Console.WriteLine Metoda

Definicja

Zapisuje określone dane, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

Przeciążenia

WriteLine(String, Object, Object)

Zapisuje reprezentację tekstową określonych obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

WriteLine(String)

Zapisuje określoną wartość ciągu, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Char[], Int32, Int32)

Zapisuje określoną podtablicę znaków Unicode, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine(String, Object[])

Zapisuje reprezentację tekstową określonej tablicy obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

WriteLine(String, Object)

Zapisuje reprezentację tekstową określonego obiektu, po którym następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

WriteLine(UInt64)

Zapisuje reprezentację tekstową określonej 64-bitowej niepodpisanej wartości całkowitej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine(UInt32)

Zapisuje reprezentację tekstową określonej 32-bitowej niepodpisanej wartości całkowitej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine(Single)

Zapisuje reprezentację tekstową określonej wartości zmiennoprzecinkowej o pojedynczej precyzji, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Decimal)

Zapisuje reprezentację tekstową określonej Decimal wartości, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine(Int64)

Zapisuje tekstową reprezentację określonej 64-bitowej liczby całkowitej ze znakiem, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Int32)

Zapisuje reprezentację tekstową określonej 32-bitowej liczby całkowitej ze znakiem, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Double)

Zapisuje reprezentację tekstową określonej wartości zmiennoprzecinkowej o podwójnej precyzji, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Char[])

Zapisuje określoną tablicę znaków Unicode, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(Char)

Zapisuje określony znak Unicode, po którym następuje bieżący terminator wiersza, wartość standardowego strumienia wyjściowego.

WriteLine(Boolean)

Zapisuje reprezentację tekstową określonej wartości logicznej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine()

Zapisuje bieżący terminator wiersza do standardowego strumienia wyjściowego.

WriteLine(String, Object, Object, Object)

Zapisuje reprezentację tekstową określonych obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

WriteLine(Object)

Zapisuje reprezentację tekstową określonego obiektu, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego.

WriteLine(String, Object, Object, Object, Object)

Zapisuje tekstową reprezentację określonych obiektów i listy parametrów o zmiennej długości, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

Uwagi

Domyślny terminator wiersza to ciąg, którego wartość jest zwracanym karetkiem, po którym następuje źródło wiersza ("\r\n" w języku C# lub vbCrLf w Visual Basic). Terminator wiersza można zmienić, ustawiając TextWriter.NewLine właściwość właściwości Out na inny ciąg.

WriteLine(String, Object, Object)

Zapisuje reprezentację tekstową określonych obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

public:
 static void WriteLine(System::String ^ format, System::Object ^ arg0, System::Object ^ arg1);
public static void WriteLine (string format, object? arg0, object? arg1);
public static void WriteLine (string format, object arg0, object arg1);
static member WriteLine : string * obj * obj -> unit
Public Shared Sub WriteLine (format As String, arg0 As Object, arg1 As Object)

Parametry

format
String

Ciąg formatu złożonego.

arg0
Object

Pierwszy obiekt do zapisania przy użyciu polecenia format.

arg1
Object

Drugi obiekt do zapisania przy użyciu polecenia format.

Wyjątki

Wystąpił błąd we/wy.

format to null.

Specyfikacja formatu w pliku format jest nieprawidłowa.

Przykłady

Poniższy przykład ilustruje standardowe specyfikatory formatowania liczb, dat i wyliczeń.

// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using namespace System;

public enum class Color {Yellow = 1, Blue, Green};

int main() 
{
    DateTime thisDate = DateTime::Now;
    Console::Clear();

    // Format a negative integer or floating-point number in various ways.
    Console::WriteLine("Standard Numeric Format Specifiers");
    Console::WriteLine(
        "(C) Currency: . . . . . . . . {0:C}\n" +
        "(D) Decimal:. . . . . . . . . {0:D}\n" +
        "(E) Scientific: . . . . . . . {1:E}\n" +
        "(F) Fixed point:. . . . . . . {1:F}\n" +
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(N) Number: . . . . . . . . . {0:N}\n" +
        "(P) Percent:. . . . . . . . . {1:P}\n" +
        "(R) Round-trip: . . . . . . . {1:R}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n",
        -123, -123.45f); 

    // Format the current date in various ways.
    Console::WriteLine("Standard DateTime Format Specifiers");
    Console::WriteLine(
        "(d) Short date: . . . . . . . {0:d}\n" +
        "(D) Long date:. . . . . . . . {0:D}\n" +
        "(t) Short time: . . . . . . . {0:t}\n" +
        "(T) Long time:. . . . . . . . {0:T}\n" +
        "(f) Full date/short time: . . {0:f}\n" +
        "(F) Full date/long time:. . . {0:F}\n" +
        "(g) General date/short time:. {0:g}\n" +
        "(G) General date/long time: . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(M) Month:. . . . . . . . . . {0:M}\n" +
        "(R) RFC1123:. . . . . . . . . {0:R}\n" +
        "(s) Sortable: . . . . . . . . {0:s}\n" +
        "(u) Universal sortable: . . . {0:u} (invariant)\n" +
        "(U) Universal full date/time: {0:U}\n" +
        "(Y) Year: . . . . . . . . . . {0:Y}\n", 
        thisDate);

    // Format a Color enumeration value in various ways.
    Console::WriteLine("Standard Enumeration Format Specifiers");
    Console::WriteLine(
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
        "(D) Decimal number: . . . . . {0:D}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n", 
        Color::Green);       

};


/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
(default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
(default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
(default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using System;
class Sample
{
    enum Color {Yellow = 1, Blue, Green};
    static DateTime thisDate = DateTime.Now;

    public static void Main()
    {
        Console.Clear();

        // Format a negative integer or floating-point number in various ways.
        Console.WriteLine("Standard Numeric Format Specifiers");
        Console.WriteLine(
            "(C) Currency: . . . . . . . . {0:C}\n" +
            "(D) Decimal:. . . . . . . . . {0:D}\n" +
            "(E) Scientific: . . . . . . . {1:E}\n" +
            "(F) Fixed point:. . . . . . . {1:F}\n" +
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(N) Number: . . . . . . . . . {0:N}\n" +
            "(P) Percent:. . . . . . . . . {1:P}\n" +
            "(R) Round-trip: . . . . . . . {1:R}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            -123, -123.45f);

        // Format the current date in various ways.
        Console.WriteLine("Standard DateTime Format Specifiers");
        Console.WriteLine(
            "(d) Short date: . . . . . . . {0:d}\n" +
            "(D) Long date:. . . . . . . . {0:D}\n" +
            "(t) Short time: . . . . . . . {0:t}\n" +
            "(T) Long time:. . . . . . . . {0:T}\n" +
            "(f) Full date/short time: . . {0:f}\n" +
            "(F) Full date/long time:. . . {0:F}\n" +
            "(g) General date/short time:. {0:g}\n" +
            "(G) General date/long time: . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(M) Month:. . . . . . . . . . {0:M}\n" +
            "(R) RFC1123:. . . . . . . . . {0:R}\n" +
            "(s) Sortable: . . . . . . . . {0:s}\n" +
            "(u) Universal sortable: . . . {0:u} (invariant)\n" +
            "(U) Universal full date/time: {0:U}\n" +
            "(Y) Year: . . . . . . . . . . {0:Y}\n",
            thisDate);

        // Format a Color enumeration value in various ways.
        Console.WriteLine("Standard Enumeration Format Specifiers");
        Console.WriteLine(
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
            "(D) Decimal number: . . . . . {0:D}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            Color.Green);
    }
}
/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
    (default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
    (default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

open System

type Color = 
    | Yellow = 1
    | Blue = 2
    | Green = 3

let thisDate = DateTime.Now

Console.Clear()

// Format a negative integer or floating-point number in various ways.
Console.WriteLine "Standard Numeric Format Specifiers"
Console.WriteLine(
    "(C) Currency: . . . . . . . . {0:C}\n" +
    "(D) Decimal:. . . . . . . . . {0:D}\n" +
    "(E) Scientific: . . . . . . . {1:E}\n" +
    "(F) Fixed point:. . . . . . . {1:F}\n" +
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(N) Number: . . . . . . . . . {0:N}\n" +
    "(P) Percent:. . . . . . . . . {1:P}\n" +
    "(R) Round-trip: . . . . . . . {1:R}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    -123, -123.45f)

// Format the current date in various ways.
Console.WriteLine "Standard DateTime Format Specifiers"
Console.WriteLine(
    "(d) Short date: . . . . . . . {0:d}\n" +
    "(D) Long date:. . . . . . . . {0:D}\n" +
    "(t) Short time: . . . . . . . {0:t}\n" +
    "(T) Long time:. . . . . . . . {0:T}\n" +
    "(f) Full date/short time: . . {0:f}\n" +
    "(F) Full date/long time:. . . {0:F}\n" +
    "(g) General date/short time:. {0:g}\n" +
    "(G) General date/long time: . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(M) Month:. . . . . . . . . . {0:M}\n" +
    "(R) RFC1123:. . . . . . . . . {0:R}\n" +
    "(s) Sortable: . . . . . . . . {0:s}\n" +
    "(u) Universal sortable: . . . {0:u} (invariant)\n" +
    "(U) Universal full date/time: {0:U}\n" +
    "(Y) Year: . . . . . . . . . . {0:Y}\n",
    thisDate)

// Format a Color enumeration value in various ways.
Console.WriteLine "Standard Enumeration Format Specifiers"
Console.WriteLine(
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
    "(D) Decimal number: . . . . . {0:D}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    Color.Green)


