Rediģēt

Kopīgot, izmantojot

Try Microsoft Defender for Office 365

  • Raksts

As an existing Microsoft 365 customer, the Trials and Evaluation pages in the Microsoft Defender portal at https://security.microsoft.com allow you to try the features of Microsoft Defender for Office 365 Plan 2 before you buy.

Before you try Defender for Office 365 Plan 2, there are some key questions that you need to ask yourself:

  • Do I want to passively observe what Defender for Office 365 Plan 2 can do for me (audit), or do I want Defender for Office 365 Plan 2 to take direct action on issues that it finds (block)?
  • Either way, how can I tell what Defender for Office 365 Plan 2 is doing for me?
  • How long do I have before I need to make the decision to keep Defender for Office 365 Plan 2?

This article helps you answer those questions so you can try Defender for Office 365 Plan 2 in a way that best meets the needs of your organization.

For a companion guide for how to use your trial, see Trial User Guide: Microsoft Defender for Office 365.

Note

Trials and evaluations of Defender for Office 365 aren't available in U.S. Government organizations (Microsoft 365 GCC, GCC High, and DoD) or Microsoft 365 Education organizations.

Overview of Defender for Office 365

Defender for Office 365 helps organizations secure their enterprise by offering a comprehensive slate of capabilities. For more information, see Microsoft Defender for Office 365.

You can also learn more about Defender for Office 365 at this interactive guide.

Microsoft Defender for Office 365 conceptual diagram.

Watch this short video to learn more about how you can get more done in less time with Microsoft Defender for Office 365.

For pricing information, see Microsoft Defender for Office 365.

How trials and evaluations work for Defender for Office 365

Policies

Defender for Office 365 includes the features of Exchange Online Protection (EOP), which are present in all Microsoft 365 organizations with Exchange Online mailboxes, and features that are exclusive to Defender for Office 365.

The protection features of EOP and Defender for Office 365 are implemented using policies. Policies that are exclusive to Defender for Office 365 are created for you as needed:

Your eligibility for an evaluation or trial means you already have EOP. No new or special EOP policies are created for your evaluation or trial of Defender for Office 365 Plan 2. Existing EOP policies in your Microsoft 365 organization remain able to act on messages (for example, send messages to the Junk Email folder or to quarantine):

The default policies for these EOP features are always on, apply to all recipients, and are always applied last after any custom policies.

Audit mode vs. blocking mode for Defender for Office 365

Do you want your Defender for Office 365 experience to be active or passive? The following modes are available:

  • Audit mode: Special evaluation policies are created for anti-phishing (which includes impersonation protection), Safe Attachments, and Safe Links. These evaluation policies are configured to detect threats only. Defender for Office 365 detects harmful messages for reporting, but the messages aren't acted upon (for example, detected messages aren't quarantined). The settings of these evaluation policies are described in the Policies in audit mode section later in this article. We also automatically turn on SafeLinks time of click protection in audit mode for non-email workloads (for example, Microsoft Teams, SharePoint, and OneDrive for Business)

    You can also selectively turn on or turn off anti-phishing protection (spoofing and impersonation), Safe Links protection, and Safe Attachments protection. For instructions, see Manage evaluation settings.

    Audit mode provides specialized reports for threats that are detected by the evaluation policies on the Microsoft Defender for Office 365 evaluation page at https://security.microsoft.com/atpEvaluation. These reports are described in the Reports for audit mode section later in this article.

  • Blocking mode: The Standard template for preset security policies is turned on and used for the trial, and the users you specify to include in the trial are added to the Standard preset security policy. Defender for Office 365 detects and takes action on harmful messages (for example, detected messages are quarantined).

    The default and recommended selection is to scope these Defender for Office 365 policies to all users in the organization. But during or after the setup of your trial, you can change the policy assignment to specific users, groups, or email domains in the Microsoft Defender portal or in Exchange Online PowerShell.

