Decimal.CompareTo Metoda

Odwołanie

Definicja

Przestrzeń nazw:: System

Zestaw:: System.Runtime.dll

Zestaw:: mscorlib.dll

Zestaw:: netstandard.dll

Ważne

Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.

Porównuje to wystąpienie z określonym obiektem lub Decimal zwraca wskazanie ich wartości względnych.

Przeciążenia

CompareTo(Decimal)	Porównuje to wystąpienie z określonym Decimal obiektem i zwraca porównanie ich wartości względnych.
CompareTo(Object)	Porównuje to wystąpienie z określonym obiektem i zwraca porównanie ich wartości względnych.

CompareTo(Decimal)

Źródło:: Decimal.cs

Źródło:: Decimal.cs

Źródło:: Decimal.cs

Porównuje to wystąpienie z określonym Decimal obiektem i zwraca porównanie ich wartości względnych.

public:
 virtual int CompareTo(System::Decimal value);

public int CompareTo (decimal value);

abstract member CompareTo : decimal -> int
override this.CompareTo : decimal -> int

Public Function CompareTo (value As Decimal) As Integer

Parametry

value: Decimal

Obiekt, który ma zostać porównany z tym wystąpieniem.

Zwraca

Int32

Podpisany numer wskazujący względne wartości tego wystąpienia i value.

Wartość zwracana	Znaczenie
Mniej niż zero	To wystąpienie jest mniejsze niż `value`.
Zero	To wystąpienie jest równe `value`.
Większe od zera	To wystąpienie jest większe niż `value`.

Implementuje

CompareTo(T)

Przykłady

Poniższy przykład kodu przedstawia ogólne i niegeneryczne wersje CompareTo metody dla kilku typów wartości i odwołań.

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11

// This example demonstrates the generic and non-generic versions of the
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample
{
    public static void Main()
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44);
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2,
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric)
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}",
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/

' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

Uwagi

Ta metoda implementuje System.IComparable<T> interfejs i działa nieco lepiej niż Decimal.CompareTo metoda, ponieważ nie musi konwertować parametru value na obiekt.

W zależności od języka programowania można kodować metodę CompareTo , w której typ parametru ma mniej bitów (jest węższy) niż typ wystąpienia. To jest możliwe, ponieważ w niektórych językach programowania jest wykonywana niejawna konwersja poszerzająca, która powoduje reprezentowanie parametru jako typu z taką samą liczbą bitów jak liczba bitów wystąpienia.

Załóżmy na przykład, że typ wystąpienia to Int32 , a typ parametru to Byte. Kompilator Microsoft języka C# generuje instrukcje reprezentujące parametr jako Int32 obiekt, a następnie generuje metodę Int32.CompareTo w celu porównania wartości Int32 wystąpienia i reprezentacji parametruInt32.

Aby ustalić, czy kompilator metody dokonuje na typach liczbowych niejawnych konwersji poszerzających, zajrzyj do dokumentacji języka programowania.

Zobacz też

Dotyczy

CompareTo(Object)

Źródło:: Decimal.cs

Źródło:: Decimal.cs

Źródło:: Decimal.cs

Porównuje to wystąpienie z określonym obiektem i zwraca porównanie ich wartości względnych.

public:
 virtual int CompareTo(System::Object ^ value);

public int CompareTo (object? value);

public int CompareTo (object value);

abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int

Public Function CompareTo (value As Object) As Integer

Parametry

value: Object

Obiekt do porównania z tym wystąpieniem lub null.

Zwraca

Int32

Podpisany numer wskazujący względne wartości tego wystąpienia i value.

Wartość zwracana	Znaczenie
Mniej niż zero	To wystąpienie jest mniejsze niż `value`.
Zero	To wystąpienie jest równe `value`.
Większe od zera	To wystąpienie jest większe niż `value`, lub `value` ma `null`wartość .

Implementuje

CompareTo(Object)

Wyjątki

ArgumentException

value nie jest elementem Decimal.

Przykłady

Poniższy przykład kodu porównuje kilka Decimal i inne obiekty z wartością referencyjną Decimal przy użyciu CompareTo metody .

