ILGenerator.EmitWriteLine Metoda
Definicja
Ważne
Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.
Funkcje pomocnika, aby emitować wywołanie z WriteLine() różnymi typami wartości.
Przeciążenia
| EmitWriteLine(String) |
Emituje język pośredni microsoft (MSIL) do wywołania WriteLine za pomocą ciągu. |
| EmitWriteLine(FieldInfo) |
Emituje język microsoft intermediate language (MSIL) niezbędny do wywołania WriteLine z danym polem. |
| EmitWriteLine(LocalBuilder) |
Emituje język pośredni microsoft (MSIL) niezbędny do wywołania WriteLine z daną zmienną lokalną. |
EmitWriteLine(String)
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
Emituje język pośredni microsoft (MSIL) do wywołania WriteLine za pomocą ciągu.
public:
virtual void EmitWriteLine(System::String ^ value);public virtual void EmitWriteLine (string value);abstract member EmitWriteLine : string -> unit
override this.EmitWriteLine : string -> unitPublic Overridable Sub EmitWriteLine (value As String)Parametry
- value
- String
Ciąg do wydrukowania.
Przykłady
Poniższy przykład kodu przedstawia kontekstowe użycie EmitWriteLine metody w celu zapisania ciągu do konsoli w metodzie dynamicznej.
using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ CreateDynamicType()
{
array<Type^>^ctorParams = {int::typeid,int::typeid};
AppDomain^ myDomain = Thread::GetDomain();
AssemblyName^ myAsmName = gcnew AssemblyName;
myAsmName->Name = "MyDynamicAssembly";
AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::Run );
ModuleBuilder^ pointModule = myAsmBuilder->DefineDynamicModule( "PointModule", "Point.dll" );
TypeBuilder^ pointTypeBld = pointModule->DefineType( "Point", TypeAttributes::Public );
FieldBuilder^ xField = pointTypeBld->DefineField( "x", int::typeid, FieldAttributes::Public );
FieldBuilder^ yField = pointTypeBld->DefineField( "y", int::typeid, FieldAttributes::Public );
Type^ objType = Type::GetType( "System.Object" );
ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
ConstructorBuilder^ pointCtor = pointTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
ILGenerator^ ctorIL = pointCtor->GetILGenerator();
// First, you build the constructor.
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Call, objCtor );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_1 );
ctorIL->Emit( OpCodes::Stfld, xField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_2 );
ctorIL->Emit( OpCodes::Stfld, yField );
ctorIL->Emit( OpCodes::Ret );
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder^ writeStrMthd = pointTypeBld->DefineMethod( "WritePoint", MethodAttributes::Public, void::typeid, nullptr );
ILGenerator^ writeStrIL = writeStrMthd->GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// String* output through STDIN.
// ILGenerator::EmitWriteLine(String*) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL->EmitWriteLine( "The value of this current instance is:" );
// Here, you will do the hard work yourself. First, you need to create
// the String* we will be passing and obtain the correct WriteLine overload
// for said String*. In the below case, you are substituting in two values,
// so the chosen overload is Console::WriteLine(String*, Object*, Object*).
String^ inStr = "( {0}, {1})";
array<Type^>^wlParams = {String::typeid,Object::typeid,Object::typeid};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo^ writeLineMI = Console::typeid->GetMethod( "WriteLine", wlParams );
// Push the String* with the substitutions onto the stack.
// This is the first argument for WriteLine - the String* one.
writeStrIL->Emit( OpCodes::Ldstr, inStr );
// Since the second argument is an Object*, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an Object*. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, xField );
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an Object*.
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Atop the stack, you'll find our String* inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, yField );
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Now, you have all of the arguments for your call to
// Console::WriteLine(String*, Object*, Object*) atop the stack:
// the String* InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console::WriteLine(String*, Object*, Object*) with EmitCall.
