MethodBuilder.GetILGenerator Metoda

Odwołanie

Definicja

Przestrzeń nazw:: System.Reflection.Emit

Zestaw:: System.Reflection.Emit.dll

Zestaw:: mscorlib.dll

Zestaw:: netstandard.dll

Pakiet:: System.Reflection.Emit v4.7.0

Ważne

Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.

Zwraca wartość ILGenerator dla tej metody.

Przeciążenia

GetILGenerator()	Zwraca wartość `ILGenerator` dla tej metody z domyślnym rozmiarem strumienia języka pośredniego firmy Microsoft (MSIL) o rozmiarze 64 bajtów.
GetILGenerator(Int32)	Zwraca wartość `ILGenerator` dla tej metody o określonym rozmiarze strumienia języka microsoft pośredniego (MSIL).

GetILGenerator()

Źródło:: MethodBuilder.cs

Źródło:: MethodBuilder.cs

Źródło:: MethodBuilder.cs

Zwraca wartość ILGenerator dla tej metody z domyślnym rozmiarem strumienia języka pośredniego firmy Microsoft (MSIL) o rozmiarze 64 bajtów.

public:
 System::Reflection::Emit::ILGenerator ^ GetILGenerator();

public System.Reflection.Emit.ILGenerator GetILGenerator ();

member this.GetILGenerator : unit -> System.Reflection.Emit.ILGenerator

Public Function GetILGenerator () As ILGenerator

Zwraca

ILGenerator

ILGenerator Zwraca obiekt dla tej metody.

Wyjątki

InvalidOperationException

Metoda nie powinna mieć treści ze względu na jej MethodAttributes flagi, MethodImplAttributes na przykład ze względu na flagę PinvokeImpl .

-lub-

Metoda jest metodą ogólną, ale nie definicją metody ogólnej. Oznacza to, IsGenericMethod że właściwość to true, ale IsGenericMethodDefinition właściwość to false.

Przykłady

Poniższy przykład kodu przedstawia kontekstowe użycie GetILGenerator metody, tworząc i emitując zestaw dynamiczny, który obliczy kropkę dwóch punktów w przestrzeni 3D.

using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
   Type^ ivType = nullptr;
   array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^ctorParams = temp0;
   AppDomain^ myDomain = Thread::GetDomain();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "IntVectorAsm";
   AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
   TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
   FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
   FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = ivCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_3 );
   ctorIL->Emit( OpCodes::Stfld, zField );
   ctorIL->Emit( OpCodes::Ret );
   
   // This method will find the dot product of the stored vector
   // with another.
   array<Type^>^temp1 = {ivTypeBld};
   array<Type^>^dpParams = temp1;
   
   // Here, you create a MethodBuilder containing the
   // name, the attributes (public, static, private, and so on),
   // the return type (int, in this case), and a array of Type
   // indicating the type of each parameter. Since the sole parameter
   // is a IntVector, the very class you're creating, you will
   // pass in the TypeBuilder (which is derived from Type) instead of
   // a Type object for IntVector, avoiding an exception.
   // -- This method would be declared in C# as:
   //    public int DotProduct(IntVector aVector)
   MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
   
   // A ILGenerator can now be spawned, attached to the MethodBuilder.
   ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
   
   // Here's the body of our function, in MSIL form. We're going to find the
   // "dot product" of the current vector instance with the passed vector
   // instance. For reference purposes, the equation is:
   // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
   // First, you'll load the reference to the current instance "this"
   // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
   // instruction, will pop the reference off the stack and look up the
   // field "x", specified by the FieldInfo token "xField".
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // That completed, the value stored at field "x" is now atop the stack.
   // Now, you'll do the same for the Object reference we passed as a
   // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
   // you'll have the value stored in field "x" for the passed instance
   // atop the stack.
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // There will now be two values atop the stack - the "x" value for the
   // current vector instance, and the "x" value for the passed instance.
   // You'll now multiply them, and push the result onto the evaluation stack.
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Now, repeat this for the "y" fields of both vectors.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // At this time, the results of both multiplications should be atop
   // the stack. You'll now add them and push the result onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // Multiply both "z" field and push the result onto the stack.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Finally, add the result of multiplying the "z" fields with the
   // result of the earlier addition, and push the result - the dot product -
   // onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // The "ret" opcode will pop the last value from the stack and return it
   // to the calling method. You're all done!
   mthdIL->Emit( OpCodes::Ret );
   ivType = ivTypeBld->CreateType();
   return ivType;
}

int main()
{
   Type^ IVType = nullptr;
   Object^ aVector1 = nullptr;
   Object^ aVector2 = nullptr;
   array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^aVtypes = temp2;
   array<Object^>^temp3 = {10,10,10};
   array<Object^>^aVargs1 = temp3;
   array<Object^>^temp4 = {20,20,20};
   array<Object^>^aVargs2 = temp4;
   