    Information about threats that are detected by Defender for Office 365 is available in the regular reports and investigation features of Defender for Office 365 Plan 2, which are described in the Reports for blocking mode section later in this article.

The key factors that determine which modes are available to you are:

  • Whether or not you currently have Defender for Office 365 (Plan 1 or Plan 2) as described in the next section.

  • How email is delivered to your Microsoft 365 organization as described in the following scenarios:

    • Mail from the internet flows directly Microsoft 365, but your current subscription has only Exchange Online Protection (EOP) or Defender for Office 365 Plan 1.

      Mail flows from the internet into Microsoft 365, with protection from EOP and/or Defender for Office 365 Plan 1.

      In these environments, audit mode or blocking mode are available, depending on your licensing as explained in the next section

    • You're currently using a third-party service or device for email protection of your Microsoft 365 mailboxes. Mail from the internet flows through the protection service before delivery into your Microsoft 365 organization. Microsoft 365 protection is as low as possible (it's never completely off; for example, malware protection is always enforced).

      Mail flows from the internet through the third-party protection service or device before delivery into Microsoft 365.

      In these environments, only audit mode is available. You don't need to change your mail flow (MX records) to evaluate Defender for Office 365 Plan 2.

Evaluation vs. trial for Defender for Office 365

What's the difference between an evaluation and a trial of Defender for Office 365 Plan 2? Aren't they the same thing? Well, yes and no. The licensing in your Microsoft 365 organization makes all the difference:

  • No Defender for Office 365 Plan 2: If you don't already have Defender for Office 365 Plan 2 (for example, you have standalone EOP, Microsoft 365 E3, Microsoft 365 Business Premium, or a Defender for Office 365 Plan 1 add-on subscription), you can start the Defender for Office 365 Plan 2 experience from the following locations in the Microsoft Defender portal:

    You can select audit mode (evaluation policies) or blocking mode (Standard preset security policy) during the set up of the evaluation or trial.

    Regardless of which location you use, we automatically provision any required Defender for Office 365 Plan 2 licenses when you enroll. Manually getting and assigning Plan 2 licenses in the Microsoft 365 admin center isn't required.

    The automatically provisioned licenses are good for 90 days. What this 90 day period means depends the existing licensing in your organization:

    • No Defender for Office 365 Plan 1: For organizations without Defender for Office 365 Plan 1 (for example, standalone EOP or Microsoft 365 E3) all Defender for Office 365 Plan 2 features (in particular, the security policies) are available during the 90 day period only.

    • Defender for Office 365 Plan 1: Organizations with Defender for Office 365 Plan 1 (for example, Microsoft 365 Business Premium or add-on subscriptions) already have the same security policies that are available in Defender for Office 365 Plan 2: impersonation protection in anti-phishing policies, Safe Attachments policies, and Safe Links policies.

      The security policies from audit mode (evaluation policies) or blocking mode (Standard preset security policy) don't expire or stop working after 90 days. What ends after 90 days are the automation, investigation, remediation, and education capabilities of Defender for Office 365 Plan 2 that aren't available in Plan 1.

    If you set up your evaluation or trial in audit mode (evaluation policies), you can later convert to blocking mode (Standard preset security policy). For instructions, see the Convert to Standard protection section later in this article.

  • Defender for Office 365 Plan 2: If you already have Defender for Office 365 Plan 2 (for example, as part of a Microsoft 365 E5 subscription), Defender for Office 365 isn't available to select on the Microsoft 365 trials page at https://security.microsoft.com/trialHorizontalHub.

    Your only option is to set up an evaluation of Defender for Office 365 on the Microsoft Defender for Office 365 evaluation page at https://security.microsoft.com/atpEvaluation. Furthermore, the evaluation is automatically set up in Audit mode (evaluation policies).

    Later, you can convert to blocking mode (Standard preset security policy) using the Convert to standard action on the Microsoft Defender for Office 365 evaluation page or by turning off the evaluation on the Microsoft Defender for Office 365 evaluation page and then configuring the Standard preset security policy.