writeStrIL->EmitCall( OpCodes::Call, writeLineMI, nullptr );
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL->EmitWriteLine( "The value of 'x' is:" );
writeStrIL->EmitWriteLine( xField );
writeStrIL->EmitWriteLine( "The value of 'y' is:" );
writeStrIL->EmitWriteLine( yField );
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL->Emit( OpCodes::Ret );
return pointTypeBld->CreateType();
}
int main()
{
array<Object^>^ctorParams = gcnew array<Object^>(2);
Console::Write( "Enter a integer value for X: " );
String^ myX = Console::ReadLine();
Console::Write( "Enter a integer value for Y: " );
String^ myY = Console::ReadLine();
Console::WriteLine( "---" );
ctorParams[ 0 ] = Convert::ToInt32( myX );
ctorParams[ 1 ] = Convert::ToInt32( myY );
Type^ ptType = CreateDynamicType();
Object^ ptInstance = Activator::CreateInstance( ptType, ctorParams );
ptType->InvokeMember( "WritePoint", BindingFlags::InvokeMethod, nullptr, ptInstance, gcnew array<Object^>(0) );
}
using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;
class EmitWriteLineDemo {
public static Type CreateDynamicType() {
Type[] ctorParams = new Type[] {typeof(int),
typeof(int)};
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.Run);
ModuleBuilder pointModule = myAsmBuilder.DefineDynamicModule("PointModule",
"Point.dll");
TypeBuilder pointTypeBld = pointModule.DefineType("Point",
TypeAttributes.Public);
FieldBuilder xField = pointTypeBld.DefineField("x", typeof(int),
FieldAttributes.Public);
FieldBuilder yField = pointTypeBld.DefineField("y", typeof(int),
FieldAttributes.Public);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder pointCtor = pointTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = pointCtor.GetILGenerator();
// First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ret);
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder writeStrMthd = pointTypeBld.DefineMethod(
"WritePoint",
MethodAttributes.Public,
typeof(void),
null);
ILGenerator writeStrIL = writeStrMthd.GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// string output through STDIN.
// ILGenerator.EmitWriteLine(string) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:");
// Here, you will do the hard work yourself. First, you need to create
// the string we will be passing and obtain the correct WriteLine overload
// for said string. In the below case, you are substituting in two values,
// so the chosen overload is Console.WriteLine(string, object, object).
String inStr = "({0}, {1})";
Type[] wlParams = new Type[] {typeof(string),
typeof(object),
typeof(object)};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo writeLineMI = typeof(Console).GetMethod(
"WriteLine",
wlParams);
// Push the string with the substitutions onto the stack.
// This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr);
// Since the second argument is an object, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an object. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, xField);
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Atop the stack, you'll find our string inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, yField);
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Now, you have all of the arguments for your call to
// Console.WriteLine(string, object, object) atop the stack:
// the string InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, null);
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:");
writeStrIL.EmitWriteLine(xField);
writeStrIL.EmitWriteLine("The value of 'y' is:");
writeStrIL.EmitWriteLine(yField);
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL.Emit(OpCodes.Ret);
return pointTypeBld.CreateType();
}
public static void Main() {
object[] ctorParams = new object[2];
Console.Write("Enter a integer value for X: ");
string myX = Console.ReadLine();
Console.Write("Enter a integer value for Y: ");
string myY = Console.ReadLine();
Console.WriteLine("---");
ctorParams[0] = Convert.ToInt32(myX);
ctorParams[1] = Convert.ToInt32(myY);
Type ptType = CreateDynamicType();
object ptInstance = Activator.CreateInstance(ptType, ctorParams);
ptType.InvokeMember("WritePoint",
BindingFlags.InvokeMethod,
null,
ptInstance,
new object[0]);
}
}
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit
_
Class EmitWriteLineDemo
Public Shared Function CreateDynamicType() As Type
Dim ctorParams() As Type = {GetType(Integer), GetType(Integer)}
Dim myDomain As AppDomain = Thread.GetDomain()
Dim myAsmName As New AssemblyName()
myAsmName.Name = "MyDynamicAssembly"
Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly(myAsmName, AssemblyBuilderAccess.RunAndSave)
Dim pointModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule("PointModule", "Point.dll")
Dim pointTypeBld As TypeBuilder = pointModule.DefineType("Point", _
TypeAttributes.Public)
Dim xField As FieldBuilder = pointTypeBld.DefineField("x", _
GetType(Integer), _
FieldAttributes.Public)
Dim yField As FieldBuilder = pointTypeBld.DefineField("y", _
GetType(Integer), _
FieldAttributes.Public)
Dim objType As Type = Type.GetType("System.Object")
Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type(){})
Dim pointCtor As ConstructorBuilder = pointTypeBld.DefineConstructor( _
MethodAttributes.Public, _
CallingConventions.Standard, _
ctorParams)
Dim ctorIL As ILGenerator = pointCtor.GetILGenerator()
' First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Call, objCtor)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_1)
ctorIL.Emit(OpCodes.Stfld, xField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_2)
ctorIL.Emit(OpCodes.Stfld, yField)
ctorIL.Emit(OpCodes.Ret)
' Now, you'll build a method to output some information on the
' inside your dynamic class. This method will have the following
' definition in C#:
' Public Sub WritePoint()
Dim writeStrMthd As MethodBuilder = pointTypeBld.DefineMethod("WritePoint", _
MethodAttributes.Public, _
Nothing, Nothing)
Dim writeStrIL As ILGenerator = writeStrMthd.GetILGenerator()
' The below ILGenerator created demonstrates a few ways to create
' string output through STDIN.
