Lazy<T> Konstruktory
Definicja
Ważne
Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.
Inicjuje nowe wystąpienie klasy Lazy<T>.
Przeciążenia
Lazy<T>() |
Inicjuje nowe wystąpienie klasy Lazy<T>. Gdy wystąpi inicjowanie z opóźnieniem, używany jest konstruktor bez parametrów typu docelowego. |
Lazy<T>(Boolean) |
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem używany jest konstruktor bez parametrów typu docelowego i określony tryb inicjowania. |
Lazy<T>(Func<T>) |
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem jest używana określona funkcja inicjowania. |
Lazy<T>(LazyThreadSafetyMode) |
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa konstruktora bez parametrów i określonego trybu bezpieczeństwa wątków |
Lazy<T>(T) |
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa wstępnie określonej wartości. |
Lazy<T>(Func<T>, Boolean) |
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem jest używana określona funkcja inicjowania i tryb inicjowania. |
Lazy<T>(Func<T>, LazyThreadSafetyMode) |
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa określonej funkcji inicjowania i trybu bezpieczeństwa wątków. |
Lazy<T>()
Inicjuje nowe wystąpienie klasy Lazy<T>. Gdy wystąpi inicjowanie z opóźnieniem, używany jest konstruktor bez parametrów typu docelowego.
public:
Lazy();
public Lazy ();
Public Sub New ()
Przykłady
W poniższym przykładzie pokazano użycie tego konstruktora. Ilustruje on również użycie konstruktora (określenie parametru Lazy<T>(Boolean) isThreadSafe
) i konstruktora (określając dla mode
parametru Lazy<T>(LazyThreadSafetyMode) LazyThreadSafetyMode.ExecutionAndPublication ).true
Aby przełączyć się na inny konstruktor, po prostu zmień, które konstruktory są komentowane.
W przykładzie zdefiniowano klasę LargeObject
, która zostanie zainicjowana leniwie przez jeden z kilku wątków. Dwa kluczowe wiersze kodu w tym przykładzie to tworzenie inicjatora i rzeczywiste inicjowanie. Na początku Main
metody przykład tworzy bezpieczny wątkowo inicjator leniwy dla elementu LargeObject
:
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
Przykład tworzy i uruchamia trzy wątki, które blokują ManualResetEvent obiekt, dzięki czemu przykład może zwolnić wątki jednocześnie. Metoda ThreadProc
używana przez wszystkie trzy wątki wywołuje Value właściwość w celu pobrania LargeObject
wystąpienia:
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
Klasa Lazy<T> zapewnia blokadę, dzięki czemu tylko jeden wątek może utworzyć LargeObject
wystąpienie. W przykładzie pokazano, że wszystkie inne wątki uzyskują to samo wystąpienie.
Uwaga
Dla uproszczenia w tym przykładzie użyto globalnego wystąpienia klasy Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 4.
Initialized by thread 4; last used by thread 3.
Initialized by thread 4; last used by thread 4.
Initialized by thread 4; last used by thread 5.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"LargeObject was created on thread id {initBy}."
member val Data = Array.zeroCreate<int64> 100000000 with get
member _.InitializedBy = initBy
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}." )
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads = [| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 100
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 4.
// Initialized by thread 4 last used by thread 3.
// Initialized by thread 4 last used by thread 4.
// Initialized by thread 4 last used by thread 5.
//
// Press Enter to end the program
Imports System.Threading
Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { New Thread(AddressOf ThreadProc),
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 3.
'Initialized by thread 3; last used by thread 5.
'Initialized by thread 3; last used by thread 4.
'Initialized by thread 3; last used by thread 3.
'
'Press Enter to end the program
Uwagi
Wystąpienie utworzone za pomocą tego konstruktora może być używane współbieżnie z wielu wątków.
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia zainicjowanego za pomocą tego konstruktora to LazyThreadSafetyMode.ExecutionAndPublication. Tryb bezpieczeństwa wątku opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie.
Lazy<T> Wystąpienie utworzone za pomocą tego konstruktora nie buforuje wyjątków. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> lub wyliczenie System.Threading.LazyThreadSafetyMode .
Zobacz też
Dotyczy
Lazy<T>(Boolean)
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem używany jest konstruktor bez parametrów typu docelowego i określony tryb inicjowania.
public:
Lazy(bool isThreadSafe);
public Lazy (bool isThreadSafe);
new Lazy<'T> : bool -> Lazy<'T>
Public Sub New (isThreadSafe As Boolean)
Parametry
- isThreadSafe
- Boolean
true
aby to wystąpienie było użyteczne współbieżnie przez wiele wątków; false
aby wystąpienie było użyteczne tylko przez jeden wątek naraz.
