Deploy Integration Services (SSIS) Projects and Packages
Applies to:
SQL Server
SSIS Integration Runtime in Azure Data Factory
Integration Services supports two deployment models, the project deployment model and the legacy package deployment model. The project deployment model enables you to deploy your projects to the Integration Services server.
For more information about the legacy package deployment model, see Legacy Package Deployment (SSIS).
Note
The project deployment model was introduced in SQL Server 2012 Integration Services (SSIS). With this deployment model, you were not able to deploy one or more packages without deploying the whole project. SQL Server 2016 (13.x) Integration Services (SSIS) introduced the Incremental Package Deployment feature, which lets you deploy one or more packages without deploying the whole project.
Note
This article describes how to deploy SSIS packages in general, and how to deploy packages on premises. You can also deploy SSIS packages to the following platforms:
- The Microsoft Azure cloud. For more info, see Lift and shift SQL Server Integration Services workloads to the cloud.
- Linux. For more info, see Extract, transform, and load data on Linux with SSIS.
Compare Project Deployment Model and legacy Package Deployment Model
The type of deployment model that you choose for a project determines which development and administrative options are available for that project. The following table shows the differences and similarities between using the project deployment model and using the package deployment model.
When Using the Project Deployment Model | When Using the legacy Package Deployment Model |
---|---|
A project is the unit of deployment. | A package is the unit of deployment. |
Parameters are used to assign values to package properties. | Configurations are used to assign values to package properties. |
A project, containing packages and parameters, is built to a project deployment file (.ispac extension). | Packages (.dtsx extension) and configurations (.dtsConfig extension) are saved individually to the file system. |
A project, containing packages and parameters, is deployed to the SSISDB catalog on an instance of SQL Server. | Packages and configurations are copied to the file system on another computer. Packages can also be saved to the MSDB database on an instance of SQL Server. |
CLR integration is required on the database engine. | CLR integration is not required on the database engine. |
Environment-specific parameter values are stored in environment variables. | Environment-specific configuration values are stored in configuration files. |
Projects and packages in the catalog can be validated on the server before execution. You can use SQL Server Management Studio, stored procedures, or managed code to perform the validation. | Packages are validated just before execution. You can also validate a package with dtExec or managed code. |
Packages are executed by starting an execution on the database engine. A project identifier, explicit parameter values (optional), and environment references (optional) are assigned to an execution before it is started. You can also execute packages using dtExec. |
Packages are executed using the dtExec and DTExecUI execution utilities. Applicable configurations are identified by command-prompt arguments (optional). |
During execution, events that are produced by the package are captured automatically and saved to the catalog. You can query these events with Transact-SQL views. | During execution, events that are produced by a package are not captured automatically. A log provider must be added to the package to capture events. |
Packages are run in a separate Windows process. | Packages are run in a separate Windows process. |
SQL Server Agent is used to schedule package execution. | SQL Server Agent is used to schedule package execution. |
Features of Project Deployment Model
The following table lists the features that are available to projects developed only for the project deployment model.
Feature | Description |
---|---|
Parameters | A parameter specifies the data that will be used by a package. You can scope parameters to the package level or project level with package parameters and project parameters, respectively. Parameters can be used in expressions or tasks. When the project is deployed to the catalog, you can assign a literal value for each parameter or use the default value that was assigned at design time. In place of a literal value, you can also reference an environment variable. Environment variable values are resolved at the time of package execution. |
Environments | An environment is a container of variables that can be referenced by Integration Services projects. Each project can have multiple environment references, but a single instance of package execution can only reference variables from a single environment. Environments allow you to organize the values that you assign to a package. For example, you might have environments named "Dev", "test", and "Production". |
Environment variables | An environment variable defines a literal value that can be assigned to a parameter during package execution. To use an environment variable, create an environment reference (in the project that corresponds to the environment having the parameter), assign a parameter value to the name of the environment variable, and specify the corresponding environment reference when you configure an instance of execution. |
SSISDB catalog | All Integration Services objects are stored and managed on an instance of SQL Server in a database referred to as the SSISDB catalog. The catalog allows you to use folders to organize your projects and environments. Each instance of SQL Server can have one catalog. Each catalog can have zero or more folders. Each folder can have zero or more projects and zero or more environments. A folder in the catalog can also be used as a boundary for permissions to Integration Services objects. |
Catalog stored procedures and views | A large number of stored procedures and views can be used to manage Integration Services objects in the catalog. For example, you can specify values to parameters and environment variables, create and start executions, and monitor catalog operations. You can even see exactly which values will be used by a package before execution starts. |
Project Deployment
At the center of the project deployment model is the project deployment file (.ispac extension). The project deployment file is a self-contained unit of deployment that includes only the essential information about the packages and parameters in the project. The project deployment file does not capture all of the information contained in the Integration Services project file (.dtproj extension). For example, additional text files that you use for writing notes are not stored in the project deployment file and thus are not deployed to the catalog.