    By definition, organizations with Defender for Office 365 Plan 2 don't require additional licenses to evaluate Defender for Office 365 Plan 2, so evaluations in these organizations are unlimited in duration.

The information from the previous list is summarized in the following table:

Organization Enroll from
the Trials page?		 Enroll from
the Evaluation page?		 Available modes Evaluation
period
Standalone EOP (no Exchange Online mailboxes)

Microsoft 365 E3		 Yes Yes Audit mode

Blocking mode¹		 90 days
Defender for Office 365 Plan 1

Microsoft 365 Business Premium		 Yes Yes Audit mode

Blocking mode¹		 90 days²
Microsoft 365 E5 No Yes Audit mode

Blocking mode¹ ³		 Unlimited

¹ As previously described, blocking mode (Standard preset security policy) isn't available if internet mail flows through a third-party protection service or device before delivery to Microsoft 365.

² The security policies from audit mode (evaluation policies) or blocking mode (Standard preset security policy) don't expire or stop working after 90 days. The automation, investigation, remediation, and education capabilities that are exclusive to Defender for Office 365 Plan 2 stop working after 90 days.

³ The evaluation is set up in audit mode (evaluation policies). At any point after the setup is complete, you can convert to blocking mode (Standard preset security policy) as described in Convert to Standard protection.

Now that you understand the differences between evaluations, trials, audit mode, and blocking mode, you're ready to set up your evaluation or trial as described in the next sections.

Set up an evaluation or trial in audit mode

Remember, when you evaluate or try Defender for Office 365 in audit mode, special evaluation policies are created so Defender for Office 365 can detect threats. The settings of these evaluation policies are described in the Policies in audit mode section later in this article.

  1. Start the evaluation in any of the available locations in the Microsoft Defender portal at https://security.microsoft.com. For example:

  2. The Turn on protection dialog isn't available in organizations with Defender for Office 365 Plan 1 or Plan 2.

    In the Turn on protection dialog, select No, I only want reporting, and then select Continue.

  3. In the Select the users you want to include dialog, configure the following settings:

    • All users: This is the default and recommended option.

    • Specific users: If you select this option, you need to select the internal recipients that the evaluation applies to:

      • Users: The specified mailboxes, mail users, or mail contacts.
      • Groups:
        • Members of the specified distribution groups or mail-enabled security groups (dynamic distribution groups aren't supported).
        • The specified Microsoft 365 Groups.
      • Domains: All recipients in the organization with a primary email address in the specified accepted domain.

      Click in the box, start typing a value, and select the value from the results below the box. Repeat this process as many times as necessary. To remove an existing value, select next to the value in the box.

      For users or groups, you can use most identifiers (name, display name, alias, email address, account name, etc.), but the corresponding display name is shown in the results. For users, enter an asterisk (*) by itself to see all available values.

      You can use a recipient condition only once, but the condition can contain multiple values:

      • Multiple values of the same condition use OR logic (for example, <recipient1> or <recipient2>). If the recipient matches any of the specified values, the policy is applied to them.

      • Different types of conditions use AND logic. The recipient must match all of the specified conditions for the policy to apply to them. For example, you configure a condition with the following values:

        • Users: romain@contoso.com
        • Groups: Executives

        The policy is applied to romain@contoso.com only if he's also a member of the Executives group. Otherwise, the policy isn't applied to him.

    When you're finished in the Select the users you want to include dialog, select Continue.

  4. In the Help us understand your mail flow dialog, configure the following options:

    • One of the following options is automatically selected based on our detection of the MX record for your domain:

      • I'm using a third-party and/or on-premises service provider: The MX record for your domain points somewhere other than Microsoft 365. Verify or configure the following settings:

        • Third party service your organization is using: Verify or select one of the following values:

          • Other: This value also requires information in If your email messages pass through multiple gateways, list each gateway IP address, which is available only for the value Other. Use this value if you're using an on-premises service provider.