// This code example produces the following results:
//
// Standard Numeric Format Specifiers
// (C) Currency: . . . . . . . . ($123.00)
// (D) Decimal:. . . . . . . . . -123
// (E) Scientific: . . . . . . . -1.234500E+002
// (F) Fixed point:. . . . . . . -123.45
// (G) General:. . . . . . . . . -123
//     (default):. . . . . . . . -123 (default = 'G')
// (N) Number: . . . . . . . . . -123.00
// (P) Percent:. . . . . . . . . -12,345.00 %
// (R) Round-trip: . . . . . . . -123.45
// (X) Hexadecimal:. . . . . . . FFFFFF85
//
// Standard DateTime Format Specifiers
// (d) Short date: . . . . . . . 6/26/2004
// (D) Long date:. . . . . . . . Saturday, June 26, 2004
// (t) Short time: . . . . . . . 8:11 PM
// (T) Long time:. . . . . . . . 8:11:04 PM
// (f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
// (F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
// (g) General date/short time:. 6/26/2004 8:11 PM
// (G) General date/long time: . 6/26/2004 8:11:04 PM
//     (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
// (M) Month:. . . . . . . . . . June 26
// (R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
// (s) Sortable: . . . . . . . . 2004-06-26T20:11:04
// (u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
// (U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
// (Y) Year: . . . . . . . . . . June, 2004
//
// Standard Enumeration Format Specifiers
// (G) General:. . . . . . . . . Green
//     (default):. . . . . . . . Green (default = 'G')
// (F) Flags:. . . . . . . . . . Green (flags or integer)
// (D) Decimal number: . . . . . 3
// (X) Hexadecimal:. . . . . . . 00000003
' This code example demonstrates the Console.WriteLine() method.
' Formatting for this example uses the "en-US" culture.

Class Sample
   Public Enum Color
      Yellow = 1
      Blue = 2
      Green = 3
   End Enum 'Color
   Private Shared thisDate As DateTime = DateTime.Now
   
   Public Shared Sub Main()
      Console.Clear()

      ' Format a negative integer or floating-point number in various ways.
      Console.WriteLine("Standard Numeric Format Specifiers")
      Console.WriteLine("(C) Currency: . . . . . . . . {0:C}" & vbCrLf & _
                        "(D) Decimal:. . . . . . . . . {0:D}" & vbCrLf & _
                        "(E) Scientific: . . . . . . . {1:E}" & vbCrLf & _
                        "(F) Fixed point:. . . . . . . {1:F}" & vbCrLf & _
                        "(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(N) Number: . . . . . . . . . {0:N}" & vbCrLf & _
                        "(P) Percent:. . . . . . . . . {1:P}" & vbCrLf & _
                        "(R) Round-trip: . . . . . . . {1:R}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        - 123, - 123.45F)

      ' Format the current date in various ways.
      Console.WriteLine("Standard DateTime Format Specifiers")
      Console.WriteLine("(d) Short date: . . . . . . . {0:d}" & vbCrLf & _
                        "(D) Long date:. . . . . . . . {0:D}" & vbCrLf & _
                        "(t) Short time: . . . . . . . {0:t}" & vbCrLf & _
                        "(T) Long time:. . . . . . . . {0:T}" & vbCrLf & _
                        "(f) Full date/short time: . . {0:f}" & vbCrLf & _
                        "(F) Full date/long time:. . . {0:F}" & vbCrLf & _
                        "(g) General date/short time:. {0:g}" & vbCrLf & _
                        "(G) General date/long time: . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(M) Month:. . . . . . . . . . {0:M}" & vbCrLf & _
                        "(R) RFC1123:. . . . . . . . . {0:R}" & vbCrLf & _
                        "(s) Sortable: . . . . . . . . {0:s}" & vbCrLf & _
                        "(u) Universal sortable: . . . {0:u} (invariant)" & vbCrLf & _
                        "(U) Universal full date/time: {0:U}" & vbCrLf & _
                        "(Y) Year: . . . . . . . . . . {0:Y}" & vbCrLf, _
                        thisDate)

      ' Format a Color enumeration value in various ways.
      Console.WriteLine("Standard Enumeration Format Specifiers")
      Console.WriteLine("(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)" & vbCrLf & _
                        "(D) Decimal number: . . . . . {0:D}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        Color.Green)
   End Sub
End Class
'
'This code example produces the following results:
'
'Standard Numeric Format Specifiers
'(C) Currency: . . . . . . . . ($123.00)
'(D) Decimal:. . . . . . . . . -123
'(E) Scientific: . . . . . . . -1.234500E+002
'(F) Fixed point:. . . . . . . -123.45
'(G) General:. . . . . . . . . -123
'    (default):. . . . . . . . -123 (default = 'G')
'(N) Number: . . . . . . . . . -123.00
'(P) Percent:. . . . . . . . . -12,345.00 %
'(R) Round-trip: . . . . . . . -123.45
'(X) Hexadecimal:. . . . . . . FFFFFF85
'
'Standard DateTime Format Specifiers
'(d) Short date: . . . . . . . 6/26/2004
'(D) Long date:. . . . . . . . Saturday, June 26, 2004
'(t) Short time: . . . . . . . 8:11 PM
'(T) Long time:. . . . . . . . 8:11:04 PM
'(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
'(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
'(g) General date/short time:. 6/26/2004 8:11 PM
'(G) General date/long time: . 6/26/2004 8:11:04 PM
'    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
'(M) Month:. . . . . . . . . . June 26
'(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
'(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
'(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
'(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
'(Y) Year: . . . . . . . . . . June, 2004
'
'Standard Enumeration Format Specifiers
'(G) General:. . . . . . . . . Green
'    (default):. . . . . . . . Green (default = 'G')
'(F) Flags:. . . . . . . . . . Green (flags or integer)
'(D) Decimal number: . . . . . 3
'(X) Hexadecimal:. . . . . . . 00000003
'

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Ta metoda używa funkcji formatowania złożonego platformy .NET, aby przekonwertować wartość obiektu na jego reprezentację tekstową i osadzić tę reprezentację w ciągu. Wynikowy ciąg jest zapisywany do strumienia wyjściowego.

Parametr format składa się z zera lub większej liczby przebiegów tekstu zmieszanego z zero lub większą większa liczba indeksowanych symboli zastępczych, nazywanych elementami formatu, które odpowiadają obiektowi na liście parametrów tej metody. Proces formatowania zastępuje każdy element formatu tekstową reprezentacja wartości odpowiedniego obiektu.

Składnia elementu formatu to {index[,alignment][:formatString]}, który określa obowiązkowy indeks, opcjonalną długość i wyrównanie sformatowanego tekstu oraz opcjonalny ciąg znaków specyfikatora formatu, które określają sposób formatowania wartości odpowiedniego obiektu.

Platforma .NET zapewnia rozbudowaną obsługę formatowania, która została szczegółowo opisana w poniższych tematach formatowania.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(String)

Zapisuje określoną wartość ciągu, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(System::String ^ value);
public static void WriteLine (string? value);
public static void WriteLine (string value);
static member WriteLine : string -> unit
Public Shared Sub WriteLine (value As String)

Parametry

value
String

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Przykład zmienia terminator wiersza z wartości domyślnej "\r\n" lub vbCrLf "\r\n\r\n" lub + vbCrLf``vbCrLf . Następnie wywołuje WriteLine() metody i WriteLine(String) w celu wyświetlenia danych wyjściowych do konsoli.

using namespace System;

void main()
{
   array<String^>^ lines = gcnew array<String^> { "This is the first line.", 
                                                  "This is the second line." };
   // Output the lines using the default newline sequence.
   Console::WriteLine("With the default new line characters:");
   Console::WriteLine();
   for each (String^ line in lines)
      Console::WriteLine(line);

   Console::WriteLine();

   // Redefine the newline characters to double space.
   Console::Out->NewLine = "\r\n\r\n";
   // Output the lines using the new newline sequence.
   Console::WriteLine("With redefined new line characters:");
   Console::WriteLine();
   for each (String^ line in lines)
      Console::WriteLine(line);
}
// The example displays the following output:
//       With the default new line characters:
//       
//       This is the first line.
//       This is the second line.
//       
//       With redefined new line characters:
//       
//       
//       
//       This is the first line.
//       
//       This is the second line.
string[] lines = { "This is the first line.",
                   "This is the second line." };
// Output the lines using the default newline sequence.
Console.WriteLine("With the default new line characters:");
Console.WriteLine();
foreach (string line in lines)
   Console.WriteLine(line);

Console.WriteLine();

// Redefine the newline characters to double space.
Console.Out.NewLine = "\r\n\r\n";
// Output the lines using the new newline sequence.
Console.WriteLine("With redefined new line characters:");
Console.WriteLine();
foreach (string line in lines)
   Console.WriteLine(line);

// The example displays the following output:
//       With the default new line characters:
//
//       This is the first line.
//       This is the second line.
//
//       With redefined new line characters:
//
//
//
//       This is the first line.
//
//       This is the second line.
let lines = 
    [ "This is the first line."
      "This is the second line." ]
      
// Output the lines using the default newline sequence.
Console.WriteLine "With the default new line characters:"
Console.WriteLine()
for line in lines do
    Console.WriteLine line

Console.WriteLine()

// Redefine the newline characters to double space.
Console.Out.NewLine <- "\r\n\r\n"
// Output the lines using the new newline sequence.
Console.WriteLine "With redefined new line characters:"
Console.WriteLine()
for line in lines do
    Console.WriteLine line

// The example displays the following output:
//       With the default new line characters:
//
//       This is the first line.
//       This is the second line.
//
//       With redefined new line characters:
//
//
//
//       This is the first line.
//
//       This is the second line.
Module Example
   Public Sub Main()
      Dim lines() As String = { "This is the first line.", _
                                "This is the second line." }
      ' Output the lines using the default newline sequence.
      Console.WriteLine("With the default new line characters:")
      Console.WriteLine()
      For Each line As String In lines
         Console.WriteLine(line)
      Next
      Console.WriteLine()
      
      ' Redefine the newline characters to double space.
      Console.Out.NewLine = vbCrLf + vbCrLf
      ' Output the lines using the new newline sequence.
      Console.WriteLine("With redefined new line characters:")
      Console.WriteLine()
      For Each line As String In lines
         Console.WriteLine(line)
      Next
   End Sub
End Module
' The example displays the following output:
'       With the default new line characters:
'       
'       This is the first line.
'       This is the second line.
'       
'       With redefined new line characters:
'       
'       
'       
'       This is the first line.
'       
'       This is the second line.

