AppDomain.DynamicDirectory Properti

Definisi

Ruang nama:

System

Rakitan:

netstandard.dll, System.Runtime.dll

Sumber:

AppDomain.cs

Mendapatkan direktori yang digunakan penyelesai rakitan untuk menyelidiki rakitan yang dibuat secara dinamis.

public:
 property System::String ^ DynamicDirectory { System::String ^ get(); };

public string? DynamicDirectory { get; }

member this.DynamicDirectory : string

Public ReadOnly Property DynamicDirectory As String

Nilai Properti

String

Direktori yang digunakan resolver assembly untuk memeriksa rakitan yang dibuat secara dinamis.

Pengecualian

AppDomainUnloadedException

Operasi ini dicoba pada domain aplikasi yang tidak dimuat.

Contoh

Contoh berikut membuat domain aplikasi dengan direktori untuk rakitan dinamis, memancarkan rakitan dinamis dan menyimpannya di direktori dinamis, lalu memuat rakitan ke domain aplikasi baru dan menggunakannya.

Contoh membuat AppDomainSetup objek dan mengatur propertinya ApplicationName ke "Contoh" dan propertinya DynamicBase ke "C:\DynamicAssemblyDir". Contoh kemudian menampilkan DynamicBase properti , untuk menunjukkan bahwa kode hash nama aplikasi telah ditambahkan sebagai subdirektori jalur yang awalnya ditetapkan.

Nota

Direktori dasar dalam contoh ini dimaksudkan untuk berada di luar jalur pemeriksaan untuk aplikasi contoh. Pastikan untuk mengkompilasi contoh di lokasi yang berbeda. Hapus direktori dasar dan semua subdirektorinya setiap kali Anda menjalankan contoh.

Contoh membuat domain aplikasi baru, menggunakan AppDomainSetup objek . Contoh menggunakan DynamicDirectory properti untuk mengambil nama direktori, sehingga dapat membuat direktori. (Contohnya bisa dengan mudah membuat direktori sebelumnya dengan menggabungkan jalur asli, kode hash nama aplikasi, dan nama aplikasi.)

Contoh memiliki GenerateDynamicAssembly metode yang memancarkan rakitan bernama DynamicHelloWorld.dll dan menyimpannya di direktori dinamis domain aplikasi baru. Rakitan dinamis berisi satu jenis, HelloWorld, yang memiliki metode statis (Shared metode di Visual Basic) bernama HelloFromAD. Memanggil metode ini menampilkan nama domain aplikasi.

Kelas Example berasal dari MarshalByRefObject, sehingga contoh dapat membuat instans kelas di domain aplikasi baru dan memanggil metodenya Test . Metode memuat Test rakitan dinamis dengan nama tampilannya dan memanggil metode statis HelloFromAD .

Anda dapat menunjukkan bahwa direktori dinamis dicari setelah jalur pemeriksaan normal dengan menulis kode untuk rakitan bernama DynamicHelloWorld.dll dan mengkompilasinya dalam direktori yang sama dengan contoh ini. Rakitan harus memiliki kelas bernama HelloWorld dengan metode statis bernama HelloFromAD. Metode ini tidak harus memiliki fungsionalitas yang sama dengan yang ada dalam contoh; itu hanya dapat menampilkan string ke konsol. Rakitan juga harus memiliki AssemblyVersionAttribute atribut yang mengatur versinya ke 1.0.0.0. Saat Anda menjalankan contoh, rakitan yang Anda kompilasi di direktori saat ini ditemukan sebelum direktori dinamis dicari.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;

public ref class Example : MarshalByRefObject
{
public:
   void Test()
   {
      Assembly^ dynAssem = Assembly::Load(
         "DynamicHelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null");

      Type^ myType = dynAssem->GetType("HelloWorld");
      myType->InvokeMember("HelloFromAD", BindingFlags::Public | 
         BindingFlags::Static | BindingFlags::InvokeMethod, 
         Type::DefaultBinder, nullptr, nullptr);
   }
};


static void GenerateDynamicAssembly(String^ location)
{
   // Define the dynamic assembly and the module. There is only one
   // module in this assembly. Note that the call to DefineDynamicAssembly 
   // specifies the location where the assembly will be saved. The 
   // assembly version is 1.0.0.0.
   //
   AssemblyName^ asmName = gcnew AssemblyName("DynamicHelloWorld");
   asmName->Version = gcnew Version("1.0.0.0");