            Enter a comma-separated list of the IP addresses that are used by the third-party protection service or device to send mail into Microsoft 365.

          • Barracuda

          • IronPort

          • Mimecast

          • Proofpoint

          • Sophos

          • Symantec

          • Trend Micro

        • The connector to apply this evaluation to: Select the connector that's used for mail flow into Microsoft 365.

          Enhanced Filtering for Connectors (also known as skip listing) is automatically configured on the connector that you specify.

          When a third-party service or device sits in front of email flowing into Microsoft 365, Enhanced Filtering for Connectors correctly identifies the source of internet messages and greatly improves the accuracy of the Microsoft filtering stack (especially spoof intelligence, as well as post-breach capabilities in Threat Explorer and Automated Investigation & Response (AIR).

      • I'm only using Microsoft Exchange Online: The MX records for your domain point to Microsoft 365. There's nothing left to configure, so select Finish.

    • Share data with Microsoft: This option isn't selected by default, but you can select the check box if you like.

    When you're finished in the Help us understand your mail flow dialog, select Finish.

  5. When set up is complete, you get a Let us show you around dialog. Select Start tour or Dismiss.

Set up an evaluation or trial in blocking mode

Remember, when you try Defender for Office 365 in blocking mode, the Standard preset security is turned on and the specified users (some or everyone) are included in the Standard preset security policy. For more information about the Standard preset security policy, see Preset security policies.

  1. Start the trial in any of the available locations in the Microsoft Defender portal at https://security.microsoft.com. For example:

  2. The Turn on protection dialog isn't available in organizations with Defender for Office 365 Plan 1 or Plan 2.

    In the Turn on protection dialog, select Yes, protect my organization by blocking threats, and then select Continue.

  3. In the Select the users you want to include dialog, configure the following settings:

    • All users: This is the default and recommended option.

    • Select users: If you select this option, you need to select the internal recipients that the trial applies to:

      • Users: The specified mailboxes, mail users, or mail contacts.
      • Groups:
        • Members of the specified distribution groups or mail-enabled security groups (dynamic distribution groups aren't supported).
        • The specified Microsoft 365 Groups.
      • Domains: All recipients in the organization with a primary email address in the specified accepted domain.

      Click in the box, start typing a value, and select the value from the results below the box. Repeat this process as many times as necessary. To remove an existing value, select next to the value in the box.

      For users or groups, you can use most identifiers (name, display name, alias, email address, account name, etc.), but the corresponding display name is shown in the results. For users, enter an asterisk (*) by itself to see all available values.

      You can use a recipient condition only once, but the condition can contain multiple values:

      • Multiple values of the same condition use OR logic (for example, <recipient1> or <recipient2>). If the recipient matches any of the specified values, the policy is applied to them.

      • Different types of conditions use AND logic. The recipient must match all of the specified conditions for the policy to apply to them. For example, you configure a condition with the following values:

        • Users: romain@contoso.com
        • Groups: Executives

        The policy is applied to romain@contoso.com only if he's also a member of the Executives group. Otherwise, the policy isn't applied to him.

    When you're finished in the Select the users you want to include dialog, select Continue.

  4. A progress dialog appears as your evaluation is set up. When setup is complete, select Done.

Manage your evaluation or trial of Defender for Office 365

After you set up your evaluation or trial in audit mode, the Microsoft Defender for Office 365 evaluation page at https://security.microsoft.com/atpEvaluation is your central location for the results of trying Defender for Office 365 Plan 2.

In the Microsoft Defender portal at https://security.microsoft.com, go to Email & collaboration > Policies & rules > Threat policies > select Evaluation mode in the Others section. Or, to go directly to the Microsoft Defender for Office 365 evaluation page, use https://security.microsoft.com/atpEvaluation.

The actions that are available on the Microsoft Defender for Office 365 evaluation page are described in the following subsections.

