Convert.ChangeType Metoda
Definicja
Ważne
Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi.
Przeciążenia
ChangeType(Object, Type) |
Zwraca obiekt określonego typu i którego wartość jest równoważna określonemu obiektowi. |
ChangeType(Object, TypeCode) |
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi. |
ChangeType(Object, Type, IFormatProvider) |
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi. Parametr dostarcza informacje o formatowaniu specyficznym dla kultury. |
ChangeType(Object, TypeCode, IFormatProvider) |
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi. Parametr dostarcza informacje o formatowaniu specyficznym dla kultury. |
ChangeType(Object, Type)
Zwraca obiekt określonego typu i którego wartość jest równoważna określonemu obiektowi.
public:
static System::Object ^ ChangeType(System::Object ^ value, Type ^ conversionType);
public static object ChangeType (object value, Type conversionType);
public static object? ChangeType (object? value, Type conversionType);
static member ChangeType : obj * Type -> obj
Public Shared Function ChangeType (value As Object, conversionType As Type) As Object
Parametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs.
- conversionType
- Type
Typ obiektu, który będzie zwracany.
Zwraca
Obiekt, którego typ jest conversionType
i którego wartość jest równoważna value
.
-lub-
Odwołanie o wartości null (Nothing
w Visual Basic), jeśli value
jest null
i conversionType
nie jest typem wartości.
Wyjątki
Ta konwersja nie jest obsługiwana.
-lub-
value
to null
i conversionType
jest typem wartości.
-lub-
value
nie implementuje interfejsu IConvertible .
value
nie jest w formacie rozpoznawanym przez conversionType
element .
value
reprezentuje liczbę, która jest poza zakresem conversionType
.
conversionType
to null
.
Przykłady
Poniższy przykład ilustruje użycie ChangeType metody .
using namespace System;
int main()
{
Double d = -2.345;
int i = *safe_cast<Int32^>(Convert::ChangeType( d, int::typeid ));
Console::WriteLine( "The double value {0} when converted to an int becomes {1}", d, i );
String^ s = "12/12/98";
DateTime dt = *safe_cast<DateTime^>(Convert::ChangeType( s, DateTime::typeid ));
Console::WriteLine( "The string value {0} when converted to a Date becomes {1}", s, dt );
}
using System;
public class ChangeTypeTest {
public static void Main() {
Double d = -2.345;
int i = (int)Convert.ChangeType(d, typeof(int));
Console.WriteLine("The double value {0} when converted to an int becomes {1}", d, i);
string s = "12/12/98";
DateTime dt = (DateTime)Convert.ChangeType(s, typeof(DateTime));
Console.WriteLine("The string value {0} when converted to a Date becomes {1}", s, dt);
}
}
open System
let d = -2.345
let i = Convert.ChangeType(d, typeof<int>) :?> int
printfn $"The double value {d} when converted to an int becomes {i}"
let s = "12/12/98"
let dt = Convert.ChangeType(s, typeof<DateTime>) :?> DateTime
printfn $"The string value {s} when converted to a Date becomes {dt}"
Public Class ChangeTypeTest
Public Shared Sub Main()
Dim d As [Double] = - 2.345
Dim i As Integer = CInt(Convert.ChangeType(d, GetType(Integer)))
Console.WriteLine("The double value {0} when converted to an int becomes {1}", d, i)
Dim s As String = "12/12/98"
Dim dt As DateTime = CType(Convert.ChangeType(s, GetType(DateTime)), DateTime)
Console.WriteLine("The string value {0} when converted to a Date becomes {1}", s, dt)
End Sub
End Class
Uwagi
ChangeType to metoda konwersji ogólnego przeznaczenia, która konwertuje obiekt określony przez value
na conversionType
. Parametr value
może być obiektem dowolnego typu, a conversionType
także obiektem Type reprezentującym dowolny typ podstawowy lub niestandardowy. Aby konwersja powiodła się, musi zaimplementować IConvertible interfejs, value
ponieważ metoda po prostu zawija wywołanie odpowiedniej IConvertible metody. Metoda wymaga obsługi konwersji value
conversionType
.
Ta metoda używa kultury bieżącego wątku do konwersji.
Uwagi dotyczące wywoływania
Metoda ChangeType(Object, Type) może przekonwertować wartość wyliczenia na inny typ. Nie może jednak przekonwertować innego typu na wartość wyliczenia, nawet jeśli typ źródłowy jest bazowym typem wyliczenia. Aby przekonwertować typ na wartość wyliczenia, użyj operatora rzutowania (w języku C#) lub funkcji konwersji (w Visual Basic). Poniższy przykład ilustruje konwersję na i z wartości wyliczenia kontynentu
.
using System;
public enum Continent
{
Africa, Antarctica, Asia, Australia, Europe,
NorthAmerica, SouthAmerica
};
public class Example
{
public static void Main()
{
// Convert a Continent to a Double.
Continent cont = Continent.NorthAmerica;
Console.WriteLine("{0:N2}",
Convert.ChangeType(cont, typeof(Double)));
// Convert a Double to a Continent.
Double number = 6.0;
try {
Console.WriteLine("{0}",
Convert.ChangeType(number, typeof(Continent)));
}
catch (InvalidCastException) {
Console.WriteLine("Cannot convert a Double to a Continent");
}
Console.WriteLine("{0}", (Continent) number);
}
}
// The example displays the following output:
// 5.00
// Cannot convert a Double to a Continent
// SouthAmerica
Metoda ChangeType(Object, Type) może przekonwertować typ dopuszczalny do wartości null na inny typ. Nie może jednak przekonwertować innego typu na wartość typu dopuszczanego do wartości null, nawet jeśli conversionType
jest to typ bazowy klasy Nullable<T>. Aby wykonać konwersję, można użyć operatora rzutowania (w języku C#) lub funkcji konwersji (w Visual Basic). Poniższy przykład ilustruje konwersję na i z typu dopuszczalnego do wartości null.
using System;
public class Example
{
public static void Main()
{
int? intValue1 = 12893;
double dValue1 = (double) Convert.ChangeType(intValue1, typeof(Double));
Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
dValue1, dValue1.GetType().Name);
float fValue1 = 16.3478f;
int? intValue2 = (int) fValue1;
Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
intValue2, intValue2.GetType().Name);
}
}
// The example displays the following output:
// 12893 (Int32)--> 12893 (Double)
// 16.3478 (Single)--> 16 (Int32)
Dotyczy
ChangeType(Object, TypeCode)
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi.
public:
static System::Object ^ ChangeType(System::Object ^ value, TypeCode typeCode);
public static object? ChangeType (object? value, TypeCode typeCode);
public static object ChangeType (object value, TypeCode typeCode);
static member ChangeType : obj * TypeCode -> obj
Public Shared Function ChangeType (value As Object, typeCode As TypeCode) As Object
Parametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs.
- typeCode
- TypeCode
Typ obiektu, który będzie zwracany.
Zwraca
Obiekt, którego typ bazowy jest typeCode
i którego wartość jest równoważna value
.
-lub-
Odwołanie o wartości null (Nothing
w Visual Basic), jeśli value
jest i typeCode
ma null
Emptywartość , Stringlub Object.
Wyjątki
Ta konwersja nie jest obsługiwana.
-lub-
value
to null
i typeCode
określa typ wartości.
-lub-
value
nie implementuje interfejsu IConvertible .
value
nie jest w formacie rozpoznawanym przez typeCode
typ.
value
reprezentuje liczbę, która jest poza zakresem typeCode
typu.
typeCode
jest nieprawidłowy.
