Udostępnij za pośrednictwem


ConfigurationManager.OpenExeConfiguration Metoda

Definicja

Otwiera określony plik konfiguracji klienta jako Configuration obiekt.

Przeciążenia

OpenExeConfiguration(ConfigurationUserLevel)

Otwiera plik konfiguracji dla bieżącej aplikacji jako Configuration obiekt.

OpenExeConfiguration(String)

Otwiera określony plik konfiguracji klienta jako Configuration obiekt.

OpenExeConfiguration(ConfigurationUserLevel)

Źródło:
ConfigurationManager.cs
Źródło:
ConfigurationManager.cs
Źródło:
ConfigurationManager.cs

Otwiera plik konfiguracji dla bieżącej aplikacji jako Configuration obiekt.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::Configuration::ConfigurationUserLevel userLevel);
public static System.Configuration.Configuration OpenExeConfiguration (System.Configuration.ConfigurationUserLevel userLevel);
static member OpenExeConfiguration : System.Configuration.ConfigurationUserLevel -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (userLevel As ConfigurationUserLevel) As Configuration

Parametry

userLevel
ConfigurationUserLevel

Jedna z wartości wyliczenia, która określa poziom użytkownika, dla którego otwierasz konfigurację.

Zwraca

Plik konfiguracji dla bieżącej aplikacji.

Wyjątki

Nie można załadować pliku konfiguracji.

Przykłady

W poniższym przykładzie kodu pokazano, jak używać OpenExeConfiguration metody .

// Get the roaming configuration file associated 
// with the application.
// This function uses the OpenExeConfiguration(
// ConfigurationUserLevel userLevel) method to 
// get the configuration file.
// It also creates a custom ConsoleSection and 
// sets its ConsoleElement BackgroundColor and
// ForegroundColor properties to blue and yellow
// respectively. Then it uses these properties to
// set the console colors.  
public static void GetRoamingConfiguration()
{
  // Define the custom section to add to the
  // configuration file.
  string sectionName = "consoleSection";
  ConsoleSection currentSection = null;
  
  // Get the roaming configuration 
  // that applies to the current user.
  Configuration roamingConfig =
    ConfigurationManager.OpenExeConfiguration(
     ConfigurationUserLevel.PerUserRoaming);

  // Map the roaming configuration file. This
  // enables the application to access 
  // the configuration file using the
  // System.Configuration.Configuration class
  ExeConfigurationFileMap configFileMap =
    new ExeConfigurationFileMap();
  configFileMap.ExeConfigFilename = 
    roamingConfig.FilePath;

  // Get the mapped configuration file.
  Configuration config =
    ConfigurationManager.OpenMappedExeConfiguration(
      configFileMap, ConfigurationUserLevel.None);
  
  try
    {
      currentSection =
           (ConsoleSection)config.GetSection(
             sectionName);

      // Synchronize the application configuration
      // if needed. The following two steps seem
      // to solve some out of synch issues 
      // between roaming and default
      // configuration.
      config.Save(ConfigurationSaveMode.Modified);

      // Force a reload of the changed section, 
      // if needed. This makes the new values available 
      // for reading.
      ConfigurationManager.RefreshSection(sectionName);

      if (currentSection == null)
      {
        // Create a custom configuration section.
        currentSection = new ConsoleSection();

        // Define where in the configuration file 
        // hierarchy the associated 
        // configuration section can be declared.
        // The following assignment assures that 
        // the configuration information can be 
        // defined in the user.config file in the 
        // roaming user directory. 
        currentSection.SectionInformation.AllowExeDefinition =
          ConfigurationAllowExeDefinition.MachineToLocalUser;

        // Allow the configuration section to be 
        // overridden by lower-level configuration files.
        // This means that lower-level files can contain
        // the section (use the same name) and assign 
        // different values to it as done by the
        // function GetApplicationConfiguration() in this
        // example.
        currentSection.SectionInformation.AllowOverride =
          true;