   AssemblyBuilder^ ab = 
      AppDomain::CurrentDomain->DefineDynamicAssembly( 
         asmName, AssemblyBuilderAccess::Save, location);

   String^ moduleName = asmName->Name + ".exe";
   ModuleBuilder^ mb = ab->DefineDynamicModule(asmName->Name, moduleName);
   
   // Define the "HelloWorld" type, with one static method.
   TypeBuilder^ tb = mb->DefineType("HelloWorld", TypeAttributes::Public);
   MethodBuilder^ hello = tb->DefineMethod("HelloFromAD", 
      MethodAttributes::Public | MethodAttributes::Static, nullptr, nullptr);

   // The method displays a message that contains the name of the application
   // domain where the method is executed.
   ILGenerator^ il = hello->GetILGenerator();
   il->Emit(OpCodes::Ldstr, "Hello from '{0}'!");
   il->Emit(OpCodes::Call, AppDomain::typeid->GetProperty("CurrentDomain")->GetGetMethod());
   il->Emit(OpCodes::Call, AppDomain::typeid->GetProperty("FriendlyName")->GetGetMethod());
   il->Emit(OpCodes::Call, Console::typeid->GetMethod("WriteLine", 
                            gcnew array<Type^> { String::typeid, String::typeid }));
   il->Emit(OpCodes::Ret);

   // Complete the HelloWorld type and save the assembly. The assembly
   // is placed in the location specified by DefineDynamicAssembly.
   Type^ myType = tb->CreateType();
   ab->Save(moduleName);
};

void main()
{
   // Prepare to create a new application domain.
   AppDomainSetup^ setup = gcnew AppDomainSetup();

   // Set the application name before setting the dynamic base.
   setup->ApplicationName = "Example";
   
   // Set the location of the base directory where assembly resolution 
   // probes for dynamic assemblies. Note that the hash code of the 
   // application name is concatenated to the base directory name you 
   // supply. 
   setup->DynamicBase = "C:\\DynamicAssemblyDir";
   Console::WriteLine("DynamicBase is set to '{0}'.", setup->DynamicBase);

   AppDomain^ ad = AppDomain::CreateDomain("MyDomain", nullptr, setup);
   
   // The dynamic directory name is the dynamic base concatenated with
   // the application name: <DynamicBase>\<hash code>\<ApplicationName>
   String^ dynamicDir = ad->DynamicDirectory;
   Console::WriteLine("Dynamic directory is '{0}'.", dynamicDir);

   // The AssemblyBuilder won't create this directory automatically.
   if (!System::IO::Directory::Exists(dynamicDir))
   {
      Console::WriteLine("Creating the dynamic directory.");
      System::IO::Directory::CreateDirectory(dynamicDir);
   }

   // Generate a dynamic assembly and store it in the dynamic 
   // directory.
   GenerateDynamicAssembly(dynamicDir);

   // Create an instance of the Example class in the application domain,
   // and call its Test method to load the dynamic assembly and use it.
   Example^ ex = (Example^) ad->CreateInstanceAndUnwrap( 
         Example::typeid->Assembly->FullName, "Example");
   ex->Test();
}

/* This example produces output similar to the following:

DynamicBase is set to 'C:\DynamicAssemblyDir\5e4a7545'.
Dynamic directory is 'C:\DynamicAssemblyDir\5e4a7545\Example'.
Creating the dynamic directory.
Hello from 'MyDomain'!
 */

using System;
using System.Reflection;
using System.Reflection.Emit;

public class AddDynamicBaseSnippet : MarshalByRefObject
{
   static void Main()
   {
      // Prepare to create a new application domain.
      AppDomainSetup setup = new AppDomainSetup();

      // Set the application name before setting the dynamic base.
      setup.ApplicationName = "Example";

      // Set the location of the base directory where assembly resolution
      // probes for dynamic assemblies. Note that the hash code of the
      // application name is concatenated to the base directory name you
      // supply.
      setup.DynamicBase = "C:\\DynamicAssemblyDir";
      Console.WriteLine("DynamicBase is set to '{0}'.", setup.DynamicBase);