Uwagi

Jeśli wartość to null, do standardowego strumienia wyjściowego jest zapisywany tylko terminator wiersza.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję Uwagi metody WriteLine() .

Zobacz też

Dotyczy

WriteLine(Char[], Int32, Int32)

Zapisuje określoną podtablicę znaków Unicode, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(cli::array <char> ^ buffer, int index, int count);
public static void WriteLine (char[] buffer, int index, int count);
static member WriteLine : char[] * int * int -> unit
Public Shared Sub WriteLine (buffer As Char(), index As Integer, count As Integer)

Parametry

buffer
Char[]

Tablica znaków Unicode.

index
Int32

Pozycja początkowa w bufferelemecie .

count
Int32

Liczba znaków, jaka ma zostać zapisana.

Wyjątki

buffer to null.

index wartość lub count jest mniejsza niż zero.

index plus count określ pozycję, która nie znajduje się w obiekcie buffer.

Wystąpił błąd we/wy.

Uwagi

Ta metoda zapisuje znaki rozpoczynające count się od pozycji buffer index standardowego strumienia wyjściowego.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(String, Object[])

Zapisuje reprezentację tekstową określonej tablicy obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

public:
 static void WriteLine(System::String ^ format, ... cli::array <System::Object ^> ^ arg);
public static void WriteLine (string format, params object?[]? arg);
public static void WriteLine (string format, params object[] arg);
static member WriteLine : string * obj[] -> unit
Public Shared Sub WriteLine (format As String, ParamArray arg As Object())

Parametry

format
String

Ciąg formatu złożonego.

arg
Object[]

Tablica obiektów do zapisu przy użyciu polecenia format.

Wyjątki

Wystąpił błąd we/wy.

format lub arg ma wartość null.

Specyfikacja formatu w pliku format jest nieprawidłowa.

Przykłady

Poniższy przykład ilustruje standardowe specyfikatory formatowania liczb, dat i wyliczeń.

// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using namespace System;

public enum class Color {Yellow = 1, Blue, Green};

int main() 
{
    DateTime thisDate = DateTime::Now;
    Console::Clear();

    // Format a negative integer or floating-point number in various ways.
    Console::WriteLine("Standard Numeric Format Specifiers");
    Console::WriteLine(
        "(C) Currency: . . . . . . . . {0:C}\n" +
        "(D) Decimal:. . . . . . . . . {0:D}\n" +
        "(E) Scientific: . . . . . . . {1:E}\n" +
        "(F) Fixed point:. . . . . . . {1:F}\n" +
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(N) Number: . . . . . . . . . {0:N}\n" +
        "(P) Percent:. . . . . . . . . {1:P}\n" +
        "(R) Round-trip: . . . . . . . {1:R}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n",
        -123, -123.45f); 

    // Format the current date in various ways.
    Console::WriteLine("Standard DateTime Format Specifiers");
    Console::WriteLine(
        "(d) Short date: . . . . . . . {0:d}\n" +
        "(D) Long date:. . . . . . . . {0:D}\n" +
        "(t) Short time: . . . . . . . {0:t}\n" +
        "(T) Long time:. . . . . . . . {0:T}\n" +
        "(f) Full date/short time: . . {0:f}\n" +
        "(F) Full date/long time:. . . {0:F}\n" +
        "(g) General date/short time:. {0:g}\n" +
        "(G) General date/long time: . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(M) Month:. . . . . . . . . . {0:M}\n" +
        "(R) RFC1123:. . . . . . . . . {0:R}\n" +
        "(s) Sortable: . . . . . . . . {0:s}\n" +
        "(u) Universal sortable: . . . {0:u} (invariant)\n" +
        "(U) Universal full date/time: {0:U}\n" +
        "(Y) Year: . . . . . . . . . . {0:Y}\n", 
        thisDate);

    // Format a Color enumeration value in various ways.
    Console::WriteLine("Standard Enumeration Format Specifiers");
    Console::WriteLine(
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
        "(D) Decimal number: . . . . . {0:D}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n", 
        Color::Green);       

};


/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
(default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
(default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
(default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using System;
class Sample
{
    enum Color {Yellow = 1, Blue, Green};
    static DateTime thisDate = DateTime.Now;

    public static void Main()
    {
        Console.Clear();

        // Format a negative integer or floating-point number in various ways.
        Console.WriteLine("Standard Numeric Format Specifiers");
        Console.WriteLine(
            "(C) Currency: . . . . . . . . {0:C}\n" +
            "(D) Decimal:. . . . . . . . . {0:D}\n" +
            "(E) Scientific: . . . . . . . {1:E}\n" +
            "(F) Fixed point:. . . . . . . {1:F}\n" +
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(N) Number: . . . . . . . . . {0:N}\n" +
            "(P) Percent:. . . . . . . . . {1:P}\n" +
            "(R) Round-trip: . . . . . . . {1:R}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            -123, -123.45f);

        // Format the current date in various ways.
        Console.WriteLine("Standard DateTime Format Specifiers");
        Console.WriteLine(
            "(d) Short date: . . . . . . . {0:d}\n" +
            "(D) Long date:. . . . . . . . {0:D}\n" +
            "(t) Short time: . . . . . . . {0:t}\n" +
            "(T) Long time:. . . . . . . . {0:T}\n" +
            "(f) Full date/short time: . . {0:f}\n" +
            "(F) Full date/long time:. . . {0:F}\n" +
            "(g) General date/short time:. {0:g}\n" +
            "(G) General date/long time: . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(M) Month:. . . . . . . . . . {0:M}\n" +
            "(R) RFC1123:. . . . . . . . . {0:R}\n" +
            "(s) Sortable: . . . . . . . . {0:s}\n" +
            "(u) Universal sortable: . . . {0:u} (invariant)\n" +
            "(U) Universal full date/time: {0:U}\n" +
            "(Y) Year: . . . . . . . . . . {0:Y}\n",
            thisDate);

        // Format a Color enumeration value in various ways.
        Console.WriteLine("Standard Enumeration Format Specifiers");
        Console.WriteLine(
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
            "(D) Decimal number: . . . . . {0:D}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            Color.Green);
    }
}
/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
    (default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
    (default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

open System

type Color = 
    | Yellow = 1
    | Blue = 2
    | Green = 3

let thisDate = DateTime.Now

Console.Clear()

// Format a negative integer or floating-point number in various ways.
Console.WriteLine "Standard Numeric Format Specifiers"
Console.WriteLine(
    "(C) Currency: . . . . . . . . {0:C}\n" +
    "(D) Decimal:. . . . . . . . . {0:D}\n" +
    "(E) Scientific: . . . . . . . {1:E}\n" +
    "(F) Fixed point:. . . . . . . {1:F}\n" +
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(N) Number: . . . . . . . . . {0:N}\n" +
    "(P) Percent:. . . . . . . . . {1:P}\n" +
    "(R) Round-trip: . . . . . . . {1:R}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    -123, -123.45f)

// Format the current date in various ways.
Console.WriteLine "Standard DateTime Format Specifiers"
Console.WriteLine(
    "(d) Short date: . . . . . . . {0:d}\n" +
    "(D) Long date:. . . . . . . . {0:D}\n" +
    "(t) Short time: . . . . . . . {0:t}\n" +
    "(T) Long time:. . . . . . . . {0:T}\n" +
    "(f) Full date/short time: . . {0:f}\n" +
    "(F) Full date/long time:. . . {0:F}\n" +
    "(g) General date/short time:. {0:g}\n" +
    "(G) General date/long time: . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(M) Month:. . . . . . . . . . {0:M}\n" +
    "(R) RFC1123:. . . . . . . . . {0:R}\n" +
    "(s) Sortable: . . . . . . . . {0:s}\n" +
    "(u) Universal sortable: . . . {0:u} (invariant)\n" +
    "(U) Universal full date/time: {0:U}\n" +
    "(Y) Year: . . . . . . . . . . {0:Y}\n",
    thisDate)

// Format a Color enumeration value in various ways.
Console.WriteLine "Standard Enumeration Format Specifiers"
Console.WriteLine(
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
    "(D) Decimal number: . . . . . {0:D}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    Color.Green)


// This code example produces the following results:
//
// Standard Numeric Format Specifiers
// (C) Currency: . . . . . . . . ($123.00)
// (D) Decimal:. . . . . . . . . -123
// (E) Scientific: . . . . . . . -1.234500E+002
// (F) Fixed point:. . . . . . . -123.45
// (G) General:. . . . . . . . . -123
//     (default):. . . . . . . . -123 (default = 'G')
// (N) Number: . . . . . . . . . -123.00
// (P) Percent:. . . . . . . . . -12,345.00 %
// (R) Round-trip: . . . . . . . -123.45
// (X) Hexadecimal:. . . . . . . FFFFFF85
//
// Standard DateTime Format Specifiers
// (d) Short date: . . . . . . . 6/26/2004
// (D) Long date:. . . . . . . . Saturday, June 26, 2004
// (t) Short time: . . . . . . . 8:11 PM
// (T) Long time:. . . . . . . . 8:11:04 PM
// (f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
// (F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
// (g) General date/short time:. 6/26/2004 8:11 PM
// (G) General date/long time: . 6/26/2004 8:11:04 PM
//     (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
// (M) Month:. . . . . . . . . . June 26
// (R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
// (s) Sortable: . . . . . . . . 2004-06-26T20:11:04
// (u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
// (U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
// (Y) Year: . . . . . . . . . . June, 2004
//
// Standard Enumeration Format Specifiers
// (G) General:. . . . . . . . . Green
//     (default):. . . . . . . . Green (default = 'G')
// (F) Flags:. . . . . . . . . . Green (flags or integer)
// (D) Decimal number: . . . . . 3
// (X) Hexadecimal:. . . . . . . 00000003
' This code example demonstrates the Console.WriteLine() method.
' Formatting for this example uses the "en-US" culture.