        // Store console settings for roaming users.
        currentSection.ConsoleElement.BackgroundColor =
            ConsoleColor.Blue;
        currentSection.ConsoleElement.ForegroundColor =
            ConsoleColor.Yellow;

        // Add configuration information to 
        // the configuration file.
        config.Sections.Add(sectionName, currentSection);
        config.Save(ConfigurationSaveMode.Modified);
        // Force a reload of the changed section. This 
        // makes the new values available for reading.
        ConfigurationManager.RefreshSection(
          sectionName);
      }
  }
  catch (ConfigurationErrorsException e)
  {
      Console.WriteLine("[Exception error: {0}]",
          e.ToString());
  }

  // Set console properties using values
  // stored in the configuration file.
  Console.BackgroundColor =
    currentSection.ConsoleElement.BackgroundColor;
  Console.ForegroundColor =
    currentSection.ConsoleElement.ForegroundColor;
  // Apply the changes.
  Console.Clear();

  // Display feedback.
  Console.WriteLine();
  Console.WriteLine(
    "Using OpenExeConfiguration(ConfigurationUserLevel).");
  Console.WriteLine(
      "Configuration file is: {0}", config.FilePath);
}
    ' Get the roaming configuration file associated 
    ' with the application.
    ' This function uses the OpenExeConfiguration(
    ' ConfigurationUserLevel userLevel) method to 
    ' get the configuration file.
    ' It also creates a custom ConsoleSection and 
' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to blue and yellow
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetRoamingConfiguration()
        ' Define the custom section to add to the
        ' configuration file.
        Dim sectionName As String = "consoleSection"
        Dim currentSection As ConsoleSection = Nothing

        ' Get the roaming configuration 
        ' that applies to the current user.
        Dim roamingConfig As Configuration = _
        ConfigurationManager.OpenExeConfiguration( _
            ConfigurationUserLevel.PerUserRoaming)

        ' Map the roaming configuration file. This
        ' enables the application to access 
        ' the configuration file using the
        ' System.Configuration.Configuration class
        Dim configFileMap As New ExeConfigurationFileMap()
        configFileMap.ExeConfigFilename = _
            roamingConfig.FilePath

        ' Get the mapped configuration file.
        Dim config As Configuration = _
            ConfigurationManager.OpenMappedExeConfiguration( _
                configFileMap, ConfigurationUserLevel.None)

        Try
            currentSection = DirectCast( _
                config.GetSection(sectionName),  _
                ConsoleSection)

            ' Synchronize the application configuration
            ' if needed. The following two steps seem
            ' to solve some out of synch issues 
            ' between roaming and default
            ' configuration.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload of the changed section, 
            ' if needed. This makes the new values available 
            ' for reading.
            ConfigurationManager.RefreshSection(sectionName)

            If currentSection Is Nothing Then
                ' Create a custom configuration section.
                currentSection = New ConsoleSection()

                ' Define where in the configuration file 
                ' hierarchy the associated 
                ' configuration section can be declared.
                ' The following assignment assures that 
                ' the configuration information can be 
                ' defined in the user.config file in the 
                ' roaming user directory. 
                currentSection.SectionInformation. _
                AllowExeDefinition = _
                    ConfigurationAllowExeDefinition. _
                    MachineToLocalUser

                ' Allow the configuration section to be 
                ' overridden by lower-level configuration 
                ' files.
                ' This means that lower-level files can 
                ' contain()the section (use the same name) 
                ' and assign different values to it as 
                ' done by the function 
                ' GetApplicationConfiguration() in this
                ' example.
                currentSection.SectionInformation. _
                    AllowOverride = True

                ' Store console settings for roaming users.
                currentSection.ConsoleElement. _
                BackgroundColor = ConsoleColor.Blue
                currentSection.ConsoleElement. _
                ForegroundColor = ConsoleColor.Yellow

                ' Add configuration information to 
                ' the configuration file.
                config.Sections.Add(sectionName, _
                    currentSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section. This 
                ' makes the new values available for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Exception error: {0}]", _
                              e.ToString())
        End Try