Przykłady
W poniższym przykładzie pokazano, jak za pomocą ChangeType(Object, TypeCode) metody zmienić Object typ na typ określony przez TypeCode parametr, jeśli to możliwe.
using namespace System;
void main()
{
Double d = -2.345;
int i = (int) Convert::ChangeType(d, TypeCode::Int32);
Console::WriteLine("The Double {0} when converted to an Int32 is {1}", d, i);
String^ s = "12/12/2009";
DateTime dt = (DateTime)Convert::ChangeType(s, DateTime::typeid);
Console::WriteLine("The String {0} when converted to a Date is {1}", s, dt);
}
// The example displays the following output:
// The Double -2.345 when converted to an Int32 is -2
// The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM
using System;
public class ChangeTypeTest {
public static void Main() {
Double d = -2.345;
int i = (int)Convert.ChangeType(d, TypeCode.Int32);
Console.WriteLine("The Double {0} when converted to an Int32 is {1}", d, i);
string s = "12/12/2009";
DateTime dt = (DateTime)Convert.ChangeType(s, typeof(DateTime));
Console.WriteLine("The String {0} when converted to a Date is {1}", s, dt);
}
}
// The example displays the following output:
// The Double -2.345 when converted to an Int32 is -2
// The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM
open System
let d = -2.345
let i = Convert.ChangeType(d, TypeCode.Int32) :?> int
printfn $"The Double {d} when converted to an Int32 is {i}"
let s = "12/12/2009"
let dt = Convert.ChangeType(s, typeof<DateTime>) :?> DateTime
printfn $"The String {s} when converted to a Date is {dt}"
// The example displays the following output:
// The Double -2.345 when converted to an Int32 is -2
// The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM
Public Class ChangeTypeTest
Public Shared Sub Main()
Dim d As [Double] = - 2.345
Dim i As Integer = CInt(Convert.ChangeType(d, TypeCode.Int32))
Console.WriteLine("The Double {0} when converted to an Int32 is {1}", d, i)
Dim s As String = "12/12/2009"
Dim dt As DateTime = CDate(Convert.ChangeType(s, TypeCode.DateTime))
Console.WriteLine("The String {0} when converted to a Date is {1}", s, dt)
End Sub
End Class
' The example displays the following output:
' The Double -2.345 when converted to an Int32 is -2
' The String 12/12/2009 when converted to a Date is 12/12/2009 12:00:00 AM
Uwagi
ChangeType(Object, TypeCode) jest metodą konwersji ogólnego przeznaczenia, która konwertuje obiekt określony przez value
na wstępnie zdefiniowany typ określony przez typeCode
. Parametr value
może być obiektem dowolnego typu. Aby konwersja powiodła się, musi zaimplementować IConvertible interfejs, value
ponieważ metoda po prostu opakowuje wywołanie odpowiedniej IConvertible metody. Metoda wymaga również obsługi konwersji value
typeCode
.
Metoda ChangeType(Object, TypeCode) nie obsługuje konwersji value
na typ niestandardowy. Aby wykonać taką konwersję, wywołaj metodę ChangeType(Object, Type) .
Dotyczy
ChangeType(Object, Type, IFormatProvider)
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi. Parametr dostarcza informacje o formatowaniu specyficznym dla kultury.
public:
static System::Object ^ ChangeType(System::Object ^ value, Type ^ conversionType, IFormatProvider ^ provider);
public static object ChangeType (object value, Type conversionType, IFormatProvider provider);
public static object? ChangeType (object? value, Type conversionType, IFormatProvider? provider);
static member ChangeType : obj * Type * IFormatProvider -> obj
Public Shared Function ChangeType (value As Object, conversionType As Type, provider As IFormatProvider) As Object
Parametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs.
- conversionType
- Type
Typ obiektu, który będzie zwracany.
- provider
- IFormatProvider
Obiekt, który dostarcza informacje o formatowaniu specyficzne dla kultury.
Zwraca
Obiekt, którego typ jest conversionType
i którego wartość jest równoważna value
.
-lub-
value
, jeśli wartości Type i value
conversionType
są równe.
-lub-
Odwołanie o wartości null (Nothing
w Visual Basic), jeśli value
jest null
i conversionType
nie jest typem wartości.
Wyjątki
Ta konwersja nie jest obsługiwana.
-lub-
value
to null
i conversionType
jest typem wartości.
-lub-
value
nie implementuje interfejsu IConvertible .
value
nie jest w formacie conversionType
rozpoznawanym przez provider
element .
value
reprezentuje liczbę, która jest poza zakresem conversionType
.
conversionType
to null
.
Przykłady
W poniższym przykładzie zdefiniowano klasę Temperature
, która implementuje IConvertible interfejs.
using namespace System;
using namespace System::Globalization;
public ref class Temperature : IConvertible
{
private:
Decimal m_Temp;
public:
Temperature(Decimal temperature)
{
m_Temp = temperature;
}
property Decimal Celsius {
Decimal get() { return m_Temp; }
}
property Decimal Kelvin {
Decimal get() { return m_Temp + (Decimal) 273.15; }
}
property Decimal Fahrenheit {
Decimal get() { return Math::Round((Decimal) (m_Temp * 9 / 5 + 32), 2); }
}
virtual String^ ToString()
override {
return m_Temp.ToString("N2") + "�C";
}
// IConvertible implementations.
virtual TypeCode GetTypeCode()
{
return TypeCode::Object;
}
virtual bool ToBoolean(IFormatProvider^ provider)
{
if (m_Temp == 0)
return false;
else
return true;
}
virtual Byte ToByte(IFormatProvider^ provider)
{
if (m_Temp < Byte::MinValue || m_Temp > Byte::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the Byte type.",
m_Temp));
else
return Decimal::ToByte(m_Temp);
}
virtual Char ToChar(IFormatProvider^ provider)
{
throw gcnew InvalidCastException("Temperature to Char conversion is not supported.");
}
virtual DateTime ToDateTime(IFormatProvider^ provider)
{
throw gcnew InvalidCastException("Temperature to DateTime conversion is not supported.");
}
virtual Decimal ToDecimal(IFormatProvider^ provider)
{
return m_Temp;
}
virtual Double ToDouble(IFormatProvider^ provider)
{
return Decimal::ToDouble(m_Temp);
}
virtual Int16 ToInt16(IFormatProvider^ provider)
{
if (m_Temp < Int16::MinValue || m_Temp > Int16::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the Int16 type.",
m_Temp));
else
return Decimal::ToInt16(m_Temp);
}
virtual Int32 ToInt32(IFormatProvider^ provider)
{
if (m_Temp < Int32::MinValue || m_Temp > Int32::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the Int32 type.",
m_Temp));
else
return Decimal::ToInt32(m_Temp);
}
virtual Int64 ToInt64(IFormatProvider^ provider)
{
if (m_Temp < Int64::MinValue || m_Temp > Int64::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the Int64 type.",
m_Temp));
else
return Decimal::ToInt64(m_Temp);
}
virtual SByte ToSByte(IFormatProvider^ provider)
{
if (m_Temp < SByte::MinValue || m_Temp > SByte::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the SByte type.",
m_Temp));
else
return Decimal::ToSByte(m_Temp);
}
virtual Single ToSingle(IFormatProvider^ provider)
{
return Decimal::ToSingle(m_Temp);
}
virtual String^ ToString(IFormatProvider^ provider)
{
return m_Temp.ToString("N2", provider) + "�C";
}
virtual Object^ ToType(Type^ conversionType, IFormatProvider^ provider)
{
switch (Type::GetTypeCode(conversionType))