Class Sample
   Public Enum Color
      Yellow = 1
      Blue = 2
      Green = 3
   End Enum 'Color
   Private Shared thisDate As DateTime = DateTime.Now
   
   Public Shared Sub Main()
      Console.Clear()

      ' Format a negative integer or floating-point number in various ways.
      Console.WriteLine("Standard Numeric Format Specifiers")
      Console.WriteLine("(C) Currency: . . . . . . . . {0:C}" & vbCrLf & _
                        "(D) Decimal:. . . . . . . . . {0:D}" & vbCrLf & _
                        "(E) Scientific: . . . . . . . {1:E}" & vbCrLf & _
                        "(F) Fixed point:. . . . . . . {1:F}" & vbCrLf & _
                        "(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(N) Number: . . . . . . . . . {0:N}" & vbCrLf & _
                        "(P) Percent:. . . . . . . . . {1:P}" & vbCrLf & _
                        "(R) Round-trip: . . . . . . . {1:R}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        - 123, - 123.45F)

      ' Format the current date in various ways.
      Console.WriteLine("Standard DateTime Format Specifiers")
      Console.WriteLine("(d) Short date: . . . . . . . {0:d}" & vbCrLf & _
                        "(D) Long date:. . . . . . . . {0:D}" & vbCrLf & _
                        "(t) Short time: . . . . . . . {0:t}" & vbCrLf & _
                        "(T) Long time:. . . . . . . . {0:T}" & vbCrLf & _
                        "(f) Full date/short time: . . {0:f}" & vbCrLf & _
                        "(F) Full date/long time:. . . {0:F}" & vbCrLf & _
                        "(g) General date/short time:. {0:g}" & vbCrLf & _
                        "(G) General date/long time: . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(M) Month:. . . . . . . . . . {0:M}" & vbCrLf & _
                        "(R) RFC1123:. . . . . . . . . {0:R}" & vbCrLf & _
                        "(s) Sortable: . . . . . . . . {0:s}" & vbCrLf & _
                        "(u) Universal sortable: . . . {0:u} (invariant)" & vbCrLf & _
                        "(U) Universal full date/time: {0:U}" & vbCrLf & _
                        "(Y) Year: . . . . . . . . . . {0:Y}" & vbCrLf, _
                        thisDate)

      ' Format a Color enumeration value in various ways.
      Console.WriteLine("Standard Enumeration Format Specifiers")
      Console.WriteLine("(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)" & vbCrLf & _
                        "(D) Decimal number: . . . . . {0:D}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        Color.Green)
   End Sub
End Class
'
'This code example produces the following results:
'
'Standard Numeric Format Specifiers
'(C) Currency: . . . . . . . . ($123.00)
'(D) Decimal:. . . . . . . . . -123
'(E) Scientific: . . . . . . . -1.234500E+002
'(F) Fixed point:. . . . . . . -123.45
'(G) General:. . . . . . . . . -123
'    (default):. . . . . . . . -123 (default = 'G')
'(N) Number: . . . . . . . . . -123.00
'(P) Percent:. . . . . . . . . -12,345.00 %
'(R) Round-trip: . . . . . . . -123.45
'(X) Hexadecimal:. . . . . . . FFFFFF85
'
'Standard DateTime Format Specifiers
'(d) Short date: . . . . . . . 6/26/2004
'(D) Long date:. . . . . . . . Saturday, June 26, 2004
'(t) Short time: . . . . . . . 8:11 PM
'(T) Long time:. . . . . . . . 8:11:04 PM
'(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
'(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
'(g) General date/short time:. 6/26/2004 8:11 PM
'(G) General date/long time: . 6/26/2004 8:11:04 PM
'    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
'(M) Month:. . . . . . . . . . June 26
'(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
'(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
'(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
'(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
'(Y) Year: . . . . . . . . . . June, 2004
'
'Standard Enumeration Format Specifiers
'(G) General:. . . . . . . . . Green
'    (default):. . . . . . . . Green (default = 'G')
'(F) Flags:. . . . . . . . . . Green (flags or integer)
'(D) Decimal number: . . . . . 3
'(X) Hexadecimal:. . . . . . . 00000003
'

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Ta metoda używa funkcji formatowania złożonego platformy .NET, aby przekonwertować wartość obiektu na jego reprezentację tekstową i osadzić tę reprezentację w ciągu. Wynikowy ciąg jest zapisywany do strumienia wyjściowego.

Parametr format składa się z zera lub większej liczby przebiegów tekstu zmieszanego z zero lub większą większa liczba indeksowanych symboli zastępczych, nazywanych elementami formatu, które odpowiadają obiektowi na liście parametrów tej metody. Proces formatowania zastępuje każdy element formatu tekstową reprezentacja wartości odpowiedniego obiektu.

Składnia elementu formatu to {index[,alignment][:formatString]}, który określa obowiązkowy indeks, opcjonalną długość i wyrównanie sformatowanego tekstu oraz opcjonalny ciąg znaków specyfikatora formatu, które określają sposób formatowania wartości odpowiedniego obiektu.

Platforma .NET zapewnia rozbudowaną obsługę formatowania, która została szczegółowo opisana w poniższych tematach formatowania.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Uwagi dotyczące wywoływania

Ta metoda nie jest wywoływana przez kod C++. Kompilator języka C++ rozpoznaje wywołania elementu System.Console.WriteLine , które zawierają ciąg i listę czterech lub więcej parametrów obiektu jako wywołanie metody WriteLine(String, Object, Object, Object, Object). Rozwiązuje ona wywołania elementu System.Console.WriteLine , które zawierają ciąg i tablicę obiektów jako wywołanie metody WriteLine(String, Object).

Zobacz też

Dotyczy

WriteLine(String, Object)

Zapisuje reprezentację tekstową określonego obiektu, po którym następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

public:
 static void WriteLine(System::String ^ format, System::Object ^ arg0);
public static void WriteLine (string format, object? arg0);
public static void WriteLine (string format, object arg0);
static member WriteLine : string * obj -> unit
Public Shared Sub WriteLine (format As String, arg0 As Object)

Parametry

format
String

Ciąg formatu złożonego.

arg0
Object

Obiekt do zapisania przy użyciu polecenia format.

Wyjątki

Wystąpił błąd we/wy.

format to null.

Specyfikacja formatu w pliku format jest nieprawidłowa.

Przykłady

Poniższy przykład wywołuje metodę WriteLine(String, Object) , aby wyświetlić pięć losowo wygenerowanych Boolean wartości.

Random rnd = new Random();
// Generate five random Boolean values.
for (int ctr = 1; ctr <= 5; ctr++) {
   bool bln = rnd.Next(0, 2) == 1;
   Console.WriteLine($"True or False: {bln}");
}

// The example displays an output similar to the following:
//       True or False: False
//       True or False: True
//       True or False: False
//       True or False: False
//       True or False: True
let rnd = Random()

// Generate five random Boolean values.
for _ = 1 to 5 do
    let bln = rnd.Next(0, 2) = 1
    Console.WriteLine $"True or False: {bln}"

// The example displays an output similar to the following:
//       True or False: False
//       True or False: True
//       True or False: False
//       True or False: False
//       True or False: True
Module Example
   Public Sub Main()
      Dim rnd As New Random()
      ' Generate five random Boolean values.
      For ctr As Integer = 1 To 5
         Dim bool As Boolean = Convert.ToBoolean(rnd.Next(0, 2))
         Console.WriteLine("True or False: {0}", bool)
      Next
   End Sub
End Module
' The example displays the following output:
'       True or False: False
'       True or False: True
'       True or False: False
'       True or False: False
'       True or False: True

Poniższy przykład wywołuje metodę WriteLine(String, Object) , aby wyświetlić bieżącą datę. Należy pamiętać, że element formatu w argumencie format używa standardowego ciągu formatu daty i godziny "D", aby wyświetlić datę w formacie daty długiej bieżącej kultury.

using System;

public class Example
{
   public static void Main()
   {
      Console.WriteLine("Today's date: {0:D}", DateTime.Now);
   }
}
// The example displays output like the following:
//       Today's date: Monday, April 1, 2019
open System

Console.WriteLine $"Today's date: {DateTime.Now:D}"

// The example displays output like the following:
//       Today's date: Tuesday, December 28, 2021
Module Example
   Public Sub Main()
      Console.WriteLine("Today's date: {0:D}", DateTime.Now)
   End Sub
End Module
' The example displays output like the following:
'       Today's date: Friday, April 1, 2016

Uwagi

Ta metoda używa funkcji formatowania złożonego platformy .NET, aby przekonwertować wartość obiektu na jego reprezentację tekstową i osadzić tę reprezentację w ciągu. Wynikowy ciąg jest zapisywany do strumienia wyjściowego.