        ' Set console properties using values
        ' stored in the configuration file.
        Console.BackgroundColor = _
            currentSection.ConsoleElement.BackgroundColor
        Console.ForegroundColor = _
            currentSection.ConsoleElement.ForegroundColor
        ' Apply the changes.
        Console.Clear()

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(userLevel).")
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Uwagi

Aplikacje klienckie używają konfiguracji globalnej, która ma zastosowanie do wszystkich użytkowników, oddzielnych konfiguracji, które mają zastosowanie do poszczególnych użytkowników, oraz konfiguracji, które mają zastosowanie do użytkowników mobilnych. Parametr userLevel określa lokalizację otwieranego pliku konfiguracji, wskazując, czy nie ma poziomu użytkownika (plik konfiguracji znajduje się w tym samym katalogu co aplikacja) lub ma poziom na użytkownika (plik konfiguracji znajduje się w ścieżce ustawień aplikacji określonej przez poziom użytkownika).

Określ konfigurację, która ma być pobierana, przekazując jedną z następujących wartości dla userLevelelementu :

  • Aby uzyskać Configuration obiekt, który ma zastosowanie do wszystkich użytkowników, ustaw wartość userLevelNone.

  • Aby uzyskać obiekt lokalny Configuration , który ma zastosowanie do bieżącego użytkownika, ustaw wartość userLevelPerUserRoamingAndLocal.

  • Aby uzyskać obiekt roamingu Configuration , który ma zastosowanie do bieżącego użytkownika, ustaw wartość userLevelPerUserRoaming.

    Uwaga

    Aby uzyskać Configuration obiekt dla zasobu, kod musi mieć uprawnienia do odczytu dla wszystkich plików konfiguracji, z których dziedziczy ustawienia. Aby zaktualizować plik konfiguracji, kod musi dodatkowo mieć uprawnienia do zapisu zarówno dla pliku konfiguracji, jak i katalogu, w którym istnieje.

Zobacz też

Dotyczy

OpenExeConfiguration(String)

Źródło:
ConfigurationManager.cs
Źródło:
ConfigurationManager.cs
Źródło:
ConfigurationManager.cs

Otwiera określony plik konfiguracji klienta jako Configuration obiekt.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::String ^ exePath);
public static System.Configuration.Configuration OpenExeConfiguration (string exePath);
static member OpenExeConfiguration : string -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (exePath As String) As Configuration

Parametry

exePath
String

Ścieżka pliku wykonywalnego (exe).

Zwraca

Określony plik konfiguracji.

Wyjątki

Nie można załadować pliku konfiguracji.

Przykłady

W poniższym przykładzie kodu pokazano, jak używać OpenExeConfiguration metody .

    // Get the application configuration file.
    // This function uses the 
    // OpenExeConfiguration(string)method 
    // to get the application configuration file. 
    // It also creates a custom ConsoleSection and 
    // sets its ConsoleElement BackgroundColor and
    // ForegroundColor properties to black and white
    // respectively. Then it uses these properties to
    // set the console colors.  
    public static void GetAppConfiguration()
    {

      // Get the application path needed to obtain
      // the application configuration file.
#if DEBUG
      string applicationName =
          Environment.GetCommandLineArgs()[0];
#else
           string applicationName =
          Environment.GetCommandLineArgs()[0]+ ".exe";
#endif

      string exePath = System.IO.Path.Combine(
          Environment.CurrentDirectory, applicationName);

      // Get the configuration file. The file name has
      // this format appname.exe.config.
      System.Configuration.Configuration config =
        ConfigurationManager.OpenExeConfiguration(exePath);

      try
      {
        
        // Create a custom configuration section
        // having the same name that is used in the 
        // roaming configuration file.
        // This is because the configuration section 
        // can be overridden by lower-level 
        // configuration files. 
        // See the GetRoamingConfiguration() function in 
        // this example.
        string sectionName = "consoleSection";
        ConsoleSection customSection = new ConsoleSection();

        if (config.Sections[sectionName] == null)
        {
          // Create a custom section if it does 
          // not exist yet.
          