{
case TypeCode::Boolean:
return ToBoolean(nullptr);
case TypeCode::Byte:
return ToByte(nullptr);
case TypeCode::Char:
return ToChar(nullptr);
case TypeCode::DateTime:
return ToDateTime(nullptr);
case TypeCode::Decimal:
return ToDecimal(nullptr);
case TypeCode::Double:
return ToDouble(nullptr);
case TypeCode::Int16:
return ToInt16(nullptr);
case TypeCode::Int32:
return ToInt32(nullptr);
case TypeCode::Int64:
return ToInt64(nullptr);
case TypeCode::Object:
if (Temperature::typeid->Equals(conversionType))
return this;
else
throw gcnew InvalidCastException(String::Format("Conversion to a {0} is not supported.",
conversionType->Name));
case TypeCode::SByte:
return ToSByte(nullptr);
case TypeCode::Single:
return ToSingle(nullptr);
case TypeCode::String:
return ToString(provider);
case TypeCode::UInt16:
return ToUInt16(nullptr);
case TypeCode::UInt32:
return ToUInt32(nullptr);
case TypeCode::UInt64:
return ToUInt64(nullptr);
default:
throw gcnew InvalidCastException(String::Format("Conversion to {0} is not supported.", conversionType->Name));
}
}
virtual UInt16 ToUInt16(IFormatProvider^ provider)
{
if (m_Temp < UInt16::MinValue || m_Temp > UInt16::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the UInt16 type.",
m_Temp));
else
return Decimal::ToUInt16(m_Temp);
}
virtual UInt32 ToUInt32(IFormatProvider^ provider)
{
if (m_Temp < UInt32::MinValue || m_Temp > UInt32::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the UInt32 type.",
m_Temp));
else
return Decimal::ToUInt32(m_Temp);
}
virtual UInt64 ToUInt64(IFormatProvider^ provider)
{
if (m_Temp < UInt64::MinValue || m_Temp > UInt64::MaxValue)
throw gcnew OverflowException(String::Format("{0} is out of range of the UInt64 type.",
m_Temp));
else
return Decimal::ToUInt64(m_Temp);
}
};
using System;
using System.Globalization;
public class Temperature : IConvertible
{
private decimal m_Temp;
public Temperature(decimal temperature)
{
this.m_Temp = temperature;
}
public decimal Celsius
{
get { return this.m_Temp; }
}
public decimal Kelvin
{
get { return this.m_Temp + 273.15m; }
}
public decimal Fahrenheit
{
get { return Math.Round((decimal) (this.m_Temp * 9 / 5 + 32), 2); }
}
public override string ToString()
{
return m_Temp.ToString("N2") + "°C";
}
// IConvertible implementations.
public TypeCode GetTypeCode()
{
return TypeCode.Object;
}
public bool ToBoolean(IFormatProvider provider)
{
if (m_Temp == 0)
return false;
else
return true;
}
public byte ToByte(IFormatProvider provider)
{
if (m_Temp < Byte.MinValue || m_Temp > Byte.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the Byte type.",
this.m_Temp));
else
return Decimal.ToByte(this.m_Temp);
}
public char ToChar(IFormatProvider provider)
{
throw new InvalidCastException("Temperature to Char conversion is not supported.");
}
public DateTime ToDateTime(IFormatProvider provider)
{
throw new InvalidCastException("Temperature to DateTime conversion is not supported.");
}
public decimal ToDecimal(IFormatProvider provider)
{
return this.m_Temp;
}
public double ToDouble(IFormatProvider provider)
{
return Decimal.ToDouble(this.m_Temp);
}
public short ToInt16(IFormatProvider provider)
{
if (this.m_Temp < Int16.MinValue || this.m_Temp > Int16.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the Int16 type.",
this.m_Temp));
else
return Decimal.ToInt16(this.m_Temp);
}
public int ToInt32(IFormatProvider provider)
{
if (this.m_Temp < Int32.MinValue || this.m_Temp > Int32.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the Int32 type.",
this.m_Temp));
else
return Decimal.ToInt32(this.m_Temp);
}
public long ToInt64(IFormatProvider provider)
{
if (this.m_Temp < Int64.MinValue || this.m_Temp > Int64.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the Int64 type.",
this.m_Temp));
else
return Decimal.ToInt64(this.m_Temp);
}
public sbyte ToSByte(IFormatProvider provider)
{
if (this.m_Temp < SByte.MinValue || this.m_Temp > SByte.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the SByte type.",
this.m_Temp));
else
return Decimal.ToSByte(this.m_Temp);
}
public float ToSingle(IFormatProvider provider)
{
return Decimal.ToSingle(this.m_Temp);
}
public string ToString(IFormatProvider provider)
{
return m_Temp.ToString("N2", provider) + "°C";
}
public object ToType(Type conversionType, IFormatProvider provider)
{
switch (Type.GetTypeCode(conversionType))
{
case TypeCode.Boolean:
return this.ToBoolean(null);
case TypeCode.Byte:
return this.ToByte(null);
case TypeCode.Char:
return this.ToChar(null);
case TypeCode.DateTime:
return this.ToDateTime(null);
case TypeCode.Decimal:
return this.ToDecimal(null);
case TypeCode.Double:
return this.ToDouble(null);
case TypeCode.Int16:
return this.ToInt16(null);
case TypeCode.Int32:
return this.ToInt32(null);
case TypeCode.Int64:
return this.ToInt64(null);
case TypeCode.Object:
if (typeof(Temperature).Equals(conversionType))
return this;
else
throw new InvalidCastException(String.Format("Conversion to a {0} is not supported.",
conversionType.Name));
case TypeCode.SByte:
return this.ToSByte(null);
case TypeCode.Single:
return this.ToSingle(null);
case TypeCode.String:
return this.ToString(provider);
case TypeCode.UInt16:
return this.ToUInt16(null);
case TypeCode.UInt32:
return this.ToUInt32(null);
case TypeCode.UInt64:
return this.ToUInt64(null);
default:
throw new InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name));
}
}
public ushort ToUInt16(IFormatProvider provider)
{
if (this.m_Temp < UInt16.MinValue || this.m_Temp > UInt16.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the UInt16 type.",
this.m_Temp));
else
return Decimal.ToUInt16(this.m_Temp);
}
public uint ToUInt32(IFormatProvider provider)
{
if (this.m_Temp < UInt32.MinValue || this.m_Temp > UInt32.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the UInt32 type.",
this.m_Temp));
else
return Decimal.ToUInt32(this.m_Temp);
}
public ulong ToUInt64(IFormatProvider provider)
{
if (this.m_Temp < UInt64.MinValue || this.m_Temp > UInt64.MaxValue)
throw new OverflowException(String.Format("{0} is out of range of the UInt64 type.",
this.m_Temp));
else
return Decimal.ToUInt64(this.m_Temp);
}
}
open System
open System.Globalization
type Temperature(temperature: decimal) =
member _.Celsius = temperature
member _.Kelvin =
temperature + 273.15m
member _.Fahrenheit =
Math.Round(decimal (temperature * 9m / 5m + 32m), 2)
override _.ToString() =
temperature.ToString "N2" + "°C"
// IConvertible implementations.
interface IConvertible with
member _.GetTypeCode() =
TypeCode.Object
member _.ToBoolean(provider: IFormatProvider) =
temperature <> 0M
member _.ToByte(provider: IFormatProvider) =
if temperature < decimal Byte.MinValue || temperature > decimal Byte.MaxValue then
raise (OverflowException $"{temperature} is out of range of the Byte type.")
else
Decimal.ToByte temperature
member _.ToChar(provider: IFormatProvider) =
raise (InvalidCastException "Temperature to Char conversion is not supported.")
member _.ToDateTime(provider: IFormatProvider) =
raise (InvalidCastException "Temperature to DateTime conversion is not supported.")