Przykłady
W poniższym przykładzie pokazano użycie tego konstruktora do utworzenia leniwego inicjatora, który nie jest bezpieczny wątkowo, w scenariuszach, w których cały dostęp do obiektu zainicjowanego z opóźnieniem występuje w tym samym wątku. Demonstruje również użycie konstruktora Lazy<T>(LazyThreadSafetyMode) (określającego LazyThreadSafetyMode.None parametr .mode
Aby przełączyć się do innego konstruktora, po prostu zmień, który konstruktor jest skomentowany.
Uwaga
Aby zapoznać się z kodem, który pokazuje, jak używać tego konstruktora w scenariuszach wielowątkowym (określającym true
element ), isThreadSafe
zobacz przykład konstruktora Lazy<T>() .
W przykładzie zdefiniowano klasę LargeObject
, która zostanie zainicjowana z opóźnieniem. W metodzie Main
przykład tworzy Lazy<T> wystąpienie, a następnie wstrzymuje. Po naciśnięciu klawisza Enter przykład uzyskuje Value dostęp do właściwości Lazy<T> wystąpienia, co powoduje zainicjowanie. Konstruktor LargeObject
klasy wyświetla komunikat konsoli.
Uwaga
Dla uproszczenia w tym przykładzie użyto wystąpienia globalnego Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
public LargeObject()
{
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 1.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject () =
do
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000 with get
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> false
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
let large = lazyLargeObject.Value
large.Data[11] <- 89
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 1.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Public Sub New()
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 1.
'
'Press Enter to end the program
Uwagi
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia zainicjowanego za pomocą tego konstruktora to , jeśli isThreadSafe
jest LazyThreadSafetyMode.ExecutionAndPublication true
; w przeciwnym razie tryb to LazyThreadSafetyMode.None. Tryb bezpieczeństwa wątku opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie. Aby określić LazyThreadSafetyMode.PublicationOnly tryb, użyj konstruktora Lazy<T>(Func<T>, LazyThreadSafetyMode) lub Lazy<T>(LazyThreadSafetyMode) .
Wystąpienie Lazy<T> utworzone za pomocą tego konstruktora nie buforuje wyjątków. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> System.Threading.LazyThreadSafetyMode lub wyliczenie.
Zobacz też
Dotyczy
Lazy<T>(Func<T>)
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem jest używana określona funkcja inicjowania.
public:
Lazy(Func<T> ^ valueFactory);
public Lazy (Func<T> valueFactory);
new Lazy<'T> : Func<'T> -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T))
Parametry
- valueFactory
- Func<T>
Delegat wywoływany w celu wygenerowania z opóźnieniem zainicjowanej wartości, gdy jest to konieczne.
Wyjątki
valueFactory
to null
.
Przykłady
W poniższym przykładzie pokazano użycie tego konstruktora w celu zapewnienia opóźnionego inicjowania z buforowaniem wyjątków. Demonstruje również użycie konstruktora Lazy<T>(Func<T>, Boolean) (określenie isThreadSafe``true
dla parametru ) i konstruktora (określającego LazyThreadSafetyMode.ExecutionAndPublication dla mode
parametru Lazy<T>(Func<T>, LazyThreadSafetyMode) ). Aby przełączyć się do innego konstruktora, po prostu zmień, które konstruktory są komentowane.
W przykładzie zdefiniowano klasę, która zostanie zainicjowana z opóźnieniem LargeObject
przez jeden z kilku wątków. Trzy kluczowe sekcje kodu ilustrują tworzenie inicjatora, rzeczywistego inicjowania i konstruktora LargeObject
klasy, który demonstruje buforowanie wyjątków. Na początku Main
metody przykład tworzy bezpieczny wątkowo inicjator leniwy dla elementu LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
W przykładzie są tworzone i uruchamiane trzy wątki. Metoda ThreadProc
używana przez wszystkie trzy wątki wywołuje Value właściwość w celu pobrania LargeObject
wystąpienia:
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
W konstruktorze LargeObject
klasy trzecia sekcja klucza kodu zgłasza wyjątek przy LargeObject
pierwszym utworzeniu wystąpienia, ale następnie umożliwia utworzenie wystąpienia:
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Po uruchomieniu przykładu pierwszy wątek, który próbuje utworzyć wystąpienie wystąpienia LargeObject
, kończy się niepowodzeniem i zostaje przechwycony wyjątek. Można oczekiwać, że następny wątek pomyślnie utworzy wystąpienie, ale Lazy<T> obiekt buforował wyjątek. W związku z tym wszystkie trzy wątki zgłaszają wyjątek.
