GraphicsPathIterator.NextPathType(Byte, Int32, Int32) Metode

Definisi

Ruang nama:

System.Drawing.Drawing2D

Rakitan:

System.Drawing.Common.dll

Paket:

System.Drawing.Common v9.0.0-preview.5.24306.5

Sumber:

GraphicsPathIterator.cs

Mendapatkan indeks awal dan indeks akhir dari grup titik data berikutnya yang semuanya memiliki jenis yang sama.

public:
 int NextPathType([Runtime::InteropServices::Out] System::Byte % pathType, [Runtime::InteropServices::Out] int % startIndex, [Runtime::InteropServices::Out] int % endIndex);

public int NextPathType (out byte pathType, out int startIndex, out int endIndex);

member this.NextPathType : byte * int * int -> int

Public Function NextPathType (ByRef pathType As Byte, ByRef startIndex As Integer, ByRef endIndex As Integer) As Integer

Parameter

pathType

Byte

[out] Menerima jenis titik yang dibagikan oleh semua titik dalam grup. Jenis yang mungkin dapat diambil dari enumerasi PathPointType.

startIndex

Int32

[out] Menerima indeks awal grup titik.

endIndex

Int32

[out] Menerima indeks akhir dari grup titik.

Mengembalikan

Int32

Metode ini mengembalikan jumlah titik data dalam grup. Jika tidak ada grup lagi di jalur, metode ini mengembalikan 0.

Contoh

Contoh berikut dirancang untuk digunakan dengan Windows Forms, dan memerlukan PaintEventArgse, objek peristiwa OnPaint. Kode melakukan tindakan berikut:

• Membuat objek GraphicsPath.

• Menambahkan tiga baris, persegi panjang, dan elips.

• Mencantumkan nilai semua titik di sisi kiri layar.

• Membuat GraphicsPathIterator dan memutarnya kembali.

• Dalam perulangan for, iterasi melalui titik menggunakan metode NextPathType dan NextPathType.

• Menggunakan nilai yang dikembalikan dari panggilan berulang untuk mencantumkan nomor subpath, jumlah titik di dalamnya, dan jenis jalur menunjuk ke sisi kanan layar.

• Menampilkan nilai untuk jumlah total titik ke layar.

Perhatikan bahwa ListPathPoints adalah fungsi pembantu yang memisahkan sebagian besar (tidak semua) kode tampilan dari kode jalur grafis.

public:
   void NextPathTypeExample( PaintEventArgs^ e )
   {
      // Create the GraphicsPath.
      GraphicsPath^ myPath = gcnew GraphicsPath;
      array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
      Rectangle myRect = Rectangle(120,120,100,100);

      // Add 3 lines, a rectangle, and an ellipse.
      myPath->AddLines( myPoints );
      myPath->AddRectangle( myRect );
      myPath->AddEllipse( 220, 220, 100, 100 );

      // List all of the path points to the screen.
      ListPathPoints( e, myPath, nullptr, 20, 1 );

      // Create a GraphicsPathIterator.
      GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );

      // Rewind the Iterator.
      myPathIterator->Rewind();

      // Iterate the subpaths and types, and list the results to
      // the screen.
            int i;
      int j = 20;
      int mySubPaths;
      int subPathStartIndex;
      int subPathEndIndex;
      Boolean IsClosed;
      Byte subPathPointType;
      int pointTypeStartIndex;
      int pointTypeEndIndex;
      int numPointsFound;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
      j = 20;
      for ( i = 0; i < 3; i++ )
      {
         mySubPaths = myPathIterator->NextSubpath( subPathStartIndex, subPathEndIndex, IsClosed );
         numPointsFound = myPathIterator->NextPathType( subPathPointType, pointTypeStartIndex, pointTypeEndIndex );
         e->Graphics->DrawString( String::Format( "SubPath: {0}  Points Found: {1}  Type of Points: {2}", i,
               numPointsFound, subPathPointType ), myFont, myBrush, 200.0f, (float)j );
         j += 20;
      }

