútumtípus több konstruktort tartalmaz, ez a tulajdonság csak azt az adott konstruktort adja vissza, amely inicializálta volna az aktuális CustomAttributeData objektum által képviselt attribútumpéldányt.