Breyta

Deila með


Stack<T> Constructors

Definition

Initializes a new instance of the Stack<T> class.

Overloads

Stack<T>()

Initializes a new instance of the Stack<T> class that is empty and has the default initial capacity.

Stack<T>(IEnumerable<T>)

Initializes a new instance of the Stack<T> class that contains elements copied from the specified collection and has sufficient capacity to accommodate the number of elements copied.

Stack<T>(Int32)

Initializes a new instance of the Stack<T> class that is empty and has the specified initial capacity or the default initial capacity, whichever is greater.

Stack<T>()

Source:
Stack.cs
Source:
Stack.cs
Source:
Stack.cs

Initializes a new instance of the Stack<T> class that is empty and has the default initial capacity.

public:
 Stack();
public Stack ();
Public Sub New ()

Examples

The following code example demonstrates this constructor and several methods of the Stack<T> generic class.

The code example creates a stack of strings with default capacity and uses the Push method to push five strings onto the stack. The elements of the stack are enumerated, which does not change the state of the stack. The Pop method is used to pop the first string off the stack. The Peek method is used to look at the next item on the stack, and then the Pop method is used to pop it off.

The ToArray method is used to create an array and copy the stack elements to it, then the array is passed to the Stack<T> constructor that takes IEnumerable<T>, creating a copy of the stack with the order of the elements reversed. The elements of the copy are displayed.

An array twice the size of the stack is created, and the CopyTo method is used to copy the array elements beginning at the middle of the array. The Stack<T> constructor is used again to create a copy of the stack with the order of elements reversed; thus, the three null elements are at the end.

The Contains method is used to show that the string "four" is in the first copy of the stack, after which the Clear method clears the copy and the Count property shows that the stack is empty.

using System;
using System.Collections.Generic;

class Example
{
    public static void Main()
    {
        Stack<string> numbers = new Stack<string>();
        numbers.Push("one");
        numbers.Push("two");
        numbers.Push("three");
        numbers.Push("four");
        numbers.Push("five");

        // A stack can be enumerated without disturbing its contents.
        foreach( string number in numbers )
        {
            Console.WriteLine(number);
        }

        Console.WriteLine("\nPopping '{0}'", numbers.Pop());
        Console.WriteLine("Peek at next item to destack: {0}",
            numbers.Peek());
        Console.WriteLine("Popping '{0}'", numbers.Pop());

        // Create a copy of the stack, using the ToArray method and the
        // constructor that accepts an IEnumerable<T>.
        Stack<string> stack2 = new Stack<string>(numbers.ToArray());

        Console.WriteLine("\nContents of the first copy:");
        foreach( string number in stack2 )
        {
            Console.WriteLine(number);
        }

        // Create an array twice the size of the stack and copy the
        // elements of the stack, starting at the middle of the
        // array.
        string[] array2 = new string[numbers.Count * 2];
        numbers.CopyTo(array2, numbers.Count);

        // Create a second stack, using the constructor that accepts an
        // IEnumerable(Of T).
        Stack<string> stack3 = new Stack<string>(array2);

        Console.WriteLine("\nContents of the second copy, with duplicates and nulls:");
        foreach( string number in stack3 )
        {
            Console.WriteLine(number);
        }

        Console.WriteLine("\nstack2.Contains(\"four\") = {0}",
            stack2.Contains("four"));

        Console.WriteLine("\nstack2.Clear()");
        stack2.Clear();
        Console.WriteLine("\nstack2.Count = {0}", stack2.Count);
    }
}

/* This code example produces the following output:

five
four
three
two
one

Popping 'five'
Peek at next item to destack: four
Popping 'four'

Contents of the first copy:
one
two
three

Contents of the second copy, with duplicates and nulls:
one
two
three




stack2.Contains("four") = False

stack2.Clear()

stack2.Count = 0
 */
open System
open System.Collections.Generic

let numbers = Stack()
numbers.Push "one"
numbers.Push "two"
numbers.Push "three"
numbers.Push "four"
numbers.Push "five"

// A stack can be enumerated without disturbing its contents.
for number in numbers do
    printfn $"{number}"

printfn $"\nPopping '{numbers.Pop()}'"
printfn $"Peek at next item to destack: {numbers.Peek()}"
numbers.Peek() |> ignore
printfn $"Popping '{numbers.Pop()}'"

// Create a copy of the stack, using the ToArray method and the
// constructor that accepts an IEnumerable<T>.
let stack2 = numbers.ToArray() |> Stack

printfn "\nContents of the first copy:"

for number in stack2 do
    printfn $"{number}"