member _.ToDecimal(provider: IFormatProvider) =
temperature
member _.ToDouble(provider: IFormatProvider) =
Decimal.ToDouble temperature
member _.ToInt16(provider: IFormatProvider) =
if temperature < decimal Int16.MinValue || temperature > decimal Int16.MaxValue then
raise (OverflowException $"{temperature} is out of range of the Int16 type.")
else
Decimal.ToInt16 temperature
member _.ToInt32(provider: IFormatProvider) =
if temperature < decimal Int32.MinValue || temperature > decimal Int32.MaxValue then
raise (OverflowException $"{temperature} is out of range of the Int32 type.")
else
Decimal.ToInt32 temperature
member _.ToInt64(provider: IFormatProvider) =
if temperature < decimal Int64.MinValue || temperature > decimal Int64.MaxValue then
raise (OverflowException $"{temperature} is out of range of the Int64 type.")
else
Decimal.ToInt64 temperature
member _.ToSByte(provider: IFormatProvider) =
if temperature < decimal SByte.MinValue || temperature > decimal SByte.MaxValue then
raise (OverflowException $"{temperature} is out of range of the SByte type.")
else
Decimal.ToSByte temperature
member _.ToSingle(provider: IFormatProvider) =
Decimal.ToSingle temperature
member _.ToString(provider: IFormatProvider) =
temperature.ToString("N2", provider) + "°C"
member this.ToType(conversionType: Type, provider: IFormatProvider) =
let this = this :> IConvertible
match Type.GetTypeCode conversionType with
| TypeCode.Boolean->
this.ToBoolean null
| TypeCode.Byte ->
this.ToByte null
| TypeCode.Char ->
this.ToChar null
| TypeCode.DateTime ->
this.ToDateTime null
| TypeCode.Decimal ->
this.ToDecimal null
| TypeCode.Double ->
this.ToDouble null
| TypeCode.Int16 ->
this.ToInt16 null
| TypeCode.Int32 ->
this.ToInt32 null
| TypeCode.Int64 ->
this.ToInt64 null
| TypeCode.Object ->
if typeof<Temperature>.Equals conversionType then
this
else
raise (InvalidCastException $"Conversion to a {conversionType.Name} is not supported.")
| TypeCode.SByte ->
this.ToSByte null
| TypeCode.Single ->
this.ToSingle null
| TypeCode.String ->
this.ToString provider
| TypeCode.UInt16 ->
this.ToUInt16 null
| TypeCode.UInt32->
this.ToUInt32 null
| TypeCode.UInt64->
this.ToUInt64 null
| _ ->
raise (InvalidCastException $"Conversion to {conversionType.Name} is not supported.")
member _.ToUInt16(provider: IFormatProvider) =
if temperature < decimal UInt16.MinValue || temperature > decimal UInt16.MaxValue then
raise (OverflowException $"{temperature} is out of range of the UInt16 type.")
else
Decimal.ToUInt16 temperature
member _.ToUInt32(provider: IFormatProvider) =
if temperature < decimal UInt32.MinValue || temperature > decimal UInt32.MaxValue then
raise (OverflowException $"{temperature} is out of range of the UInt32 type.")
else
Decimal.ToUInt32 temperature
member _.ToUInt64(provider: IFormatProvider) =
if temperature < decimal UInt64.MinValue || temperature > decimal UInt64.MaxValue then
raise (OverflowException $"{temperature} is out of range of the UInt64 type.")
else
Decimal.ToUInt64 temperature
Imports System.Globalization
Public Class Temperature : Implements IConvertible
Private m_Temp As Decimal
Public Sub New(temperature As Decimal)
Me.m_Temp = temperature
End Sub
Public ReadOnly Property Celsius() As Decimal
Get
Return Me.m_Temp
End Get
End Property
Public ReadOnly Property Kelvin() As Decimal
Get
Return Me.m_Temp + 273.15d
End Get
End Property
Public ReadOnly Property Fahrenheit() As Decimal
Get
Return Math.Round(CDec(Me.m_Temp * 9 / 5 + 32), 2)
End Get
End Property
Public Overrides Function ToString() As String
Return m_Temp.ToString("N2") & "°C"
End Function
' IConvertible implementations.
Public Function GetTypeCode() As TypeCode _
Implements IConvertible.GetTypeCode
Return TypeCode.Object
End Function
Public Function ToBoolean(provider As IFormatProvider) As Boolean _
Implements IConvertible.ToBoolean
If m_Temp = 0 Then
Return False
Else
Return True
End If
End Function
Public Function ToByte(provider As IFormatProvider) As Byte _
Implements IConvertible.ToByte
If m_Temp < Byte.MinValue Or m_Temp > Byte.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", _
Me.m_Temp))
Else
Return Decimal.ToByte(Me.m_Temp)
End If
End Function
Public Function ToChar(provider As IFormatProvider) As Char _
Implements IConvertible.ToChar
Throw New InvalidCastException("Temperature to Char conversion is not supported.")
End Function
Public Function ToDateTime(provider As IFormatProvider) As Date _
Implements IConvertible.ToDateTime
Throw New InvalidCastException("Temperature to DateTime conversion is not supported.")
End Function
Public Function ToDecimal(provider As IFormatProvider) As Decimal _
Implements IConvertible.ToDecimal
Return Me.m_Temp
End Function
Public Function ToDouble(provider As IFormatProvider) As Double _
Implements IConvertible.ToDouble
Return Decimal.ToDouble(Me.m_Temp)
End Function
Public Function ToInt16(provider As IFormatProvider) As Int16 _
Implements IConvertible.ToInt16
If Me.m_Temp < Int16.MinValue Or Me.m_Temp > Int16.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the Int16 type.", _
Me.m_Temp))
Else
Return Decimal.ToInt16(Me.m_Temp)
End If
End Function
Public Function ToInt32(provider As IFormatProvider) As Int32 _
Implements IConvertible.ToInt32
If Me.m_Temp < Int32.MinValue Or Me.m_Temp > Int32.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the Int32 type.", _
Me.m_Temp))
Else
Return Decimal.ToInt32(Me.m_Temp)
End If
End Function
Public Function ToInt64(provider As IFormatProvider) As Int64 _
Implements IConvertible.ToInt64
If Me.m_Temp < Int64.MinValue Or Me.m_Temp > Int64.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the Int64 type.", _
Me.m_Temp))
Else
Return Decimal.ToInt64(Me.m_Temp)
End If
End Function
Public Function ToSByte(provider As IFormatProvider) As SByte _
Implements IConvertible.ToSByte
If Me.m_Temp < SByte.MinValue Or Me.m_Temp > SByte.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the SByte type.", _
Me.m_Temp))
Else
Return Decimal.ToSByte(Me.m_Temp)
End If
End Function
Public Function ToSingle(provider As IFormatProvider) As Single _
Implements IConvertible.ToSingle
Return Decimal.ToSingle(Me.m_Temp)
End Function
Public Overloads Function ToString(provider As IFormatProvider) As String _
Implements IConvertible.ToString
Return m_Temp.ToString("N2", provider) & "°C"
End Function
Public Function ToType(conversionType As Type, provider As IFormatProvider) As Object _