   // Call the  method to build our dynamic class.
   IVType = DynamicDotProductGen();
   Console::WriteLine( "---" );
   ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
   aVector1 = myDTctor->Invoke( aVargs1 );
   aVector2 = myDTctor->Invoke( aVargs2 );
   array<Object^>^passMe = gcnew array<Object^>(1);
   passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
   Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}

// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600

using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class TestILGenerator
{
    public static Type DynamicDotProductGen()
    {
       Type ivType = null;
       Type[] ctorParams = new Type[] { typeof(int),
                                typeof(int),
                        typeof(int)};
    
       AppDomain myDomain = Thread.GetDomain();
       AssemblyName myAsmName = new AssemblyName();
       myAsmName.Name = "IntVectorAsm";
    
       AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                      myAsmName,
                      AssemblyBuilderAccess.RunAndSave);

       ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
                                        "Vector.dll");

       TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
                                      TypeAttributes.Public);

       FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
                                                       FieldAttributes.Private);

           Type objType = Type.GetType("System.Object");
           ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

       ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
                      MethodAttributes.Public,
                      CallingConventions.Standard,
                      ctorParams);
       ILGenerator ctorIL = ivCtor.GetILGenerator();
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Call, objCtor);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_1);
           ctorIL.Emit(OpCodes.Stfld, xField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_2);
           ctorIL.Emit(OpCodes.Stfld, yField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_3);
           ctorIL.Emit(OpCodes.Stfld, zField);
       ctorIL.Emit(OpCodes.Ret);

       // This method will find the dot product of the stored vector
       // with another.

       Type[] dpParams = new Type[] { ivTypeBld };

           // Here, you create a MethodBuilder containing the
       // name, the attributes (public, static, private, and so on),
       // the return type (int, in this case), and a array of Type
       // indicating the type of each parameter. Since the sole parameter
       // is a IntVector, the very class you're creating, you will
       // pass in the TypeBuilder (which is derived from Type) instead of
       // a Type object for IntVector, avoiding an exception.

       // -- This method would be declared in C# as:
       //    public int DotProduct(IntVector aVector)

           MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
                                  "DotProduct",
                          MethodAttributes.Public,
                                          typeof(int),
                                          dpParams);

       // A ILGenerator can now be spawned, attached to the MethodBuilder.

       ILGenerator mthdIL = dotProductMthd.GetILGenerator();
    
       // Here's the body of our function, in MSIL form. We're going to find the
       // "dot product" of the current vector instance with the passed vector
       // instance. For reference purposes, the equation is:
       // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product

       // First, you'll load the reference to the current instance "this"
       // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
       // instruction, will pop the reference off the stack and look up the
       // field "x", specified by the FieldInfo token "xField".

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, xField);

       // That completed, the value stored at field "x" is now atop the stack.
       // Now, you'll do the same for the object reference we passed as a
       // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
       // you'll have the value stored in field "x" for the passed instance
       // atop the stack.

       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, xField);

           // There will now be two values atop the stack - the "x" value for the
       // current vector instance, and the "x" value for the passed instance.
       // You'll now multiply them, and push the result onto the evaluation stack.

       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Now, repeat this for the "y" fields of both vectors.

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // At this time, the results of both multiplications should be atop
       // the stack. You'll now add them and push the result onto the stack.

       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // Multiply both "z" field and push the result onto the stack.
       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Finally, add the result of multiplying the "z" fields with the
       // result of the earlier addition, and push the result - the dot product -
       // onto the stack.
       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // The "ret" opcode will pop the last value from the stack and return it
       // to the calling method. You're all done!

       mthdIL.Emit(OpCodes.Ret);

       ivType = ivTypeBld.CreateType();

       return ivType;
    }

    public static void Main() {
    
       Type IVType = null;
           object aVector1 = null;
           object aVector2 = null;
       Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
           object[] aVargs1 = new object[] {10, 10, 10};
           object[] aVargs2 = new object[] {20, 20, 20};
    
       // Call the  method to build our dynamic class.