Uwaga
Dla uproszczenia w tym przykładzie użyto wystąpienia globalnego Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, each of which tries to use LargeObject.
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start();
}
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc _ =
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine () |> ignore
// Create and start 3 threads, each of which tries to use LargeObject.
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start()
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, each of which tries to use LargeObject.
Dim threads() As Thread = { New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start()
Next t
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Uwagi
Wystąpienie utworzone za pomocą tego konstruktora może być używane współbieżnie z wielu wątków.
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia zainicjowanego za pomocą tego konstruktora to LazyThreadSafetyMode.ExecutionAndPublication. Tryb bezpieczeństwa wątku opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie.
Wyjątki zgłaszane przez program valueFactory
są buforowane. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> System.Threading.LazyThreadSafetyMode lub wyliczenie.
Zobacz też
Dotyczy
Lazy<T>(LazyThreadSafetyMode)
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa konstruktora bez parametrów i określonego trybu bezpieczeństwa wątków T
.
public:
Lazy(System::Threading::LazyThreadSafetyMode mode);
public Lazy (System.Threading.LazyThreadSafetyMode mode);
new Lazy<'T> : System.Threading.LazyThreadSafetyMode -> Lazy<'T>
Public Sub New (mode As LazyThreadSafetyMode)
Parametry
- mode
- LazyThreadSafetyMode
Jedna z wartości wyliczenia, która określa tryb bezpieczeństwa wątku.
Wyjątki
mode
zawiera nieprawidłową wartość.
Przykłady
W poniższym przykładzie pokazano, jak używać tego konstruktora do tworzenia leniwego inicjatora, który umożliwia wyścigowi wiele wątków w celu utworzenia obiektu z opóźnieniem. Wiele wątków może zakończyć się powodzeniem podczas tworzenia wystąpień, ale wszystkie wątki używają wystąpienia, które zostało utworzone jako pierwsze.
Uwaga
Aby zapoznać się z przykładem użycia tego konstruktora w scenariuszach jednowątkowych (określających LazyThreadSafetyMode.None element mode
), zobacz Lazy<T>(Boolean) konstruktor. Aby zapoznać się z przykładem użycia tego konstruktora w celu zapewnienia blokady zamiast warunków wyścigu w scenariuszach wielowątkowym (określającym LazyThreadSafetyMode.ExecutionAndPublication parametr mode
), zobacz Lazy<T>() konstruktor.
W przykładzie zdefiniowano klasę LargeObject
, która zostanie zainicjowana z opóźnieniem przez dowolny z kilku wątków. Trzy kluczowe sekcje kodu ilustrują tworzenie inicjatora, rzeczywistego inicjowania oraz konstruktora i finalizatora LargeObject
klasy. Na początku Main
metody przykład tworzy Lazy<T> obiekt, który wykonuje opóźnioną inicjację obiektu LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
W przykładzie są tworzone i uruchamiane trzy wątki, które blokują ManualResetEvent obiekt, dzięki czemu przykład może jednocześnie zwalniać wątki. W metodzie używanej ThreadProc
przez wszystkie trzy wątki wywołanie Value właściwości tworzy LargeObject
wystąpienie:
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
Ponieważ konstruktor dla określonego Lazy<T> LazyThreadSafetyMode.PublicationOnlywystąpienia , wszystkie trzy wątki mogą tworzyć LargeObject
wystąpienia. W tym przykładzie pokazano, wyświetlając komunikaty konsoli w konstruktorze i finalizatorze LargeObject
klasy:
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Jednak obiekt zapewnia, Lazy<T> że tylko jedno wystąpienie jest używane przez wszystkie wątki. Dane wyjściowe z przykładu pokazują, że wszystkie trzy wątki używają tego samego wystąpienia, a także pokazują, że pozostałe dwa wystąpienia mogą zostać odzyskane przez odzyskiwanie pamięci.