' ILGenerator.EmitWriteLine(string) will generate a ldstr and a
' call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:")
' Here, you will do the hard work yourself. First, you need to create
' the string we will be passing and obtain the correct WriteLine overload
' for said string. In the below case, you are substituting in two values,
' so the chosen overload is Console.WriteLine(string, object, object).
Dim inStr As [String] = "({0}, {1})"
Dim wlParams() As Type = {GetType(String), GetType(Object), GetType(Object)}
' We need the MethodInfo to pass into EmitCall later.
Dim writeLineMI As MethodInfo = GetType(Console).GetMethod("WriteLine", wlParams)
' Push the string with the substitutions onto the stack.
' This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr)
' Since the second argument is an object, and it corresponds to
' to the substitution for the value of our integer field, you
' need to box that field to an object. First, push a reference
' to the current instance, and then push the value stored in
' field 'x'. We need the reference to the current instance (stored
' in local argument index 0) so Ldfld can load from the correct
' instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, xField)
' Now, we execute the box opcode, which pops the value of field 'x',
' returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Atop the stack, you'll find our string inStr, followed by a reference
' to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, yField)
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Now, you have all of the arguments for your call to
' Console.WriteLine(string, object, object) atop the stack:
' the string InStr, a reference to the boxed value of 'x', and
' a reference to the boxed value of 'y'.
' Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, Nothing)
' Lastly, EmitWriteLine can also output the value of a field
' using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:")
writeStrIL.EmitWriteLine(xField)
writeStrIL.EmitWriteLine("The value of 'y' is:")
writeStrIL.EmitWriteLine(yField)
' Since we return no value (void), the ret opcode will not
' return the top stack value.
writeStrIL.Emit(OpCodes.Ret)
Return pointTypeBld.CreateType()
End Function 'CreateDynamicType
Public Shared Sub Main()
Dim ctorParams(1) As Object
Console.Write("Enter a integer value for X: ")
Dim myX As String = Console.ReadLine()
Console.Write("Enter a integer value for Y: ")
Dim myY As String = Console.ReadLine()
Console.WriteLine("---")
ctorParams(0) = Convert.ToInt32(myX)
ctorParams(1) = Convert.ToInt32(myY)
Dim ptType As Type = CreateDynamicType()
Dim ptInstance As Object = Activator.CreateInstance(ptType, ctorParams)
ptType.InvokeMember("WritePoint", _
BindingFlags.InvokeMethod, _
Nothing, ptInstance, Nothing)
End Sub
End Class
Uwagi
Ciąg musi już zostać zdefiniowany.
Dotyczy
EmitWriteLine(FieldInfo)
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
Emituje język microsoft intermediate language (MSIL) niezbędny do wywołania WriteLine z danym polem.
public:
virtual void EmitWriteLine(System::Reflection::FieldInfo ^ fld);public virtual void EmitWriteLine (System.Reflection.FieldInfo fld);abstract member EmitWriteLine : System.Reflection.FieldInfo -> unit
override this.EmitWriteLine : System.Reflection.FieldInfo -> unitPublic Overridable Sub EmitWriteLine (fld As FieldInfo)Parametry
- fld
- FieldInfo
Pole, którego wartość ma zostać zapisana w konsoli programu .
Wyjątki
Nie ma przeciążenia WriteLine metody, która akceptuje typ określonego pola.
fld to null.
Typ pola to TypeBuilder lub EnumBuilder, które nie są obsługiwane.
Przykłady
Poniższy przykładowy kod przedstawia użycie EmitWriteLine metody do pisania ciągu w konsoli w metodzie dynamicznej.
using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ CreateDynamicType()
{
array<Type^>^ctorParams = {int::typeid,int::typeid};
AppDomain^ myDomain = Thread::GetDomain();
AssemblyName^ myAsmName = gcnew AssemblyName;
myAsmName->Name = "MyDynamicAssembly";
AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::Run );
ModuleBuilder^ pointModule = myAsmBuilder->DefineDynamicModule( "PointModule", "Point.dll" );
TypeBuilder^ pointTypeBld = pointModule->DefineType( "Point", TypeAttributes::Public );
FieldBuilder^ xField = pointTypeBld->DefineField( "x", int::typeid, FieldAttributes::Public );
FieldBuilder^ yField = pointTypeBld->DefineField( "y", int::typeid, FieldAttributes::Public );
Type^ objType = Type::GetType( "System.Object" );
ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
ConstructorBuilder^ pointCtor = pointTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
ILGenerator^ ctorIL = pointCtor->GetILGenerator();
// First, you build the constructor.