Permissions Required to Deploy SSIS Projects and Packages
If you change the SSIS service account from the default, you may have to give additional permissions to the non-default service account before you can deploy packages successfully. If the non-default service account doesn't have the required permissions, you may see the following error message.
A .NET Framework error occurred during execution of user-defined routine or aggregate "deploy_project_internal": System.ComponentModel.Win32Exception: A required privilege is not held by the client.
This error is typically the result of missing DCOM permissions. To fix the error, do the following:
- Open the Component Services console (or run Dcomcnfg.exe).
- In the Component Services console, expand Component Services > Computers > My Computer > DCOM Config.
- In the list, locate Microsoft SQL Server Integration Services xx.0 for the version of SQL Server that you're using. For example, SQL Server 2016 is version 13.
- Right-click and select Properties.
- In the Microsoft SQL Server Integration Services 13.0 Properties dialog box, select the Security tab.
- For each of the three sets of permissions - Launch and Activation, Access, and Configuration - select Customize, then select Edit to open the Permission dialog box.
- In the Permission dialog box, add the non-default service account and grant Allow permissions as required. Typically, an account has Local Launch and Local Activation permissions.
- Click OK twice, then close the Component Services console.
For more info about the error described in this section and about the permissions required by the SSIS service account, see the following blog post:
Deploy Projects to Integration Services Server
In the current release of Integration Services, you can deploy your projects to the Integration Services server. The Integration Services server enables you to manage packages, run packages, and configure runtime values for packages by using environments.
Note
As in earlier versions of Integration Services, in the current release you can also deploy your packages to an instance of SQL Server and use Integration Services service to run and manage the packages. You use the package deployment model. For more information, see Legacy Package Deployment (SSIS).
To deploy a project to the Integration Services server, complete the following tasks:
Create an SSISDB catalog, if you haven't already. For more information, see SSIS Catalog.
Convert the project to the project deployment model by running the Integration Services Project Conversion Wizard. For more information, see the following instructions: To convert a project to the project deployment model
If you created the project in SQL Server 2014 Integration Services (SSIS) or later, by default the project uses the project deployment model.
If you created the project in an earlier release of Integration Services, after you open the project file in Visual Studio, convert the project to the project deployment model.
Note
If the project contains one or more datasources, the datasources are removed when the project conversion is completed. To create a connection to a data source that the packages in the project can share, add a connection manager at the project level. For more information, see Add, Delete, or Share a Connection Manager in a Package.
Depending on whether you run the Integration Services Project Conversion Wizard from Visual Studio or from SQL Server Management Studio, the wizard performs different conversion tasks.
If you run the wizard from Visual Studio, the packages contained in the project are converted from Integration Services 2005, 2008, or 2008 R2 to the format that is used by the current version of Integration Services. The original project (.dtproj) and package (.dtsx) files are upgraded.
If you run the wizard from SQL Server Management Studio, the wizard generates a project deployment file (.ispac) from the packages and configurations contained in the project. The original package (.dtsx) files are not upgraded.
You can select an existing file or create a new file, in the Selection Destination page of the wizard.
To upgrade package files when a project is converted, run the Integration Services Project Conversion Wizard from Visual Studio. To upgrade package files separately from a project conversion, run the Integration Services Project Conversion Wizard from SQL Server Management Studio and then run the SSIS Package Upgrade Wizard. If you upgrade the package files separately, ensure that you save the changes. Otherwise, when you convert the project to the project deployment model, any unsaved changes to the package are not converted.