// Example of the Decimal::CompareTo and Decimal::Equals instance 
// methods.
using namespace System;

// Get the exception type name; remove the namespace prefix.
String^ GetExceptionType( Exception^ ex )
{
   String^ exceptionType = ex->GetType()->ToString();
   return exceptionType->Substring( exceptionType->LastIndexOf( '.' ) + 1 );
}


// Compare the Decimal to the Object parameters, 
// and display the Object parameters with the results.
void CompDecimalToObject( Decimal Left, Object^ Right, String^ RightText )
{
   Console::WriteLine( "{0,-46}{1}", String::Concat( "Object: ", RightText ), Right );
   Console::WriteLine( "{0,-46}{1}", "Left.Equals( Object )", Left.Equals( Right ) );
   Console::Write( "{0,-46}", "Left.CompareTo( Object )" );
   try
   {
      
      // Catch the exception if CompareTo( ) throws one.
      Console::WriteLine( "{0}\n", Left.CompareTo( Right ) );
   }
   catch ( Exception^ ex ) 
   {
      Console::WriteLine( "{0}\n", GetExceptionType( ex ) );
   }

}

int main()
{
   Console::WriteLine( "This example of the Decimal::Equals( Object* ) and \n"
   "Decimal::CompareTo( Object* ) methods generates the \n"
   "following output. It creates several different "
   "Decimal \nvalues and compares them with the following "
   "reference value.\n" );
   
   // Create a reference Decimal value.
   Decimal Left = Decimal(987.654);
   Console::WriteLine( "{0,-46}{1}\n", "Left: Decimal( 987.654 )", Left );
   
   // Create objects to compare with the reference.
   CompDecimalToObject( Left, Decimal(9.8765400E+2), "Decimal( 9.8765400E+2 )" );
   CompDecimalToObject( Left, Decimal::Parse( "987.6541" ), "Decimal::Parse( \"987.6541\" )" );
   CompDecimalToObject( Left, Decimal::Parse( "987.6539" ), "Decimal::Parse( \"987.6539\" )" );
   CompDecimalToObject( Left, Decimal(987654000,0,0,false,6), "Decimal( 987654000, 0, 0, false, 6 )" );
   CompDecimalToObject( Left, 9.8765400E+2, "Double 9.8765400E+2" );
   CompDecimalToObject( Left, "987.654", "String \"987.654\"" );
}

/*
This example of the Decimal::Equals( Object* ) and
Decimal::CompareTo( Object* ) methods generates the
following output. It creates several different Decimal
values and compares them with the following reference value.

Left: Decimal( 987.654 )                      987.654

Object: Decimal( 9.8765400E+2 )               987.654
Left.Equals( Object )                         True
Left.CompareTo( Object )                      0

Object: Decimal::Parse( "987.6541" )          987.6541
Left.Equals( Object )                         False
Left.CompareTo( Object )                      -1

Object: Decimal::Parse( "987.6539" )          987.6539
Left.Equals( Object )                         False
Left.CompareTo( Object )                      1

Object: Decimal( 987654000, 0, 0, false, 6 )  987.654000
Left.Equals( Object )                         True
Left.CompareTo( Object )                      0

Object: Double 9.8765400E+2                   987.654
Left.Equals( Object )                         False
Left.CompareTo( Object )                      ArgumentException

Object: String "987.654"                      987.654
Left.Equals( Object )                         False
Left.CompareTo( Object )                      ArgumentException
*/

// Example of the decimal.CompareTo and decimal.Equals instance
// methods.
using System;

class DecCompToEqualsObjDemo
{
    // Get the exception type name; remove the namespace prefix.
    public static string GetExceptionType( Exception ex )
    {
        string exceptionType = ex.GetType( ).ToString( );
        return exceptionType.Substring(
            exceptionType.LastIndexOf( '.' ) + 1 );
    }

    // Compare the decimal to the object parameters,
    // and display the object parameters with the results.
    public static void CompDecimalToObject( decimal Left,
        object Right, string RightText )
    {

        Console.WriteLine( "{0,-46}{1}", "object: "+RightText,
            Right );
        Console.WriteLine( "{0,-46}{1}", "Left.Equals( object )",
            Left.Equals( Right ) );
        Console.Write( "{0,-46}", "Left.CompareTo( object )" );

        try
        {
            // Catch the exception if CompareTo( ) throws one.
            Console.WriteLine( "{0}\n", Left.CompareTo( Right ) );
        }
        catch( Exception ex )
        {
            Console.WriteLine( "{0}\n", GetExceptionType( ex ) );
        }
    }

    public static void Main( )
    {
        Console.WriteLine(
            "This example of the decimal.Equals( object ) and \n" +
            "decimal.CompareTo( object ) methods generates the \n" +
            "following output. It creates several different " +
            "decimal \nvalues and compares them with the following " +
            "reference value.\n" );