Manage evaluation settings

On the Microsoft Defender for Office 365 evaluation page at https://security.microsoft.com/atpEvaluation, select Manage evaluation settings.

In the Manage MDO evaluation settings flyout that opens, the following information and settings are available:

  • Whether the evaluation is on is shown at the top of the flyout (Evaluation on or Evaluation off). This information is also available on the Microsoft Defender for Office 365 evaluation page.

    The Turn off or Turn on action allows you to turn off or turn on the evaluation policies.

  • How many days are left in the evaluation is shown at the top of the flyout (nn days remaining).

  • Detection capabilities section: Use the toggles to turn on or turn off the following Defender for Office 365 protections:

    • Safe Links
    • Safe Attachments
    • Anti-phishing

  • Users, groups, and domains section: Select Edit users, groups, and domains to change who the evaluation or trial applies to as described earlier in Set up an evaluation or trial in audit mode.

  • Impersonation settings section:

    • If impersonation protection isn't configured in the anti-phishing evaluation policy, select Apply impersonation protection to configure impersonation protection:

      • Internal and external users (senders) for user impersonation protection.
      • Custom domains for domain impersonation protection.
      • Trusted senders and domains to exclude from impersonation protection.

      The steps are essentially the same as described in the Impersonation section in Step 5 at Use the Microsoft Defender portal to create anti-phishing policies.

    • If impersonation protection is configured in the anti-phishing evaluation policy, this section shows the impersonation protection settings for:

      • User impersonation protection
      • Domain impersonation protection
      • Trusted impersonated senders and domains

      To modify the settings, select Edit impersonation settings.

When you're finished in the Manage MDO evaluation settings flyout, select Close.

Convert to Standard protection

For your evaluation or trial, you can switch from audit mode (evaluation policies) to blocking mode (Standard preset security policy) using either of the following methods:

  • On the Microsoft Defender for Office 365 evaluation page: Select Convert to standard protection
  • In the Manage MDO evaluation settings flyout: On the Microsoft Defender for Office 365 evaluation page, select Manage evaluation settings. In the details flyout that opens, select Convert to standard protection.

After you select Convert to standard protection, read the information in the dialog that opens, and then select Continue.

You're taken to the Apply standard protection wizard on the Preset security policies page. The list of recipients that are included and excluded from the evaluation or trial are copied into the Standard preset security policy. For more information, see Use the Microsoft Defender portal to assign Standard and Strict preset security policies to users.

  • The security policies in the Standard preset security policy have a higher priority than the evaluation policies, which means the policies in the Standard preset security are always applied before the evaluation policies, even if both are present and turned on.
  • There's no automatic way to go from blocking mode to audit mode. The manual steps are:

    1. Turn off the Standard preset security policy on the Preset security policies page at https://security.microsoft.com/presetSecurityPolicies.

    2. On the Microsoft Defender for Office 365 evaluation page at https://security.microsoft.com/atpEvaluation, verify the value Evaluation on is shown.

      If Evaluation off is shown, select Manage evaluation settings. In the Manage MDO evaluation settings flyout that opens, select Turn on.

    3. Select Manage evaluation settings to verify the users that the evaluation applies to in the Users, groups, and domains section in the Manage MDO evaluation settings details flyout that opens.

Reports for your evaluation or trial of Defender for Office 365

This section describes the reports that are available in audit mode and blocking mode.

Reports for blocking mode

No special reports are created for blocking mode, so use the standard reports that are available in Defender for Office 365. Specifically, you're looking for reports that apply only to Defender for Office 365 features (for example, Safe Links or Safe Attachments) or reports that can be filtered by Defender for Office 365 detections as described in the following list:

Reports for audit mode

In audit mode, you're looking for reports that show detections by the evaluation policies as described in the following list:

Required permissions

The following permissions are required in Microsoft Entra ID to set up an evaluation or trial of Defender for Microsoft 365:

  • Create, modify or delete an evaluation or trial: Membership in the Security Administrator or Global Administrator* roles.
  • View evaluation policies and reports in audit mode: Membership in the Security Administrator or Security Reader roles.