      // List the total number of path points to the screen.
      ListPathPoints( e, myPath, myPathIterator, 200, 2 );
   }

   //-------------------------------------------------------
   //This function is a helper function used by
   // NextPathTypeExample.
   //-------------------------------------------------------
   void ListPathPoints( PaintEventArgs^ e, GraphicsPath^ myPath, GraphicsPathIterator^ myPathIterator, int xOffset, int listType )
   {
      // Get the total number of points for the path,
      // and the arrays of the points and types.
      int myPathPointCount = myPath->PointCount;
      array<PointF>^myPathPoints = myPath->PathPoints;
      array<Byte>^myPathTypes = myPath->PathTypes;

      // Set up variables for drawing the points to the screen.
      int i;
      float j = 20;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
      if ( listType == 1 )
      {
         // Draw the set of path points and types to the screen.
         for ( i = 0; i < myPathPointCount; i++ )
         {
            e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ],
                  myFont, myBrush, (float)xOffset, (float)j );
            j += 20;
         }
      }
      else
      if ( listType == 2 )
      {
         // Draw the total number of points to the screen.
         int myPathTotalPoints = myPathIterator->Count;
         e->Graphics->DrawString( String::Format( "Total Points = {0}", myPathTotalPoints ), myFont, myBrush, (float)xOffset, 100.0f );
      }
      else
      {
         e->Graphics->DrawString( "Wrong or no list type argument.", myFont, myBrush, (float)xOffset, 200.0f );
      }
   }

public void NextPathTypeExample(PaintEventArgs e)
{
             
    // Create the GraphicsPath.
    GraphicsPath myPath = new GraphicsPath();

    Point[] myPoints = {new Point(20, 20), new Point(120, 120), 
         new Point(20, 120),new Point(20, 20) }; 
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
             
    // Add 3 lines, a rectangle, and an ellipse.
    myPath.AddLines(myPoints);
    myPath.AddRectangle(myRect);
    myPath.AddEllipse(220, 220, 100, 100);
             
    // List all of the path points to the screen.
    ListPathPoints(e, myPath, null, 20, 1);
             
    // Create a GraphicsPathIterator.
    GraphicsPathIterator myPathIterator = new
        GraphicsPathIterator(myPath);
             
    // Rewind the Iterator.
    myPathIterator.Rewind();
             
    // Iterate the subpaths and types, and list the results to
             
    // the screen.
    int i, j = 20;
    int mySubPaths, subPathStartIndex, subPathEndIndex;
    Boolean IsClosed;
    byte subPathPointType;
    int pointTypeStartIndex,  pointTypeEndIndex, numPointsFound;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
    j = 20;
    for(i = 0;i < 3; i++)
    {
        mySubPaths = myPathIterator.NextSubpath(
            out subPathStartIndex,
            out subPathEndIndex,
            out IsClosed);
        numPointsFound = myPathIterator.NextPathType(
            out subPathPointType,
            out pointTypeStartIndex,
            out pointTypeEndIndex);
        e.Graphics.DrawString(
            "SubPath: " + i +
            "  Points Found: " + numPointsFound.ToString() +
            "  Type of Points: " + subPathPointType.ToString(),
            myFont,
            myBrush,
            200,
            j);
        j+=20;
    }
             
    // List the total number of path points to the screen.
    ListPathPoints(e, myPath, myPathIterator, 200, 2);
}
             
//-------------------------------------------------------
//This function is a helper function used by
// NextPathTypeExample.
//-------------------------------------------------------
public void ListPathPoints(
    PaintEventArgs e,
    GraphicsPath myPath,
    GraphicsPathIterator myPathIterator,
    int xOffset,
    int listType)
{
             
    // Get the total number of points for the path,
    // and the arrays of the points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
             
    // Set up variables for drawing the points to the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
    if (listType == 1) 
        // List all the path points to the screen.
    {
             