For more information on package upgrade, see Upgrade Integration Services Packages and Upgrade Integration Services Packages Using the SSIS Package Upgrade Wizard.
Deploy the project to the Integration Services server. For more information, see the instructions below: To deploy a project to the Integration Services Server.
(Optional) Create an environment for the deployed project.
To convert a project to the project deployment model
Open the project in Visual Studio, and then in Solution Explorer, right-click the project and click Convert to Project Deployment Model.
-or-
From Object Explorer in Management Studio, right-click the Projects node and select Import Packages.
Complete the wizard.
To deploy a project to the Integration Services Server
Open the project in Visual Studio, and then From the Project menu, select Deploy to launch the Integration Services Deployment Wizard.
or
In SQL Server Management Studio, expand the Integration Services > SSISDB node in Object Explorer, and locate the Projects folder for the project you want to deploy. Right-click the Projects folder, and then click Deploy Project.
or
From the command prompt, run isdeploymentwizard.exe from %ProgramFiles%\Microsoft SQL Server\130\DTS\Binn. On 64-bit computers, there is also a 32-bit version of the tool in %ProgramFiles(x86)%\Microsoft SQL Server\130\DTS\Binn.
On the Select Source page, click Project deployment file to select the deployment file for the project.
or
Click Integration Services catalog to select a project that has already been deployed to the SSISDB catalog.
Complete the wizard.
Deploy Packages to Integration Services Server
The Incremental Package Deployment feature introduced in SQL Server 2016 (13.x) Integration Services (SSIS) lets you deploy one or more packages to an existing or new project without deploying the whole project.
Deploy packages by using the Integration Services Deployment Wizard
From the command prompt, run isdeploymentwizard.exe from %ProgramFiles%\Microsoft SQL Server\130\DTS\Binn. On 64-bit computers, there is also a 32-bit version of the tool in %ProgramFiles(x86)%\Microsoft SQL Server\130\DTS\Binn.
On the Select Source page, switch to Package Deployment model. Then, select the folder that contains source packages and configure the packages.
Complete the wizard. Follow the remaining steps described in Package Deployment Model.
Deploy packages by using SQL Server Management Studio
In SQL Server Management Studio, expand the Integration Services Catalogs > SSISDB node in Object Explorer.
Right-click the Projects folder, and then click Deploy Projects.
If you see the Introduction page, click Next to continue.
On the Select Source page, switch to Package Deployment model. Then, select the folder that contains source packages and configure the packages.
Complete the wizard. Follow the remaining steps described in Package Deployment Model.
Deploy packages by using SQL Server Data Tools (Visual Studio)
In Visual Studio, with an Integration Services project open, select the package or packages that you want to deploy.
Right-click and select Deploy Package. The Deployment Wizard opens with the selected packages configured as the source packages.
Complete the wizard. Follow the remaining steps described in Package Deployment Model.
Deploy packages by using the deploy_packages stored procedure
You can use the [catalog].[deploy_packages] stored procedure to deploy one or more SSIS packages to the SSIS Catalog. The following code example demonstrates the use of this stored procedure to deploy packages to an SSIS server. For more info, see catalog.deploy_packages.
private static void Main(string[] args)
{
// Connection string to SSISDB
var connectionString = "Data Source=.;Initial Catalog=SSISDB;Integrated Security=True;MultipleActiveResultSets=false";
using (var sqlConnection = new SqlConnection(connectionString))
{
sqlConnection.Open();
var sqlCommand = new SqlCommand
{
Connection = sqlConnection,
CommandType = CommandType.StoredProcedure,
CommandText = "[catalog].[deploy_packages]"
};
var packageData = Encoding.UTF8.GetBytes(File.ReadAllText(@"C:\Test\Package.dtsx"));
// DataTable: name is the package name without extension and package_data is byte array of package.
