BitVector32.Equals 메서드

정의

네임스페이스:

System.Collections.Specialized

어셈블리:

System.Collections.Specialized.dll

오버로드

Equals(BitVector32)	현재 instance 동일한 형식의 다른 instance 같은지 여부를 나타냅니다.
Equals(Object)	지정된 개체가 BitVector32와 같은지 여부를 확인합니다.

Equals(BitVector32)

Source:

BitVector32.cs

현재 instance 동일한 형식의 다른 instance 같은지 여부를 나타냅니다.

public:
 virtual bool Equals(System::Collections::Specialized::BitVector32 other);

public bool Equals (System.Collections.Specialized.BitVector32 other);

override this.Equals : System.Collections.Specialized.BitVector32 -> bool

Public Function Equals (other As BitVector32) As Boolean

매개 변수

other

BitVector32

이 instance 비교할 instance.

반환

Boolean

true현재 instance 다른 instance 같으면 이고, false그렇지 않으면 입니다.

구현

Equals(T)

Equals(Object)

Source:

BitVector32.cs

지정된 개체가 BitVector32와 같은지 여부를 확인합니다.

public:
 override bool Equals(System::Object ^ o);

public override bool Equals (object? o);

override this.Equals : obj -> bool

Public Overrides Function Equals (o As Object) As Boolean

매개 변수

o

Object

현재 BitVector32와 비교할 개체입니다.

반환

Boolean

지정된 개체가 BitVector32와 같으면 true이고, 그렇지 않으면 false입니다.

예제

다음 코드 예제에서는 BitVector32 를 다른 BitVector32 와 비교하고 를 와 비교합니다 Int32.

#using <system.dll>

using namespace System;
using namespace System::Collections::Specialized;

int main()
{
   // Creates and initializes a BitVector32 with the value 123.
   // This is the BitVector32 that will be compared to different types.
   BitVector32 myBV(123);

   // Creates and initializes a new BitVector32 which will be set up as sections.
   BitVector32 myBVsect(0);

   // Compares myBV and myBVsect.
   Console::WriteLine( "myBV                 : {0}", myBV );
   Console::WriteLine( "myBVsect             : {0}", myBVsect );
   if ( myBV.Equals( myBVsect ) )
      Console::WriteLine( "   myBV( {0}) equals myBVsect( {1}).", myBV.Data, myBVsect.Data );
   else
      Console::WriteLine( "   myBV( {0}) does not equal myBVsect( {1}).", myBV.Data, myBVsect.Data );

   Console::WriteLine();

   // Assigns values to the sections of myBVsect.
   BitVector32::Section mySect1 = BitVector32::CreateSection( 5 );
   BitVector32::Section mySect2 = BitVector32::CreateSection( 1, mySect1 );
   BitVector32::Section mySect3 = BitVector32::CreateSection( 20, mySect2 );
   myBVsect[ mySect1 ] = 3;
   myBVsect[ mySect2 ] = 1;
   myBVsect[ mySect3 ] = 7;

   // Compares myBV and myBVsect.
   Console::WriteLine( "myBV                 : {0}", myBV );
   Console::WriteLine( "myBVsect with values : {0}", myBVsect );
   if ( myBV.Equals( myBVsect ) )
      Console::WriteLine( "   myBV( {0}) equals myBVsect( {1}).", myBV.Data, myBVsect.Data );
   else
      Console::WriteLine( "   myBV( {0}) does not equal myBVsect( {1}).", myBV.Data, myBVsect.Data );

   Console::WriteLine();

   // Compare myBV with an Int32.
   Console::WriteLine( "Comparing myBV with an Int32: " );
   Int32 myInt32 = 123;

   // Using Equals will fail because Int32 is not compatible with BitVector32.
   if ( myBV.Equals( myInt32 ) )
      Console::WriteLine( "   Using BitVector32::Equals, myBV( {0}) equals myInt32( {1}).", myBV.Data, myInt32 );
   else
      Console::WriteLine( "   Using BitVector32::Equals, myBV( {0}) does not equal myInt32( {1}).", myBV.Data, myInt32 );