Implements IConvertible.ToType
Select Case Type.GetTypeCode(conversionType)
Case TypeCode.Boolean
Return Me.ToBoolean(Nothing)
Case TypeCode.Byte
Return Me.ToByte(Nothing)
Case TypeCode.Char
Return Me.ToChar(Nothing)
Case TypeCode.DateTime
Return Me.ToDateTime(Nothing)
Case TypeCode.Decimal
Return Me.ToDecimal(Nothing)
Case TypeCode.Double
Return Me.ToDouble(Nothing)
Case TypeCode.Int16
Return Me.ToInt16(Nothing)
Case TypeCode.Int32
Return Me.ToInt32(Nothing)
Case TypeCode.Int64
Return Me.ToInt64(Nothing)
Case TypeCode.Object
If GetType(Temperature).Equals(conversionType) Then
Return Me
Else
Throw New InvalidCastException(String.Format("Conversion to a {0} is not supported.", _
conversionType.Name))
End If
Case TypeCode.SByte
Return Me.ToSByte(Nothing)
Case TypeCode.Single
Return Me.ToSingle(Nothing)
Case TypeCode.String
Return Me.ToString(provider)
Case TypeCode.UInt16
Return Me.ToUInt16(Nothing)
Case TypeCode.UInt32
Return Me.ToUInt32(Nothing)
Case TypeCode.UInt64
Return Me.ToUInt64(Nothing)
Case Else
Throw New InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name))
End Select
End Function
Public Function ToUInt16(provider As IFormatProvider) As UInt16 _
Implements IConvertible.ToUInt16
If Me.m_Temp < UInt16.MinValue Or Me.m_Temp > UInt16.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the UInt16 type.", _
Me.m_Temp))
Else
Return Decimal.ToUInt16(Me.m_Temp)
End If
End Function
Public Function ToUInt32(provider As IFormatProvider) As UInt32 _
Implements IConvertible.ToUInt32
If Me.m_Temp < UInt32.MinValue Or Me.m_Temp > UInt32.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the UInt32 type.", _
Me.m_Temp))
Else
Return Decimal.ToUInt32(Me.m_Temp)
End If
End Function
Public Function ToUInt64(provider As IFormatProvider) As UInt64 _
Implements IConvertible.ToUInt64
If Me.m_Temp < UInt64.MinValue Or Me.m_Temp > UInt64.MaxValue Then
Throw New OverflowException(String.Format("{0} is out of range of the UInt64 type.", _
Me.m_Temp))
Else
Return Decimal.ToUInt64(Me.m_temp)
End If
End Function
End Class
Poniższy przykład tworzy wystąpienie Temperature
klasy i wywołuje ChangeType(Object, Type, IFormatProvider) metodę , aby przekonwertować ją na podstawowe typy liczbowe obsługiwane przez platformę String.NET i na . Ilustruje to, że ChangeType metoda opakowuje wywołanie implementacji typu źródłowego IConvertible .
void main()
{
Temperature^ cool = gcnew Temperature(5);
array<Type^>^ targetTypes = gcnew array<Type^> { SByte::typeid, Int16::typeid, Int32::typeid,
Int64::typeid, Byte::typeid, UInt16::typeid,
UInt32::typeid, UInt64::typeid, Decimal::typeid,
Single::typeid, Double::typeid, String::typeid };
CultureInfo^ provider = gcnew CultureInfo("fr-FR");
for each (Type^ targetType in targetTypes)
{
try {
Object^ value = Convert::ChangeType(cool, targetType, provider);
Console::WriteLine("Converted {0} {1} to {2} {3}.",
cool->GetType()->Name, cool->ToString(),
targetType->Name, value);
}
catch (InvalidCastException^) {
Console::WriteLine("Unsupported {0} --> {1} conversion.",
cool->GetType()->Name, targetType->Name);
}
catch (OverflowException^) {
Console::WriteLine("{0} is out of range of the {1} type.",
cool, targetType->Name);
}
}
}
// The example dosplays the following output:
// Converted Temperature 5.00�C to SByte 5.
// Converted Temperature 5.00�C to Int16 5.
// Converted Temperature 5.00�C to Int32 5.
// Converted Temperature 5.00�C to Int64 5.
// Converted Temperature 5.00�C to Byte 5.
// Converted Temperature 5.00�C to UInt16 5.
// Converted Temperature 5.00�C to UInt32 5.
// Converted Temperature 5.00�C to UInt64 5.
// Converted Temperature 5.00�C to Decimal 5.
// Converted Temperature 5.00�C to Single 5.
// Converted Temperature 5.00�C to Double 5.
// Converted Temperature 5.00�C to String 5,00�C.
public class Example
{
public static void Main()
{
Temperature cool = new Temperature(5);
Type[] targetTypes = { typeof(SByte), typeof(Int16), typeof(Int32),
typeof(Int64), typeof(Byte), typeof(UInt16),
typeof(UInt32), typeof(UInt64), typeof(Decimal),
typeof(Single), typeof(Double), typeof(String) };
CultureInfo provider = new CultureInfo("fr-FR");
foreach (Type targetType in targetTypes)
{
try {
object value = Convert.ChangeType(cool, targetType, provider);
Console.WriteLine("Converted {0} {1} to {2} {3}.",
cool.GetType().Name, cool.ToString(),
targetType.Name, value);
}
catch (InvalidCastException) {
Console.WriteLine("Unsupported {0} --> {1} conversion.",
cool.GetType().Name, targetType.Name);
}
catch (OverflowException) {
Console.WriteLine("{0} is out of range of the {1} type.",
cool, targetType.Name);
}
}
}
}
// The example dosplays the following output:
// Converted Temperature 5.00°C to SByte 5.
// Converted Temperature 5.00°C to Int16 5.
// Converted Temperature 5.00°C to Int32 5.
// Converted Temperature 5.00°C to Int64 5.
// Converted Temperature 5.00°C to Byte 5.
// Converted Temperature 5.00°C to UInt16 5.
// Converted Temperature 5.00°C to UInt32 5.
// Converted Temperature 5.00°C to UInt64 5.
// Converted Temperature 5.00°C to Decimal 5.
// Converted Temperature 5.00°C to Single 5.
// Converted Temperature 5.00°C to Double 5.
// Converted Temperature 5.00°C to String 5,00°C.
let cool = Temperature 5
let targetTypes =
[ typeof<SByte>; typeof<Int16>; typeof<Int32>
typeof<Int64>; typeof<Byte>; typeof<UInt16>
typeof<UInt32>; typeof<UInt64>; typeof<Decimal>;
typeof<Single>; typeof<Double>; typeof<String>; ]
let provider = CultureInfo "fr-FR"
for targetType in targetTypes do
try
let value = Convert.ChangeType(cool, targetType, provider)
printfn $"Converted {cool.GetType().Name} {cool} to {targetType.Name} {value}."
with
| :? InvalidCastException ->
printfn $"Unsupported {cool.GetType().Name} --> {targetType.Name} conversion."
| :? OverflowException ->
printfn $"{cool} is out of range of the {targetType.Name} type."
// The example dosplays the following output:
// Converted Temperature 5.00°C to SByte 5.
// Converted Temperature 5.00°C to Int16 5.
// Converted Temperature 5.00°C to Int32 5.
// Converted Temperature 5.00°C to Int64 5.
// Converted Temperature 5.00°C to Byte 5.
// Converted Temperature 5.00°C to UInt16 5.
// Converted Temperature 5.00°C to UInt32 5.
// Converted Temperature 5.00°C to UInt64 5.
// Converted Temperature 5.00°C to Decimal 5.
// Converted Temperature 5.00°C to Single 5.
// Converted Temperature 5.00°C to Double 5.
// Converted Temperature 5.00°C to String 5,00°C.