Uwaga
Dla uproszczenia w tym przykładzie użyto wystąpienia globalnego Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim the extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine(
"\r\nNote that all three threads used the instance that was not collected.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 4
Constructor: Instance initializing on thread 3
Constructor: Instance initializing on thread 5
LargeObject was initialized by thread 4; last used by thread 4.
LargeObject was initialized by thread 4; last used by thread 5.
LargeObject was initialized by thread 4; last used by thread 3.
Threads are complete. Running GC.Collect() to reclaim the extra instances.
Finalizer: Instance was initialized on 3
Finalizer: Instance was initialized on 5
Note that all three threads used the instance that was not collected.
Press Enter to end the program
Instance finalizing; initialized on 4
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim the extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that all three threads used the instance that was not collected."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 4
// Constructor: Instance initializing on thread 3
// Constructor: Instance initializing on thread 5
// LargeObject was initialized by thread 4 last used by thread 4.
// LargeObject was initialized by thread 4 last used by thread 5.
// LargeObject was initialized by thread 4 last used by thread 3.
//
// Threads are complete. Running GC.Collect() to reclaim the extra instances.
// Finalizer: Instance was initialized on 3
// Finalizer: Instance was initialized on 5
//
// Note that all three threads used the instance that was not collected.
// Press Enter to end the program
//
// Instance finalizing initialized on 4
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim the extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & _
"Note that all three threads used the instance that was not collected.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 3
'Constructor: Instance initializing on thread 5
'Constructor: Instance initializing on thread 4
'LargeObject was initialized by thread 3; last used by thread 4.
'LargeObject was initialized by thread 3; last used by thread 3.
'LargeObject was initialized by thread 3; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim the extra instances.
'Finalizer: Instance was initialized on 5
'Finalizer: Instance was initialized on 4
'
'Note that all three threads used the instance that was not collected.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 3
'
Uwagi
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie.
Wystąpienie Lazy<T> utworzone za pomocą tego konstruktora nie buforuje wyjątków. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> System.Threading.LazyThreadSafetyMode lub wyliczenie.
Zobacz też
Dotyczy
Lazy<T>(T)
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa wstępnie określonej wartości.
public:
Lazy(T value);
public Lazy (T value);
new Lazy<'T> : 'T -> Lazy<'T>
Public Sub New (value As T)
Parametry
- value
- T
Wstępnie zainicjowana wartość do użycia.
Uwagi
Wystąpienie utworzone za pomocą tego konstruktora może być używane przez wiele wątków jednocześnie.
Dotyczy
Lazy<T>(Func<T>, Boolean)
Inicjuje nowe wystąpienie klasy Lazy<T>. W przypadku wystąpienia inicjowania z opóźnieniem jest używana określona funkcja inicjowania i tryb inicjowania.
public:
Lazy(Func<T> ^ valueFactory, bool isThreadSafe);
public Lazy (Func<T> valueFactory, bool isThreadSafe);
new Lazy<'T> : Func<'T> * bool -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T), isThreadSafe As Boolean)
Parametry
- valueFactory
- Func<T>
Delegat wywoływany w celu wygenerowania z opóźnieniem zainicjowanej wartości, gdy jest to konieczne.
- isThreadSafe
- Boolean
true
aby to wystąpienie było użyteczne współbieżnie przez wiele wątków; false
aby to wystąpienie było użyteczne tylko przez jeden wątek naraz.
Wyjątki
valueFactory
to null
.
Przykłady
W poniższym przykładzie pokazano użycie tego konstruktora w celu zapewnienia opóźnionego inicjowania z buforowaniem wyjątków w scenariuszu z jednym wątkiem. Demonstruje również użycie konstruktora (określenie LazyThreadSafetyMode.None dla mode
parametru Lazy<T> ). Aby przełączyć się do tego konstruktora, po prostu zmień, który konstruktor jest skomentowany.
Uwaga
Aby zapoznać się z kodem, który pokazuje, jak używać tego konstruktora w scenariuszach wielowątkowym (określającym true
element ), isThreadSafe
zobacz przykład konstruktora Lazy<T>(Func<T>) .