   // To compare a BitVector32 with an Int32, use the "==" operator.
   if ( myBV.Data == myInt32 )
      Console::WriteLine( "   Using the \"==\" operator, myBV.Data( {0}) equals myInt32( {1}).", myBV.Data, myInt32 );
   else
      Console::WriteLine( "   Using the \"==\" operator, myBV.Data( {0}) does not equal myInt32( {1}).", myBV.Data, myInt32 );
}

/*
This code produces the following output.

myBV                 : BitVector32 {00000000000000000000000001111011}
myBVsect             : BitVector32 {00000000000000000000000000000000}
   myBV(123) does not equal myBVsect(0).

myBV                 : BitVector32 {00000000000000000000000001111011}
myBVsect with values : BitVector32 {00000000000000000000000001111011}
   myBV(123) equals myBVsect(123).

Comparing myBV with an Int32:
   Using BitVector32::Equals, myBV(123) does not equal myInt32(123).
   Using the "==" operator, myBV.Data(123) equals myInt32(123).

*/

using System;
using System.Collections.Specialized;

public class SamplesBitVector32  {

   public static void Main()  {

      // Creates and initializes a BitVector32 with the value 123.
      // This is the BitVector32 that will be compared to different types.
      BitVector32 myBV = new BitVector32( 123 );

      // Creates and initializes a new BitVector32 which will be set up as sections.
      BitVector32 myBVsect = new BitVector32( 0 );

      // Compares myBV and myBVsect.
      Console.WriteLine( "myBV                 : {0}", myBV.ToString() );
      Console.WriteLine( "myBVsect             : {0}", myBVsect.ToString() );
      if ( myBV.Equals( myBVsect ) )
         Console.WriteLine( "   myBV({0}) equals myBVsect({1}).", myBV.Data, myBVsect.Data );
      else
         Console.WriteLine( "   myBV({0}) does not equal myBVsect({1}).", myBV.Data, myBVsect.Data );
      Console.WriteLine();

      // Assigns values to the sections of myBVsect.
      BitVector32.Section mySect1 = BitVector32.CreateSection( 5 );
      BitVector32.Section mySect2 = BitVector32.CreateSection( 1, mySect1 );
      BitVector32.Section mySect3 = BitVector32.CreateSection( 20, mySect2 );
      myBVsect[mySect1] = 3;
      myBVsect[mySect2] = 1;
      myBVsect[mySect3] = 7;

      // Compares myBV and myBVsect.
      Console.WriteLine( "myBV                 : {0}", myBV.ToString() );
      Console.WriteLine( "myBVsect with values : {0}", myBVsect.ToString() );
      if ( myBV.Equals( myBVsect ) )
         Console.WriteLine( "   myBV({0}) equals myBVsect({1}).", myBV.Data, myBVsect.Data );
      else
         Console.WriteLine( "   myBV({0}) does not equal myBVsect({1}).", myBV.Data, myBVsect.Data );
      Console.WriteLine();

      // Compare myBV with an Int32.
      Console.WriteLine( "Comparing myBV with an Int32: " );
      Int32 myInt32 = 123;
      // Using Equals will fail because Int32 is not compatible with BitVector32.
      if ( myBV.Equals( myInt32 ) )
         Console.WriteLine( "   Using BitVector32.Equals, myBV({0}) equals myInt32({1}).", myBV.Data, myInt32 );
      else
         Console.WriteLine( "   Using BitVector32.Equals, myBV({0}) does not equal myInt32({1}).", myBV.Data, myInt32 );
      // To compare a BitVector32 with an Int32, use the "==" operator.
      if ( myBV.Data == myInt32 )
         Console.WriteLine( "   Using the \"==\" operator, myBV.Data({0}) equals myInt32({1}).", myBV.Data, myInt32 );
      else
         Console.WriteLine( "   Using the \"==\" operator, myBV.Data({0}) does not equal myInt32({1}).", myBV.Data, myInt32 );
   }
}

/*
This code produces the following output.

myBV                 : BitVector32{00000000000000000000000001111011}
myBVsect             : BitVector32{00000000000000000000000000000000}
   myBV(123) does not equal myBVsect(0).

myBV                 : BitVector32{00000000000000000000000001111011}
myBVsect with values : BitVector32{00000000000000000000000001111011}
   myBV(123) equals myBVsect(123).

