App Center Crashes (Windows)
Important
Visual Studio App Center is scheduled for retirement on March 31, 2025. While you can continue to use Visual Studio App Center until it is fully retired, there are several recommended alternatives that you may consider migrating to.
App Center Crashes will automatically generate a crash log every time your app crashes. The log is first written to the device's storage and when the user starts the app again, the crash report will be sent to App Center.
The App Center SDK collects only crashes caused by unhandled .NET exceptions. It doesn't collect native crashes e.g. when using C or C++. However, if you have an app with C++ crashes, you can upload them to App Center via the upload crashes API.
Follow the WPF/WinForms Getting Started if you haven't set up the SDK in your application yet.
Unhandled exceptions on WinForms applications
Note
This section and following sub sections apply only to WinForms. You can skip this section if you're integrating the SDK on WPF.
By default, an unhandled exception in a WinForms application doesn't trigger a crash (the application doesn't exit) if the debugger isn't attached.
Instead, Windows shows a dialog to the user the option to continue or quit app execution. Consequently, the App Center SDK is unable to automatically capture these exceptions (even if the user clicks on the Quit button).
Crashes are collected on App Center only if it causes the application to exit automatically. App Center supports only one crash per session.
There are two ways to report unhandled exceptions in WinForms. The application can be configured to crash on unhandled exceptions, or continue running but report unhandled exceptions as runtime errors.
Configure the application to exit on crash
This is the only way to report the unhandled exception as a crash on App Center, make the application exit on unhandled exceptions.
To do that, call a Windows method before initializing the SDK:
Application.SetUnhandledExceptionMode(UnhandledExceptionMode.ThrowException);
AppCenter.Start(...);
If this option isn't acceptable in your application, you can report the unhandled exception as a runtime error (described below).
Report the unhandled exception as a runtime error
If your application must keep running after an unhandled exception, you can't report the exception as a crash in App Center but you can instead report it as an error.
To do that, you can use the following code sample:
Application.ThreadException += (sender, args) =>
{
Crashes.TrackError(args.Exception);
};
AppCenter.Start(...);
Note
When the debugger is attached, unhandled exceptions will cause application to exit (crashes) unless a handler is attached to Application.ThreadException.
Generate a test crash
App Center Crashes provides you with an API to generate a test crash for easy testing of the SDK. This API checks for debug vs release configurations. So you can only use it when debugging as it won't work for release apps.
Crashes.GenerateTestCrash();
Get more information about a previous crash
App Center Crashes has two APIs that give you more information in case your app has crashed.
Did the app crash in the previous session?
At any time after starting the SDK, you can check if the app crashed in the previous launch:
bool didAppCrash = await Crashes.HasCrashedInLastSessionAsync();
This comes in handy in case you want to adjust the behavior or UI of your app after a crash has occurred. Some developers choose to show additional UI to apologize to their users, or want a way to get in touch after a crash has occurred.
Note
This method must only be used after Crashes has been started, it will always return false before start.
Details about the last crash
If your app crashed previously, you can get details about the last crash.
ErrorReport crashReport = await Crashes.GetLastSessionCrashReportAsync();
Note
This method must only be used after Crashes has been started, it will always return null before start.
There are numerous use cases for this API, the most common one is people who call this API and implement their custom Crashes delegate or listener.
Customize your usage of App Center Crashes
App Center Crashes provides callbacks for developers to perform additional actions before and when sending crash logs to App Center.
Note
Set the callback before calling AppCenter.Start(), since App Center starts processing crashes immediately after the start.
Should the crash be processed?
Set this callback if you want to decide if a particular crash needs to be processed or not. For example, there could be a system level crash that you'd want to ignore and that you don't want to send to App Center.
Crashes.ShouldProcessErrorReport = (ErrorReport report) =>
{
// Check the report in here and return true or false depending on the ErrorReport.
return true;
};
Ask for the user's consent to send a crash log
If user privacy is important to you, you might want to get user confirmation before sending a crash report to App Center. The SDK exposes a callback that tells App Center Crashes to await user confirmation before sending any crash reports.
If you chose to do so, you're responsible for obtaining the user's confirmation, e.g. through a dialog prompt with one of the following options: Always Send, Send, and Don't send. Based on the input, you'll tell App Center Crashes what to do and the crash will then be handled accordingly.
Note
The SDK doesn't display a dialog for this, the app must provide its own UI to ask for user consent.
Note
The app shouldn't call NotifyUserConfirmation explicitly if it doesn't implement a user confirmation dialog; the Crashes module will handle sending logs for you implicitly.