Module Example
Public Sub Main()
Dim cool As New Temperature(5)
Dim targetTypes() As Type = { GetType(SByte), GetType(Int16), GetType(Int32), _
GetType(Int64), GetType(Byte), GetType(UInt16), _
GetType(UInt32), GetType(UInt64), GetType(Decimal), _
GetType(Single), GetType(Double), GetType(String) }
Dim provider As New CultureInfo("fr-FR")
For Each targetType As Type In targetTypes
Try
Dim value As Object = Convert.ChangeType(cool, targetType, provider)
Console.WriteLine("Converted {0} {1} to {2} {3}.", _
cool.GetType().Name, cool.ToString(), _
targetType.Name, value)
Catch e As InvalidCastException
Console.WriteLine("Unsupported {0} --> {1} conversion.", _
cool.GetType().Name, targetType.Name)
Catch e As OverflowException
Console.WriteLine("{0} is out of range of the {1} type.", _
cool, targetType.Name)
End Try
Next
End Sub
End Module
' The example displays the following output:
' Converted Temperature 5.00°C to SByte 5.
' Converted Temperature 5.00°C to Int16 5.
' Converted Temperature 5.00°C to Int32 5.
' Converted Temperature 5.00°C to Int64 5.
' Converted Temperature 5.00°C to Byte 5.
' Converted Temperature 5.00°C to UInt16 5.
' Converted Temperature 5.00°C to UInt32 5.
' Converted Temperature 5.00°C to UInt64 5.
' Converted Temperature 5.00°C to Decimal 5.
' Converted Temperature 5.00°C to Single 5.
' Converted Temperature 5.00°C to Double 5.
' Converted Temperature 5.00°C to String 5,00°C.
Uwagi
ChangeType to metoda konwersji ogólnego przeznaczenia, która konwertuje obiekt określony przez value
na conversionType
. Parametr value
może być obiektem dowolnego typu i conversionType
może być również obiektem Type reprezentującym dowolny typ podstawowy lub niestandardowy. Aby konwersja powiodła się, musi zaimplementować IConvertible interfejs, value
ponieważ metoda po prostu opakowuje wywołanie odpowiedniej IConvertible metody. Metoda wymaga obsługi konwersji value
conversionType
.
Parametr provider
jest implementacją IFormatProvider , która dostarcza informacje o formatowaniu konwersji. Określa, czy ten parametr jest używany, zależy od podstawowej IConvertible implementacji. Jeśli value
jest podstawowym typem danych, provider
jest używany tylko dla następujących konwersji:
Konwersja z liczby na ciąg lub z ciągu na liczbę.
provider
musi być obiektem CultureInfo , obiektem NumberFormatInfo lub implementacją niestandardową IFormatProvider zwracającą NumberFormatInfo obiekt. Jednak ponieważ ChangeType(Object, TypeCode, IFormatProvider) metoda wykonuje konwersję przy użyciu domyślnego specyfikatora formatu "G",provider
parametr nie ma wpływu, jeślivalue
lub typ docelowy jest niepodpisaną liczbą całkowitą. Jeśliprovider
parametr manull
wartość , CultureInfo używany jest obiekt reprezentujący bieżącą kulturę.Konwersja z DateTime wartości na ciąg lub z ciągu na DateTime wartość.
provider
musi być obiektem CultureInfo lub DateTimeFormatInfo . Jeśliprovider
parametr manull
wartość , CultureInfo używany jest obiekt reprezentujący bieżącą kulturę.
Jeśli value
jest typem zdefiniowanym przez aplikację, jego IConvertible implementacja może używać parametru provider
.
Uwagi dotyczące wywoływania
Metoda ChangeType(Object, Type, IFormatProvider) może przekonwertować wartość wyliczenia na inny typ. Nie może jednak przekonwertować innego typu na wartość wyliczenia, nawet jeśli typ źródłowy jest bazowym typem wyliczenia. Aby przekonwertować typ na wartość wyliczenia, użyj operatora rzutowania (w języku C#) lub funkcji konwersji (w Visual Basic). Poniższy przykład ilustruje konwersję na i z wartości wyliczenia kontynentu
.
using System;
public enum Continent
{
Africa, Antarctica, Asia, Australia, Europe,
NorthAmerica, SouthAmerica
};
public class Example
{
public static void Main()
{
// Convert a Continent to a Double.
Continent cont = Continent.NorthAmerica;
Console.WriteLine("{0:N2}",
Convert.ChangeType(cont, typeof(Double)));
// Convert a Double to a Continent.
Double number = 6.0;
try {
Console.WriteLine("{0}",
Convert.ChangeType(number, typeof(Continent)));
}
catch (InvalidCastException) {
Console.WriteLine("Cannot convert a Double to a Continent");
}
Console.WriteLine("{0}", (Continent) number);
}
}
// The example displays the following output:
// 5.00
// Cannot convert a Double to a Continent
// SouthAmerica
Metoda ChangeType(Object, Type, IFormatProvider) może przekonwertować typ dopuszczalny do wartości null na inny typ. Nie może jednak przekonwertować innego typu na wartość typu dopuszczanego do wartości null, nawet jeśli conversionType
jest to typ bazowy klasy Nullable<T>. Aby wykonać konwersję, można użyć operatora rzutowania (w języku C#) lub funkcji konwersji (w Visual Basic). Poniższy przykład ilustruje konwersję na i z typu dopuszczalnego do wartości null.
using System;
public class Example
{
public static void Main()
{
int? intValue1 = 12893;
double dValue1 = (double) Convert.ChangeType(intValue1, typeof(Double), null);
Console.WriteLine("{0} ({1})--> {2} ({3})", intValue1, intValue1.GetType().Name,
dValue1, dValue1.GetType().Name);
float fValue1 = 16.3478f;
int? intValue2 = (int) fValue1;
Console.WriteLine("{0} ({1})--> {2} ({3})", fValue1, fValue1.GetType().Name,
intValue2, intValue2.GetType().Name);
}
}
// The example displays the following output:
// 12893 (Int32)--> 12893 (Double)
// 16.3478 (Single)--> 16 (Int32)
Dotyczy
ChangeType(Object, TypeCode, IFormatProvider)
Zwraca obiekt określonego typu, którego wartość jest równoważna określonemu obiektowi. Parametr dostarcza informacje o formatowaniu specyficznym dla kultury.
public:
static System::Object ^ ChangeType(System::Object ^ value, TypeCode typeCode, IFormatProvider ^ provider);
public static object ChangeType (object value, TypeCode typeCode, IFormatProvider provider);
public static object? ChangeType (object? value, TypeCode typeCode, IFormatProvider? provider);
static member ChangeType : obj * TypeCode * IFormatProvider -> obj
Public Shared Function ChangeType (value As Object, typeCode As TypeCode, provider As IFormatProvider) As Object
Parametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs.
- typeCode
- TypeCode
Typ obiektu, który będzie zwracany.
- provider
- IFormatProvider
Obiekt, który dostarcza informacje o formatowaniu specyficzne dla kultury.
Zwraca
Obiekt, którego typ bazowy jest typeCode
i którego wartość jest równoważna value
.
-lub-
Odwołanie o wartości null (Nothing
w Visual Basic), jeśli value
jest i typeCode
ma null
Emptywartość , Stringlub Object.
Wyjątki
Ta konwersja nie jest obsługiwana.
-lub-
value
jest i null
typeCode
określa typ wartości.
-lub-
value
nie implementuje interfejsu IConvertible .
value
nie jest w formacie typeCode
rozpoznawanym przez provider
typ .
value
reprezentuje liczbę, która jest poza zakresem typeCode
typu.
typeCode
jest nieprawidłowy.