Comparing myBV with an Int32:
   Using BitVector32.Equals, myBV(123) does not equal myInt32(123).
   Using the "==" operator, myBV.Data(123) equals myInt32(123).

*/

Imports System.Collections.Specialized


Public Class SamplesBitVector32

   Public Shared Sub Main()
      
      ' Creates and initializes a BitVector32 with the value 123.
      ' This is the BitVector32 that will be compared to different types.
      Dim myBV As New BitVector32(123)
      
      ' Creates and initializes a new BitVector32 which will be set up as sections.
      Dim myBVsect As New BitVector32(0)
      
      ' Compares myBV and myBVsect.
      Console.WriteLine("myBV                 : {0}", myBV.ToString())
      Console.WriteLine("myBVsect             : {0}", myBVsect.ToString())
      If myBV.Equals(myBVsect) Then
         Console.WriteLine("   myBV({0}) equals myBVsect({1}).", myBV.Data, myBVsect.Data)
      Else
         Console.WriteLine("   myBV({0}) does not equal myBVsect({1}).", myBV.Data, myBVsect.Data)
      End If
      Console.WriteLine()
      
      ' Assigns values to the sections of myBVsect.
      Dim mySect1 As BitVector32.Section = BitVector32.CreateSection(5)
      Dim mySect2 As BitVector32.Section = BitVector32.CreateSection(1, mySect1)
      Dim mySect3 As BitVector32.Section = BitVector32.CreateSection(20, mySect2)
      myBVsect(mySect1) = 3
      myBVsect(mySect2) = 1
      myBVsect(mySect3) = 7
      
      ' Compares myBV and myBVsect.
      Console.WriteLine("myBV                 : {0}", myBV.ToString())
      Console.WriteLine("myBVsect with values : {0}", myBVsect.ToString())
      If myBV.Equals(myBVsect) Then
         Console.WriteLine("   myBV({0}) equals myBVsect({1}).", myBV.Data, myBVsect.Data)
      Else
         Console.WriteLine("   myBV({0}) does not equal myBVsect({1}).", myBV.Data, myBVsect.Data)
      End If
      Console.WriteLine()
      
      ' Compare myBV with an Int32.
      Console.WriteLine("Comparing myBV with an Int32: ")
      Dim myInt32 As Int32 = 123
      ' Using Equals will fail because Int32 is not compatible with BitVector32.
      If myBV.Equals(myInt32) Then
         Console.WriteLine("   Using BitVector32.Equals, myBV({0}) equals myInt32({1}).", myBV.Data, myInt32)
      Else
         Console.WriteLine("   Using BitVector32.Equals, myBV({0}) does not equal myInt32({1}).", myBV.Data, myInt32)
      End If ' To compare a BitVector32 with an Int32, use the "==" operator.
      If myBV.Data = myInt32 Then
         Console.WriteLine("   Using the ""=="" operator, myBV.Data({0}) equals myInt32({1}).", myBV.Data, myInt32)
      Else
         Console.WriteLine("   Using the ""=="" operator, myBV.Data({0}) does not equal myInt32({1}).", myBV.Data, myInt32)
      End If 

   End Sub

End Class


' This code produces the following output.
'
' myBV                 : BitVector32{00000000000000000000000001111011}
' myBVsect             : BitVector32{00000000000000000000000000000000}
'    myBV(123) does not equal myBVsect(0).
'
' myBV                 : BitVector32{00000000000000000000000001111011}
' myBVsect with values : BitVector32{00000000000000000000000001111011}
'    myBV(123) equals myBVsect(123).
'
' Comparing myBV with an Int32:
'    Using BitVector32.Equals, myBV(123) does not equal myInt32(123).
'    Using the "==" operator, myBV.Data(123) equals myInt32(123).

설명

의 형식이 형식과 BitVector32 호환되고 값이 의 o 값 Datao 과 같으면 개체 o 는 과 같은 BitVector32 것으로 간주됩니다.

이 방법은 O(1) 작업에 설명 합니다.