Bagikan melalui


DesignerOptionService Kelas

Definisi

Menyediakan kelas dasar untuk mendapatkan dan mengatur nilai opsi untuk perancang.

public ref class DesignerOptionService abstract : System::ComponentModel::Design::IDesignerOptionService
public abstract class DesignerOptionService : System.ComponentModel.Design.IDesignerOptionService
type DesignerOptionService = class
    interface IDesignerOptionService
Public MustInherit Class DesignerOptionService
Implements IDesignerOptionService
Warisan
DesignerOptionService
Turunan
Penerapan

Contoh

Contoh kode berikut menunjukkan mengakses DesignerOptionService untuk menampilkan nilai opsi standar saat ini.

using System;
using System.Collections;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Drawing;
using System.Data;
using System.Windows.Forms;
using System.Windows.Forms.Design;

namespace DesignerOptionServiceExample
{
    // This control demonstrates retrieving the standard 
    // designer option service values in design mode.
    public class DesignerOptionServiceControl : System.Windows.Forms.UserControl
    {		
        private DesignerOptionService designerOptionSvc;

        public DesignerOptionServiceControl()
        {
            this.BackColor = Color.Beige;
                    this.Size = new Size(404, 135);
        }
        
        public override System.ComponentModel.ISite Site
        {
            get
            {
                return base.Site;
            }
            set
            {
                base.Site = value;

                // If siting component, attempt to obtain an DesignerOptionService.
                if( base.Site != null )                            
                    designerOptionSvc = (DesignerOptionService)this.GetService(typeof(DesignerOptionService));                                   
            }
        }

        // Displays control information and current DesignerOptionService 
        // values, if available.
        protected override void OnPaint(System.Windows.Forms.PaintEventArgs e)
        {
            e.Graphics.DrawString("DesignerOptionServiceControl", 
                new Font("Arial", 9), 
                new SolidBrush(Color.Blue), 4, 4);

            if( this.DesignMode )
                e.Graphics.DrawString("Currently in design mode", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, 18);
            else
                e.Graphics.DrawString("Not in design mode. Cannot access DesignerOptionService.", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Red), 4, 18);
            
            if( base.Site != null && designerOptionSvc != null )
            {
                e.Graphics.DrawString("DesignerOptionService provides access to the table of option values listed when", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, 38);

                e.Graphics.DrawString("the Windows Forms Designer\\General tab of the Tools\\Options menu is selected.", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, 50);                
                
                e.Graphics.DrawString("Table of standard value names and current values", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Red), 4, 76);
                
                // Displays a table of the standard value names and current values.
                int ypos = 90;

                // Obtains and shows the size of the standard design-mode grid square.
                PropertyDescriptor pd;
                pd = designerOptionSvc.Options.Properties["GridSize"];
                e.Graphics.DrawString("GridSize", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(), 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 200, ypos);
                ypos += 12;

                // Uncomment the following code to demonstrate that this
                // alternate syntax works the same as the previous syntax.

                //pd = designerOptionSvc.Options["WindowsFormsDesigner"].Properties["GridSize"];
                //e.Graphics.DrawString("GridSize",
                //    new Font("Arial", 8),
                //    new SolidBrush(Color.Black), 4, ypos);
                //e.Graphics.DrawString(pd.GetValue(null).ToString(),
                //    new Font("Arial", 8),
                //    new SolidBrush(Color.Black), 200, ypos);
                //ypos += 12;

                //pd = designerOptionSvc.Options["WindowsFormsDesigner"]["General"].Properties["GridSize"];
                //e.Graphics.DrawString("GridSize",
                //    new Font("Arial", 8),
                //    new SolidBrush(Color.Black), 4, ypos);
                //e.Graphics.DrawString(pd.GetValue(null).ToString(),
                //    new Font("Arial", 8),
                //    new SolidBrush(Color.Black), 200, ypos);
                //ypos += 12;
                
                // Obtains and shows whether the design mode surface grid is enabled.
                pd = designerOptionSvc.Options.Properties["ShowGrid"];
                e.Graphics.DrawString("ShowGrid", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(), 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 200, ypos);
                ypos+=12;
                
                // Obtains and shows whether components should be aligned with the surface grid.
                pd = designerOptionSvc.Options.Properties["SnapToGrid"];
                e.Graphics.DrawString("SnapToGrid", 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(), 
                    new Font("Arial", 8), 
                    new SolidBrush(Color.Black), 200, ypos);
                ypos += 12;

                // Obtains and shows which layout mode is selected.
                pd = designerOptionSvc.Options.Properties["LayoutMode"];
                e.Graphics.DrawString("LayoutMode",
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(),
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 200, ypos);
                ypos += 12;