The following callback shows how to tell the SDK to wait for user confirmation before sending crashes:
Crashes.ShouldAwaitUserConfirmation = () =>
{
// Build your own UI to ask for user consent here. SDK doesn't provide one by default.
// Return true if you built a UI for user consent and are waiting for user input on that custom UI, otherwise false.
return true;
};
In case you return true in the callback above, your app must obtain (using your own code) user permission and message the SDK with the result using the following API.
// Depending on the user's choice, call Crashes.NotifyUserConfirmation() with the right value.
Crashes.NotifyUserConfirmation(UserConfirmation.DontSend);
Crashes.NotifyUserConfirmation(UserConfirmation.Send);
Crashes.NotifyUserConfirmation(UserConfirmation.AlwaysSend);
Get information about the sending status for a crash log
At times, you want to know the status of your app crash. A common use case is that you might want to show UI that tells the users that your app is submitting a crash report, or, in case your app is crashing quickly after the launch, you want to adjust the behavior of the app to make sure the crash logs can be submitted. App Center Crashes provides three different callbacks that you can use in your app to be notified of what's going on:
The following callback will be invoked before the SDK sends a crash log
Crashes.SendingErrorReport += (sender, e) =>
{
// Your code, e.g. to present a custom UI.
};
In case we have network issues or an outage on the endpoint, and you restart the app, SendingErrorReport is triggered again after process restart.
The following callback will be invoked after the SDK sent a crash log successfully
Crashes.SentErrorReport += (sender, e) =>
{
// Your code, e.g. to hide the custom UI.
};
The following callback will be invoked if the SDK has failed to send a crash log
Crashes.FailedToSendErrorReport += (sender, e) =>
{
// Your code goes here.
};
Receiving FailedToSendErrorReport means a non-recoverable error such as a 4xx code occurred. For example, 401 means the appSecret is wrong.
This callback isn't triggered if it's a network issue. In this case, the SDK keeps retrying (and also pauses retries while the network connection is down).
Add attachments to a crash report
You can add binary and text attachments to a crash report. The SDK will send them along with the crash so that you can see them in App Center portal. The following callback will be invoked right before sending the stored crash from previous application launches. It won't be invoked when the crash happens. Be sure the attachment file is not named minidump.dmp as that name is reserved for minidump files. Here is an example of how to attach text and an image to a crash:
Crashes.GetErrorAttachments = (ErrorReport report) =>
{
// Your code goes here.
return new ErrorAttachmentLog[]
{
ErrorAttachmentLog.AttachmentWithText("Hello world!", "hello.txt"),
ErrorAttachmentLog.AttachmentWithBinary(Encoding.UTF8.GetBytes("Fake image"), "fake_image.jpeg", "image/jpeg")
};
};
Note
The size limit is currently 7 MB. Attempting to send a larger attachment will trigger an error.
Enable or disable App Center Crashes at runtime
You can enable and disable App Center Crashes at runtime. If you disable it, the SDK won't do any crash reporting for the app.
Crashes.SetEnabledAsync(false);
To enable App Center Crashes again, use the same API but pass true as a parameter.
Crashes.SetEnabledAsync(true);
You don't need to await this call to make other API calls (such as IsEnabledAsync) consistent.
The state is persisted in the device's storage across application launches.
Check if App Center Crashes is enabled
You can also check if App Center Crashes is enabled or not:
bool isEnabled = await Crashes.IsEnabledAsync();
Handled Errors
App Center also allows you to track errors by using handled exceptions. To do so, use the TrackError method:
try {
// your code goes here.
} catch (Exception exception) {
Crashes.TrackError(exception);
}
An app can optionally attach properties to a handled error report to provide further context. Pass the properties as a dictionary of key/value pairs (strings only) as shown in the example below.
try {
// your code goes here.
} catch (Exception exception) {
var properties = new Dictionary<string, string>
{
{ "Category", "Music" },
{ "Wifi", "On"}
};
Crashes.TrackError(exception, properties);
}
You can also optionally add binary and text attachments to a handled error report. Pass the attachments as an array of ErrorAttachmentLog objects as shown in the example below.
try {
// your code goes here.
} catch (Exception exception) {
var attachments = new ErrorAttachmentLog[]
{
ErrorAttachmentLog.AttachmentWithText("Hello world!", "hello.txt"),
ErrorAttachmentLog.AttachmentWithBinary(Encoding.UTF8.GetBytes("Fake image"), "fake_image.jpeg", "image/jpeg")
};
Crashes.TrackError(exception, attachments: attachments);
}