For more information about Microsoft Entra permissions in the Microsoft Defender portal, see Microsoft Entra roles in the Microsoft Defender portal

Important

* Microsoft recommends that you use roles with the fewest permissions. Using lower permissioned accounts helps improve security for your organization. Global Administrator is a highly privileged role that should be limited to emergency scenarios when you can't use an existing role.

Frequently asked questions

Q: Do I need to manually get or activate trial licenses?

A: No. The trial automatically provisions Defender for Office 365 Plan 2 licenses if you need them as previously described.

Q: How do I extend the trial?

A: See Extend your trial.

Q: Why do I not see options to cancel or extend the trial?

A: You don't see options to cancel or extend your trial if your subscription is part of the New Commerce Experience (NCE). Currently, only customers on legacy subscriptions have the capability to cancel or extend their trials.

Q: What happens to my data after the trial expires?

A: After your trial expires, you have access to your trial data (data from features in Defender for Office 365 that you didn't have previously) for 30 days. After this 30 day period, all policies and data that were associated with the Defender for Office 365 trial are deleted.

Q: How many times can I use the Defender for Office 365 trial in my organization?

A: A maximum of two times. If your first trial expires, you need to wait at least 30 days after the expiration date before you can enroll in the Defender for Office 365 trial again. After your second trial, you can't enroll in another trial.

Q: In audit mode, are there scenarios where Defender for Office 365 acts on messages?

A: Yes. For the protection of the service, no one in any program or SKU can turn off or bypass taking action on messages that are classified as malware or high confidence phishing by the service.

Q: In what order are policies evaluated?

A: See Order of precedence for preset security policies and other policies.

Policy settings associated with Defender for Office 365 evaluations and trials

Policies in audit mode

Warning

Do not attempt to create, modify, or remove the individual security policies that are associated with the evaluation of Defender for Office 365. The only supported method for creating the individual security policies for the evaluation is to start the evaluation or trial in audit mode in the Microsoft Defender portal for the first time.

As previously described, when you choose audit mode for your evaluation or trial, evaluation policies with the required settings to observe but not take action on messages are automatically created.

To see these policies and their settings, run the following command in Exchange Online PowerShell:

Write-Output -InputObject ("`r`n"*3),"Evaluation anti-phishing policy",("-"*79);Get-AntiPhishPolicy | Where-Object -Property RecommendedPolicyType -eq -Value "Evaluation"; Write-Output -InputObject ("`r`n"*3),"Evaluation Safe Attachments policy",("-"*79);Get-SafeAttachmentPolicy | Where-Object -Property RecommendedPolicyType -eq -Value "Evaluation"; Write-Output -InputObject ("`r`n"*3),"Evaluation Safe Links policy",("-"*79);Get-SafeLinksPolicy | Where-Object -Property RecommendedPolicyType -eq -Value "Evaluation"

The settings are also described in the following tables.

Anti-phishing evaluation policy settings

Setting Value
Name Evaluation Policy
AdminDisplayName Evaluation Policy
AuthenticationFailAction MoveToJmf
DmarcQuarantineAction Quarantine
DmarcRejectAction Reject
Enabled True
EnableFirstContactSafetyTips False
EnableMailboxIntelligence True
EnableMailboxIntelligenceProtection True
EnableOrganizationDomainsProtection False
EnableSimilarDomainsSafetyTips False
EnableSimilarUsersSafetyTips False
EnableSpoofIntelligence True
EnableSuspiciousSafetyTip False
EnableTargetedDomainsProtection False
EnableTargetedUserProtection False
EnableUnauthenticatedSender True
EnableUnusualCharactersSafetyTips False
EnableViaTag True
ExcludedDomains {}
ExcludedSenders {}
HonorDmarcPolicy True
ImpersonationProtectionState Manual
IsDefault False
MailboxIntelligenceProtectionAction NoAction
MailboxIntelligenceProtectionActionRecipients {}
MailboxIntelligenceQuarantineTag DefaultFullAccessPolicy
PhishThresholdLevel 1
PolicyTag blank
RecommendedPolicyType Evaluation
SpoofQuarantineTag DefaultFullAccessPolicy
TargetedDomainActionRecipients {}
TargetedDomainProtectionAction NoAction
TargetedDomainQuarantineTag DefaultFullAccessPolicy
TargetedDomainsToProtect {}
TargetedUserActionRecipients {}
TargetedUserProtectionAction NoAction
TargetedUserQuarantineTag DefaultFullAccessPolicy
TargetedUsersToProtect {}