W przykładzie zdefiniowano klasę, która zostanie zainicjowana z opóźnieniem LargeObject
przez jeden z kilku wątków. Trzy kluczowe sekcje kodu ilustrują tworzenie inicjatora, rzeczywistego inicjowania i konstruktora LargeObject
klasy, który demonstruje buforowanie wyjątków. Na początku Main
metody przykład tworzy bezpieczny wątkowo inicjator leniwy dla elementu LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
W wywołaniu konstruktora isThreadSafe
parametr ma false
wartość , więc Lazy<T> parametr nie jest bezpieczny wątkiem. Ponieważ nie jest bezpieczny wątek, przykład wywołuje Value właściwość trzy razy w tym samym wątku:
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
W konstruktorze LargeObject
klasy trzecia sekcja klucza kodu zgłasza wyjątek przy LargeObject
pierwszym utworzeniu wystąpienia, ale następnie umożliwia utworzenie wystąpienia:
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Po uruchomieniu przykładu pierwsza próba utworzenia LargeObject
wystąpienia zakończy się niepowodzeniem i zostanie przechwycony wyjątek. Można oczekiwać, że następna próba powiedzie się, ale Lazy<T> obiekt buforował wyjątek. W związku z tym wszystkie trzy próby zgłaszają wyjątek.
Uwaga
Dla uproszczenia w tym przykładzie użyto wystąpienia globalnego Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject (three tries).");
Console.ReadLine();
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries).
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries)."""
stdin.ReadLine() |> ignore
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject (three tries).
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject (three tries).")
Console.ReadLine()
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject (three tries).
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Uwagi
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia zainicjowanego za pomocą tego konstruktora to , jeśli isThreadSafe
jest LazyThreadSafetyMode.ExecutionAndPublication true
; w przeciwnym razie tryb to LazyThreadSafetyMode.None. Tryb bezpieczeństwa wątku opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie.
Aby określić LazyThreadSafetyMode.PublicationOnly tryb, użyj konstruktora Lazy<T>(Func<T>, LazyThreadSafetyMode) lub Lazy<T>(LazyThreadSafetyMode) .
Wyjątki zgłaszane przez program valueFactory
są buforowane. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> System.Threading.LazyThreadSafetyMode lub wyliczenie.
Zobacz też
Dotyczy
Lazy<T>(Func<T>, LazyThreadSafetyMode)
Inicjuje Lazy<T> nowe wystąpienie klasy, które używa określonej funkcji inicjowania i trybu bezpieczeństwa wątków.
public:
Lazy(Func<T> ^ valueFactory, System::Threading::LazyThreadSafetyMode mode);
public Lazy (Func<T> valueFactory, System.Threading.LazyThreadSafetyMode mode);
new Lazy<'T> : Func<'T> * System.Threading.LazyThreadSafetyMode -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T), mode As LazyThreadSafetyMode)
Parametry
- valueFactory
- Func<T>
Delegat wywoływany w celu wygenerowania z opóźnieniem zainicjowanej wartości, gdy jest to konieczne.
- mode
- LazyThreadSafetyMode
Jedna z wartości wyliczenia, która określa tryb bezpieczeństwa wątku.
Wyjątki
mode
zawiera nieprawidłową wartość.
valueFactory
to null
.
Przykłady
W poniższym przykładzie pokazano, jak używać tego konstruktora do tworzenia leniwego inicjatora, który umożliwia wyścigowi wiele wątków w celu utworzenia obiektu z opóźnieniem. Wiele wątków może zakończyć się powodzeniem podczas tworzenia wystąpień, ale wszystkie wątki używają wystąpienia, które zostało utworzone jako pierwsze. Ponadto w przykładzie pokazano, że wyjątki nigdy nie są buforowane podczas określania LazyThreadSafetyMode.PublicationOnly, nawet jeśli inicjalizacja jest wykonywana przez funkcję zamiast przez konstruktora bez parametrów typu utworzonego z opóźnieniem.
Uwaga
Aby zapoznać się z przykładem użycia tego konstruktora w scenariuszach jednowątkowych (określających LazyThreadSafetyMode.None element mode
), zobacz Lazy<T>(Boolean) konstruktor. Aby zapoznać się z przykładem użycia tego konstruktora w celu zapewnienia blokady zamiast warunków wyścigu w scenariuszach wielowątkowym (określającym LazyThreadSafetyMode.ExecutionAndPublication parametr mode
), zobacz Lazy<T>() konstruktor.
W przykładzie zdefiniowano klasę LargeObject
, która zostanie zainicjowana z opóźnieniem przez dowolny z kilku wątków. Cztery kluczowe sekcje kodu ilustrują tworzenie inicjatora, rzeczywistą inicjację, funkcję inicjowania oraz konstruktor i finalizator LargeObject
klasy. Na początku Main
metody przykład tworzy Lazy<T> obiekt, który wykonuje opóźnioną inicjację obiektu LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
Inicjator leniwy używa funkcji do wykonania inicjowania. W takim przypadku wymagana jest funkcja, ponieważ nie ma konstruktora bez parametrów dla LargeObject
klasy.