var packageTable = new DataTable();
packageTable.Columns.Add("name", typeof(string));
packageTable.Columns.Add("package_data", typeof(byte[]));
packageTable.Rows.Add("Package", packageData);
// Set the destination project and folder which is named Folder and Project.
sqlCommand.Parameters.Add(new SqlParameter("@folder_name", SqlDbType.NVarChar, ParameterDirection.Input, "Folder", -1));
sqlCommand.Parameters.Add(new SqlParameter("@project_name", SqlDbType.NVarChar, ParameterDirection.Input, "Project", -1));
sqlCommand.Parameters.Add(new SqlParameter("@packages_table", SqlDbType.Structured, ParameterDirection.Input, packageTable, -1));
var result = sqlCommand.Parameters.Add("RetVal", SqlDbType.Int);
result.Direction = ParameterDirection.ReturnValue;
sqlCommand.ExecuteNonQuery();
}
}
Deploy packages using the Management Object Model API
The following code example demonstrates the use of the Management Object Model API to deploy packages to server.
static void Main()
{
// Before deploying packages, make sure the destination project exists in SSISDB.
var connectionString = "Data Source=.;Integrated Security=True;MultipleActiveResultSets=false";
var catalogName = "SSISDB";
var folderName = "Folder";
var projectName = "Project";
// Get the folder instance.
var sqlConnection = new SqlConnection(connectionString);
var store = new Microsoft.SqlServer.Management.IntegrationServices.IntegrationServices(sqlConnection);
var folder = store.Catalogs[catalogName].Folders[folderName];
// Key is package name without extension and value is package binaries.
var packageDict = new Dictionary<string, string>();
var packageData = File.ReadAllText(@"C:\Folder\Package.dtsx");
packageDict.Add("Package", packageData);
// Deploy package to the destination project.
folder.DeployPackages(projectName, packageDict);
}
Convert to Package Deployment Model Dialog Box
The Convert to Package Deployment Model command allows you to convert a package to the package deployment model after checking the project and each package in the project for compatibility with that model. If a package uses features unique to the project deployment model, such as parameters, then the package cannot be converted.
Converting a package to the package deployment model requires two steps.
When you select the Convert to Package Deployment Model command from the Project menu, the project and each package are checked for compatibility with this model. The results are displayed in the Results table.
If the project or a package fails the compatibility test, click Failed in the Result column for more information. Click Save Report to save a copy of this information to a text file.
If the project and all packages pass the compatibility test, then click OK to convert the package.
Note
To convert a project to the project deployment model, use the Integration Services Project Conversion Wizard. For more information, see Integration Services Project Conversion Wizard.
Integration Services Deployment Wizard
The Integration Services Deployment Wizard supports two deployment models:
- Project deployment model
- Package deployment model
The Project Deployment model allows you to deploy a SQL Server Integration Services (SSIS) project as a single unit to the SSIS Catalog.
The Package Deployment model allows you to deploy packages that you have updated to the SSIS Catalog without having to deploy the whole project.
Note
The Wizard default deployment is the Project Deployment model.
Launch the wizard
Launch the wizard by either:
- Typing "SQL Server Deployment Wizard" in Windows Search
or
- Search for the executable file ISDeploymentWizard.exe under the SQL Server installation folder; for example: "C:\Program Files (x86)\Microsoft SQL Server\130\DTS\Binn".
Note
If you see the Introduction page, click Next to switch to the Select Source page.
The settings on this page are different for each deployment model. Follow steps in the Project Deployment Model section or Package Deployment Model section based on the model you selected in this page.
Project Deployment Model
Select Source
To deploy a project deployment file that you created, select Project deployment file and enter the path to the .ispac file. To deploy a project that resides in the Integration Services catalog, select Integration Services catalog, and then enter the server name and the path to the project in the catalog. Click Next to see the Select Destination page.
Select Destination
To select the destination folder for the project in the Integration Services catalog, enter the SQL Server instance or click Browse to select from a list of servers. Enter the project path in SSISDB or click Browse to select it. Click Next to see the Review page.
Review (and deploy)
The page allows you to review the settings you have selected. You can change your selections by clicking Previous, or by clicking any of the steps in the left pane. Click Deploy to start the deployment process.