      AppDomain ad = AppDomain.CreateDomain("MyDomain", null, setup);

      // The dynamic directory name is the dynamic base concatenated with
      // the application name: <DynamicBase>\<hash code>\<ApplicationName>
      string dynamicDir = ad.DynamicDirectory;
      Console.WriteLine("Dynamic directory is '{0}'.", dynamicDir);

      // The AssemblyBuilder won't create this directory automatically.
      if (!System.IO.Directory.Exists(dynamicDir))
      {
         Console.WriteLine("Creating the dynamic directory.");
         System.IO.Directory.CreateDirectory(dynamicDir);
      }

      // Generate a dynamic assembly and store it in the dynamic
      // directory.
      GenerateDynamicAssembly(dynamicDir);

      // Create an instance of the Example class in the application domain,
      // and call its Test method to load the dynamic assembly and use it.
      AddDynamicBaseSnippet ex = (AddDynamicBaseSnippet) ad.CreateInstanceAndUnwrap(
         typeof(AddDynamicBaseSnippet).Assembly.FullName, "Example");
      ex.Test();
   }

   public void Test()
   {
      Assembly dynAssem = Assembly.Load(
         "DynamicHelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null");

      Type myType = dynAssem.GetType("HelloWorld");
      myType.InvokeMember("HelloFromAD", BindingFlags.Public |
         BindingFlags.Static | BindingFlags.InvokeMethod,
         Type.DefaultBinder, null, null);
   }

   private static void GenerateDynamicAssembly(string location)
   {
      // Define the dynamic assembly and the module. There is only one
      // module in this assembly. Note that the call to DefineDynamicAssembly
      // specifies the location where the assembly will be saved. The
      // assembly version is 1.0.0.0.
      //
      AssemblyName asmName = new AssemblyName("DynamicHelloWorld");
      asmName.Version = new Version("1.0.0.0");

      AssemblyBuilder ab =
         AppDomain.CurrentDomain.DefineDynamicAssembly(
            asmName, AssemblyBuilderAccess.Save, location);

      String moduleName = asmName.Name + ".exe";
      ModuleBuilder mb = ab.DefineDynamicModule(asmName.Name, moduleName);

      // Define the "HelloWorld" type, with one static method.
      TypeBuilder tb = mb.DefineType("HelloWorld", TypeAttributes.Public);
      MethodBuilder hello = tb.DefineMethod("HelloFromAD",
         MethodAttributes.Public | MethodAttributes.Static, null, null);

      // The method displays a message that contains the name of the application
      // domain where the method is executed.
      ILGenerator il = hello.GetILGenerator();
      il.Emit(OpCodes.Ldstr, "Hello from '{0}'!");
      il.Emit(OpCodes.Call, typeof(AppDomain).GetProperty("CurrentDomain").GetGetMethod());
      il.Emit(OpCodes.Call, typeof(AppDomain).GetProperty("FriendlyName").GetGetMethod());
      il.Emit(OpCodes.Call, typeof(Console).GetMethod("WriteLine",
                             new Type[] { typeof(String), typeof(String) }));
      il.Emit(OpCodes.Ret);

      // Complete the HelloWorld type and save the assembly. The assembly
      // is placed in the location specified by DefineDynamicAssembly.
      Type myType = tb.CreateType();
      ab.Save(moduleName);
   }
}

/* This example produces output similar to the following:

DynamicBase is set to 'C:\DynamicAssemblyDir\5e4a7545'.
Dynamic directory is 'C:\DynamicAssemblyDir\5e4a7545\Example'.
Creating the dynamic directory.
Hello from 'MyDomain'!
 */

open System
open System.Reflection
open System.Reflection.Emit

type Example() =
    inherit MarshalByRefObject()
    member _.Test() =
        let dynAssem = 
            Assembly.Load "DynamicHelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"

        let myType = dynAssem.GetType "HelloWorld"
        myType.InvokeMember("HelloFromAD", BindingFlags.Public |||
            BindingFlags.Static ||| BindingFlags.InvokeMethod,
            Type.DefaultBinder, null, null)
        |> ignore

    static member GenerateDynamicAssembly(location: string) =
        // Define the dynamic assembly and the module. There is only one
        // module in this assembly. Note that the call to DefineDynamicAssembly
        // specifies the location where the assembly will be saved. The
        // assembly version is 1.0.0.0.
        let asmName = AssemblyName "DynamicHelloWorld"
        asmName.Version <- Version "1.0.0.0"

        let ab = AppDomain.CurrentDomain.DefineDynamicAssembly(asmName, AssemblyBuilderAccess.Save, location)

        let moduleName = asmName.Name + ".exe"
        let mb = ab.DefineDynamicModule(asmName.Name, moduleName)