Przykłady
Poniższy przykład definiuje niestandardowego dostawcę formatu o nazwie InterceptProvider
, który wskazuje, kiedy jego GetFormat metoda jest wywoływana i zwraca wartość NumberFormatInfo dla kultury fr-FR oraz DateTimeFormatInfo obiekt kultury en-US. Ten dostawca formatu jest używany we wszystkich wywołaniach ChangeType(Object, TypeCode, IFormatProvider) metody . W przykładzie zostanie utworzona tablica z wartością Double DateTime i i i wykonuje powtarzające się wywołania z ChangeType(Object, TypeCode, IFormatProvider) każdą wartością i każdym elementem członkowskim wyliczenia TypeCode . W przykładzie pokazano, kiedy metoda używa parametru IFormatProvider , a także ilustruje użycie parametru provider
do formatowania wrażliwego na kulturę.
using namespace System;
using namespace System::Globalization;
ref class InterceptProvider : IFormatProvider
{
public:
virtual Object^ GetFormat(Type^ formatType)
{
CultureInfo^ culture;
if (formatType == NumberFormatInfo::typeid) {
Console::WriteLine(" Returning a fr-FR numeric format provider.");
culture = gcnew CultureInfo("fr-FR");
return culture->NumberFormat;
}
else if (formatType == DateTimeFormatInfo::typeid) {
Console::WriteLine(" Returning an en-US date/time format provider.");
culture = gcnew CultureInfo("en-US");
return culture->DateTimeFormat;
}
else {
Console::WriteLine(" Requesting a format provider of {0}.", formatType->Name);
return nullptr;
}
}
};
void main()
{
array<Object^>^ values = gcnew array<Object^> { 103.5, gcnew DateTime(2010, 12, 26, 14, 34, 0) };
IFormatProvider^ provider = gcnew InterceptProvider();
// Convert value to each of the types represented in TypeCode enum.
for each (Object^ value in values)
{
// Iterate types in TypeCode enum.
for each (TypeCode enumType in (array<TypeCode>^) Enum::GetValues(TypeCode::typeid))
{
if (enumType == TypeCode::DBNull || enumType == TypeCode::Empty) continue;
try {
Console::WriteLine("{0} ({1}) --> {2} ({3}).",
value, value->GetType()->Name,
Convert::ChangeType(value, enumType, provider),
enumType.ToString());
}
catch (InvalidCastException^ e) {
Console::WriteLine("Cannot convert a {0} to a {1}",
value->GetType()->Name, enumType.ToString());
}
catch (OverflowException^ e) {
Console::WriteLine("Overflow: {0} is out of the range of a {1}",
value, enumType.ToString());
}
}
Console::WriteLine();
}
}
// The example displays the following output:
// 103.5 (Double) --> 103.5 (Object).
// 103.5 (Double) --> True (Boolean).
// Cannot convert a Double to a Char
// 103.5 (Double) --> 104 (SByte).
// 103.5 (Double) --> 104 (Byte).
// 103.5 (Double) --> 104 (Int16).
// 103.5 (Double) --> 104 (UInt16).
// 103.5 (Double) --> 104 (Int32).
// 103.5 (Double) --> 104 (UInt32).
// 103.5 (Double) --> 104 (Int64).
// 103.5 (Double) --> 104 (UInt64).
// 103.5 (Double) --> 103.5 (Single).
// 103.5 (Double) --> 103.5 (Double).
// 103.5 (Double) --> 103.5 (Decimal).
// Cannot convert a Double to a DateTime
// Returning a fr-FR numeric format provider.
// 103.5 (Double) --> 103,5 (String).
//
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
// Cannot convert a DateTime to a Boolean
// Cannot convert a DateTime to a Char
// Cannot convert a DateTime to a SByte
// Cannot convert a DateTime to a Byte
// Cannot convert a DateTime to a Int16
// Cannot convert a DateTime to a UInt16
// Cannot convert a DateTime to a Int32
// Cannot convert a DateTime to a UInt32
// Cannot convert a DateTime to a Int64
// Cannot convert a DateTime to a UInt64
// Cannot convert a DateTime to a Single
// Cannot convert a DateTime to a Double
// Cannot convert a DateTime to a Decimal
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
// Returning an en-US date/time format provider.
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).
using System;
using System.Globalization;
public class InterceptProvider : IFormatProvider
{
public object GetFormat(Type formatType)
{
if (formatType == typeof(NumberFormatInfo)) {
Console.WriteLine(" Returning a fr-FR numeric format provider.");
return new System.Globalization.CultureInfo("fr-FR").NumberFormat;
}
else if (formatType == typeof(DateTimeFormatInfo)) {
Console.WriteLine(" Returning an en-US date/time format provider.");
return new System.Globalization.CultureInfo("en-US").DateTimeFormat;
}
else {
Console.WriteLine(" Requesting a format provider of {0}.", formatType.Name);
return null;
}
}
}
public class Example
{
public static void Main()
{
object[] values = { 103.5d, new DateTime(2010, 12, 26, 14, 34, 0) };
IFormatProvider provider = new InterceptProvider();
// Convert value to each of the types represented in TypeCode enum.
foreach (object value in values)
{
// Iterate types in TypeCode enum.
foreach (TypeCode enumType in ((TypeCode[]) Enum.GetValues(typeof(TypeCode))))
{
if (enumType == TypeCode.DBNull || enumType == TypeCode.Empty) continue;
try {
Console.WriteLine("{0} ({1}) --> {2} ({3}).",
value, value.GetType().Name,
Convert.ChangeType(value, enumType, provider),
enumType.ToString());
}
catch (InvalidCastException) {
Console.WriteLine("Cannot convert a {0} to a {1}",
value.GetType().Name, enumType.ToString());
}
catch (OverflowException) {
Console.WriteLine("Overflow: {0} is out of the range of a {1}",
value, enumType.ToString());
}
}
Console.WriteLine();
}
}
}
// The example displays the following output:
// 103.5 (Double) --> 103.5 (Object).
// 103.5 (Double) --> True (Boolean).
// Cannot convert a Double to a Char
// 103.5 (Double) --> 104 (SByte).
// 103.5 (Double) --> 104 (Byte).
// 103.5 (Double) --> 104 (Int16).
// 103.5 (Double) --> 104 (UInt16).
// 103.5 (Double) --> 104 (Int32).
// 103.5 (Double) --> 104 (UInt32).
// 103.5 (Double) --> 104 (Int64).
// 103.5 (Double) --> 104 (UInt64).
// 103.5 (Double) --> 103.5 (Single).
// 103.5 (Double) --> 103.5 (Double).
// 103.5 (Double) --> 103.5 (Decimal).
// Cannot convert a Double to a DateTime
// Returning a fr-FR numeric format provider.
// 103.5 (Double) --> 103,5 (String).
//
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
// Cannot convert a DateTime to a Boolean
// Cannot convert a DateTime to a Char
// Cannot convert a DateTime to a SByte
// Cannot convert a DateTime to a Byte
// Cannot convert a DateTime to a Int16
// Cannot convert a DateTime to a UInt16
// Cannot convert a DateTime to a Int32
// Cannot convert a DateTime to a UInt32
// Cannot convert a DateTime to a Int64
// Cannot convert a DateTime to a UInt64
// Cannot convert a DateTime to a Single
// Cannot convert a DateTime to a Double
// Cannot convert a DateTime to a Decimal
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
// Returning an en-US date/time format provider.
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).
open System
open System.Globalization
type InterceptProvider() =
interface IFormatProvider with
member _.GetFormat(formatType: Type) =
if formatType = typeof<NumberFormatInfo> then
printfn " Returning a fr-FR numeric format provider."
CultureInfo("fr-FR").NumberFormat
elif formatType = typeof<DateTimeFormatInfo> then
printfn " Returning an en-US date/time format provider."