Parametr format składa się z zera lub większej liczby przebiegów tekstu zmieszanego z zero lub większą większa liczba indeksowanych symboli zastępczych, nazywanych elementami formatu, które odpowiadają obiektowi na liście parametrów tej metody. Proces formatowania zastępuje każdy element formatu tekstową reprezentacja wartości odpowiedniego obiektu.

Składnia elementu formatu to {index[,alignment][:formatString]}, który określa obowiązkowy indeks, opcjonalną długość i wyrównanie sformatowanego tekstu oraz opcjonalny ciąg znaków specyfikatora formatu, które określają sposób formatowania wartości odpowiedniego obiektu.

Platforma .NET zapewnia rozbudowaną obsługę formatowania, która została szczegółowo opisana w poniższych tematach formatowania.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(UInt64)

Ważne

Ten interfejs API nie jest zgodny ze specyfikacją CLS.

Zapisuje reprezentację tekstową określonej 64-bitowej niepodpisanej wartości całkowitej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(System::UInt64 value);
[System.CLSCompliant(false)]
public static void WriteLine (ulong value);
[<System.CLSCompliant(false)>]
static member WriteLine : uint64 -> unit
Public Shared Sub WriteLine (value As ULong)

Parametry

value
UInt64

Wartość do zapisu.

Atrybuty

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie UInt64.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(UInt32)

Ważne

Ten interfejs API nie jest zgodny ze specyfikacją CLS.

Zapisuje reprezentację tekstową określonej 32-bitowej niepodpisanej wartości całkowitej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(System::UInt32 value);
[System.CLSCompliant(false)]
public static void WriteLine (uint value);
[<System.CLSCompliant(false)>]
static member WriteLine : uint32 -> unit
Public Shared Sub WriteLine (value As UInteger)

Parametry

value
UInt32

Wartość do zapisu.

Atrybuty

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie UInt32.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Single)

Zapisuje reprezentację tekstową określonej wartości zmiennoprzecinkowej o pojedynczej precyzji, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(float value);
public static void WriteLine (float value);
static member WriteLine : single -> unit
Public Shared Sub WriteLine (value As Single)

Parametry

value
Single

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Single.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Decimal)

Zapisuje reprezentację tekstową określonej Decimal wartości, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(System::Decimal value);
public static void WriteLine (decimal value);
static member WriteLine : decimal -> unit
Public Shared Sub WriteLine (value As Decimal)

Parametry

value
Decimal

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Decimal.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Int64)

Zapisuje tekstową reprezentację określonej 64-bitowej liczby całkowitej ze znakiem, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(long value);
public static void WriteLine (long value);
static member WriteLine : int64 -> unit
Public Shared Sub WriteLine (value As Long)

Parametry

value
Int64

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Int64.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Int32)

Zapisuje reprezentację tekstową określonej 32-bitowej liczby całkowitej ze znakiem, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(int value);
public static void WriteLine (int value);
static member WriteLine : int -> unit
Public Shared Sub WriteLine (value As Integer)

Parametry

value
Int32

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Int32.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Double)

Zapisuje reprezentację tekstową określonej wartości zmiennoprzecinkowej o podwójnej precyzji, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(double value);
public static void WriteLine (double value);
static member WriteLine : double -> unit
Public Shared Sub WriteLine (value As Double)

Parametry

value
Double

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Double.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Char[])

Zapisuje określoną tablicę znaków Unicode, a następnie bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine(cli::array <char> ^ buffer);
public static void WriteLine (char[]? buffer);
public static void WriteLine (char[] buffer);
static member WriteLine : char[] -> unit
Public Shared Sub WriteLine (buffer As Char())

Parametry

buffer
Char[]

Tablica znaków Unicode.

Wyjątki

Wystąpił błąd we/wy.

Uwagi

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Char)

Zapisuje określony znak Unicode, po którym następuje bieżący terminator wiersza, wartość standardowego strumienia wyjściowego.

public:
 static void WriteLine(char value);
public static void WriteLine (char value);
static member WriteLine : char -> unit
Public Shared Sub WriteLine (value As Char)

Parametry

value
Char

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Boolean)

Zapisuje reprezentację tekstową określonej wartości logicznej, po której następuje bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(bool value);
public static void WriteLine (bool value);
static member WriteLine : bool -> unit
Public Shared Sub WriteLine (value As Boolean)

Parametry

value
Boolean

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Poniższy przykład generuje dziesięć losowych liczb całkowitych i używa Console.WriteLine(Boolean) metody , aby wskazać, czy są równe.

using namespace System;

void main()
{
   // Assign 10 random integers to an array.
   Random^ rnd = gcnew Random();
   array<Int32>^ numbers = gcnew array<Int32>(10); 
   for (int ctr = 0; ctr <= numbers->GetUpperBound(0); ctr++)
      numbers[ctr] = rnd->Next();

   // Determine whether the numbers are even or odd.
   for each (Int32 number in numbers) {
      bool even = (number % 2 == 0);
      Console::WriteLine("Is {0} even:", number);
      Console::WriteLine(even);
      Console::WriteLine();      
   }
}
// Assign 10 random integers to an array.
Random rnd = new Random();
int[] numbers = new int[10];
for (int ctr = 0; ctr <= numbers.GetUpperBound(0); ctr++)
   numbers[ctr] = rnd.Next();

// Determine whether the numbers are even or odd.
foreach (var number in numbers) {
   bool even = (number % 2 == 0);
   Console.WriteLine("Is {0} even:", number);
   Console.WriteLine(even);
   Console.WriteLine();
}
// Assign 10 random integers to an array.
let rnd = Random()
let numbers = 
    [ for _ = 0 to 9 do
        rnd.Next()]

// Determine whether the numbers are even or odd.
for number in numbers do
    let even = number % 2 = 0
    Console.WriteLine $"Is {number} even:"
    Console.WriteLine even
    Console.WriteLine()
Module Example
   Public Sub Main()
      ' Assign 10 random integers to an array.
      Dim rnd As New Random()
      Dim numbers(9) As Integer
      For ctr As Integer = 0 To numbers.GetUpperBound(0)
         numbers(ctr) = rnd.Next
      Next
      
      ' Determine whether the numbers are even or odd.
      For Each number In numbers
         Dim even As Boolean = (number mod 2 = 0)
         Console.WriteLine("Is {0} even:", number)
         Console.WriteLine(even)
         Console.WriteLine()      
      Next
   End Sub
End Module

Uwagi

Tekstowa reprezentacja value elementu jest generowany przez wywołanie Boolean.ToString metody .

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine()

Zapisuje bieżący terminator wiersza do standardowego strumienia wyjściowego.

public:
 static void WriteLine();
public static void WriteLine ();
static member WriteLine : unit -> unit
Public Shared Sub WriteLine ()

Wyjątki

Wystąpił błąd we/wy.

Przykłady

Przykład zmienia terminator wiersza z wartości domyślnej "\r\n" lub vbCrLf "\r\n\r\n" lub + vbCrLf``vbCrLf . Następnie wywołuje WriteLine() metody i WriteLine(String) w celu wyświetlenia danych wyjściowych do konsoli.

using namespace System;

void main()
{
   array<String^>^ lines = gcnew array<String^> { "This is the first line.", 
                                                  "This is the second line." };
   // Output the lines using the default newline sequence.
   Console::WriteLine("With the default new line characters:");
   Console::WriteLine();
   for each (String^ line in lines)
      Console::WriteLine(line);

   Console::WriteLine();

   // Redefine the newline characters to double space.
   Console::Out->NewLine = "\r\n\r\n";
   // Output the lines using the new newline sequence.
   Console::WriteLine("With redefined new line characters:");
   Console::WriteLine();
   for each (String^ line in lines)
      Console::WriteLine(line);
}
// The example displays the following output:
//       With the default new line characters:
//       
//       This is the first line.
//       This is the second line.
//       
//       With redefined new line characters:
//       
//       
//       
//       This is the first line.
//       
//       This is the second line.
string[] lines = { "This is the first line.",
                   "This is the second line." };
// Output the lines using the default newline sequence.
Console.WriteLine("With the default new line characters:");
Console.WriteLine();
foreach (string line in lines)
   Console.WriteLine(line);

Console.WriteLine();

// Redefine the newline characters to double space.
Console.Out.NewLine = "\r\n\r\n";
// Output the lines using the new newline sequence.
Console.WriteLine("With redefined new line characters:");
Console.WriteLine();
foreach (string line in lines)
   Console.WriteLine(line);

// The example displays the following output:
//       With the default new line characters:
//
//       This is the first line.
//       This is the second line.
//
//       With redefined new line characters:
//
//
//
//       This is the first line.
//
//       This is the second line.
let lines = 
    [ "This is the first line."
      "This is the second line." ]
      
// Output the lines using the default newline sequence.
Console.WriteLine "With the default new line characters:"
Console.WriteLine()
for line in lines do
    Console.WriteLine line

Console.WriteLine()

// Redefine the newline characters to double space.
Console.Out.NewLine <- "\r\n\r\n"
// Output the lines using the new newline sequence.
Console.WriteLine "With redefined new line characters:"
Console.WriteLine()
for line in lines do
    Console.WriteLine line

// The example displays the following output:
//       With the default new line characters:
//
//       This is the first line.
//       This is the second line.
//
//       With redefined new line characters:
//
//
//
//       This is the first line.
//
//       This is the second line.
Module Example
   Public Sub Main()
      Dim lines() As String = { "This is the first line.", _
                                "This is the second line." }
      ' Output the lines using the default newline sequence.
      Console.WriteLine("With the default new line characters:")
      Console.WriteLine()
      For Each line As String In lines
         Console.WriteLine(line)
      Next
      Console.WriteLine()
      
      ' Redefine the newline characters to double space.
      Console.Out.NewLine = vbCrLf + vbCrLf
      ' Output the lines using the new newline sequence.
      Console.WriteLine("With redefined new line characters:")
      Console.WriteLine()
      For Each line As String In lines
         Console.WriteLine(line)
      Next
   End Sub
End Module
' The example displays the following output:
'       With the default new line characters:
'       
'       This is the first line.
'       This is the second line.
'       
'       With redefined new line characters:
'       
'       
'       
'       This is the first line.
'       
'       This is the second line.