        // Define the "HelloWorld" type, with one static method.
        let tb = mb.DefineType("HelloWorld", TypeAttributes.Public)
        let hello = 
            tb.DefineMethod("HelloFromAD", MethodAttributes.Public ||| MethodAttributes.Static, null, null)

        // The method displays a message that contains the name of the application
        // domain where the method is executed.
        let il = hello.GetILGenerator()
        il.Emit(OpCodes.Ldstr, "Hello from '{0}'!")
        il.Emit(OpCodes.Call, typeof<AppDomain>.GetProperty("CurrentDomain").GetGetMethod())
        il.Emit(OpCodes.Call, typeof<AppDomain>.GetProperty("FriendlyName").GetGetMethod())
        il.Emit(OpCodes.Call, typeof<Console>.GetMethod("WriteLine", [| typeof<string>; typeof<String> |]))
        il.Emit OpCodes.Ret

        // Complete the HelloWorld type and save the assembly. The assembly
        // is placed in the location specified by DefineDynamicAssembly.
        let myType = tb.CreateType()
        ab.Save moduleName

// Prepare to create a new application domain.
let setup = AppDomainSetup()

// Set the application name before setting the dynamic base.
setup.ApplicationName <- "Example"

// Set the location of the base directory where assembly resolution
// probes for dynamic assemblies. Note that the hash code of the
// application name is concatenated to the base directory name you
// supply.
setup.DynamicBase <- "C:\\DynamicAssemblyDir"
printfn $"DynamicBase is set to '{setup.DynamicBase}'."

let ad = AppDomain.CreateDomain("MyDomain", null, setup)

// The dynamic directory name is the dynamic base concatenated with
// the application name: <DynamicBase>\<hash code>\<ApplicationName>
let dynamicDir = ad.DynamicDirectory
printfn $"Dynamic directory is '{dynamicDir}'."

// The AssemblyBuilder won't create this directory automatically.
if not (System.IO.Directory.Exists dynamicDir) then
    printfn "Creating the dynamic directory."
    System.IO.Directory.CreateDirectory dynamicDir
    |> ignore

// Generate a dynamic assembly and store it in the dynamic
// directory.
Example.GenerateDynamicAssembly dynamicDir

// Create an instance of the Example class in the application domain,
// and call its Test method to load the dynamic assembly and use it.
let ex = ad.CreateInstanceAndUnwrap(typeof<Example>.Assembly.FullName, "Example") :?> Example
ex.Test()

(* This example produces output similar to the following:

DynamicBase is set to 'C:\DynamicAssemblyDir\5e4a7545'.
Dynamic directory is 'C:\DynamicAssemblyDir\5e4a7545\Example'.
Creating the dynamic directory.
Hello from 'MyDomain'!
 *)

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example 
   Inherits MarshalByRefObject
   
   Shared Sub Main(args() As String)

      ' Prepare to create a new application domain.
      Dim setup As New AppDomainSetup()

      ' Set the application name before setting the dynamic base.
      setup.ApplicationName = "Example"
      
      ' Set the location of the base directory where assembly resolution 
      ' probes for dynamic assemblies. Note that the hash code of the 
      ' application name is concatenated to the base directory name you 
      ' supply. 
      setup.DynamicBase = "C:\DynamicAssemblyDir"
      Console.WriteLine("DynamicBase is set to '{0}'.", setup.DynamicBase)

      Dim ad As AppDomain = AppDomain.CreateDomain("MyDomain", Nothing, setup)
      
      ' The dynamic directory name is the dynamic base concatenated with
      ' the application name: <DynamicBase>\<hash code>\<ApplicationName>
      Dim dynamicDir As String = ad.DynamicDirectory 
      Console.WriteLine("Dynamic directory is '{0}'.", dynamicDir)