W przykładzie są tworzone i uruchamiane trzy wątki, które blokują ManualResetEvent obiekt, dzięki czemu przykład może jednocześnie zwalniać wątki. W metodzie używanej ThreadProc
przez wszystkie trzy wątki wywołanie Value właściwości tworzy LargeObject
wystąpienie:
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
W trzeciej sekcji klucza kodu wywoływana jest funkcja inicjowania z opóźnieniem w celu utworzenia LargeObject
wystąpienia. Funkcja zgłasza wyjątek przy pierwszym wywołaniu:
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
W przypadku dowolnego innego LazyThreadSafetyMode ustawienia nieobsługiwany wyjątek w funkcji inicjowania zostanie zapisany w pamięci podręcznej. Pomija LazyThreadSafetyMode.PublicationOnly jednak buforowanie wyjątków. Dane wyjściowe z przykładu pokazują, że kolejna próba zainicjowania obiektu zakończy się pomyślnie.
Uwaga
Komunikat o wyjątku pojawia się zwykle po komunikatach wskazujących, że inne wątki pomyślnie zainicjowały obiekt. Wynika to z opóźnienia wprowadzonego przez zgłaszanie i przechwytywanie wyjątku.
Ponieważ konstruktor dla określonego Lazy<T> LazyThreadSafetyMode.PublicationOnlywystąpienia , wszystkie trzy wątki mogą tworzyć LargeObject
wystąpienia. W tym przykładzie pokazano, wyświetlając komunikaty konsoli w konstruktorze i finalizatorze LargeObject
klasy:
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Obiekt Lazy<T> zapewnia, że tylko jedno wystąpienie jest używane przez wszystkie wątki (z wyjątkiem wątku, w którym funkcja inicjowania zgłasza wyjątek). Dane wyjściowe z przykładu pokazują to.
Uwaga
Dla uproszczenia w tym przykładzie użyto wystąpienia globalnego Lazy<T>, a wszystkie metody to static
(Shared
w Visual Basic). Nie są wymogi, od których zależy możliwość inicjowania z opóźnieniem.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
// Factory function for lazy initialization.
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine("\r\nNote that only one instance of LargeObject was used.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 5
Constructor: Instance initializing on thread 4
ApplicationException: Lazy initialization function failed on thread 3.
LargeObject was initialized by thread 5; last used by thread 5.
LargeObject was initialized by thread 5; last used by thread 4.
Threads are complete. Running GC.Collect() to reclaim extra instances.
Finalizer: Instance was initialized on 4
Note that only one instance of LargeObject was used.
Press Enter to end the program
Finalizer: Instance was initialized on 5
*/
open System
open System.Threading
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000 with get
// Factory function for lazy initialization.
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that only one instance of LargeObject was used."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 5
// Constructor: Instance initializing on thread 4
// ApplicationException: Lazy initialization function failed on thread 3.
// LargeObject was initialized by thread 5 last used by thread 5.
// LargeObject was initialized by thread 5 last used by thread 4.
//
// Threads are complete. Running GC.Collect() to reclaim extra instances.
// Finalizer: Instance was initialized on 4
//
// Note that only one instance of LargeObject was used.
// Press Enter to end the program
//
// Finalizer: Instance was initialized on 5
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
' Factory function for lazy initialization.
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & "Note that only one instance of LargeObject was used.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 4
'ApplicationException: Lazy initialization function failed on thread 3.
'Constructor: Instance initializing on thread 5
'LargeObject was initialized by thread 4; last used by thread 4.
'LargeObject was initialized by thread 4; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim extra instances.
'Finalizer: Instance was initialized on 5
'
'Note that only one instance of LargeObject was used.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 4
'
Uwagi
Tryb bezpieczeństwa wątku Lazy<T> wystąpienia opisuje zachowanie, gdy wiele wątków próbuje zainicjować Lazy<T> wystąpienie.
Wyjątki zgłaszane przez program valueFactory
są buforowane, chyba że mode
jest to LazyThreadSafetyMode.PublicationOnly. Aby uzyskać więcej informacji, zobacz klasę Lazy<T> System.Threading.LazyThreadSafetyMode lub wyliczenie.