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Call, objCtor );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_1 );
ctorIL->Emit( OpCodes::Stfld, xField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_2 );
ctorIL->Emit( OpCodes::Stfld, yField );
ctorIL->Emit( OpCodes::Ret );
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder^ writeStrMthd = pointTypeBld->DefineMethod( "WritePoint", MethodAttributes::Public, void::typeid, nullptr );
ILGenerator^ writeStrIL = writeStrMthd->GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// String* output through STDIN.
// ILGenerator::EmitWriteLine(String*) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL->EmitWriteLine( "The value of this current instance is:" );
// Here, you will do the hard work yourself. First, you need to create
// the String* we will be passing and obtain the correct WriteLine overload
// for said String*. In the below case, you are substituting in two values,
// so the chosen overload is Console::WriteLine(String*, Object*, Object*).
String^ inStr = "( {0}, {1})";
array<Type^>^wlParams = {String::typeid,Object::typeid,Object::typeid};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo^ writeLineMI = Console::typeid->GetMethod( "WriteLine", wlParams );
// Push the String* with the substitutions onto the stack.
// This is the first argument for WriteLine - the String* one.
writeStrIL->Emit( OpCodes::Ldstr, inStr );
// Since the second argument is an Object*, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an Object*. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, xField );
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an Object*.
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Atop the stack, you'll find our String* inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, yField );
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Now, you have all of the arguments for your call to
// Console::WriteLine(String*, Object*, Object*) atop the stack:
// the String* InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console::WriteLine(String*, Object*, Object*) with EmitCall.
writeStrIL->EmitCall( OpCodes::Call, writeLineMI, nullptr );
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL->EmitWriteLine( "The value of 'x' is:" );
writeStrIL->EmitWriteLine( xField );
writeStrIL->EmitWriteLine( "The value of 'y' is:" );
writeStrIL->EmitWriteLine( yField );
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL->Emit( OpCodes::Ret );
return pointTypeBld->CreateType();
}
int main()
{
array<Object^>^ctorParams = gcnew array<Object^>(2);
Console::Write( "Enter a integer value for X: " );
String^ myX = Console::ReadLine();
Console::Write( "Enter a integer value for Y: " );
String^ myY = Console::ReadLine();
Console::WriteLine( "---" );
ctorParams[ 0 ] = Convert::ToInt32( myX );
ctorParams[ 1 ] = Convert::ToInt32( myY );
Type^ ptType = CreateDynamicType();
Object^ ptInstance = Activator::CreateInstance( ptType, ctorParams );
ptType->InvokeMember( "WritePoint", BindingFlags::InvokeMethod, nullptr, ptInstance, gcnew array<Object^>(0) );
}
using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;
class EmitWriteLineDemo {
public static Type CreateDynamicType() {
Type[] ctorParams = new Type[] {typeof(int),
typeof(int)};
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.Run);
ModuleBuilder pointModule = myAsmBuilder.DefineDynamicModule("PointModule",
"Point.dll");
TypeBuilder pointTypeBld = pointModule.DefineType("Point",
TypeAttributes.Public);
FieldBuilder xField = pointTypeBld.DefineField("x", typeof(int),
FieldAttributes.Public);
FieldBuilder yField = pointTypeBld.DefineField("y", typeof(int),
FieldAttributes.Public);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder pointCtor = pointTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = pointCtor.GetILGenerator();
// First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ret);
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder writeStrMthd = pointTypeBld.DefineMethod(
"WritePoint",
MethodAttributes.Public,
typeof(void),
null);
ILGenerator writeStrIL = writeStrMthd.GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// string output through STDIN.
// ILGenerator.EmitWriteLine(string) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:");
// Here, you will do the hard work yourself. First, you need to create
// the string we will be passing and obtain the correct WriteLine overload
// for said string. In the below case, you are substituting in two values,
// so the chosen overload is Console.WriteLine(string, object, object).
String inStr = "({0}, {1})";
Type[] wlParams = new Type[] {typeof(string),
typeof(object),
typeof(object)};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo writeLineMI = typeof(Console).GetMethod(
"WriteLine",
wlParams);
// Push the string with the substitutions onto the stack.