                // Obtains and shows whether the Toolbox is automatoically
                // populated with custom controls and components.
                pd = designerOptionSvc.Options.Properties["AutoToolboxPopulate"];
                e.Graphics.DrawString("AutoToolboxPopulate",
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(),
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 200, ypos);
                ypos += 12;

                // Obtains and shows whether the component cache is used.
                pd = designerOptionSvc.Options.Properties["UseOptimizedCodeGeneration"];
                e.Graphics.DrawString("Optimized Code Generation",
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(),
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 200, ypos);
                ypos += 12;

                // Obtains and shows whether designer actions are automatically opened.
                pd = designerOptionSvc.Options.Properties["ObjectBoundSmartTagAutoShow"];
                e.Graphics.DrawString("Automatically Open Designer Actions",
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 4, ypos);
                e.Graphics.DrawString(pd.GetValue(null).ToString(),
                    new Font("Arial", 8),
                    new SolidBrush(Color.Black), 200, ypos);
            }
        }
    }
}
Imports System.Collections
Imports System.ComponentModel
Imports System.ComponentModel.Design
Imports System.Drawing
Imports System.Data
Imports System.Windows.Forms
Imports System.Windows.Forms.Design


' This control demonstrates retrieving the standard 
' designer option service values in design mode.

Public Class DesignerOptionServiceControl
   Inherits System.Windows.Forms.UserControl
   Private designerOptionSvc As DesignerOptionService
   
   
   Public Sub New()
      Me.BackColor = Color.Beige
      Me.Size = New Size(404, 135)
    End Sub
   
   
   Public Overrides Property Site() As System.ComponentModel.ISite
      Get
         Return MyBase.Site
      End Get
      Set
         MyBase.Site = value
         
         ' If siting component, attempt to obtain an DesignerOptionService.
         If (MyBase.Site IsNot Nothing) Then
            designerOptionSvc = CType(Me.GetService(GetType(DesignerOptionService)), DesignerOptionService)
         End If
      End Set
   End Property
    
   ' Displays control information and current DesignerOptionService 
   ' values, if available.
   Protected Overrides Sub OnPaint(e As System.Windows.Forms.PaintEventArgs)
        e.Graphics.DrawString("DesignerOptionServiceControl", _
        New Font("Arial", 9), _
        New SolidBrush(Color.Blue), 4, 4)
      
      If Me.DesignMode Then
            e.Graphics.DrawString("Currently in design mode", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, 18)
      Else
            e.Graphics.DrawString("Not in design mode. Cannot access DesignerOptionService.", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Red), 4, 18)
      End If
      
      If (MyBase.Site IsNot Nothing) AndAlso (designerOptionSvc IsNot Nothing) Then
            e.Graphics.DrawString("DesignerOptionService provides access to the table of option values listed when", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, 38)

            e.Graphics.DrawString("the Windows Forms Designer\General tab of the Tools\Options menu is selected.", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, 50)

            e.Graphics.DrawString("Table of standard value names and current values", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Red), 4, 76)

            ' Displays a table of the standard value names and current values.
            Dim ypos As Integer = 90

            ' Obtains and shows the size of the standard design-mode grid square.
            Dim pd As PropertyDescriptor
            pd = designerOptionSvc.Options.Properties("GridSize")

            e.Graphics.DrawString("GridSize", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Uncomment the following code to demonstrate that this
            ' alternate syntax works the same as the previous syntax.
            'pd = designerOptionSvc.Options["WindowsFormsDesigner"].Properties["GridSize"];
            'e.Graphics.DrawString("GridSize",
            '    new Font("Arial", 8),
            '    new SolidBrush(Color.Black), 4, ypos);
            'e.Graphics.DrawString(pd.GetValue(null).ToString(),
            '    new Font("Arial", 8),
            '    new SolidBrush(Color.Black), 200, ypos);
            'ypos += 12;
            'pd = designerOptionSvc.Options["WindowsFormsDesigner"]["General"].Properties["GridSize"];
            'e.Graphics.DrawString("GridSize",
            '    new Font("Arial", 8),
            '    new SolidBrush(Color.Black), 4, ypos);
            'e.Graphics.DrawString(pd.GetValue(null).ToString(),
            '    new Font("Arial", 8),
            '    new SolidBrush(Color.Black), 200, ypos);
            'ypos += 12;

