Szerkesztés

Megosztás a következőn keresztül:


MethodBuilder.SetSignature Method

Definition

Sets the method signature, including the return type, the parameter types, and the required and optional custom modifiers of the return type and parameter types.

public:
 void SetSignature(Type ^ returnType, cli::array <Type ^> ^ returnTypeRequiredCustomModifiers, cli::array <Type ^> ^ returnTypeOptionalCustomModifiers, cli::array <Type ^> ^ parameterTypes, cli::array <cli::array <Type ^> ^> ^ parameterTypeRequiredCustomModifiers, cli::array <cli::array <Type ^> ^> ^ parameterTypeOptionalCustomModifiers);
public void SetSignature (Type? returnType, Type[]? returnTypeRequiredCustomModifiers, Type[]? returnTypeOptionalCustomModifiers, Type[]? parameterTypes, Type[][]? parameterTypeRequiredCustomModifiers, Type[][]? parameterTypeOptionalCustomModifiers);
public void SetSignature (Type returnType, Type[] returnTypeRequiredCustomModifiers, Type[] returnTypeOptionalCustomModifiers, Type[] parameterTypes, Type[][] parameterTypeRequiredCustomModifiers, Type[][] parameterTypeOptionalCustomModifiers);
member this.SetSignature : Type * Type[] * Type[] * Type[] * Type[][] * Type[][] -> unit
Public Sub SetSignature (returnType As Type, returnTypeRequiredCustomModifiers As Type(), returnTypeOptionalCustomModifiers As Type(), parameterTypes As Type(), parameterTypeRequiredCustomModifiers As Type()(), parameterTypeOptionalCustomModifiers As Type()())

Parameters

returnType
Type

The return type of the method.

returnTypeRequiredCustomModifiers
Type[]

An array of types representing the required custom modifiers, such as IsConst, for the return type of the method. If the return type has no required custom modifiers, specify null.

returnTypeOptionalCustomModifiers
Type[]

An array of types representing the optional custom modifiers, such as IsConst, for the return type of the method. If the return type has no optional custom modifiers, specify null.

parameterTypes
Type[]

The types of the parameters of the method.

parameterTypeRequiredCustomModifiers
Type[][]

An array of arrays of types. Each array of types represents the required custom modifiers for the corresponding parameter, such as IsConst. If a particular parameter has no required custom modifiers, specify null instead of an array of types. If none of the parameters have required custom modifiers, specify null instead of an array of arrays.

parameterTypeOptionalCustomModifiers
Type[][]

An array of arrays of types. Each array of types represents the optional custom modifiers for the corresponding parameter, such as IsConst. If a particular parameter has no optional custom modifiers, specify null instead of an array of types. If none of the parameters have optional custom modifiers, specify null instead of an array of arrays.

Exceptions

The current method is generic, but is not a generic method definition. That is, the IsGenericMethod property is true, but the IsGenericMethodDefinition property is false.

Examples

The following code example contains source code for a generic class named Sample that has a type parameter T. The class has a field named Field, of type T, and a generic method GM with its own type parameter, U. Method GM creates an instance of Sample, substituting its own type parameter U for the type parameter of Sample, and stores its input parameter in Field. This source code is compiled but not used; you can view it with the Ildasm.exe (IL Disassembler), and compare it to the code emitted by class Example.

The code in class Example demonstrates the use of the SetSignature method in emitting generic code. The Main method of class Example creates a dynamic assembly containing a class named Sample, and uses the TypeBuilder.DefineGenericParameters method to make it generic by adding a type parameter named T. A parameterless constructor and a field named Field, of type T, are added to class Sample. A method GM is added, and turned into a generic method using the DefineGenericParameters method. The type parameter of GM is named U. Once the type parameter is defined, the signature of GM is added, using the SetSignature method. There is no return type, and no required or custom modifiers, so all the parameters of this method are null except parameterTypes, which sets the type of the only parameter of the method; this is set to the method's type parameter, U. The body of the method creates an instance of the constructed type Sample<U> (Sample(Of U) in Visual Basic), assigns the method's parameter to Field, and then prints the value of Field. A dummy type is defined, to hold the entry point method Main. In the body of Main, the static GM method is invoked on the constructed generic type Sample<int> (Sample(Of Integer) in Visual Basic), with type String substituted for U. The TypeBuilder.GetMethod method is used to create a MethodInfo for the static GM method of the constructed generic type Sample<U>, and the MethodInfo.MakeGenericMethod method is then used to create a MethodInfo that can emitted in a method call.