// This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr);
// Since the second argument is an object, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an object. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, xField);
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Atop the stack, you'll find our string inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, yField);
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Now, you have all of the arguments for your call to
// Console.WriteLine(string, object, object) atop the stack:
// the string InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, null);
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:");
writeStrIL.EmitWriteLine(xField);
writeStrIL.EmitWriteLine("The value of 'y' is:");
writeStrIL.EmitWriteLine(yField);
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL.Emit(OpCodes.Ret);
return pointTypeBld.CreateType();
}
public static void Main() {
object[] ctorParams = new object[2];
Console.Write("Enter a integer value for X: ");
string myX = Console.ReadLine();
Console.Write("Enter a integer value for Y: ");
string myY = Console.ReadLine();
Console.WriteLine("---");
ctorParams[0] = Convert.ToInt32(myX);
ctorParams[1] = Convert.ToInt32(myY);
Type ptType = CreateDynamicType();
object ptInstance = Activator.CreateInstance(ptType, ctorParams);
ptType.InvokeMember("WritePoint",
BindingFlags.InvokeMethod,
null,
ptInstance,
new object[0]);
}
}
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit
_
Class EmitWriteLineDemo
Public Shared Function CreateDynamicType() As Type
Dim ctorParams() As Type = {GetType(Integer), GetType(Integer)}
Dim myDomain As AppDomain = Thread.GetDomain()
Dim myAsmName As New AssemblyName()
myAsmName.Name = "MyDynamicAssembly"
Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly(myAsmName, AssemblyBuilderAccess.RunAndSave)
Dim pointModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule("PointModule", "Point.dll")
Dim pointTypeBld As TypeBuilder = pointModule.DefineType("Point", _
TypeAttributes.Public)
Dim xField As FieldBuilder = pointTypeBld.DefineField("x", _
GetType(Integer), _
FieldAttributes.Public)
Dim yField As FieldBuilder = pointTypeBld.DefineField("y", _
GetType(Integer), _
FieldAttributes.Public)
Dim objType As Type = Type.GetType("System.Object")
Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type(){})
Dim pointCtor As ConstructorBuilder = pointTypeBld.DefineConstructor( _
MethodAttributes.Public, _
CallingConventions.Standard, _
ctorParams)
Dim ctorIL As ILGenerator = pointCtor.GetILGenerator()
' First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Call, objCtor)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_1)
ctorIL.Emit(OpCodes.Stfld, xField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_2)
ctorIL.Emit(OpCodes.Stfld, yField)
ctorIL.Emit(OpCodes.Ret)
' Now, you'll build a method to output some information on the
' inside your dynamic class. This method will have the following
' definition in C#:
' Public Sub WritePoint()
Dim writeStrMthd As MethodBuilder = pointTypeBld.DefineMethod("WritePoint", _
MethodAttributes.Public, _
Nothing, Nothing)
Dim writeStrIL As ILGenerator = writeStrMthd.GetILGenerator()
' The below ILGenerator created demonstrates a few ways to create
' string output through STDIN.
' ILGenerator.EmitWriteLine(string) will generate a ldstr and a
' call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:")
' Here, you will do the hard work yourself. First, you need to create
' the string we will be passing and obtain the correct WriteLine overload
' for said string. In the below case, you are substituting in two values,
' so the chosen overload is Console.WriteLine(string, object, object).
Dim inStr As [String] = "({0}, {1})"
Dim wlParams() As Type = {GetType(String), GetType(Object), GetType(Object)}
' We need the MethodInfo to pass into EmitCall later.
Dim writeLineMI As MethodInfo = GetType(Console).GetMethod("WriteLine", wlParams)
' Push the string with the substitutions onto the stack.
' This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr)
' Since the second argument is an object, and it corresponds to
' to the substitution for the value of our integer field, you
' need to box that field to an object. First, push a reference
' to the current instance, and then push the value stored in
' field 'x'. We need the reference to the current instance (stored
' in local argument index 0) so Ldfld can load from the correct
' instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, xField)
' Now, we execute the box opcode, which pops the value of field 'x',
' returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Atop the stack, you'll find our string inStr, followed by a reference
' to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, yField)
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Now, you have all of the arguments for your call to
' Console.WriteLine(string, object, object) atop the stack:
' the string InStr, a reference to the boxed value of 'x', and
' a reference to the boxed value of 'y'.
' Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, Nothing)
' Lastly, EmitWriteLine can also output the value of a field
' using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:")
writeStrIL.EmitWriteLine(xField)
writeStrIL.EmitWriteLine("The value of 'y' is:")
writeStrIL.EmitWriteLine(yField)
' Since we return no value (void), the ret opcode will not
' return the top stack value.
writeStrIL.Emit(OpCodes.Ret)
Return pointTypeBld.CreateType()
End Function 'CreateDynamicType
Public Shared Sub Main()
Dim ctorParams(1) As Object
Console.Write("Enter a integer value for X: ")
Dim myX As String = Console.ReadLine()
Console.Write("Enter a integer value for Y: ")
Dim myY As String = Console.ReadLine()
Console.WriteLine("---")
ctorParams(0) = Convert.ToInt32(myX)
ctorParams(1) = Convert.ToInt32(myY)
Dim ptType As Type = CreateDynamicType()
Dim ptInstance As Object = Activator.CreateInstance(ptType, ctorParams)
ptType.InvokeMember("WritePoint", _
BindingFlags.InvokeMethod, _
Nothing, ptInstance, Nothing)
End Sub
End Class
Uwagi
Typ fld musi być zgodny z typem parametru przeciążenia Console.WriteLine metody.