Uwagi

Domyślny terminator wiersza to ciąg, którego wartość jest zwracanym karetkiem, po którym następuje źródło wiersza ("\r\n" w języku C# lub vbCrLf w Visual Basic). Terminator wiersza można zmienić, ustawiając TextWriter.NewLine właściwość właściwości Out na inny ciąg. Przykład stanowi ilustrację.

Zobacz też

Dotyczy

WriteLine(String, Object, Object, Object)

Zapisuje reprezentację tekstową określonych obiektów, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

public:
 static void WriteLine(System::String ^ format, System::Object ^ arg0, System::Object ^ arg1, System::Object ^ arg2);
public static void WriteLine (string format, object? arg0, object? arg1, object? arg2);
public static void WriteLine (string format, object arg0, object arg1, object arg2);
static member WriteLine : string * obj * obj * obj -> unit
Public Shared Sub WriteLine (format As String, arg0 As Object, arg1 As Object, arg2 As Object)

Parametry

format
String

Ciąg formatu złożonego.

arg0
Object

Pierwszy obiekt do zapisania przy użyciu polecenia format.

arg1
Object

Drugi obiekt do zapisania przy użyciu polecenia format.

arg2
Object

Trzeci obiekt do zapisania przy użyciu polecenia format.

Wyjątki

Wystąpił błąd we/wy.

format to null.

Specyfikacja formatu w pliku format jest nieprawidłowa.

Przykłady

Poniższy przykład ilustruje standardowe specyfikatory formatowania liczb, dat i wyliczeń.

// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using namespace System;

public enum class Color {Yellow = 1, Blue, Green};

int main() 
{
    DateTime thisDate = DateTime::Now;
    Console::Clear();

    // Format a negative integer or floating-point number in various ways.
    Console::WriteLine("Standard Numeric Format Specifiers");
    Console::WriteLine(
        "(C) Currency: . . . . . . . . {0:C}\n" +
        "(D) Decimal:. . . . . . . . . {0:D}\n" +
        "(E) Scientific: . . . . . . . {1:E}\n" +
        "(F) Fixed point:. . . . . . . {1:F}\n" +
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(N) Number: . . . . . . . . . {0:N}\n" +
        "(P) Percent:. . . . . . . . . {1:P}\n" +
        "(R) Round-trip: . . . . . . . {1:R}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n",
        -123, -123.45f); 

    // Format the current date in various ways.
    Console::WriteLine("Standard DateTime Format Specifiers");
    Console::WriteLine(
        "(d) Short date: . . . . . . . {0:d}\n" +
        "(D) Long date:. . . . . . . . {0:D}\n" +
        "(t) Short time: . . . . . . . {0:t}\n" +
        "(T) Long time:. . . . . . . . {0:T}\n" +
        "(f) Full date/short time: . . {0:f}\n" +
        "(F) Full date/long time:. . . {0:F}\n" +
        "(g) General date/short time:. {0:g}\n" +
        "(G) General date/long time: . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(M) Month:. . . . . . . . . . {0:M}\n" +
        "(R) RFC1123:. . . . . . . . . {0:R}\n" +
        "(s) Sortable: . . . . . . . . {0:s}\n" +
        "(u) Universal sortable: . . . {0:u} (invariant)\n" +
        "(U) Universal full date/time: {0:U}\n" +
        "(Y) Year: . . . . . . . . . . {0:Y}\n", 
        thisDate);

    // Format a Color enumeration value in various ways.
    Console::WriteLine("Standard Enumeration Format Specifiers");
    Console::WriteLine(
        "(G) General:. . . . . . . . . {0:G}\n" +
        "    (default):. . . . . . . . {0} (default = 'G')\n" +
        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
        "(D) Decimal number: . . . . . {0:D}\n" +
        "(X) Hexadecimal:. . . . . . . {0:X}\n", 
        Color::Green);       

};


/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
(default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
(default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
(default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

using System;
class Sample
{
    enum Color {Yellow = 1, Blue, Green};
    static DateTime thisDate = DateTime.Now;

    public static void Main()
    {
        Console.Clear();

        // Format a negative integer or floating-point number in various ways.
        Console.WriteLine("Standard Numeric Format Specifiers");
        Console.WriteLine(
            "(C) Currency: . . . . . . . . {0:C}\n" +
            "(D) Decimal:. . . . . . . . . {0:D}\n" +
            "(E) Scientific: . . . . . . . {1:E}\n" +
            "(F) Fixed point:. . . . . . . {1:F}\n" +
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(N) Number: . . . . . . . . . {0:N}\n" +
            "(P) Percent:. . . . . . . . . {1:P}\n" +
            "(R) Round-trip: . . . . . . . {1:R}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            -123, -123.45f);

        // Format the current date in various ways.
        Console.WriteLine("Standard DateTime Format Specifiers");
        Console.WriteLine(
            "(d) Short date: . . . . . . . {0:d}\n" +
            "(D) Long date:. . . . . . . . {0:D}\n" +
            "(t) Short time: . . . . . . . {0:t}\n" +
            "(T) Long time:. . . . . . . . {0:T}\n" +
            "(f) Full date/short time: . . {0:f}\n" +
            "(F) Full date/long time:. . . {0:F}\n" +
            "(g) General date/short time:. {0:g}\n" +
            "(G) General date/long time: . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(M) Month:. . . . . . . . . . {0:M}\n" +
            "(R) RFC1123:. . . . . . . . . {0:R}\n" +
            "(s) Sortable: . . . . . . . . {0:s}\n" +
            "(u) Universal sortable: . . . {0:u} (invariant)\n" +
            "(U) Universal full date/time: {0:U}\n" +
            "(Y) Year: . . . . . . . . . . {0:Y}\n",
            thisDate);

        // Format a Color enumeration value in various ways.
        Console.WriteLine("Standard Enumeration Format Specifiers");
        Console.WriteLine(
            "(G) General:. . . . . . . . . {0:G}\n" +
            "    (default):. . . . . . . . {0} (default = 'G')\n" +
            "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
            "(D) Decimal number: . . . . . {0:D}\n" +
            "(X) Hexadecimal:. . . . . . . {0:X}\n",
            Color.Green);
    }
}
/*
This code example produces the following results:

Standard Numeric Format Specifiers
(C) Currency: . . . . . . . . ($123.00)
(D) Decimal:. . . . . . . . . -123
(E) Scientific: . . . . . . . -1.234500E+002
(F) Fixed point:. . . . . . . -123.45
(G) General:. . . . . . . . . -123
    (default):. . . . . . . . -123 (default = 'G')
(N) Number: . . . . . . . . . -123.00
(P) Percent:. . . . . . . . . -12,345.00 %
(R) Round-trip: . . . . . . . -123.45
(X) Hexadecimal:. . . . . . . FFFFFF85

Standard DateTime Format Specifiers
(d) Short date: . . . . . . . 6/26/2004
(D) Long date:. . . . . . . . Saturday, June 26, 2004
(t) Short time: . . . . . . . 8:11 PM
(T) Long time:. . . . . . . . 8:11:04 PM
(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
(g) General date/short time:. 6/26/2004 8:11 PM
(G) General date/long time: . 6/26/2004 8:11:04 PM
    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
(M) Month:. . . . . . . . . . June 26
(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
(Y) Year: . . . . . . . . . . June, 2004

Standard Enumeration Format Specifiers
(G) General:. . . . . . . . . Green
    (default):. . . . . . . . Green (default = 'G')
(F) Flags:. . . . . . . . . . Green (flags or integer)
(D) Decimal number: . . . . . 3
(X) Hexadecimal:. . . . . . . 00000003

*/
// This code example demonstrates the Console.WriteLine() method.
// Formatting for this example uses the "en-US" culture.

open System

type Color = 
    | Yellow = 1
    | Blue = 2
    | Green = 3

let thisDate = DateTime.Now

Console.Clear()

// Format a negative integer or floating-point number in various ways.
Console.WriteLine "Standard Numeric Format Specifiers"
Console.WriteLine(
    "(C) Currency: . . . . . . . . {0:C}\n" +
    "(D) Decimal:. . . . . . . . . {0:D}\n" +
    "(E) Scientific: . . . . . . . {1:E}\n" +
    "(F) Fixed point:. . . . . . . {1:F}\n" +
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(N) Number: . . . . . . . . . {0:N}\n" +
    "(P) Percent:. . . . . . . . . {1:P}\n" +
    "(R) Round-trip: . . . . . . . {1:R}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    -123, -123.45f)