            ' Obtains and shows whether the design mode surface grid is enabled.
            pd = designerOptionSvc.Options.Properties("ShowGrid")

            e.Graphics.DrawString("ShowGrid", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Obtains and shows whether components should be aligned with the surface grid.
            pd = designerOptionSvc.Options.Properties("SnapToGrid")

            e.Graphics.DrawString("SnapToGrid", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Obtains and shows which layout mode is selected.
            pd = designerOptionSvc.Options.Properties("LayoutMode")

            e.Graphics.DrawString("LayoutMode", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Obtains and shows whether the Toolbox is automatoically
            ' populated with custom controls and components.
            pd = designerOptionSvc.Options.Properties("AutoToolboxPopulate")

            e.Graphics.DrawString("AutoToolboxPopulate", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Obtains and shows whether the component cache is used.
            pd = designerOptionSvc.Options.Properties("UseOptimizedCodeGeneration")

            e.Graphics.DrawString("Optimized Code Generation", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)

            ypos += 12

            ' Obtains and shows whether designer actions are automatically opened.
            pd = designerOptionSvc.Options.Properties("ObjectBoundSmartTagAutoShow")

            e.Graphics.DrawString("Automatically Open Designer Actions", _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 4, ypos)

            e.Graphics.DrawString(pd.GetValue(Nothing).ToString(), _
            New Font("Arial", 8), _
            New SolidBrush(Color.Black), 200, ypos)
      End If
    End Sub
End Class

Keterangan

Kelas ini DesignerOptionService menyediakan kumpulan opsi. Masing-masing koleksi opsi ini memiliki pengindeks yang memungkinkannya difilter lebih lanjut. Setiap koleksi opsi berisi serangkaian opsinya sendiri, serta rollup dari semua opsi turunannya. Jika terjadi konflik penamaan antar properti, objek opsi terluar diutamakan. Alat berikut | Struktur antarmuka pengguna opsi (UI) menunjukkan bagaimana objek opsi terluar mengambil kepentingan yang lebih besar:

WindowsFormsDesigner | Umum

  • SnapToGrid

  • ShowGrid

  • Ukuran Kisi

IDesignerOptionService Diberi nama service, untuk mendapatkan nilai GridSize properti , Anda akan melakukan panggilan berikut:

// Obtains and shows the size of the standard design-mode grid square.
System::Drawing::Size size =  *dynamic_cast<System::Drawing::Size^>(designerOptionService->GetOptionValue( "WindowsFormsDesigner\\General", "GridSize" ));
// Obtains and shows the size of the standard design-mode grid square.
Size size = (Size)designerOptionService.GetOptionValue("WindowsFormsDesigner\\General", "GridSize");
' Obtains and shows the size of the standard design-mode grid square.
Dim size As Size = CType(designerOptionService.GetOptionValue("WindowsFormsDesigner\General", "GridSize"), Size)

Ini berfungsi, sampai Anda ingin pindah GridSize ke halaman lain. Selain itu, IDesignerOptionService tidak menyediakan mekanisme penemuan. Jika Anda tidak tahu string apa yang akan diteruskan, layanan tidak dapat menemukan nilai properti.

Kelas DesignerOptionService mengatasi masalah ini. Anda bisa mengkueri koleksi, dan ada pengonversi jenis yang ditentukan pada DesignerOptionService.DesignerOptionCollection objek yang menandai koleksi sebagai dapat diperluas. Dengan pengonversi jenis ini, Anda dapat meneruskan seluruh layanan opsi perancang ke jendela properti dan memeriksa layanan secara visual.

Konstruktor

DesignerOptionService()

Menginisialisasi instans baru kelas DesignerOptionService.

Properti

Options

Mendapatkan koleksi opsi untuk layanan ini.

Metode

CreateOptionCollection(DesignerOptionService+DesignerOptionCollection, String, Object)

Membuat baru DesignerOptionService.DesignerOptionCollection dengan nama yang diberikan dan menambahkannya ke induk yang diberikan.

Equals(Object)

Menentukan apakah objek yang ditentukan sama dengan objek saat ini.

(Diperoleh dari Object)
GetHashCode()

Berfungsi sebagai fungsi hash default.

(Diperoleh dari Object)
GetType()

Mendapatkan dari instans Type saat ini.

(Diperoleh dari Object)
MemberwiseClone()

Membuat salinan dangkal dari saat ini Object.

(Diperoleh dari Object)
PopulateOptionCollection(DesignerOptionService+DesignerOptionCollection)

Mengisi DesignerOptionService.DesignerOptionCollection.

ShowDialog(DesignerOptionService+DesignerOptionCollection, Object)

Memperlihatkan kotak dialog opsi untuk objek yang diberikan.

ToString()

Mengembalikan string yang mewakili objek saat ini.

(Diperoleh dari Object)

Implementasi Antarmuka Eksplisit

IDesignerOptionService.GetOptionValue(String, String)

Mendapatkan nilai opsi yang ditentukan dalam paket ini.

IDesignerOptionService.SetOptionValue(String, String, Object)

Mengatur nilai opsi yang ditentukan dalam paket ini.

Berlaku untuk

Lihat juga