Dotyczy
EmitWriteLine(LocalBuilder)
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
- Źródło:
- ILGenerator.cs
Emituje język pośredni microsoft (MSIL) niezbędny do wywołania WriteLine z daną zmienną lokalną.
public:
virtual void EmitWriteLine(System::Reflection::Emit::LocalBuilder ^ localBuilder);public virtual void EmitWriteLine (System.Reflection.Emit.LocalBuilder localBuilder);abstract member EmitWriteLine : System.Reflection.Emit.LocalBuilder -> unit
override this.EmitWriteLine : System.Reflection.Emit.LocalBuilder -> unitPublic Overridable Sub EmitWriteLine (localBuilder As LocalBuilder)Parametry
- localBuilder
- LocalBuilder
Zmienna lokalna, której wartość ma zostać zapisana w konsoli programu .
Wyjątki
Typ to localBuilderTypeBuilder lub EnumBuilder, które nie są obsługiwane.
-lub-
Nie ma przeciążenia WriteLine , które akceptuje typ localBuilder.
localBuilder to null.
Przykłady
Poniższy przykład kodu przedstawia kontekstowe użycie EmitWriteLine metody w celu zapisania ciągu do konsoli w metodzie dynamicznej.
using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ CreateDynamicType()
{
array<Type^>^ctorParams = {int::typeid,int::typeid};
AppDomain^ myDomain = Thread::GetDomain();
AssemblyName^ myAsmName = gcnew AssemblyName;
myAsmName->Name = "MyDynamicAssembly";
AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::Run );
ModuleBuilder^ pointModule = myAsmBuilder->DefineDynamicModule( "PointModule", "Point.dll" );
TypeBuilder^ pointTypeBld = pointModule->DefineType( "Point", TypeAttributes::Public );
FieldBuilder^ xField = pointTypeBld->DefineField( "x", int::typeid, FieldAttributes::Public );
FieldBuilder^ yField = pointTypeBld->DefineField( "y", int::typeid, FieldAttributes::Public );
Type^ objType = Type::GetType( "System.Object" );
ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
ConstructorBuilder^ pointCtor = pointTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
ILGenerator^ ctorIL = pointCtor->GetILGenerator();
// First, you build the constructor.
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Call, objCtor );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_1 );
ctorIL->Emit( OpCodes::Stfld, xField );
ctorIL->Emit( OpCodes::Ldarg_0 );
ctorIL->Emit( OpCodes::Ldarg_2 );
ctorIL->Emit( OpCodes::Stfld, yField );
ctorIL->Emit( OpCodes::Ret );
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder^ writeStrMthd = pointTypeBld->DefineMethod( "WritePoint", MethodAttributes::Public, void::typeid, nullptr );
ILGenerator^ writeStrIL = writeStrMthd->GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// String* output through STDIN.
// ILGenerator::EmitWriteLine(String*) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL->EmitWriteLine( "The value of this current instance is:" );
// Here, you will do the hard work yourself. First, you need to create
// the String* we will be passing and obtain the correct WriteLine overload
// for said String*. In the below case, you are substituting in two values,
// so the chosen overload is Console::WriteLine(String*, Object*, Object*).
String^ inStr = "( {0}, {1})";
array<Type^>^wlParams = {String::typeid,Object::typeid,Object::typeid};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo^ writeLineMI = Console::typeid->GetMethod( "WriteLine", wlParams );
// Push the String* with the substitutions onto the stack.
// This is the first argument for WriteLine - the String* one.
writeStrIL->Emit( OpCodes::Ldstr, inStr );
// Since the second argument is an Object*, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an Object*. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, xField );
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an Object*.