CultureInfo("en-US").DateTimeFormat
else
printfn $" Requesting a format provider of {formatType.Name}."
null
let values: obj[] = [| 103.5; DateTime(2010, 12, 26, 14, 34, 0)|]
let provider = InterceptProvider()
// Convert value to each of the types represented in TypeCode enum.
for value in values do
// Iterate types in TypeCode enum.
for enumType in Enum.GetValues typeof<TypeCode> :?> TypeCode[] do
match enumType with
| TypeCode.DBNull | TypeCode.Empty -> ()
| _ ->
try
printfn $"{value} ({value.GetType().Name}) --> {Convert.ChangeType(value, enumType, provider)} ({enumType})."
with
| :? InvalidCastException ->
printfn $"Cannot convert a {value.GetType().Name} to a {enumType}"
| :? OverflowException ->
printfn $"Overflow: {value} is out of the range of a {enumType}"
printfn ""
// The example displays the following output:
// 103.5 (Double) --> 103.5 (Object).
// 103.5 (Double) --> True (Boolean).
// Cannot convert a Double to a Char
// 103.5 (Double) --> 104 (SByte).
// 103.5 (Double) --> 104 (Byte).
// 103.5 (Double) --> 104 (Int16).
// 103.5 (Double) --> 104 (UInt16).
// 103.5 (Double) --> 104 (Int32).
// 103.5 (Double) --> 104 (UInt32).
// 103.5 (Double) --> 104 (Int64).
// 103.5 (Double) --> 104 (UInt64).
// 103.5 (Double) --> 103.5 (Single).
// 103.5 (Double) --> 103.5 (Double).
// 103.5 (Double) --> 103.5 (Decimal).
// Cannot convert a Double to a DateTime
// Returning a fr-FR numeric format provider.
// 103.5 (Double) --> 103,5 (String).
//
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
// Cannot convert a DateTime to a Boolean
// Cannot convert a DateTime to a Char
// Cannot convert a DateTime to a SByte
// Cannot convert a DateTime to a Byte
// Cannot convert a DateTime to a Int16
// Cannot convert a DateTime to a UInt16
// Cannot convert a DateTime to a Int32
// Cannot convert a DateTime to a UInt32
// Cannot convert a DateTime to a Int64
// Cannot convert a DateTime to a UInt64
// Cannot convert a DateTime to a Single
// Cannot convert a DateTime to a Double
// Cannot convert a DateTime to a Decimal
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
// Returning an en-US date/time format provider.
// 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).
Imports System.Globalization
Public Class InterceptProvider : Implements IFormatProvider
Public Function GetFormat(formatType As Type) As Object _
Implements IFormatProvider.GetFormat
If formatType.Equals(GetType(NumberFormatInfo)) Then
Console.WriteLine(" Returning a fr-FR numeric format provider.")
Return New CultureInfo("fr-FR").NumberFormat
ElseIf formatType.Equals(GetType(DateTimeFormatInfo)) Then
Console.WriteLine(" Returning an en-US date/time format provider.")
Return New CultureInfo("en-US").DateTimeFormat
Else
Console.WriteLine(" Requesting a format provider of {0}.", formatType.Name)
Return Nothing
End If
End Function
End Class
Module Example
Public Sub Main()
Dim values() As Object = { 103.5r, #12/26/2010 2:34PM# }
Dim provider As New InterceptProvider()
' Convert value to each of the types represented in TypeCode enum.
For Each value As Object In values
' Iterate types in TypeCode enum.
For Each enumType As TypeCode In DirectCast([Enum].GetValues(GetType(TypeCode)), TypeCode())
If enumType = TypeCode.DbNull Or enumType = TypeCode.Empty Then Continue For
Try
Console.WriteLine("{0} ({1}) --> {2} ({3}).", _
value, value.GetType().Name, _
Convert.ChangeType(value, enumType, provider), _
enumType.ToString())
Catch e As InvalidCastException
Console.WriteLine("Cannot convert a {0} to a {1}", _
value.GetType().Name, enumType.ToString())
Catch e As OverflowException
Console.WriteLine("Overflow: {0} is out of the range of a {1}", _
value, enumType.ToString())
End Try
Next
Console.WriteLine()
Next
End Sub
End Module
' The example displays the following output:
' 103.5 (Double) --> 103.5 (Object).
' 103.5 (Double) --> True (Boolean).
' Cannot convert a Double to a Char
' 103.5 (Double) --> 104 (SByte).
' 103.5 (Double) --> 104 (Byte).
' 103.5 (Double) --> 104 (Int16).
' 103.5 (Double) --> 104 (UInt16).
' 103.5 (Double) --> 104 (Int32).
' 103.5 (Double) --> 104 (UInt32).
' 103.5 (Double) --> 104 (Int64).
' 103.5 (Double) --> 104 (UInt64).
' 103.5 (Double) --> 103.5 (Single).
' 103.5 (Double) --> 103.5 (Double).
' 103.5 (Double) --> 103.5 (Decimal).
' Cannot convert a Double to a DateTime
' Returning a fr-FR numeric format provider.
' 103.5 (Double) --> 103,5 (String).
'
' 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (Object).
' Cannot convert a DateTime to a Boolean
' Cannot convert a DateTime to a Char
' Cannot convert a DateTime to a SByte
' Cannot convert a DateTime to a Byte
' Cannot convert a DateTime to a Int16
' Cannot convert a DateTime to a UInt16
' Cannot convert a DateTime to a Int32
' Cannot convert a DateTime to a UInt32
' Cannot convert a DateTime to a Int64
' Cannot convert a DateTime to a UInt64
' Cannot convert a DateTime to a Single
' Cannot convert a DateTime to a Double
' Cannot convert a DateTime to a Decimal
' 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (DateTime).
' Returning an en-US date/time format provider.
' 12/26/2010 2:34:00 PM (DateTime) --> 12/26/2010 2:34:00 PM (String).
Uwagi
ChangeType(Object, TypeCode, IFormatProvider) jest metodą konwersji ogólnego przeznaczenia, która konwertuje obiekt określony przez value
na wstępnie zdefiniowany typ określony przez typeCode
. Parametr value
może być obiektem dowolnego typu. Aby konwersja powiodła się, musi zaimplementować IConvertible interfejs, value
ponieważ metoda po prostu opakowuje wywołanie odpowiedniej IConvertible metody. Metoda wymaga również obsługi konwersji value
typeCode
.
Metoda ChangeType(Object, TypeCode, IFormatProvider) nie obsługuje konwersji value
na typ niestandardowy. Aby wykonać taką konwersję, wywołaj metodę ChangeType(Object, Type, IFormatProvider) .
Parametr provider
jest implementacją IFormatProvider , która dostarcza informacje o formatowaniu konwersji. Określa, czy ten parametr jest używany, zależy od podstawowej IConvertible implementacji. Jeśli value
jest podstawowym typem danych, provider
jest używany tylko dla następujących konwersji. null
IFormatProvider Jeśli argument zostanie przekazany do tych metod, CultureInfo używany jest obiekt reprezentujący bieżącą kulturę.
Konwersja z liczby na ciąg lub ciąg na liczbę.
provider
musi być obiektem, obiektem CultureInfo NumberFormatInfo lub implementacją niestandardową IFormatProvider zwracającą NumberFormatInfo obiekt. Jednak ponieważ ChangeType(Object, TypeCode, IFormatProvider) metoda wykonuje konwersję przy użyciu domyślnego specyfikatora formatu "G",provider
parametr nie ma wpływu, jeślivalue
lub typ docelowy jest niepodpisaną liczbą całkowitą.Konwersja z DateTime wartości na ciąg lub ciąg na DateTime wartość.
provider
musi być obiektem CultureInfo lub DateTimeFormatInfo .
Jeśli value
jest typem zdefiniowanym przez aplikację, jego IConvertible implementacja może używać parametru provider
.