        // Draw the set of path points and types to the screen.
        for(i=0; i<myPathPointCount; i++)
        {
            e.Graphics.DrawString(myPathPoints[i].X.ToString()+
                ", " + myPathPoints[i].Y.ToString() + ", " +
                myPathTypes[i].ToString(),
                myFont,
                myBrush,
                xOffset,
                j);
            j+=20;
        }
    }
    else if (listType == 2) 
        // Display the total number of path points.
    {
             
        // Draw the total number of points to the screen.
        int myPathTotalPoints = myPathIterator.Count;
        e.Graphics.DrawString("Total Points = " +
            myPathTotalPoints.ToString(),
            myFont,
            myBrush,
            xOffset,
            100);
    }
    else
    {
        e.Graphics.DrawString("Wrong or no list type argument.",
            myFont, myBrush, xOffset, 200);
    }
}

Public Sub NextPathTypeExample(ByVal e As PaintEventArgs)

    ' Create the GraphicsPath.
    Dim myPath As New GraphicsPath
    Dim myPoints As Point() = {New Point(20, 20), _
    New Point(120, 120), New Point(20, 120), New Point(20, 20)}
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add 3 lines, a rectangle, and an ellipse.
    myPath.AddLines(myPoints)
    myPath.AddRectangle(myRect)
    myPath.AddEllipse(220, 220, 100, 100)

    ' List all of the path points to the screen.
    ListPathPointsHelper(e, myPath, Nothing, 20, 1)

    ' Create a GraphicsPathIterator.
    Dim myPathIterator As New GraphicsPathIterator(myPath)

    ' Rewind the Iterator.
    myPathIterator.Rewind()

    ' Iterate the subpaths and types, and list the results
    ' to the screen.
    Dim j As Integer = 20
    Dim i As Integer
    Dim mySubPaths, subPathStartIndex, subPathEndIndex As Integer
    Dim IsClosed As [Boolean]
    Dim subPathPointType As Byte
    Dim pointTypeStartIndex, pointTypeEndIndex, _
    numPointsFound As Integer
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)
    j = 20
    For i = 0 To 2
        mySubPaths = myPathIterator.NextSubpath(subPathStartIndex, _
            subPathEndIndex, IsClosed)
        numPointsFound = myPathIterator.NextPathType(subPathPointType, _
            pointTypeStartIndex, pointTypeEndIndex)
        e.Graphics.DrawString("SubPath: " & i & "  Points Found: " & _
            numPointsFound.ToString() & "  Type of Points: " & _
        subPathPointType.ToString(), myFont, myBrush, 200, j)
        j += 20
    Next i

    ' List the total number of path points to the screen.
    ListPathPointsHelper(e, myPath, myPathIterator, 200, 2)
End Sub

' This is a helper function used by NextPathTypeExample.
Public Sub ListPathPointsHelper(ByVal e As PaintEventArgs, _
ByVal myPath As GraphicsPath, ByVal myPathIterator As GraphicsPathIterator, _
ByVal xOffset As Integer, ByVal listType As Integer)

    ' Get the total number of points for the path,
    ' and the arrays of the points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for drawing the points to the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)
    If listType = 1 Then
        ' List all the path points to the screen.

        ' Draw the set of path points and types to the screen.
        For i = 0 To myPathPointCount - 1
            e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
                myPathPoints(i).Y.ToString() + ", " + _
            myPathTypes(i).ToString(), myFont, myBrush, xOffset, j)
            j += 20
        Next i
    Else
        If listType = 2 Then
            ' Display the total number of path points.

            ' Draw the total number of points to the screen.
            Dim myPathTotalPoints As Integer = myPathIterator.Count
            e.Graphics.DrawString("Total Points = " + _
                myPathTotalPoints.ToString(), myFont, myBrush, xOffset, _
                100)
        Else
            e.Graphics.DrawString("Wrong or no list type argument.", _
                myFont, myBrush, xOffset, 200)
        End If
    End If
End Sub