        // Create a reference decimal value.
        decimal Left = new decimal( 987.654 );

        Console.WriteLine( "{0,-46}{1}\n",
            "Left: decimal( 987.654 )", Left );

        // Create objects to compare with the reference.
        CompDecimalToObject( Left, new decimal( 9.8765400E+2 ),
            "decimal( 9.8765400E+2 )" );
        CompDecimalToObject( Left, 987.6541M, "987.6541D" );
        CompDecimalToObject( Left, 987.6539M, "987.6539D" );
        CompDecimalToObject( Left,
            new decimal( 987654000, 0, 0, false, 6 ),
            "decimal( 987654000, 0, 0, false, 6 )" );
        CompDecimalToObject( Left, 9.8765400E+2,
            "Double 9.8765400E+2" );
        CompDecimalToObject( Left, "987.654", "String \"987.654\"" );
    }
}

/*
This example of the decimal.Equals( object ) and
decimal.CompareTo( object ) methods generates the
following output. It creates several different decimal
values and compares them with the following reference value.

Left: decimal( 987.654 )                      987.654

object: decimal( 9.8765400E+2 )               987.654
Left.Equals( object )                         True
Left.CompareTo( object )                      0

object: 987.6541D                             987.6541
Left.Equals( object )                         False
Left.CompareTo( object )                      -1

object: 987.6539D                             987.6539
Left.Equals( object )                         False
Left.CompareTo( object )                      1

object: decimal( 987654000, 0, 0, false, 6 )  987.654000
Left.Equals( object )                         True
Left.CompareTo( object )                      0

object: Double 9.8765400E+2                   987.654
Left.Equals( object )                         False
Left.CompareTo( object )                      ArgumentException

object: String "987.654"                      987.654
Left.Equals( object )                         False
Left.CompareTo( object )                      ArgumentException
*/

// Example of the decimal.CompareTo and decimal.Equals instance
// methods.
open System

// Get the exception type name remove the namespace prefix.
let getExceptionType (ex: exn) =
    let exceptionType = ex.GetType() |> string
    exceptionType.Substring(exceptionType.LastIndexOf '.'  + 1)

// Compare the decimal to the object parameters,
// and display the object parameters with the results.
let compDecimalToObject (left: decimal) (right: obj) (rightText: string) =
    printfn $"object: %-38s{rightText}{right}"
    printfn $"""%-46s{"left.Equals(object)"}{left.Equals right}"""       
    printf $"""%-46s{"left.CompareTo(object)"}"""

    try
        // Catch the exception if CompareTo( ) throws one.
        printfn $"{left.CompareTo right}\n"
    with ex ->
        printfn $"{getExceptionType ex}\n"

Console.WriteLine(
    "This example of the decimal.Equals( object ) and \n" +
    "decimal.CompareTo( object ) methods generates the \n" +
    "following output. It creates several different " +
    "decimal \nvalues and compares them with the following " +
    "reference value.\n" )

// Create a reference decimal value.
let left = decimal 987.654

printfn $"""{"Left: decimal(987.654)",-46}{left}\n"""

// Create objects to compare with the reference.
compDecimalToObject left (decimal 9.8765400E+2 ) "decimal(9.8765400E+2)"
compDecimalToObject left 987.6541M "987.6541D"
compDecimalToObject left 987.6539M "987.6539D"
compDecimalToObject left (Decimal(987654000, 0, 0, false, 6uy)) "Decimal(987654000, 0, 0, false, 6)"
compDecimalToObject left 9.8765400E+2 "Double 9.8765400E+2"
compDecimalToObject left "987.654" "String \"987.654\""


// This example of the Decimal.Equals(object) and
// Decimal.CompareTo(object) methods generates the
// following output. It creates several different decimal
// values and compares them with the following reference value.
// Left: decimal(987.654)                        987.654
//
// object: decimal(9.8765400E+2)                 987.654
// left.Equals(object)                           True
// left.CompareTo(object)                        0
//
// object: 987.6541D                             987.6541
// left.Equals(object)                           False
// left.CompareTo(object)                        -1
//
// object: 987.6539D                             987.6539
// left.Equals(object)                           False
// left.CompareTo(object)                        1
//
// object: Decimal(987654000, 0, 0, false, 6)    987.654000
// left.Equals(object)                           True
// left.CompareTo(object)                        0
//
// object: Double 9.8765400E+2                   987.654
// left.Equals(object)                           False
// left.CompareTo(object)                        ArgumentException
//
// object: String "987.654"                      987.654
// left.Equals(object)                           False
// left.CompareTo(object)                        ArgumentException