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Atop the stack, you'll find our String* inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL->Emit( OpCodes::Ldarg_0 );
writeStrIL->Emit( OpCodes::Ldfld, yField );
writeStrIL->Emit( OpCodes::Box, int::typeid );
// Now, you have all of the arguments for your call to
// Console::WriteLine(String*, Object*, Object*) atop the stack:
// the String* InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console::WriteLine(String*, Object*, Object*) with EmitCall.
writeStrIL->EmitCall( OpCodes::Call, writeLineMI, nullptr );
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL->EmitWriteLine( "The value of 'x' is:" );
writeStrIL->EmitWriteLine( xField );
writeStrIL->EmitWriteLine( "The value of 'y' is:" );
writeStrIL->EmitWriteLine( yField );
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL->Emit( OpCodes::Ret );
return pointTypeBld->CreateType();
}
int main()
{
array<Object^>^ctorParams = gcnew array<Object^>(2);
Console::Write( "Enter a integer value for X: " );
String^ myX = Console::ReadLine();
Console::Write( "Enter a integer value for Y: " );
String^ myY = Console::ReadLine();
Console::WriteLine( "---" );
ctorParams[ 0 ] = Convert::ToInt32( myX );
ctorParams[ 1 ] = Convert::ToInt32( myY );
Type^ ptType = CreateDynamicType();
Object^ ptInstance = Activator::CreateInstance( ptType, ctorParams );
ptType->InvokeMember( "WritePoint", BindingFlags::InvokeMethod, nullptr, ptInstance, gcnew array<Object^>(0) );
}
using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;
class EmitWriteLineDemo {
public static Type CreateDynamicType() {
Type[] ctorParams = new Type[] {typeof(int),
typeof(int)};
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.Run);
ModuleBuilder pointModule = myAsmBuilder.DefineDynamicModule("PointModule",
"Point.dll");
TypeBuilder pointTypeBld = pointModule.DefineType("Point",
TypeAttributes.Public);
FieldBuilder xField = pointTypeBld.DefineField("x", typeof(int),
FieldAttributes.Public);
FieldBuilder yField = pointTypeBld.DefineField("y", typeof(int),
FieldAttributes.Public);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder pointCtor = pointTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = pointCtor.GetILGenerator();
// First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ret);
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder writeStrMthd = pointTypeBld.DefineMethod(
"WritePoint",
MethodAttributes.Public,
typeof(void),
null);
ILGenerator writeStrIL = writeStrMthd.GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// string output through STDIN.
// ILGenerator.EmitWriteLine(string) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:");
// Here, you will do the hard work yourself. First, you need to create
// the string we will be passing and obtain the correct WriteLine overload
// for said string. In the below case, you are substituting in two values,
// so the chosen overload is Console.WriteLine(string, object, object).
String inStr = "({0}, {1})";
Type[] wlParams = new Type[] {typeof(string),
typeof(object),
typeof(object)};
// We need the MethodInfo to pass into EmitCall later.
MethodInfo writeLineMI = typeof(Console).GetMethod(
"WriteLine",
wlParams);
// Push the string with the substitutions onto the stack.
// This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr);
// Since the second argument is an object, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an object. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, xField);
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Atop the stack, you'll find our string inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, yField);
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Now, you have all of the arguments for your call to
// Console.WriteLine(string, object, object) atop the stack:
// the string InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, null);
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:");
writeStrIL.EmitWriteLine(xField);
writeStrIL.EmitWriteLine("The value of 'y' is:");
writeStrIL.EmitWriteLine(yField);
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL.Emit(OpCodes.Ret);
return pointTypeBld.CreateType();
}
public static void Main() {
object[] ctorParams = new object[2];
Console.Write("Enter a integer value for X: ");
string myX = Console.ReadLine();
Console.Write("Enter a integer value for Y: ");
string myY = Console.ReadLine();
Console.WriteLine("---");
ctorParams[0] = Convert.ToInt32(myX);
ctorParams[1] = Convert.ToInt32(myY);
Type ptType = CreateDynamicType();
object ptInstance = Activator.CreateInstance(ptType, ctorParams);
ptType.InvokeMember("WritePoint",
BindingFlags.InvokeMethod,
null,
ptInstance,
new object[0]);
}
}
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit
_
Class EmitWriteLineDemo
Public Shared Function CreateDynamicType() As Type
Dim ctorParams() As Type = {GetType(Integer), GetType(Integer)}
Dim myDomain As AppDomain = Thread.GetDomain()
Dim myAsmName As New AssemblyName()
myAsmName.Name = "MyDynamicAssembly"
Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly(myAsmName, AssemblyBuilderAccess.RunAndSave)
Dim pointModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule("PointModule", "Point.dll")
Dim pointTypeBld As TypeBuilder = pointModule.DefineType("Point", _
TypeAttributes.Public)
Dim xField As FieldBuilder = pointTypeBld.DefineField("x", _
GetType(Integer), _
FieldAttributes.Public)
Dim yField As FieldBuilder = pointTypeBld.DefineField("y", _
GetType(Integer), _
FieldAttributes.Public)
Dim objType As Type = Type.GetType("System.Object")
Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type(){})
Dim pointCtor As ConstructorBuilder = pointTypeBld.DefineConstructor( _
MethodAttributes.Public, _
CallingConventions.Standard, _
ctorParams)
Dim ctorIL As ILGenerator = pointCtor.GetILGenerator()
' First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Call, objCtor)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_1)
ctorIL.Emit(OpCodes.Stfld, xField)
ctorIL.Emit(OpCodes.Ldarg_0)
ctorIL.Emit(OpCodes.Ldarg_2)
ctorIL.Emit(OpCodes.Stfld, yField)
ctorIL.Emit(OpCodes.Ret)
' Now, you'll build a method to output some information on the
' inside your dynamic class. This method will have the following
' definition in C#:
' Public Sub WritePoint()
Dim writeStrMthd As MethodBuilder = pointTypeBld.DefineMethod("WritePoint", _
MethodAttributes.Public, _
Nothing, Nothing)
Dim writeStrIL As ILGenerator = writeStrMthd.GetILGenerator()
' The below ILGenerator created demonstrates a few ways to create
' string output through STDIN.