       IVType = DynamicDotProductGen();

           Console.WriteLine("---");

       ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
       aVector1 = myDTctor.Invoke(aVargs1);
       aVector2 = myDTctor.Invoke(aVargs2);

       object[] passMe = new object[1];
           passMe[0] = (object)aVector2;

       Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
                 IVType.InvokeMember("DotProduct",
                          BindingFlags.InvokeMethod,
                          null,
                          aVector1,
                          passMe));

       // +++ OUTPUT +++
       // ---
       // (10, 10, 10) . (20, 20, 20) = 600
    }
}

Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _


Class TestILGenerator
   
   
   Public Shared Function DynamicDotProductGen() As Type
      
      Dim ivType As Type = Nothing
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "IntVectorAsm"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
                        myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
                         "IntVectorModule", _
                         "Vector.dll")
      
      Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
      
      Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _ 
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      
      
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
                     MethodAttributes.Public, _
                     CallingConventions.Standard, _
                     ctorParams)
      Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_3)
      ctorIL.Emit(OpCodes.Stfld, zField)
      ctorIL.Emit(OpCodes.Ret)
     

      ' Now, you'll construct the method find the dot product of two vectors. First,
      ' let's define the parameters that will be accepted by the method. In this case,
      ' it's an IntVector itself!

      Dim dpParams() As Type = {ivTypeBld}
      
      ' Here, you create a MethodBuilder containing the
      ' name, the attributes (public, static, private, and so on),
      ' the return type (int, in this case), and a array of Type
      ' indicating the type of each parameter. Since the sole parameter
      ' is a IntVector, the very class you're creating, you will
      ' pass in the TypeBuilder (which is derived from Type) instead of 
      ' a Type object for IntVector, avoiding an exception. 
      ' -- This method would be declared in VB.NET as:
      '    Public Function DotProduct(IntVector aVector) As Integer

      Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
                        MethodAttributes.Public, GetType(Integer), _
                                            dpParams)
      
      ' A ILGenerator can now be spawned, attached to the MethodBuilder.
      Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
      
      ' Here's the body of our function, in MSIL form. We're going to find the
      ' "dot product" of the current vector instance with the passed vector 
      ' instance. For reference purposes, the equation is:
      ' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
      ' First, you'll load the reference to the current instance "this"
      ' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
      ' instruction, will pop the reference off the stack and look up the
      ' field "x", specified by the FieldInfo token "xField".
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' That completed, the value stored at field "x" is now atop the stack.
      ' Now, you'll do the same for the object reference we passed as a
      ' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
      ' you'll have the value stored in field "x" for the passed instance
      ' atop the stack.
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' There will now be two values atop the stack - the "x" value for the
      ' current vector instance, and the "x" value for the passed instance.
      ' You'll now multiply them, and push the result onto the evaluation stack.
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Now, repeat this for the "y" fields of both vectors.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' At this time, the results of both multiplications should be atop
      ' the stack. You'll now add them and push the result onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' Multiply both "z" field and push the result onto the stack.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Finally, add the result of multiplying the "z" fields with the
      ' result of the earlier addition, and push the result - the dot product -
      ' onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' The "ret" opcode will pop the last value from the stack and return it
      ' to the calling method. You're all done!
      mthdIL.Emit(OpCodes.Ret)
      
      
      ivType = ivTypeBld.CreateType()
      
      Return ivType
   End Function 'DynamicDotProductGen
    
   
   Public Shared Sub Main()
      
      Dim IVType As Type = Nothing
      Dim aVector1 As Object = Nothing
      Dim aVector2 As Object = Nothing
      Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      Dim aVargs1() As Object = {10, 10, 10}
      Dim aVargs2() As Object = {20, 20, 20}
      
      ' Call the  method to build our dynamic class.
      IVType = DynamicDotProductGen()
      
      
      Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
      aVector1 = myDTctor.Invoke(aVargs1)
      aVector2 = myDTctor.Invoke(aVargs2)
      