          // Store console settings.
          customSection.ConsoleElement.BackgroundColor =
              ConsoleColor.Black;
          customSection.ConsoleElement.ForegroundColor =
              ConsoleColor.White;

          // Add configuration information to the
          // configuration file.
          config.Sections.Add(sectionName, customSection);
          config.Save(ConfigurationSaveMode.Modified);
          // Force a reload of the changed section.
          // This makes the new values available for reading.
          ConfigurationManager.RefreshSection(sectionName);
        }
        // Set console properties using values
        // stored in the configuration file.
        customSection =
            (ConsoleSection)config.GetSection(sectionName);
        Console.BackgroundColor =
            customSection.ConsoleElement.BackgroundColor;
        Console.ForegroundColor =
            customSection.ConsoleElement.ForegroundColor;
        // Apply the changes.
        Console.Clear();
      }
      catch (ConfigurationErrorsException e)
      {
        Console.WriteLine("[Error exception: {0}]",
            e.ToString());
      }
     
      // Display feedback.
      Console.WriteLine();
      Console.WriteLine("Using OpenExeConfiguration(string).");
      // Display the current configuration file path.
      Console.WriteLine("Configuration file is: {0}", 
        config.FilePath);
    }
    ' Get the application configuration file.
    ' This function uses the 
    ' OpenExeConfiguration(string)method 
    ' to get the application configuration file. 
    ' It also creates a custom ConsoleSection and 
    ' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to black and white
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetAppConfiguration()
        ' Get the application path needed to obtain
        ' the application configuration file.
#If DEBUG Then
        Dim applicationName As String = _
            Environment.GetCommandLineArgs()(0)
#Else
            Dim applicationName As String = _
                Environment.GetCommandLineArgs()(0) + ".exe"
#End If

        Dim exePath As String = _
        System.IO.Path.Combine( _
            Environment.CurrentDirectory, applicationName)

        ' Get the configuration file. The file name has
        ' this format appname.exe.config.
        Dim config As System.Configuration.Configuration = _
            ConfigurationManager.OpenExeConfiguration(exePath)

        Try

            ' Create a custom configuration section
            ' having the same name that is used in the 
            ' roaming configuration file.
            ' This is because the configuration section 
            ' can be overridden by lower-level 
            ' configuration files. 
            ' See the GetRoamingConfiguration() function in 
            ' this example.
            Dim sectionName As String = "consoleSection"
            Dim customSection As New ConsoleSection()

            If config.Sections(sectionName) Is Nothing Then
                ' Create a custom section if it does 
                ' not exist yet.

                ' Store console settings.
                customSection.ConsoleElement. _
                    BackgroundColor = ConsoleColor.Black
                customSection.ConsoleElement. _
                    ForegroundColor = ConsoleColor.White

                ' Add configuration information to the
                ' configuration file.
                config.Sections.Add(sectionName, _
                                    customSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section.
                ' This makes the new values available 
                ' for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
            ' Set console properties using values
            ' stored in the configuration file.
            customSection = DirectCast( _
                config.GetSection(sectionName),  _
                    ConsoleSection)
            Console.BackgroundColor = _
                customSection.ConsoleElement.BackgroundColor
            Console.ForegroundColor = _
                customSection.ConsoleElement.ForegroundColor
            ' Apply the changes.
            Console.Clear()
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Error exception: {0}]", _
                              e.ToString())
        End Try

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(string).")
        ' Display the current configuration file path.
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Uwagi

Wywołanie tego przeciążenia metody jest równoważne wywołaniu OpenMappedExeConfiguration(ExeConfigurationFileMap, ConfigurationUserLevel, Boolean) przeciążenia z parametrem ustawionym preLoad na false.

Zobacz też

Dotyczy