// Create an array twice the size of the stack and copy the
// elements of the stack, starting at the middle of the
// array.
let array2 = numbers.Count * 2 |> Array.zeroCreate
numbers.CopyTo(array2, numbers.Count)

// Create a second stack, using the constructor that accepts an
// IEnumerable(Of T).
let stack3 = Stack array2

printfn "\nContents of the second copy, with duplicates and nulls:"

for number in stack3 do
    printfn $"{number}"

printfn
    $"""
stack2.Contains "four" = {stack2.Contains "four"}"""

printfn "\nstack2.Clear()"
stack2.Clear()
printfn $"\nstack2.Count = {stack2.Count}"

// This code example produces the following output:
//       five
//       four
//       three
//       two
//       one
//
//       Popping 'five'
//       Peek at next item to destack: four
//       Popping 'four'
//
//       Contents of the first copy:
//       one
//       two
//       three
//
//       Contents of the second copy, with duplicates and nulls:
//       one
//       two
//       three
//
//       stack2.Contains("four") = False
//
//       stack2.Clear()
//
//       stack2.Count = 0
Imports System.Collections.Generic

Module Example

    Sub Main

        Dim numbers As New Stack(Of String)
        numbers.Push("one")
        numbers.Push("two")
        numbers.Push("three")
        numbers.Push("four")
        numbers.Push("five")

        ' A stack can be enumerated without disturbing its contents.
        For Each number As String In numbers
            Console.WriteLine(number)
        Next

        Console.WriteLine(vbLf & "Popping '{0}'", numbers.Pop())
        Console.WriteLine("Peek at next item to pop: {0}", _
            numbers.Peek())    
        Console.WriteLine("Popping '{0}'", numbers.Pop())

        ' Create another stack, using the ToArray method and the
        ' constructor that accepts an IEnumerable(Of T). Note that
        ' the order of items on the new stack is reversed.
        Dim stack2 As New Stack(Of String)(numbers.ToArray())

        Console.WriteLine(vbLf & "Contents of the first copy:")
        For Each number As String In stack2
            Console.WriteLine(number)
        Next
        
        ' Create an array twice the size of the stack, compensating
        ' for the fact that Visual Basic allocates an extra array 
        ' element. Copy the elements of the stack, starting at the
        ' middle of the array. 
        Dim array2((numbers.Count * 2) - 1) As String
        numbers.CopyTo(array2, numbers.Count)
        
        ' Create a second stack, using the constructor that accepts an
        ' IEnumerable(Of T). The elements are reversed, with the null
        ' elements appearing at the end of the stack when enumerated.
        Dim stack3 As New Stack(Of String)(array2)

        Console.WriteLine(vbLf & _
            "Contents of the second copy, with duplicates and nulls:")
        For Each number As String In stack3
            Console.WriteLine(number)
        Next

        Console.WriteLine(vbLf & "stack2.Contains(""four"") = {0}", _
            stack2.Contains("four"))

        Console.WriteLine(vbLf & "stack2.Clear()")
        stack2.Clear()
        Console.WriteLine(vbLf & "stack2.Count = {0}", _
            stack2.Count)
    End Sub
End Module

' This code example produces the following output:
'
'five
'four
'three
'two
'one
'
'Popping 'five'
'Peek at next item to pop: four
'Popping 'four'
'
'Contents of the first copy:
'one
'two
'three
'
'Contents of the second copy, with duplicates and nulls:
'one
'two
'three
'
'
'
'
'stack2.Contains("four") = False
'
'stack2.Clear()
'
'stack2.Count = 0

Remarks

The capacity of a Stack<T> is the number of elements that the Stack<T> can hold. As elements are added to a Stack<T>, the capacity is automatically increased as required by reallocating the internal array.

If the size of the collection can be estimated, specifying the initial capacity eliminates the need to perform a number of resizing operations while adding elements to the Stack<T>.

The capacity can be decreased by calling TrimExcess.

This constructor is an O(1) operation.

Applies to

Stack<T>(IEnumerable<T>)

Source:
Stack.cs
Source:
Stack.cs
Source:
Stack.cs

Initializes a new instance of the Stack<T> class that contains elements copied from the specified collection and has sufficient capacity to accommodate the number of elements copied.

public:
 Stack(System::Collections::Generic::IEnumerable<T> ^ collection);
public Stack (System.Collections.Generic.IEnumerable<T> collection);
new System.Collections.Generic.Stack<'T> : seq<'T> -> System.Collections.Generic.Stack<'T>
Public Sub New (collection As IEnumerable(Of T))

Parameters

collection
IEnumerable<T>

The collection to copy elements from.