      Console.WriteLine("---")
      Dim passMe(0) As Object
      passMe(0) = CType(aVector2, Object)
      
      Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
                        IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
                        Nothing, aVector1, passMe))
   End Sub
End Class



' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600

Dotyczy

GetILGenerator(Int32)

Źródło:: MethodBuilder.cs

Źródło:: MethodBuilder.cs

Źródło:: MethodBuilder.cs

Zwraca wartość ILGenerator dla tej metody o określonym rozmiarze strumienia języka microsoft pośredniego (MSIL).

public:
 System::Reflection::Emit::ILGenerator ^ GetILGenerator(int size);

public System.Reflection.Emit.ILGenerator GetILGenerator (int size);

member this.GetILGenerator : int -> System.Reflection.Emit.ILGenerator

Public Function GetILGenerator (size As Integer) As ILGenerator

Parametry

size: Int32

Rozmiar strumienia MSIL w bajtach.

Zwraca

ILGenerator

ILGenerator Zwraca obiekt dla tej metody.

Wyjątki

InvalidOperationException

Metoda nie powinna mieć treści ze względu na jej MethodAttributes flagi, MethodImplAttributes na przykład ze względu na flagę PinvokeImpl .

-lub-

Metoda jest metodą ogólną, ale nie definicją metody ogólnej. Oznacza to, IsGenericMethod że właściwość to true, ale IsGenericMethodDefinition właściwość to false.

Przykłady

Poniższy przykład kodu przedstawia kontekstowe użycie GetILGenerator metody, tworząc i emitując zestaw dynamiczny, który obliczy kropkę dwóch punktów w przestrzeni 3D.

using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
   Type^ ivType = nullptr;
   array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^ctorParams = temp0;
   AppDomain^ myDomain = Thread::GetDomain();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "IntVectorAsm";
   AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
   TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
   FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
   FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = ivCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_3 );
   ctorIL->Emit( OpCodes::Stfld, zField );
   ctorIL->Emit( OpCodes::Ret );
   
   // This method will find the dot product of the stored vector
   // with another.
   array<Type^>^temp1 = {ivTypeBld};
   array<Type^>^dpParams = temp1;
   
   // Here, you create a MethodBuilder containing the
   // name, the attributes (public, static, private, and so on),
   // the return type (int, in this case), and a array of Type
   // indicating the type of each parameter. Since the sole parameter
   // is a IntVector, the very class you're creating, you will
   // pass in the TypeBuilder (which is derived from Type) instead of
   // a Type object for IntVector, avoiding an exception.
   // -- This method would be declared in C# as:
   //    public int DotProduct(IntVector aVector)
   MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
   
   // A ILGenerator can now be spawned, attached to the MethodBuilder.
   ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
   
   // Here's the body of our function, in MSIL form. We're going to find the
   // "dot product" of the current vector instance with the passed vector
   // instance. For reference purposes, the equation is:
   // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
   // First, you'll load the reference to the current instance "this"
   // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
   // instruction, will pop the reference off the stack and look up the
   // field "x", specified by the FieldInfo token "xField".
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // That completed, the value stored at field "x" is now atop the stack.
   // Now, you'll do the same for the Object reference we passed as a
   // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
   // you'll have the value stored in field "x" for the passed instance
   // atop the stack.
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // There will now be two values atop the stack - the "x" value for the
   // current vector instance, and the "x" value for the passed instance.
   // You'll now multiply them, and push the result onto the evaluation stack.
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Now, repeat this for the "y" fields of both vectors.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // At this time, the results of both multiplications should be atop
   // the stack. You'll now add them and push the result onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // Multiply both "z" field and push the result onto the stack.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Finally, add the result of multiplying the "z" fields with the
   // result of the earlier addition, and push the result - the dot product -
   // onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // The "ret" opcode will pop the last value from the stack and return it
   // to the calling method. You're all done!
   mthdIL->Emit( OpCodes::Ret );
   ivType = ivTypeBld->CreateType();
   return ivType;
}

int main()
{
   Type^ IVType = nullptr;
   Object^ aVector1 = nullptr;
   Object^ aVector2 = nullptr;
   array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^aVtypes = temp2;
   array<Object^>^temp3 = {10,10,10};
   array<Object^>^aVargs1 = temp3;
   array<Object^>^temp4 = {20,20,20};
   array<Object^>^aVargs2 = temp4;
   