' Example of the Decimal.CompareTo and Decimal.Equals instance methods.
Module DecCompToEqualsObjDemo
    
    ' Get the exception type name; remove the namespace prefix.
    Function GetExceptionType( ex As Exception ) As String

        Dim exceptionType   As String = ex.GetType( ).ToString( )
        Return exceptionType.Substring( _
            exceptionType.LastIndexOf( "."c ) + 1 )
    End Function

    ' Compare the Decimal to the Object parameters, 
    ' and display the Object parameters with the results.
    Sub CompDecimalToObject( Left as Decimal, Right as Object, _
        RightText as String )

        Console.WriteLine( "{0,-46}{1}", "Object: " & RightText, _
            Right )
        Console.WriteLine( "{0,-46}{1}", "Left.Equals( Object )", _
            Left.Equals( Right ) )
        Console.Write( "{0,-46}", "Left.CompareTo( Object )" )

        ' Catch the exception if CompareTo( ) throws one.
        Try
            Console.WriteLine( "{0}" & vbCrLf, _
                Left.CompareTo( Right ) )
        Catch ex As Exception
            Console.WriteLine( "{0}" & vbCrLf, _
                GetExceptionType( ex ) )
        End Try
    End Sub

    Sub Main( )
        Console.WriteLine( _
            "This example of the Decimal.Equals( Object ) " & _
            "and " & vbCrLf & "Decimal.CompareTo( Object ) " & _
            "methods generates the " & vbCrLf & _
            "following output. It creates several different " & _
            "Decimal " & vbCrLf & "values and compares them " & _
            "with the following reference value." & vbCrLf )

        ' Create a reference Decimal value.
        Dim Left as New Decimal( 987.654 )

        Console.WriteLine( "{0,-46}{1}" & vbCrLf, _
            "Left: Decimal( 987.654 )", Left )

        ' Create objects to compare with the reference.
        CompDecimalToObject( Left, New Decimal( 9.8765400E+2 ), _
            "Decimal( 9.8765400E+2 )" )
        CompDecimalToObject( Left, 987.6541D, "987.6541D" )
        CompDecimalToObject( Left, 987.6539D, "987.6539D" )
        CompDecimalToObject( Left, _
            New Decimal( 987654000, 0, 0, false, 6 ), _
            "Decimal( 987654000, 0, 0, false, 6 )" )
        CompDecimalToObject( Left, 9.8765400E+2, _
            "Double 9.8765400E+2" )
        CompDecimalToObject( Left, "987.654", _
            "String ""987.654""" )
    End Sub
End Module 

' This example of the Decimal.Equals( Object ) and
' Decimal.CompareTo( Object ) methods generates the
' following output. It creates several different Decimal
' values and compares them with the following reference value.
' 
' Left: Decimal( 987.654 )                      987.654
' 
' Object: Decimal( 9.8765400E+2 )               987.654
' Left.Equals( Object )                         True
' Left.CompareTo( Object )                      0
' 
' Object: 987.6541D                             987.6541
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      -1
' 
' Object: 987.6539D                             987.6539
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      1
' 
' Object: Decimal( 987654000, 0, 0, false, 6 )  987.654000
' Left.Equals( Object )                         True
' Left.CompareTo( Object )                      0
' 
' Object: Double 9.8765400E+2                   987.654
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      ArgumentException
' 
' Object: String "987.654"                      987.654
' Left.Equals( Object )                         False
' Left.CompareTo( Object )                      ArgumentException

Uwagi

Każde wystąpienie klasy Decimal, niezależnie od jego wartości, jest uznawane za większe niż null.

Parametr value musi być null lub wystąpieniem Decimalobiektu ; w przeciwnym razie zgłaszany jest wyjątek.

Zobacz też

Dotyczy

Udostępnij za pośrednictwem

Decimal.CompareTo Metoda

Definicja

Przeciążenia

CompareTo(Decimal)

Parametry

Zwraca

Implementuje

Przykłady

Uwagi

Zobacz też

Dotyczy

CompareTo(Object)

Parametry

Zwraca

Implementuje

Wyjątki

Przykłady

Uwagi

Zobacz też

Dotyczy

Dodatkowe zasoby