Results
After the deployment process is complete, you should see the Results page. This page displays the success or failure of each action. If the action fails, click the Failed in the Result column to display an explanation of the error. Click Save Report... to save the results to an XML file or Click Close to exit the wizard.
Package Deployment Model
Select Source
The Select Source page in the Integration Services Deployment Wizard shows settings specific to the package deployment model when you selected the Package Deployment option for the deployment model.
To select the source packages, click the Browse... button to select the folder that contains the packages or type the folder path in the Packages folder path textbox and click Refresh button at the bottom of the page. Now, you should see all the packages in the specified folder in the list box. By default, all the packages are selected. Click the checkbox in the first column to choose which packages you want to be deployed to server.
Refer to the Status and Message columns to verify the status of package. If the status is set to Ready or Warning, the deployment wizard would not block the deployment process. If the status is set to Error, the wizard wouldn't proceed to deploy the selected packages. To view the detailed Warning or Error messages, click the link in the Message column.
If the sensitive data or package data are encrypted with a password, type the password in the Password column and click the Refresh button to verify whether the password is accepted. If the password is correct, the status would change to Ready and the warning message will disappear. If there are multiple packages with the same password, select the packages with the same encryption password, type the password in the Password textbox and select the Apply button. The password would be applied to the selected packages.
If the status of all the selected packages is not set to Error, the Next button will be enabled so that you can continue with the package deployment process.
Select Destination
After selecting package sources, click the Next button to switch to the Select Destination page. Packages must be deployed to a project in the SSIS Catalog (SSISDB). Before deploying packages, ensure the destination project already exists in the SSIS Catalog. Create an empty project if a project does not exist. In the Select Destination page, type the server name in the Server Name textbox or click the Browse... button to select a server instance. Then click the Browse... button next to the Path textbox to specify the destination project. If the project does not exist, click the New project... button to create an empty project as the destination project. The project must be created under a folder.
Review and deploy
Click Next on the Select Destination page to switch to the Review page in the Integration Services Deployment Wizard. In the review page, review the summary report about the deployment action. After the verification, click the Deploy button to perform the deployment action.
Results
After the deployment is complete, you should see the Results page. On the Results page, review results from each step in the deployment process. Click Save Report to save the deployment report or Close to the close the wizard.
Create and Map a Server Environment
You create a server environment to specify runtime values for packages contained in a project you've deployed to the Integration Services server. You can then map the environment variables to parameters, for a specific package, for entry-point packages, or for all the packages in a given project. An entry-point package is typically a parent package that executes a child package.
Important
For a given execution, a package can execute only with the values contained in a single server environment.
You can query views for a list of server environments, environment references, and environment variables. You can also call stored procedures to add, delete, and modify environments, environment references, and environment variables. For more information, see the Server Environments, Server Variables, and Server Environment References section in SSIS Catalog.
To create and use a server environment
In Management Studio, expand the Integration Services Catalogs SSISDB node in Object Explorer, and locate the Environments folder of the project for which you want to create an environment.
Right-click the Environments folder, and then click Create Environment.
Type a name for the environment and optionally add a description. Click OK.
Right-click the new environment and then click Properties.
On the Variables page, do the following to add a variable.
Select the Type for the variable. The name of the variable does not need to match the name of the project parameter that you map to the variable.
Enter an optional Description for the variable.
Enter the Value for the environment variable.
For information about the rules for environment variable names, see the Environment Variable section in SSIS Catalog.
Indicate whether the variable contains sensitive value, by selecting or clearing the Sensitive checkbox.
If you select Sensitive, the variable value does not display in the Value field.
Sensitive values are encrypted in the SSISDB catalog. For more information about the encryption, see SSIS Catalog.
On the Permissions page, grant or deny permissions for selected users and roles by doing the following.
Click Browse, and then select one or more users and roles in the Browse All Principals dialog box.
In the Logins or roles area, select the user or role that you want to grant or deny permissions for.
In the Explicit area, select Grant or Deny next to each permission.
To script the environment, click Script. By default, the script displays in a new Query Editor window.
Tip
You need to click Script after you've made one or changes to the environment properties, such as adding a variable, and before you click OK in the Environment Properties dialog box. Otherwise, a script is not generated.
