Bagikan melalui


Debug.Write Metode

Definisi

Menulis informasi tentang debug ke pendengar jejak dalam koleksi Listeners.

Overload

Write(String, String)

Menulis nama kategori dan pesan ke pendengar pelacakan dalam koleksi Listeners.

Write(Object, String)

Menulis nama kategori dan nilai metode ToString() objek ke pendengar jejak dalam koleksi Listeners.

Write(String)

Menulis pesan ke pendengar jejak dalam koleksi Listeners.

Write(Object)

Menulis nilai metode ToString() objek ke pendengar jejak dalam koleksi Listeners.

Write(String, String)

Sumber:
Debug.cs
Sumber:
Debug.cs
Sumber:
Debug.cs

Menulis nama kategori dan pesan ke pendengar pelacakan dalam koleksi Listeners.

public:
 static void Write(System::String ^ message, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string message, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string? message, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : string * string -> unit
Public Shared Sub Write (message As String, category As String)

Parameter

message
String

Pesan untuk ditulis.

category
String

Nama kategori yang digunakan untuk mengatur output.

Atribut

Contoh

Contoh berikut membuat TraceSwitch bernama generalSwitch. Sakelar ini diatur di luar sampel kode.

Jika sakelar diatur ke TraceLevelError atau lebih tinggi, contoh menghasilkan pesan kesalahan pertama ke Listeners. Untuk informasi tentang menambahkan pendengar ke koleksi Listeners, lihat kelas TraceListenerCollection.

Kemudian, jika TraceLevel diatur ke Verbose, contoh menghasilkan pesan kesalahan kedua pada baris yang sama dengan pesan pertama. Terminator baris mengikuti pesan kedua.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject, String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( myObject, category );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::Write( " Object is not valid for this category." );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject, string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write(myObject, category);

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object, category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write(myObject, category)
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(" Object is not valid for this category.")
    End If
End Sub

Keterangan

Secara default, output ditulis ke instans DefaultTraceListener.

Gunakan parameter category untuk mengelompokkan pesan output.

Metode ini memanggil metode Write pendengar jejak.

Lihat juga

Berlaku untuk

Write(Object, String)

Sumber:
Debug.cs
Sumber:
Debug.cs
Sumber:
Debug.cs

Menulis nama kategori dan nilai metode ToString() objek ke pendengar jejak dalam koleksi Listeners.

public:
 static void Write(System::Object ^ value, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object value, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object? value, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : obj * string -> unit
Public Shared Sub Write (value As Object, category As String)

Parameter

value
Object

Objek yang namanya dikirim ke Listeners.

category
String

Nama kategori yang digunakan untuk mengatur output.

Atribut

Contoh

Contoh berikut membuat TraceSwitch bernama generalSwitch. Sakelar ini diatur di luar sampel kode.

Jika sakelar diatur ke TraceLevelError atau lebih tinggi, contoh menghasilkan pesan kesalahan pertama ke Listeners. Untuk informasi tentang menambahkan pendengar ke koleksi Listeners, lihat kelas TraceListenerCollection.

Kemudian, jika TraceLevel diatur ke Verbose, contoh menghasilkan pesan kesalahan kedua pada baris yang sama dengan pesan pertama. Terminator baris mengikuti pesan kedua.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject, String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( myObject, category );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::Write( " Object is not valid for this category." );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject, string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write(myObject, category);

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object, category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write(myObject, category)
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(" Object is not valid for this category.")
    End If
End Sub

Keterangan

Secara default, output ditulis ke instans DefaultTraceListener.

Gunakan parameter category untuk mengelompokkan pesan output.

Metode ini memanggil metode Write pendengar jejak.

Lihat juga

Berlaku untuk

Write(String)

Sumber:
Debug.cs
Sumber:
Debug.cs
Sumber:
Debug.cs

Menulis pesan ke pendengar jejak dalam koleksi Listeners.

public:
 static void Write(System::String ^ message);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string message);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string? message);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : string -> unit
Public Shared Sub Write (message As String)

Parameter

message
String

Pesan untuk ditulis.

Atribut

Contoh

Contoh berikut membuat TraceSwitch bernama generalSwitch. Sakelar ini diatur di luar sampel kode.

Jika sakelar diatur ke TraceLevelError atau lebih tinggi, contoh menghasilkan pesan kesalahan pertama ke Listeners. Untuk informasi tentang menambahkan pendengar ke koleksi Listeners, lihat kelas TraceListenerCollection.

Kemudian, jika TraceLevel diatur ke Verbose, contoh menghasilkan pesan kesalahan kedua pada baris yang sama dengan pesan pertama. Terminator baris mengikuti pesan kedua.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject, String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( myObject, category );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::Write( " Object is not valid for this category." );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject, string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write(myObject, category);

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object, category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write(myObject, category)
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(" Object is not valid for this category.")
    End If
End Sub

Keterangan

Secara default, output ditulis ke instans DefaultTraceListener.

Metode ini memanggil metode Write pendengar jejak.

Lihat juga

Berlaku untuk

Write(Object)

Sumber:
Debug.cs
Sumber:
Debug.cs
Sumber:
Debug.cs

Menulis nilai metode ToString() objek ke pendengar jejak dalam koleksi Listeners.

public:
 static void Write(System::Object ^ value);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object value);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object? value);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : obj -> unit
Public Shared Sub Write (value As Object)

Parameter

value
Object

Objek yang namanya dikirim ke Listeners.

Atribut

Contoh

Contoh berikut membuat TraceSwitch bernama generalSwitch. Sakelar ini diatur di luar sampel kode.

Jika sakelar diatur ke TraceLevelError atau lebih tinggi, contoh menghasilkan pesan kesalahan pertama ke Listeners. Untuk informasi tentang menambahkan pendengar ke koleksi Listeners, lihat kelas TraceListenerCollection.

Kemudian, jika TraceLevel diatur ke Verbose, contoh menghasilkan pesan kesalahan kedua pada baris yang sama dengan pesan pertama. Terminator baris mengikuti pesan kedua.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject, String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( myObject, category );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::Write( " Object is not valid for this category." );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject, string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write(myObject, category);

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object, category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write(myObject, category)
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(" Object is not valid for this category.")
    End If
End Sub

Keterangan

Secara default, output ditulis ke instans DefaultTraceListener.

Metode ini memanggil metode Write pendengar jejak.

Lihat juga

Berlaku untuk