When the code example is run, it saves the emitted assembly as TypeBuilderGetFieldExample.exe. You can run TypeBuilderGetFieldExample.exe, and you can use the Ildasm.exe (IL Disassembler) to compare the emitted code with the code for the Sample class that is compiled into the code example itself.

using System;
using System.Reflection;
using System.Reflection.Emit;

// Compare the MSIL in this class to the MSIL
// generated by the Reflection.Emit code in class
// Example.
public class Sample<T>
{
  public T Field;
  public static void GM<U>(U val)
  {
    Sample<U> s = new Sample<U>();
    s.Field = val;
    Console.WriteLine(s.Field);
  }
}

public class Example
{
    public static void Main()
    {
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName =
            new AssemblyName("TypeBuilderGetFieldExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName, AssemblyBuilderAccess.Save);
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".exe");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType("Sample",
            TypeAttributes.Class | TypeAttributes.Public);

        // Add a type parameter, making the type generic.
        string[] typeParamNames = {"T"};
        GenericTypeParameterBuilder[] typeParams =
            myType.DefineGenericParameters(typeParamNames);

        // Define a default constructor. Normally it would
        // not be necessary to define the default constructor,
        // but in this case it is needed for the call to
        // TypeBuilder.GetConstructor, which gets the default
        // constructor for the generic type constructed from
        // Sample<T>, in the generic method GM<U>.
        ConstructorBuilder ctor = myType.DefineDefaultConstructor(
            MethodAttributes.PrivateScope | MethodAttributes.Public |
            MethodAttributes.HideBySig | MethodAttributes.SpecialName |
            MethodAttributes.RTSpecialName);

        // Add a field of type T, with the name Field.
        FieldBuilder myField = myType.DefineField("Field",
            typeParams[0],
            FieldAttributes.Public);

        // Add a method and make it generic, with a type
        // parameter named U. Note how similar this is to
        // the way Sample is turned into a generic type. The
        // method has no signature, because the type of its
        // only parameter is U, which is not yet defined.
        MethodBuilder genMethod = myType.DefineMethod("GM",
            MethodAttributes.Public | MethodAttributes.Static);
        string[] methodParamNames = {"U"};
        GenericTypeParameterBuilder[] methodParams =
            genMethod.DefineGenericParameters(methodParamNames);

        // Now add a signature for genMethod, specifying U
        // as the type of the parameter. There is no return value
        // and no custom modifiers.
        genMethod.SetSignature(null, null, null,
            new Type[] { methodParams[0] }, null, null);

        // Emit a method body for the generic method.
        ILGenerator ilg = genMethod.GetILGenerator();
        // Construct the type Sample<U> using MakeGenericType.
        Type SampleOfU = myType.MakeGenericType( methodParams[0] );
        // Create a local variable to store the instance of
        // Sample<U>.
        ilg.DeclareLocal(SampleOfU);
        // Call the default constructor. Note that it is
        // necessary to have the default constructor for the
        // constructed generic type Sample<U>; use the
        // TypeBuilder.GetConstructor method to obtain this
        // constructor.
        ConstructorInfo ctorOfU = TypeBuilder.GetConstructor(
            SampleOfU, ctor);
        ilg.Emit(OpCodes.Newobj, ctorOfU);
        // Store the instance in the local variable; load it
        // again, and load the parameter of genMethod.
        ilg.Emit(OpCodes.Stloc_0);
        ilg.Emit(OpCodes.Ldloc_0);
        ilg.Emit(OpCodes.Ldarg_0);
        // In order to store the value in the field of the
        // instance of Sample<U>, it is necessary to have
        // a FieldInfo representing the field of the
        // constructed type. Use TypeBuilder.GetField to
        // obtain this FieldInfo.
        FieldInfo FieldOfU = TypeBuilder.GetField(
            SampleOfU, myField);
        // Store the value in the field.
        ilg.Emit(OpCodes.Stfld, FieldOfU);
        // Load the instance, load the field value, box it
        // (specifying the type of the type parameter, U), and
        // print it.
        ilg.Emit(OpCodes.Ldloc_0);
        ilg.Emit(OpCodes.Ldfld, FieldOfU);
        ilg.Emit(OpCodes.Box, methodParams[0]);
        MethodInfo writeLineObj =
            typeof(Console).GetMethod("WriteLine",
                new Type[] { typeof(object) });
        ilg.EmitCall(OpCodes.Call, writeLineObj, null);
        ilg.Emit(OpCodes.Ret);