Click OK to save your changes to the environment properties.
Under the SSISDB node in Object Explorer, expand the Projects folder, right-click the project, and then click Configure.
On the References page, click Add to add an environment, and then click OK to save the reference to the environment.
Right-click the project again, and then click Configure.
To map the environment variable to a parameter that you added to the package at design-time or to a parameter that was generated when you converted the Integration Services project to the project deployment model, do the following:
In the Parameters tab on the Parameters page, click the browse button next to the Value field.
Click Use environment variable, and then select the environment variable you created.
To map the environment variable to a connection manager property, do the following. Parameters are automatically generated on the SSIS server for the connection manager properties.
In the Connection Managers tab on the Parameters page, click the browse button next to the Value field.
Click Use environment variable, and then select the environment variable you created.
Click OK twice to save your changes.
Deploy and Execute SSIS Packages using Stored Procedures
When you configure an Integration Services project to use the project deployment model, you can use stored procedures in the SSIS catalog to deploy the project and execute the packages. For information about the project deployment model, see Deployment of Projects and Packages.
You can also use SQL Server Management Studio or SQL Server Data Tools (SSDT) to deploy the project and execute the packages. For more information, see the topics in the See Also section.
Tip
You can easily generate the Transact-SQL statements for the stored procedures listed in the procedure below, with the exception of catalog.deploy_project, by doing the following:
In SQL Server Management Studio, expand the Integration Services Catalogs node in Object Explorer and navigate to the package you want to execute.
Right-click the package, and then click Execute.
As needed, set parameters values, connection manager properties, and options in the Advanced tab such as the logging level.
For more information about logging levels, see Enable Logging for Package Execution on the SSIS Server.
Before clicking OK to execute the package, click Script. The Transact-SQL appears in a Query Editor window in SQL Server Management Studio.
To deploy and execute a package using stored procedures
Call catalog.deploy_project (SSISDB Database) to deploy the Integration Services project that contains the package to the Integration Services server.
To retrieve the binary contents of the Integration Services project deployment file, for the @project_stream parameter_, use a SELECT statement with the OPENROWSET function and the BULK rowset provider. The BULK rowset provider enables you to read data from a file. The SINGLE_BLOB argument for the BULK rowset provider returns the contents of the data file as a single-row, single-column rowset of type varbinary(max). For more information, see OPENROWSET (Transact-SQL).
In the following example, the SSISPackages_ProjectDeployment project is deployed to the SSIS Packages folder on the Integration Services server. The binary data is read from the project file (SSISPackage_ProjectDeployment.ispac) and is stored in the _@ProjectBinary parameter of type varbinary(max). The @ProjectBinary parameter value is assigned to the @project_stream parameter.
DECLARE @ProjectBinary as varbinary(max) DECLARE @operation_id as bigint Set @ProjectBinary = (SELECT * FROM OPENROWSET(BULK 'C:\MyProjects\ SSISPackage_ProjectDeployment.ispac', SINGLE_BLOB) as BinaryData) Exec catalog.deploy_project @folder_name = 'SSIS Packages', @project_name = 'DeployViaStoredProc_SSIS', @Project_Stream = @ProjectBinary, @operation_id = @operation_id out
Call catalog.create_execution (SSISDB Database) to create an instance of the package execution, and optionally call catalog.set_execution_parameter_value (SSISDB Database) to set runtime parameter values.
In the following example, catalog.create_execution creates an instance of execution for package.dtsx that is contained in the SSISPackage_ProjectDeployment project. The project is located in the SSIS Packages folder. The execution_id returned by the stored procedure is used in the call to catalog.set_execution_parameter_value. This second stored procedure sets the LOGGING_LEVEL parameter to 3 (verbose logging) and sets a package parameter named Parameter1 to a value of 1.
For parameters such as LOGGING_LEVEL the object_type value is 50. For package parameters the object_type value is 30.