Exceptions

collection is null.

Examples

The following code example demonstrates this constructor and several methods of the Stack<T> generic class.

The code example creates a stack of strings with default capacity and uses the Push method to push five strings onto the stack. The elements of the stack are enumerated, which does not change the state of the stack. The Pop method is used to pop the first string off the stack. The Peek method is used to look at the next item on the stack, and then the Pop method is used to pop it off.

The ToArray method is used to create an array and copy the stack elements to it, then the array is passed to the Stack<T> constructor that takes IEnumerable<T>, creating a copy of the stack with the order of the elements reversed. The elements of the copy are displayed.

An array twice the size of the stack is created, and the CopyTo method is used to copy the array elements beginning at the middle of the array. The Stack<T> constructor is used again to create a copy of the stack with the order of elements reversed; thus, the three null elements are at the end.

The Contains method is used to show that the string "four" is in the first copy of the stack, after which the Clear method clears the copy and the Count property shows that the stack is empty.

using System;
using System.Collections.Generic;

class Example
{
    public static void Main()
    {
        Stack<string> numbers = new Stack<string>();
        numbers.Push("one");
        numbers.Push("two");
        numbers.Push("three");
        numbers.Push("four");
        numbers.Push("five");

        // A stack can be enumerated without disturbing its contents.
        foreach( string number in numbers )
        {
            Console.WriteLine(number);
        }

        Console.WriteLine("\nPopping '{0}'", numbers.Pop());
        Console.WriteLine("Peek at next item to destack: {0}",
            numbers.Peek());
        Console.WriteLine("Popping '{0}'", numbers.Pop());

        // Create a copy of the stack, using the ToArray method and the
        // constructor that accepts an IEnumerable<T>.
        Stack<string> stack2 = new Stack<string>(numbers.ToArray());

        Console.WriteLine("\nContents of the first copy:");
        foreach( string number in stack2 )
        {
            Console.WriteLine(number);
        }

        // Create an array twice the size of the stack and copy the
        // elements of the stack, starting at the middle of the
        // array.
        string[] array2 = new string[numbers.Count * 2];
        numbers.CopyTo(array2, numbers.Count);

        // Create a second stack, using the constructor that accepts an
        // IEnumerable(Of T).
        Stack<string> stack3 = new Stack<string>(array2);

        Console.WriteLine("\nContents of the second copy, with duplicates and nulls:");
        foreach( string number in stack3 )
        {
            Console.WriteLine(number);
        }

        Console.WriteLine("\nstack2.Contains(\"four\") = {0}",
            stack2.Contains("four"));

        Console.WriteLine("\nstack2.Clear()");
        stack2.Clear();
        Console.WriteLine("\nstack2.Count = {0}", stack2.Count);
    }
}

/* This code example produces the following output:

five
four
three
two
one

Popping 'five'
Peek at next item to destack: four
Popping 'four'

Contents of the first copy:
one
two
three

Contents of the second copy, with duplicates and nulls:
one
two
three




stack2.Contains("four") = False

stack2.Clear()

stack2.Count = 0
 */
open System
open System.Collections.Generic

let numbers = Stack()
numbers.Push "one"
numbers.Push "two"
numbers.Push "three"
numbers.Push "four"
numbers.Push "five"

// A stack can be enumerated without disturbing its contents.
for number in numbers do
    printfn $"{number}"

printfn $"\nPopping '{numbers.Pop()}'"
printfn $"Peek at next item to destack: {numbers.Peek()}"
numbers.Peek() |> ignore
printfn $"Popping '{numbers.Pop()}'"

// Create a copy of the stack, using the ToArray method and the
// constructor that accepts an IEnumerable<T>.
let stack2 = numbers.ToArray() |> Stack

printfn "\nContents of the first copy:"

for number in stack2 do
    printfn $"{number}"

// Create an array twice the size of the stack and copy the
// elements of the stack, starting at the middle of the
// array.
let array2 = numbers.Count * 2 |> Array.zeroCreate
numbers.CopyTo(array2, numbers.Count)

// Create a second stack, using the constructor that accepts an
// IEnumerable(Of T).
let stack3 = Stack array2

printfn "\nContents of the second copy, with duplicates and nulls:"

for number in stack3 do
    printfn $"{number}"

printfn
    $"""
stack2.Contains "four" = {stack2.Contains "four"}"""

printfn "\nstack2.Clear()"
stack2.Clear()
printfn $"\nstack2.Count = {stack2.Count}"