        // Emit an entry point method; this must be in a
        // non-generic type.
        TypeBuilder dummy = myModule.DefineType("Dummy",
            TypeAttributes.Class | TypeAttributes.NotPublic);
        MethodBuilder entryPoint = dummy.DefineMethod("Main",
            MethodAttributes.Public | MethodAttributes.Static,
            null, null);
        ilg = entryPoint.GetILGenerator();
        // In order to call the static generic method GM, it is
        // necessary to create a constructed type from the
        // generic type definition for Sample. This can be any
        // constructed type; in this case Sample<int> is used.
        Type SampleOfInt =
            myType.MakeGenericType( typeof(int) );
        // Next get a MethodInfo representing the static generic
        // method GM on type Sample<int>.
        MethodInfo SampleOfIntGM = TypeBuilder.GetMethod(SampleOfInt,
            genMethod);
        // Next get a MethodInfo for GM<string>, which is the
        // instantiation of GM that Main calls.
        MethodInfo GMOfString =
            SampleOfIntGM.MakeGenericMethod( typeof(string) );
        // Finally, emit the call. Push a string onto
        // the stack, as the argument for the generic method.
        ilg.Emit(OpCodes.Ldstr, "Hello, world!");
        ilg.EmitCall(OpCodes.Call, GMOfString, null);
        ilg.Emit(OpCodes.Ret);

        myType.CreateType();
        dummy.CreateType();
        myAssembly.SetEntryPoint(entryPoint);
        myAssembly.Save(myAsmName.Name + ".exe");

        Console.WriteLine(myAsmName.Name + ".exe has been saved.");
    }
}
Imports System.Reflection
Imports System.Reflection.Emit

' Compare the MSIL in this class to the MSIL
' generated by the Reflection.Emit code in class
' Example.
Public Class Sample(Of T)
    Public Field As T
    Public Shared Sub GM(Of U)(ByVal val As U)
        Dim s As New Sample(Of U)
        s.Field = val
        Console.WriteLine(s.Field)
    
    End Sub
End Class 

Public Class Example
    
    Public Shared Sub Main() 
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("TypeBuilderGetFieldExample")
        Dim myAssembly As AssemblyBuilder = _
            myDomain.DefineDynamicAssembly(myAsmName, _
                AssemblyBuilderAccess.Save)
        Dim myModule As ModuleBuilder = _
            myAssembly.DefineDynamicModule(myAsmName.Name, _
                myAsmName.Name & ".exe")
        
        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Class Or TypeAttributes.Public)
        
        ' Add a type parameter, making the type generic.
        Dim typeParamNames() As String = { "T" }
        Dim typeParams As GenericTypeParameterBuilder() = _
            myType.DefineGenericParameters(typeParamNames)
        
        ' Define a default constructor. Normally it would 
        ' not be necessary to define the default constructor,
        ' but in this case it is needed for the call to
        ' TypeBuilder.GetConstructor, which gets the default
        ' constructor for the generic type constructed from 
        ' Sample(Of T), in the generic method GM(Of U).
        Dim ctor As ConstructorBuilder = _
            myType.DefineDefaultConstructor( _
                MethodAttributes.PrivateScope Or MethodAttributes.Public _
                Or MethodAttributes.HideBySig Or MethodAttributes.SpecialName _
                Or MethodAttributes.RTSpecialName)
        
        ' Add a field of type T, with the name Field.
        Dim myField As FieldBuilder = myType.DefineField( _
            "Field", typeParams(0), FieldAttributes.Public)
        
        ' Add a method and make it generic, with a type 
        ' parameter named U. Note how similar this is to 
        ' the way Sample is turned into a generic type. The
        ' method has no signature, because the type of its
        ' only parameter is U, which is not yet defined.
        Dim genMethod As MethodBuilder = _
            myType.DefineMethod("GM", _
                MethodAttributes.Public Or MethodAttributes.Static)
        Dim methodParamNames() As String = { "U" }
        Dim methodParams As GenericTypeParameterBuilder() = _
            genMethod.DefineGenericParameters(methodParamNames)

        ' Now add a signature for genMethod, specifying U
        ' as the type of the parameter. There is no return value
        ' and no custom modifiers.
        genMethod.SetSignature(Nothing, Nothing, Nothing, _
            New Type() { methodParams(0) }, Nothing, Nothing)
        