Safe Attachments evaluation policy settings

Setting Value
Name Evaluation Policy
Action Allow
ActionOnError True*
AdminDisplayName Evaluation Policy
ConfidenceLevelThreshold 80
Enable True
EnableOrganizationBranding False
IsBuiltInProtection False
IsDefault False
OperationMode Delay
QuarantineTag AdminOnlyAccessPolicy
RecommendedPolicyType Evaluation
Redirect False
RedirectAddress blank
ScanTimeout 30

* This parameter has been deprecated and is no longer used.

Setting Value
Name Evaluation Policy
AdminDisplayName Evaluation Policy
AllowClickThrough True
CustomNotificationText blank
DeliverMessageAfterScan True
DisableUrlRewrite True
DoNotRewriteUrls {}
EnableForInternalSenders False
EnableOrganizationBranding False
EnableSafeLinksForEmail True
EnableSafeLinksForOffice True
EnableSafeLinksForTeams True
IsBuiltInProtection False
LocalizedNotificationTextList {}
RecommendedPolicyType Evaluation
ScanUrls True
TrackClicks True

Use PowerShell to configure recipient conditions and exceptions to the evaluation or trial in audit mode

A rule that's associated with the Defender for Office 365 evaluation policies controls the recipient conditions and exceptions to the evaluation.

To view the rule that's associated with the evaluation, run the following command in Exchange Online PowerShell:

Get-ATPEvaluationRule

To use Exchange Online PowerShell to modify who the evaluation applies to, use the following syntax:

Set-ATPEvaluationRule -Identity "Evaluation Rule" -SentTo <"user1","user2",... | $null> -ExceptIfSentTo <"user1","user2",... | $null> -SentToMemberOf <"group1","group2",... | $null> -ExceptIfSentToMemberOf <"group1","group2",... | $null> -RecipientDomainIs <"domain1","domain2",... | $null> -ExceptIfRecipientDomainIs <"domain1","domain2",... | $null>

This example configures exceptions from the evaluation for the specified security operations (SecOps) mailboxes.

Set-ATPEvaluationRule -Identity "Evaluation Rule" -ExceptIfSentTo "SecOps1","SecOps2"

Use PowerShell to turn on or turn off the evaluation or trial in audit mode

To turn on or turn off the evaluation in audit mode, you enable or disable the rule that's associated with the evaluation. The State property value of the evaluation rule shows whether the rule is Enabled or Disabled.

Run the following command to determine whether the evaluation is currently enabled or disabled:

Get-ATPEvaluationRule -Identity "Evaluation Rule" | Format-Table Name,State

Run the following command to turn off the evaluation if it's turned on:

Disable-ATPEvaluationRule -Identity "Evaluation Rule"

Run the following command to turn on the evaluation if it's turned off:

Enable-ATPEvaluationRule -Identity "Evaluation Rule"

Policies in blocking mode

As previously described, blocking mode policies are created using the Standard template for preset security policies.

To use Exchange Online PowerShell to view the individual security policies that are associated with the Standard preset security policy, and to view and configure the recipient conditions and exceptions for the preset security policy, see Preset security policies in Exchange Online PowerShell.