' ILGenerator.EmitWriteLine(string) will generate a ldstr and a
' call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:")
' Here, you will do the hard work yourself. First, you need to create
' the string we will be passing and obtain the correct WriteLine overload
' for said string. In the below case, you are substituting in two values,
' so the chosen overload is Console.WriteLine(string, object, object).
Dim inStr As [String] = "({0}, {1})"
Dim wlParams() As Type = {GetType(String), GetType(Object), GetType(Object)}
' We need the MethodInfo to pass into EmitCall later.
Dim writeLineMI As MethodInfo = GetType(Console).GetMethod("WriteLine", wlParams)
' Push the string with the substitutions onto the stack.
' This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr)
' Since the second argument is an object, and it corresponds to
' to the substitution for the value of our integer field, you
' need to box that field to an object. First, push a reference
' to the current instance, and then push the value stored in
' field 'x'. We need the reference to the current instance (stored
' in local argument index 0) so Ldfld can load from the correct
' instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, xField)
' Now, we execute the box opcode, which pops the value of field 'x',
' returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Atop the stack, you'll find our string inStr, followed by a reference
' to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0)
writeStrIL.Emit(OpCodes.Ldfld, yField)
writeStrIL.Emit(OpCodes.Box, GetType(Integer))
' Now, you have all of the arguments for your call to
' Console.WriteLine(string, object, object) atop the stack:
' the string InStr, a reference to the boxed value of 'x', and
' a reference to the boxed value of 'y'.
' Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, Nothing)
' Lastly, EmitWriteLine can also output the value of a field
' using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:")
writeStrIL.EmitWriteLine(xField)
writeStrIL.EmitWriteLine("The value of 'y' is:")
writeStrIL.EmitWriteLine(yField)
' Since we return no value (void), the ret opcode will not
' return the top stack value.
writeStrIL.Emit(OpCodes.Ret)
Return pointTypeBld.CreateType()
End Function 'CreateDynamicType
Public Shared Sub Main()
Dim ctorParams(1) As Object
Console.Write("Enter a integer value for X: ")
Dim myX As String = Console.ReadLine()
Console.Write("Enter a integer value for Y: ")
Dim myY As String = Console.ReadLine()
Console.WriteLine("---")
ctorParams(0) = Convert.ToInt32(myX)
ctorParams(1) = Convert.ToInt32(myY)
Dim ptType As Type = CreateDynamicType()
Dim ptInstance As Object = Activator.CreateInstance(ptType, ctorParams)
ptType.InvokeMember("WritePoint", _
BindingFlags.InvokeMethod, _
Nothing, ptInstance, Nothing)
End Sub
End Class
Uwagi
Typ localBuilder musi być zgodny z typem parametru przeciążenia Console.WriteLine metody.
Dotyczy
Współpracuj z nami w serwisie GitHub
Źródło tej zawartości można znaleźć w witrynie GitHub, gdzie można również tworzyć i przeglądać problemy i żądania ściągnięcia. Więcej informacji znajdziesz w naszym przewodniku dla współtwórców.
Opinia
Dostępne już wkrótce: W 2024 r. będziemy stopniowo wycofywać zgłoszenia z serwisu GitHub jako mechanizm przesyłania opinii na temat zawartości i zastępować go nowym systemem opinii. Aby uzyskać więcej informacji, sprawdź: https://aka.ms/ContentUserFeedback.
Prześlij i wyświetl opinię dla