        ' Emit a method body for the generic method.
        Dim ilg As ILGenerator = genMethod.GetILGenerator()
        ' Construct the type Sample(Of U) using MakeGenericType.
        Dim SampleOfU As Type = _
            myType.MakeGenericType(methodParams(0))
        ' Create a local variable to store the instance of
        ' Sample(Of U).
        ilg.DeclareLocal(SampleOfU)
        ' Call the default constructor. Note that it is 
        ' necessary to have the default constructor for the
        ' constructed generic type Sample(Of U); use the 
        ' TypeBuilder.GetConstructor method to obtain this 
        ' constructor.
        Dim ctorOfU As ConstructorInfo = _
            TypeBuilder.GetConstructor(SampleOfU, ctor)
        ilg.Emit(OpCodes.Newobj, ctorOfU)
        ' Store the instance in the local variable; load it
        ' again, and load the parameter of genMethod.
        ilg.Emit(OpCodes.Stloc_0)
        ilg.Emit(OpCodes.Ldloc_0)
        ilg.Emit(OpCodes.Ldarg_0)
        ' In order to store the value in the field of the
        ' instance of Sample(Of U), it is necessary to have 
        ' a FieldInfo representing the field of the 
        ' constructed type. Use TypeBuilder.GetField to 
        ' obtain this FieldInfo.
        Dim FieldOfU As FieldInfo = _
            TypeBuilder.GetField(SampleOfU, myField)
        ' Store the value in the field. 
        ilg.Emit(OpCodes.Stfld, FieldOfU)
        ' Load the instance, load the field value, box it
        ' (specifying the type of the type parameter, U), 
        ' and print it.
        ilg.Emit(OpCodes.Ldloc_0)
        ilg.Emit(OpCodes.Ldfld, FieldOfU)
        ilg.Emit(OpCodes.Box, methodParams(0))
        Dim writeLineObj As MethodInfo = _
            GetType(Console).GetMethod("WriteLine", _
                New Type() {GetType(Object)})
        ilg.EmitCall(OpCodes.Call, writeLineObj, Nothing)
        ilg.Emit(OpCodes.Ret)
        
        ' Emit an entry point method; this must be in a
        ' non-generic type.
        Dim dummy As TypeBuilder = _
            myModule.DefineType("Dummy", _
                TypeAttributes.Class Or TypeAttributes.NotPublic)
        Dim entryPoint As MethodBuilder = _
            dummy.DefineMethod("Main", _
                MethodAttributes.Public Or MethodAttributes.Static, _
                Nothing, Nothing)
        ilg = entryPoint.GetILGenerator()
        ' In order to call the static generic method GM, it is
        ' necessary to create a constructed type from the 
        ' generic type definition for Sample. This can be ANY
        ' constructed type; in this case Sample(Of Integer)
        ' is used.
        Dim SampleOfInt As Type = _
            myType.MakeGenericType(GetType(Integer))
        ' Next get a MethodInfo representing the static generic
        ' method GM on type Sample(Of Integer).
        Dim SampleOfIntGM As MethodInfo = _
            TypeBuilder.GetMethod(SampleOfInt, genMethod)
        ' Next get a MethodInfo for GM(Of String), which is the 
        ' instantiation of generic method GM that is called
        ' by Sub Main.
        Dim GMOfString As MethodInfo = _
            SampleOfIntGM.MakeGenericMethod(GetType(String))
        ' Finally, emit the call. Push a string onto
        ' the stack, as the argument for the generic method.
        ilg.Emit(OpCodes.Ldstr, "Hello, world!")
        ilg.EmitCall(OpCodes.Call, GMOfString, Nothing)
        ilg.Emit(OpCodes.Ret)
        
        myType.CreateType()
        dummy.CreateType()
        myAssembly.SetEntryPoint(entryPoint)
        myAssembly.Save(myAsmName.Name & ".exe")
        
        Console.WriteLine(myAsmName.Name & ".exe has been saved.")
    
    End Sub 
End Class

Remarks

If the return type and the number and types of the parameters are known when the method is defined, they can be established using any overload of the TypeBuilder.DefineMethod method that accepts an array of parameter types. However, a generic method can have parameters whose types are specified by one or more of its own generic type parameters, which cannot be defined until after the method has been defined. Use this method to set the parameter types in that case.

If neither the return type nor the parameter types have optional or required custom modifiers, such as IsConstModifier, you can use the SetReturnType and SetParameters methods.

Calling this method replaces the parameters and return type established using the TypeBuilder.DefineMethod method.

Applies to

See also