// Format the current date in various ways.
Console.WriteLine "Standard DateTime Format Specifiers"
Console.WriteLine(
    "(d) Short date: . . . . . . . {0:d}\n" +
    "(D) Long date:. . . . . . . . {0:D}\n" +
    "(t) Short time: . . . . . . . {0:t}\n" +
    "(T) Long time:. . . . . . . . {0:T}\n" +
    "(f) Full date/short time: . . {0:f}\n" +
    "(F) Full date/long time:. . . {0:F}\n" +
    "(g) General date/short time:. {0:g}\n" +
    "(G) General date/long time: . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(M) Month:. . . . . . . . . . {0:M}\n" +
    "(R) RFC1123:. . . . . . . . . {0:R}\n" +
    "(s) Sortable: . . . . . . . . {0:s}\n" +
    "(u) Universal sortable: . . . {0:u} (invariant)\n" +
    "(U) Universal full date/time: {0:U}\n" +
    "(Y) Year: . . . . . . . . . . {0:Y}\n",
    thisDate)

// Format a Color enumeration value in various ways.
Console.WriteLine "Standard Enumeration Format Specifiers"
Console.WriteLine(
    "(G) General:. . . . . . . . . {0:G}\n" +
    "    (default):. . . . . . . . {0} (default = 'G')\n" +
    "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)\n" +
    "(D) Decimal number: . . . . . {0:D}\n" +
    "(X) Hexadecimal:. . . . . . . {0:X}\n",
    Color.Green)


// This code example produces the following results:
//
// Standard Numeric Format Specifiers
// (C) Currency: . . . . . . . . ($123.00)
// (D) Decimal:. . . . . . . . . -123
// (E) Scientific: . . . . . . . -1.234500E+002
// (F) Fixed point:. . . . . . . -123.45
// (G) General:. . . . . . . . . -123
//     (default):. . . . . . . . -123 (default = 'G')
// (N) Number: . . . . . . . . . -123.00
// (P) Percent:. . . . . . . . . -12,345.00 %
// (R) Round-trip: . . . . . . . -123.45
// (X) Hexadecimal:. . . . . . . FFFFFF85
//
// Standard DateTime Format Specifiers
// (d) Short date: . . . . . . . 6/26/2004
// (D) Long date:. . . . . . . . Saturday, June 26, 2004
// (t) Short time: . . . . . . . 8:11 PM
// (T) Long time:. . . . . . . . 8:11:04 PM
// (f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
// (F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
// (g) General date/short time:. 6/26/2004 8:11 PM
// (G) General date/long time: . 6/26/2004 8:11:04 PM
//     (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
// (M) Month:. . . . . . . . . . June 26
// (R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
// (s) Sortable: . . . . . . . . 2004-06-26T20:11:04
// (u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
// (U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
// (Y) Year: . . . . . . . . . . June, 2004
//
// Standard Enumeration Format Specifiers
// (G) General:. . . . . . . . . Green
//     (default):. . . . . . . . Green (default = 'G')
// (F) Flags:. . . . . . . . . . Green (flags or integer)
// (D) Decimal number: . . . . . 3
// (X) Hexadecimal:. . . . . . . 00000003
' This code example demonstrates the Console.WriteLine() method.
' Formatting for this example uses the "en-US" culture.

Class Sample
   Public Enum Color
      Yellow = 1
      Blue = 2
      Green = 3
   End Enum 'Color
   Private Shared thisDate As DateTime = DateTime.Now
   
   Public Shared Sub Main()
      Console.Clear()

      ' Format a negative integer or floating-point number in various ways.
      Console.WriteLine("Standard Numeric Format Specifiers")
      Console.WriteLine("(C) Currency: . . . . . . . . {0:C}" & vbCrLf & _
                        "(D) Decimal:. . . . . . . . . {0:D}" & vbCrLf & _
                        "(E) Scientific: . . . . . . . {1:E}" & vbCrLf & _
                        "(F) Fixed point:. . . . . . . {1:F}" & vbCrLf & _
                        "(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(N) Number: . . . . . . . . . {0:N}" & vbCrLf & _
                        "(P) Percent:. . . . . . . . . {1:P}" & vbCrLf & _
                        "(R) Round-trip: . . . . . . . {1:R}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        - 123, - 123.45F)

      ' Format the current date in various ways.
      Console.WriteLine("Standard DateTime Format Specifiers")
      Console.WriteLine("(d) Short date: . . . . . . . {0:d}" & vbCrLf & _
                        "(D) Long date:. . . . . . . . {0:D}" & vbCrLf & _
                        "(t) Short time: . . . . . . . {0:t}" & vbCrLf & _
                        "(T) Long time:. . . . . . . . {0:T}" & vbCrLf & _
                        "(f) Full date/short time: . . {0:f}" & vbCrLf & _
                        "(F) Full date/long time:. . . {0:F}" & vbCrLf & _
                        "(g) General date/short time:. {0:g}" & vbCrLf & _
                        "(G) General date/long time: . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(M) Month:. . . . . . . . . . {0:M}" & vbCrLf & _
                        "(R) RFC1123:. . . . . . . . . {0:R}" & vbCrLf & _
                        "(s) Sortable: . . . . . . . . {0:s}" & vbCrLf & _
                        "(u) Universal sortable: . . . {0:u} (invariant)" & vbCrLf & _
                        "(U) Universal full date/time: {0:U}" & vbCrLf & _
                        "(Y) Year: . . . . . . . . . . {0:Y}" & vbCrLf, _
                        thisDate)

      ' Format a Color enumeration value in various ways.
      Console.WriteLine("Standard Enumeration Format Specifiers")
      Console.WriteLine("(G) General:. . . . . . . . . {0:G}" & vbCrLf & _
                        "    (default):. . . . . . . . {0} (default = 'G')" & vbCrLf & _
                        "(F) Flags:. . . . . . . . . . {0:F} (flags or integer)" & vbCrLf & _
                        "(D) Decimal number: . . . . . {0:D}" & vbCrLf & _
                        "(X) Hexadecimal:. . . . . . . {0:X}" & vbCrLf, _
                        Color.Green)
   End Sub
End Class
'
'This code example produces the following results:
'
'Standard Numeric Format Specifiers
'(C) Currency: . . . . . . . . ($123.00)
'(D) Decimal:. . . . . . . . . -123
'(E) Scientific: . . . . . . . -1.234500E+002
'(F) Fixed point:. . . . . . . -123.45
'(G) General:. . . . . . . . . -123
'    (default):. . . . . . . . -123 (default = 'G')
'(N) Number: . . . . . . . . . -123.00
'(P) Percent:. . . . . . . . . -12,345.00 %
'(R) Round-trip: . . . . . . . -123.45
'(X) Hexadecimal:. . . . . . . FFFFFF85
'
'Standard DateTime Format Specifiers
'(d) Short date: . . . . . . . 6/26/2004
'(D) Long date:. . . . . . . . Saturday, June 26, 2004
'(t) Short time: . . . . . . . 8:11 PM
'(T) Long time:. . . . . . . . 8:11:04 PM
'(f) Full date/short time: . . Saturday, June 26, 2004 8:11 PM
'(F) Full date/long time:. . . Saturday, June 26, 2004 8:11:04 PM
'(g) General date/short time:. 6/26/2004 8:11 PM
'(G) General date/long time: . 6/26/2004 8:11:04 PM
'    (default):. . . . . . . . 6/26/2004 8:11:04 PM (default = 'G')
'(M) Month:. . . . . . . . . . June 26
'(R) RFC1123:. . . . . . . . . Sat, 26 Jun 2004 20:11:04 GMT
'(s) Sortable: . . . . . . . . 2004-06-26T20:11:04
'(u) Universal sortable: . . . 2004-06-26 20:11:04Z (invariant)
'(U) Universal full date/time: Sunday, June 27, 2004 3:11:04 AM
'(Y) Year: . . . . . . . . . . June, 2004
'
'Standard Enumeration Format Specifiers
'(G) General:. . . . . . . . . Green
'    (default):. . . . . . . . Green (default = 'G')
'(F) Flags:. . . . . . . . . . Green (flags or integer)
'(D) Decimal number: . . . . . 3
'(X) Hexadecimal:. . . . . . . 00000003
'

Poniższy przykład to kalkulator porad, który oblicza 18% końcówki i używa WriteLine metody do wyświetlania kwoty oryginalnej opłaty, kwoty końcówki i całkowitej kwoty. W przykładzie występuje aplikacja konsoli, która wymaga, aby użytkownik podał kwotę bazowej należności jako parametr wiersza polecenia.

using System;

public class TipCalculator
{
    private const double tipRate = 0.18;
    public static void Main(string[] args)
    {
        double billTotal;
        if (args.Length == 0 || ! Double.TryParse(args[0], out billTotal))
        {
            Console.WriteLine("usage: TIPCALC total");
            return;
        }
        double tip = billTotal * tipRate;
        Console.WriteLine();
        Console.WriteLine($"Bill total:\t{billTotal,8:c}");
        Console.WriteLine($"Tip total/rate:\t{tip,8:c} ({tipRate:p1})");
        Console.WriteLine(("").PadRight(24, '-'));
        Console.WriteLine($"Grand total:\t{billTotal + tip,8:c}");
    }
}