Declare @execution_id bigint EXEC [SSISDB].[catalog].[create_execution] @package_name=N'Package.dtsx', @execution_id=@execution_id OUTPUT, @folder_name=N'SSIS Packages', @project_name=N'SSISPackage_ProjectDeployment', @use32bitruntime=False, @reference_id=1 Select @execution_id DECLARE @var0 smallint = 3 EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'LOGGING_LEVEL', @parameter_value=@var0 DECLARE @var1 int = 1 EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'Parameter1', @parameter_value=@var1 GO
Call catalog.start_execution (SSISDB Database) to execute the package.
In the following example, a call to catalog.start_execution is added to the Transact-SQL to start the package execution. The execution_id returned by the catalog.create_execution stored procedure is used.
Declare @execution_id bigint EXEC [SSISDB].[catalog].[create_execution] @package_name=N'Package.dtsx', @execution_id=@execution_id OUTPUT, @folder_name=N'SSIS Packages', @project_name=N'SSISPackage_ProjectDeployment', @use32bitruntime=False, @reference_id=1 Select @execution_id DECLARE @var0 smallint = 3 EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'LOGGING_LEVEL', @parameter_value=@var0 DECLARE @var1 int = 1 EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'Parameter1', @parameter_value=@var1 EXEC [SSISDB].[catalog].[start_execution] @execution_id GO
To deploy a project from server to server using stored procedures
You can deploy a project from server to server by using the catalog.get_project (SSISDB Database) and catalog.deploy_project (SSISDB Database) stored procedures.
You need to do the following before running the stored procedures.
Create a linked server object. For more information, see Create Linked Servers (SQL Server Database Engine).
On the Server Options page of the Linked Server Properties dialog box, set RPC and RPC Out to True. Also, set Enable Promotion of Distributed Transactions for RPC to False.
Enable dynamic parameters for the provider you selected for the linked server, by expanding the Providers node under Linked Servers in Object Explorer, right-clicking the provider, and then clicking Properties. Select Enable next to Dynamic parameter.
Confirm that the Distributed Transaction Coordinator (DTC) is started on both servers.
Call catalog.get_project to return the binary for the project, and then call catalog.deploy_project. The value returned by catalog.get_project is inserted into a table variable of type varbinary(max). The linked server can't return results that are varbinary(max).
In the following example, catalog.get_project returns a binary for the SSISPackages project on the linked server. The catalog.deploy_project deploys the project to the local server, to the folder named DestFolder.
declare @resultsTableVar table (
project_binary varbinary(max)
)
INSERT @resultsTableVar (project_binary)
EXECUTE [MyLinkedServer].[SSISDB].[catalog].[get_project] 'Packages', 'SSISPackages'
declare @project_binary varbinary(max)
select @project_binary = project_binary from @resultsTableVar
exec [SSISDB].[CATALOG].[deploy_project] 'DestFolder', 'SSISPackages', @project_binary
Integration Services Project Conversion Wizard
The Integration Services Project Conversion Wizard converts a project to the project deployment model.
Note
If the project contains one or more datasources, the datasources are removed when the project conversion is completed. To create a connection to a data source that can be shared by the packages in the project, add a connection manager at the project level. For more information, see Add, Delete, or Share a Connection Manager in a Package.
What do you want to do?
Open the Integration Services Project Conversion Wizard
Do one of the following to open the Integration Services Project Conversion Wizard.
Open the project in Visual Studio, and then in Solution Explorer, right-click the project and click Convert to Project Deployment Model.
From Object Explorer in Management Studio, right-click the Projects node in the Integration Services Catalog and select Import Packages.
Depending on whether you run the Integration Services Project Conversion Wizard from Visual Studio or from SQL Server Management Studio, the wizard performs different conversion tasks.
Set Options on the Locate Packages Page
Note
The Locate Packages page is available only when you run the wizard from Management Studio.
The following option displays on the page when you select File system in the Source drop-down list. Select this option when the package is resides in the file system.
Folder
Type the package path, or navigate to the package by clicking Browse.
The following options display on the page when you select SSIS Package Store in the Source drop-down list. For more information about the package store, see Package Management (SSIS Service).
Server
Type the server name or select the server.
Folder
Type the package path, or navigate to the package by clicking Browse.