// This code example produces the following output:
//       five
//       four
//       three
//       two
//       one
//
//       Popping 'five'
//       Peek at next item to destack: four
//       Popping 'four'
//
//       Contents of the first copy:
//       one
//       two
//       three
//
//       Contents of the second copy, with duplicates and nulls:
//       one
//       two
//       three
//
//       stack2.Contains("four") = False
//
//       stack2.Clear()
//
//       stack2.Count = 0
Imports System.Collections.Generic

Module Example

    Sub Main

        Dim numbers As New Stack(Of String)
        numbers.Push("one")
        numbers.Push("two")
        numbers.Push("three")
        numbers.Push("four")
        numbers.Push("five")

        ' A stack can be enumerated without disturbing its contents.
        For Each number As String In numbers
            Console.WriteLine(number)
        Next

        Console.WriteLine(vbLf & "Popping '{0}'", numbers.Pop())
        Console.WriteLine("Peek at next item to pop: {0}", _
            numbers.Peek())    
        Console.WriteLine("Popping '{0}'", numbers.Pop())

        ' Create another stack, using the ToArray method and the
        ' constructor that accepts an IEnumerable(Of T). Note that
        ' the order of items on the new stack is reversed.
        Dim stack2 As New Stack(Of String)(numbers.ToArray())

        Console.WriteLine(vbLf & "Contents of the first copy:")
        For Each number As String In stack2
            Console.WriteLine(number)
        Next
        
        ' Create an array twice the size of the stack, compensating
        ' for the fact that Visual Basic allocates an extra array 
        ' element. Copy the elements of the stack, starting at the
        ' middle of the array. 
        Dim array2((numbers.Count * 2) - 1) As String
        numbers.CopyTo(array2, numbers.Count)
        
        ' Create a second stack, using the constructor that accepts an
        ' IEnumerable(Of T). The elements are reversed, with the null
        ' elements appearing at the end of the stack when enumerated.
        Dim stack3 As New Stack(Of String)(array2)

        Console.WriteLine(vbLf & _
            "Contents of the second copy, with duplicates and nulls:")
        For Each number As String In stack3
            Console.WriteLine(number)
        Next

        Console.WriteLine(vbLf & "stack2.Contains(""four"") = {0}", _
            stack2.Contains("four"))

        Console.WriteLine(vbLf & "stack2.Clear()")
        stack2.Clear()
        Console.WriteLine(vbLf & "stack2.Count = {0}", _
            stack2.Count)
    End Sub
End Module

' This code example produces the following output:
'
'five
'four
'three
'two
'one
'
'Popping 'five'
'Peek at next item to pop: four
'Popping 'four'
'
'Contents of the first copy:
'one
'two
'three
'
'Contents of the second copy, with duplicates and nulls:
'one
'two
'three
'
'
'
'
'stack2.Contains("four") = False
'
'stack2.Clear()
'
'stack2.Count = 0

Remarks

The capacity of a Stack<T> is the number of elements that the Stack<T> can hold. As elements are added to a Stack<T>, the capacity is automatically increased as required by reallocating the internal array.

If the size of the collection can be estimated, specifying the initial capacity eliminates the need to perform a number of resizing operations while adding elements to the Stack<T>.

The capacity can be decreased by calling TrimExcess.

The elements are copied onto the Stack<T> in the same order they are read by the IEnumerator<T> of the collection.

This constructor is an O(n) operation, where n is the number of elements in collection.

See also

Applies to

Stack<T>(Int32)

Source:
Stack.cs
Source:
Stack.cs
Source:
Stack.cs

Initializes a new instance of the Stack<T> class that is empty and has the specified initial capacity or the default initial capacity, whichever is greater.

public:
 Stack(int capacity);
public Stack (int capacity);
new System.Collections.Generic.Stack<'T> : int -> System.Collections.Generic.Stack<'T>
Public Sub New (capacity As Integer)

Parameters

capacity
Int32

The initial number of elements that the Stack<T> can contain.

Exceptions

capacity is less than zero.

Remarks

The capacity of a Stack<T> is the number of elements that the Stack<T> can hold. As elements are added to a Stack<T>, the capacity is automatically increased as required by reallocating the internal array.

If the size of the collection can be estimated, specifying the initial capacity eliminates the need to perform a number of resizing operations while adding elements to the Stack<T>.

The capacity can be decreased by calling TrimExcess.

This constructor is an O(n) operation, where n is capacity.

Applies to