   // Call the  method to build our dynamic class.
   IVType = DynamicDotProductGen();
   Console::WriteLine( "---" );
   ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
   aVector1 = myDTctor->Invoke( aVargs1 );
   aVector2 = myDTctor->Invoke( aVargs2 );
   array<Object^>^passMe = gcnew array<Object^>(1);
   passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
   Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}

// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600

using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class TestILGenerator
{
    public static Type DynamicDotProductGen()
    {
       Type ivType = null;
       Type[] ctorParams = new Type[] { typeof(int),
                                typeof(int),
                        typeof(int)};
    
       AppDomain myDomain = Thread.GetDomain();
       AssemblyName myAsmName = new AssemblyName();
       myAsmName.Name = "IntVectorAsm";
    
       AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                      myAsmName,
                      AssemblyBuilderAccess.RunAndSave);

       ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
                                        "Vector.dll");

       TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
                                      TypeAttributes.Public);

       FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
                                                       FieldAttributes.Private);

           Type objType = Type.GetType("System.Object");
           ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

       ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
                      MethodAttributes.Public,
                      CallingConventions.Standard,
                      ctorParams);
       ILGenerator ctorIL = ivCtor.GetILGenerator();
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Call, objCtor);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_1);
           ctorIL.Emit(OpCodes.Stfld, xField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_2);
           ctorIL.Emit(OpCodes.Stfld, yField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_3);
           ctorIL.Emit(OpCodes.Stfld, zField);
       ctorIL.Emit(OpCodes.Ret);

       // This method will find the dot product of the stored vector
       // with another.

       Type[] dpParams = new Type[] { ivTypeBld };

           // Here, you create a MethodBuilder containing the
       // name, the attributes (public, static, private, and so on),
       // the return type (int, in this case), and a array of Type
       // indicating the type of each parameter. Since the sole parameter
       // is a IntVector, the very class you're creating, you will
       // pass in the TypeBuilder (which is derived from Type) instead of
       // a Type object for IntVector, avoiding an exception.

       // -- This method would be declared in C# as:
       //    public int DotProduct(IntVector aVector)

           MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
                                  "DotProduct",
                          MethodAttributes.Public,
                                          typeof(int),
                                          dpParams);

       // A ILGenerator can now be spawned, attached to the MethodBuilder.

       ILGenerator mthdIL = dotProductMthd.GetILGenerator();
    
       // Here's the body of our function, in MSIL form. We're going to find the
       // "dot product" of the current vector instance with the passed vector
       // instance. For reference purposes, the equation is:
       // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product

       // First, you'll load the reference to the current instance "this"
       // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
       // instruction, will pop the reference off the stack and look up the
       // field "x", specified by the FieldInfo token "xField".

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, xField);

       // That completed, the value stored at field "x" is now atop the stack.
       // Now, you'll do the same for the object reference we passed as a
       // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
       // you'll have the value stored in field "x" for the passed instance
       // atop the stack.

       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, xField);

           // There will now be two values atop the stack - the "x" value for the
       // current vector instance, and the "x" value for the passed instance.
       // You'll now multiply them, and push the result onto the evaluation stack.

       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Now, repeat this for the "y" fields of both vectors.

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // At this time, the results of both multiplications should be atop
       // the stack. You'll now add them and push the result onto the stack.

       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // Multiply both "z" field and push the result onto the stack.
       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Finally, add the result of multiplying the "z" fields with the
       // result of the earlier addition, and push the result - the dot product -
       // onto the stack.
       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // The "ret" opcode will pop the last value from the stack and return it
       // to the calling method. You're all done!

       mthdIL.Emit(OpCodes.Ret);

       ivType = ivTypeBld.CreateType();

       return ivType;
    }

    public static void Main() {
    
       Type IVType = null;
           object aVector1 = null;
           object aVector2 = null;
       Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
           object[] aVargs1 = new object[] {10, 10, 10};
           object[] aVargs2 = new object[] {20, 20, 20};
    
       // Call the  method to build our dynamic class.