      ' The AssemblyBuilder won't create this directory automatically.
      If Not System.IO.Directory.Exists(dynamicDir) Then 
         Console.WriteLine("Creating the dynamic directory.")
         System.IO.Directory.CreateDirectory(dynamicDir)
      End If

      ' Generate a dynamic assembly and store it in the dynamic 
      ' directory.
      GenerateDynamicAssembly(dynamicDir) 

      ' Create an instance of the Example class in the application domain,
      ' and call its Test method to load the dynamic assembly and use it.  
      Dim ex As Example = CType( _
         ad.CreateInstanceAndUnwrap( _
            GetType(Example).Assembly.FullName, "Example"), Example)
      ex.Test()
   End Sub

   Public Sub Test() 

      Dim dynAssem As [Assembly] = Assembly.Load(
         "DynamicHelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null")

      Dim myType As Type = dynAssem.GetType("HelloWorld")
      myType.InvokeMember("HelloFromAD", BindingFlags.Public Or _
         BindingFlags.Static Or BindingFlags.InvokeMethod, _
         Type.DefaultBinder, Nothing, Nothing) 'New Object() {})
   End Sub


   Private Shared Sub GenerateDynamicAssembly(ByVal location As String)
      
      ' Define the dynamic assembly and the module. There is only one
      ' module in this assembly. Note that the call to DefineDynamicAssembly 
      ' specifies the location where the assembly will be saved. The 
      ' assembly version is 1.0.0.0.
      '
      Dim asmName As New AssemblyName("DynamicHelloWorld")
      asmName.Version = New Version("1.0.0.0")

      Dim ab As AssemblyBuilder = _
         AppDomain.CurrentDomain.DefineDynamicAssembly( _
            asmName, AssemblyBuilderAccess.Save, location)

      Dim moduleName As String = asmName.Name & ".dll"
      Dim mb As ModuleBuilder = ab.DefineDynamicModule(asmName.Name, moduleName)
      
      ' Define the "HelloWorld" type, with one static method.
      Dim tb As TypeBuilder = mb.DefineType("HelloWorld", TypeAttributes.Public)
      Dim hello As MethodBuilder = tb.DefineMethod("HelloFromAD", _
         MethodAttributes.Public Or MethodAttributes.Static, Nothing, Nothing)

      ' The method displays a message that contains the name of the application
      ' domain where the method is executed.
      Dim il As ILGenerator = hello.GetILGenerator()
      il.Emit(OpCodes.Ldstr, "Hello from '{0}'!")
      il.Emit(OpCodes.Call, GetType(AppDomain).GetProperty("CurrentDomain").GetGetMethod())
      il.Emit(OpCodes.Call, GetType(AppDomain).GetProperty("FriendlyName").GetGetMethod())
      il.Emit(OpCodes.Call, GetType(Console).GetMethod("WriteLine", _
                             New Type() { GetType(String), GetType(String) }))
      il.Emit(OpCodes.Ret)

      ' Complete the HelloWorld type and save the assembly. The assembly
      ' is placed in the location specified by DefineDynamicAssembly.
      Dim myType As Type = tb.CreateType()
      ab.Save(moduleName)
   End Sub
End Class 

' This example produces output similar to the following:
'
'DynamicBase is set to 'C:\DynamicAssemblyDir\5e4a7545'.
'Dynamic directory is 'C:\DynamicAssemblyDir\5e4a7545\Example'.
'Creating the dynamic directory.
'Hello from 'MyDomain'!

Keterangan

Untuk mengatur direktori dinamis, tetapkan jalur direktori dasar ke AppDomainSetup.DynamicBase properti AppDomainSetup objek yang akan digunakan untuk membuat domain aplikasi baru. Jalur direktori dasar yang Anda tetapkan ke properti dimodifikasi oleh penambahan subdirektori yang nama sederhananya adalah kode hash string yang Anda tetapkan ke AppDomainSetup.ApplicationName properti, sehingga format direktori dasar adalahkode hashjalur\ asli. Direktori dinamis adalah subdirektori dari direktori dasar ini. Nama sederhananya adalah nilai AppDomainSetup.ApplicationName properti, jadi formatnya adalahnama aplikasikode\ hash jalur\ asli.