The following options display on the page when you select Microsoft SQL Server in the Source drop-down list. Select this option when the package resides in Microsoft SQL Server.
Server
Type the server name or select the server.
Use Windows authentication
Microsoft Windows Authentication mode allows a user to connect through a Windows user account. If you use Windows Authentication, you do not need to provide a user name or password.
Use SQL Server authentication
When a user connects with a specified login name and password from a non-trusted connection, SQL Server authenticates the connection by checking to see if a SQL Server login account has been set up and if the specified password matches the one previously recorded. If SQL Server does not have a login account set, authentication fails, and the user receives an error message.
User name
Specify a user name when you are using SQL Server Authentication.
Password
Provide the password when you are using SQL Server Authentication.
Folder
Type the package path, or navigate to the package by clicking Browse.
Set Options on the Select Packages Page
Package Name
Lists the package file.
Status
Indicates whether a package is ready to convert to the project deployment model.
Message
Displays a message associated with the package.
Password
Displays a password associated with the package. The password text is hidden.
Apply to selection
Click to apply the password in the Password text box, to the selected package or packages.
Refresh
Refreshes the list of packages.
Set Options on the Select Destination Page
On this page, specify the name and path for a new project deployment file (.ispac) or select an existing file.
Note
The Select Destination page is available only when you run the wizard from Management Studio.
Output path
Type the path for the deployment file or navigate to the file by clicking Browse.
Project name
Type the project name.
Protection level
Select the protection level. For more information, see Access Control for Sensitive Data in Packages.
Project description
Type an optional description for the project.
Set Options on the Specify Project Properties Page
Note
The Specify Project Properties page is available only when you run the wizard from Visual Studio.
Project name
Lists the project name.
Protection level
Select a protection level for the packages contained in the project. For more information about protection levels, see Access Control for Sensitive Data in Packages.
Project description
Type an optional project description.
Set Options on the Update Execute Package Task Page
Update Execute Package Tasks contain in the packages, to use a project-based reference. For more information, see Execute Package Task Editor.
Parent Package
Lists the name of the package that executes the child package using the Execute Package task.
Task name
Lists the name of the Execute Package task.
Original reference
Lists the current path of the child package.
Assign reference
Select a child package stored in the project.
Set Options on the Select Configurations Page
Select the package configurations that you want to replace with parameters.
Package
Lists the package file.
Type
Lists the type of configuration, such as an XML configuration file.
Configuration String
Lists the path of the configuration file.
Status
Displays a status message for the configuration. Click the message to view the entire message text.
Add Configurations
Add package configurations contained in other projects to the list of available configurations that you want to replace with parameters. You can select configurations stored in a file system or stored in SQL Server.
Refresh
Click to refresh the list of configurations.
Remove configurations from all packages after conversion
It is recommended that you remove all configurations from the project by selecting this option.
If you don't select this option, only the configurations that you selected to replace with parameters are removed.
Set Options on the Create Parameters Page
Select the parameter name and scope for each configuration property.
Package
Lists the package file.
Parameter Name
Lists the parameter name.
Scope
Select the scope of the parameter, either package or project.
Set Options on the Configure Parameters Page
Name
Lists the parameter name.
Scope
Lists the scope of the parameter.
Value
Lists the parameter value.
Click the ellipsis button next to the value field to configure the parameter properties.
In the Set Parameter Details dialog box, you can edit the parameter value. You can also specify whether the parameter value must be provided when you run the package.
You can modify value in the Parameters page of the Configure dialog box in Management Studio, by clicking the browse button next to the parameter. The Set Parameter Value dialog box appears.
The Set Parameter Details dialog box also lists the data type of the parameter value and the origin of the parameter.
Set the Options on the Review page
Use the Review page to confirm the options that you've selected for the conversion of the project.
Previous
Click to change an option.
Convert
Click to convert the project to the project deployment model.
Set the Options on the Perform Conversion
The Perform Conversion page shows status of the project conversion.
Action
Lists a specific conversion step.
Result
Lists the status of each conversion step. Click the status message for more information.
The project conversion is not saved until the project is saved in Visual Studio.
Save report
Click to save a summary of the project conversion in an .xml file.