       IVType = DynamicDotProductGen();

           Console.WriteLine("---");

       ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
       aVector1 = myDTctor.Invoke(aVargs1);
       aVector2 = myDTctor.Invoke(aVargs2);

       object[] passMe = new object[1];
           passMe[0] = (object)aVector2;

       Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
                 IVType.InvokeMember("DotProduct",
                          BindingFlags.InvokeMethod,
                          null,
                          aVector1,
                          passMe));

       // +++ OUTPUT +++
       // ---
       // (10, 10, 10) . (20, 20, 20) = 600
    }
}

Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _


Class TestILGenerator
   
   
   Public Shared Function DynamicDotProductGen() As Type
      
      Dim ivType As Type = Nothing
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "IntVectorAsm"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
                        myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
                         "IntVectorModule", _
                         "Vector.dll")
      
      Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
      
      Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _ 
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      
      
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
                     MethodAttributes.Public, _
                     CallingConventions.Standard, _
                     ctorParams)
      Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_3)
      ctorIL.Emit(OpCodes.Stfld, zField)
      ctorIL.Emit(OpCodes.Ret)
     

      ' Now, you'll construct the method find the dot product of two vectors. First,
      ' let's define the parameters that will be accepted by the method. In this case,
      ' it's an IntVector itself!

      Dim dpParams() As Type = {ivTypeBld}
      
      ' Here, you create a MethodBuilder containing the
      ' name, the attributes (public, static, private, and so on),
      ' the return type (int, in this case), and a array of Type
      ' indicating the type of each parameter. Since the sole parameter
      ' is a IntVector, the very class you're creating, you will
      ' pass in the TypeBuilder (which is derived from Type) instead of 
      ' a Type object for IntVector, avoiding an exception. 
      ' -- This method would be declared in VB.NET as:
      '    Public Function DotProduct(IntVector aVector) As Integer

      Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
                        MethodAttributes.Public, GetType(Integer), _
                                            dpParams)
      
      ' A ILGenerator can now be spawned, attached to the MethodBuilder.
      Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
      
      ' Here's the body of our function, in MSIL form. We're going to find the
      ' "dot product" of the current vector instance with the passed vector 
      ' instance. For reference purposes, the equation is:
      ' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
      ' First, you'll load the reference to the current instance "this"
      ' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
      ' instruction, will pop the reference off the stack and look up the
      ' field "x", specified by the FieldInfo token "xField".
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' That completed, the value stored at field "x" is now atop the stack.
      ' Now, you'll do the same for the object reference we passed as a
      ' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
      ' you'll have the value stored in field "x" for the passed instance
      ' atop the stack.
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' There will now be two values atop the stack - the "x" value for the
      ' current vector instance, and the "x" value for the passed instance.
      ' You'll now multiply them, and push the result onto the evaluation stack.
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Now, repeat this for the "y" fields of both vectors.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' At this time, the results of both multiplications should be atop
      ' the stack. You'll now add them and push the result onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' Multiply both "z" field and push the result onto the stack.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Finally, add the result of multiplying the "z" fields with the
      ' result of the earlier addition, and push the result - the dot product -
      ' onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' The "ret" opcode will pop the last value from the stack and return it
      ' to the calling method. You're all done!
      mthdIL.Emit(OpCodes.Ret)
      
      
      ivType = ivTypeBld.CreateType()
      
      Return ivType
   End Function 'DynamicDotProductGen
    
   
   Public Shared Sub Main()
      
      Dim IVType As Type = Nothing
      Dim aVector1 As Object = Nothing
      Dim aVector2 As Object = Nothing
      Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      Dim aVargs1() As Object = {10, 10, 10}
      Dim aVargs2() As Object = {20, 20, 20}
      
      ' Call the  method to build our dynamic class.
      IVType = DynamicDotProductGen()
      
      
      Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
      aVector1 = myDTctor.Invoke(aVargs1)
      aVector2 = myDTctor.Invoke(aVargs2)
      
      Console.WriteLine("---")
      Dim passMe(0) As Object
      passMe(0) = CType(aVector2, Object)
      
      Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
                        IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
                        Nothing, aVector1, passMe))
   End Sub
End Class



' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600

Dotyczy

Udostępnij za pośrednictwem

MethodBuilder.GetILGenerator Metoda

Definicja

Przeciążenia

GetILGenerator()

Zwraca

Wyjątki

Przykłady

Dotyczy

GetILGenerator(Int32)

Parametry

Zwraca

Wyjątki

Przykłady

Dotyczy

Dodatkowe zasoby