/*
>tipcalc 52.23

Bill total:       $52.23
Tip total/rate:    $9.40 (18.0 %)
------------------------
Grand total:      $61.63
*/
open System

let tipRate = 0.18

let args = Environment.GetCommandLineArgs()[1..] 

if args.Length = 0 then 
    Console.WriteLine "usage: TIPCALC total"
else
    match Double.TryParse args[0] with
    | true, billTotal ->
        let tip = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine $"Bill total:\t{billTotal,8:c}" 
        Console.WriteLine $"Tip total/rate:\t{tip,8:c} ({tipRate:p1})"
        Console.WriteLine("".PadRight(24, '-'))
        Console.WriteLine $"Grand total:\t{billTotal + tip,8:c}" 
    | _ ->
        Console.WriteLine "usage: TIPCALC total"

// >tipcalc 52.23
//
// Bill total:       $52.23
// Tip total/rate:    $9.40 (18.0 %)
// ------------------------
// Grand total:      $61.63
Public Module TipCalculator
    Private Const tipRate As Double = 0.18
   
    Public Sub Main(args As String())
        Dim billTotal As Double
        If (args.Length = 0) OrElse (Not Double.TryParse(args(0), billTotal)) Then
            Console.WriteLine("usage: TIPCALC total")
            Return
        End If

        Dim tip As Double = billTotal * tipRate
        Console.WriteLine()
        Console.WriteLine($"Bill total:{vbTab}{billTotal,8:c}")
        Console.WriteLine($"Tip total/rate:{vbTab}{tip,8:c} ({tipRate:p1})")
        Console.WriteLine("".PadRight(24, "-"c))
        Console.WriteLine($"Grand total:{vbTab}{billTotal + tip,8:c}")
    End Sub

End Module

'Example Output:
'---------------
' >tipcalc 52.23
' 
' Bill total:       $52.23
' Tip total/rate:    $9.40 (18.0 %)
' ------------------------
' Grand total:      $61.63

Uwagi

Ta metoda używa funkcji formatowania złożonego platformy .NET, aby przekonwertować wartość obiektu na jego reprezentację tekstową i osadzić tę reprezentację w ciągu. Wynikowy ciąg jest zapisywany do strumienia wyjściowego.

Parametr format składa się z zera lub większej liczby przebiegów tekstu zmieszanego z zero lub większą większa liczba indeksowanych symboli zastępczych, nazywanych elementami formatu, które odpowiadają obiektowi na liście parametrów tej metody. Proces formatowania zastępuje każdy element formatu tekstową reprezentacja wartości odpowiedniego obiektu.

Składnia elementu formatu to {index[,alignment][:formatString]}, który określa obowiązkowy indeks, opcjonalną długość i wyrównanie sformatowanego tekstu oraz opcjonalny ciąg znaków specyfikatora formatu, które określają sposób formatowania wartości odpowiedniego obiektu.

Platforma .NET zapewnia rozbudowaną obsługę formatowania, która została szczegółowo opisana w poniższych tematach formatowania.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(Object)

Zapisuje reprezentację tekstową określonego obiektu, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego.

public:
 static void WriteLine(System::Object ^ value);
public static void WriteLine (object? value);
public static void WriteLine (object value);
static member WriteLine : obj -> unit
Public Shared Sub WriteLine (value As Object)

Parametry

value
Object

Wartość do zapisu.

Wyjątki

Wystąpił błąd we/wy.

Przykłady

W poniższym przykładzie użyto WriteLine(Object) metody , aby wyświetlić każdą wartość w tablicy obiektów w konsoli programu .

using namespace System;

void main()
{
   array<Object^>^ values = { true, 12.632, 17908, "stringValue",
                              'a', (Decimal) 16907.32 };
   for each (Object^ value in values)
      Console::WriteLine(value);
}
// The example displays the following output:
//    True
//    12.632
//    17908
//    stringValue
//    a
//    16907.32
Object[] values = { true, 12.632, 17908, "stringValue",
                           'a', 16907.32m };
foreach (var value in values)
   Console.WriteLine(value);

// The example displays the following output:
//    True
//    12.632
//    17908
//    stringValue
//    a
//    16907.32
let values: obj [] = 
    [| true; 12.632; 17908; "stringValue"; 'a'; 16907.32M |]

for value in values do
   Console.WriteLine value

// The example displays the following output:
//    True
//    12.632
//    17908
//    stringValue
//    a
//    16907.32
Module Example
   Public Sub Main()
      Dim values() As Object = { True, 12.632, 17908, "stringValue",
                                 "a"c, 16907.32d }
      For Each value In values
         Console.WriteLine(value)
      Next                           
   End Sub
End Module
' The example displays the following output:
'    True
'    12.632
'    17908
'    stringValue
'    a
'    16907.32

Uwagi

Jeśli value parametr ma nullwartość , jest zapisywany tylko terminator wiersza. W przeciwnym razie metoda metody jest wywoływana value w ToString celu utworzenia reprezentacji ciągu, a wynikowy ciąg jest zapisywany w standardowym strumieniu wyjściowym.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Zobacz też

Dotyczy

WriteLine(String, Object, Object, Object, Object)

Ważne

Ten interfejs API nie jest zgodny ze specyfikacją CLS.

Zapisuje tekstową reprezentację określonych obiektów i listy parametrów o zmiennej długości, a następnie bieżący terminator wiersza, do standardowego strumienia wyjściowego przy użyciu określonych informacji o formacie.

public:
 static void WriteLine(System::String ^ format, System::Object ^ arg0, System::Object ^ arg1, System::Object ^ arg2, System::Object ^ arg3);
[System.CLSCompliant(false)]
public static void WriteLine (string format, object arg0, object arg1, object arg2, object arg3);
[<System.CLSCompliant(false)>]
static member WriteLine : string * obj * obj * obj * obj -> unit
Public Shared Sub WriteLine (format As String, arg0 As Object, arg1 As Object, arg2 As Object, arg3 As Object)

Parametry

format
String

Ciąg formatu złożonego.

arg0
Object

Pierwszy obiekt do zapisania przy użyciu polecenia format.

arg1
Object

Drugi obiekt do zapisania przy użyciu polecenia format.

arg2
Object

Trzeci obiekt do zapisania przy użyciu polecenia format.

arg3
Object

Czwarty obiekt do zapisania przy użyciu polecenia format.

Atrybuty

Wyjątki

Wystąpił błąd we/wy.

format to null.

Specyfikacja formatu w pliku format jest nieprawidłowa.

Przykłady

Poniższy przykład ilustruje użycie argumentów zmiennych z WriteLine(String, Object, Object, Object, Object) metodą . Metoda jest wywoływana z ciągiem formatu złożonego i pięcioma elementami formatu.

using namespace System;

int CountLetters(String^ value);
int CountWhitespace(String^ value);

void main()
{
   String^ value = "This is a test string.";
   
   
   Console::WriteLine("The string '{0}' consists of:" +
                      "{4}{1} characters{4}{2} letters{4}" +
                      "{3} white-space characters", 
                      value, value->Length, CountLetters(value), 
                      CountWhitespace(value), Environment::NewLine);
}

int CountLetters(String^ value)
{
   int nLetters = 0;
   for each (Char ch in value) {
      if (Char::IsLetter(ch))
         nLetters++;
   }
   return nLetters;
}

int CountWhitespace(String^ value)
{
   int nWhitespace = 0;
   for each (Char ch in value) {
      if (Char::IsWhiteSpace(ch))
         nWhitespace++;
   }
   return nWhitespace;
}
// The example displays the following output:
//    The string 'This is a test string.' consists of:
//    22 characters
//    17 letters
//    4 white-space characters

Uwagi

Uwaga

Ten interfejs API nie jest zgodny ze specyfikacją CLS. Alternatywą zgodną ze specyfikacją CLS jest Console.WriteLine(String, Object[]). Kompilatory języka C# i Visual Basic automatycznie rozpoznają wywołanie tej metody jako wywołanie metody Console.WriteLine(String, Object[]).

Ta metoda używa funkcji formatowania złożonego platformy .NET, aby przekonwertować wartość obiektu na jego reprezentację tekstową i osadzić tę reprezentację w ciągu. Wynikowy ciąg jest zapisywany do strumienia wyjściowego.

Parametr format składa się z zera lub większej liczby przebiegów tekstu zmieszanego z zero lub większą większa liczba indeksowanych symboli zastępczych, nazywanych elementami formatu, które odpowiadają obiektowi na liście parametrów tej metody. Proces formatowania zastępuje każdy element formatu tekstową reprezentacja wartości odpowiedniego obiektu.

Składnia elementu formatu to {index[,alignment][:formatString]}, który określa obowiązkowy indeks, opcjonalną długość i wyrównanie sformatowanego tekstu oraz opcjonalny ciąg znaków specyfikatora formatu, które określają sposób formatowania wartości odpowiedniego obiektu.

Platforma .NET zapewnia rozbudowaną obsługę formatowania, która została szczegółowo opisana w poniższych tematach formatowania.

Aby uzyskać więcej informacji na temat terminatora wiersza, zobacz sekcję WriteLine Uwagi metody, która nie przyjmuje parametrów.

Uwagi dotyczące wywoływania

Ta metoda jest oznaczona vararg słowem kluczowym, co oznacza, że obsługuje zmienną liczbę parametrów. Metodę można wywołać z języka Visual C++, ale nie można jej wywołać z poziomu języka C# ani kodu Visual Basic. Kompilatory języka C# i Visual Basic rozwiązują wywołania jako WriteLine(String, Object, Object, Object, Object) wywołania .WriteLine(String, Object[])

Zobacz też

Dotyczy