TypeBuilder.MakeArrayType Metoda

Definicja

Przestrzeń nazw:

System.Reflection.Emit

Zestawy:

netstandard.dll, System.Reflection.Emit.dll

Type Zwraca obiekt reprezentujący tablicę bieżącego typu.

Przeciążenia

Nazwa	Opis
MakeArrayType(Int32)	Type Zwraca obiekt reprezentujący tablicę bieżącego typu z określoną liczbą wymiarów.
MakeArrayType()	Type Zwraca obiekt reprezentujący jednowymiarową tablicę bieżącego typu z dolną granicą zera.

MakeArrayType(Int32)

Źródło:

TypeBuilder.cs

Type Zwraca obiekt reprezentujący tablicę bieżącego typu z określoną liczbą wymiarów.

public:
 override Type ^ MakeArrayType(int rank);

[System.Diagnostics.CodeAnalysis.RequiresDynamicCode("The code for an array of the specified type might not be available.")]
public override Type MakeArrayType(int rank);

[<System.Diagnostics.CodeAnalysis.RequiresDynamicCode("The code for an array of the specified type might not be available.")>]
override this.MakeArrayType : int -> Type

Public Overrides Function MakeArrayType (rank As Integer) As Type

Parametry

rank

Int32

Liczba wymiarów tablicy.

Zwraca

Type

Type Obiekt reprezentujący jednowymiarową tablicę bieżącego typu.

Atrybuty

RequiresDynamicCodeAttribute

Wyjątki

IndexOutOfRangeException

rank nie jest prawidłowym wymiarem tablicy.

Przykłady

Poniższy przykład kodu tworzy moduł dynamiczny, typ abstrakcyjny o nazwie i metodę abstrakcyjną o nazwie SampleTestMethod. TestMethod przyjmuje parametr ref (ByRef w Visual Basic) typu Sample, wskaźnik do wpisywania Sample i tablicy typu Sample. Zwraca dwuwymiarową tablicę typu Sample. Przykładowy kod zapisuje dynamiczny moduł na dysku, aby można było go zbadać przy użyciu Ildasm.exe (IL Dezasembler).

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Uwagi

Metoda MakeArrayType zapewnia sposób generowania typu tablicy przy użyciu dowolnego możliwego typu elementu, w tym typów ogólnych.

Zobacz też

• MakeByRefType()
• MakePointerType()

MakeArrayType()

Źródło:

TypeBuilder.cs

Type Zwraca obiekt reprezentujący jednowymiarową tablicę bieżącego typu z dolną granicą zera.

public:
 override Type ^ MakeArrayType();

[System.Diagnostics.CodeAnalysis.RequiresDynamicCode("The code for an array of the specified type might not be available.")]
public override Type MakeArrayType();

[<System.Diagnostics.CodeAnalysis.RequiresDynamicCode("The code for an array of the specified type might not be available.")>]
override this.MakeArrayType : unit -> Type

Public Overrides Function MakeArrayType () As Type

Zwraca

Type

Type Obiekt reprezentujący jednowymiarowy typ tablicy, którego typ elementu jest bieżącym typem, z dolną granicą zera.

Atrybuty

RequiresDynamicCodeAttribute

Przykłady

Poniższy przykład kodu tworzy moduł dynamiczny, typ abstrakcyjny o nazwie i metodę abstrakcyjną o nazwie SampleTestMethod. TestMethod przyjmuje parametr ref (ByRef w Visual Basic) typu Sample, wskaźnik do wpisywania Sample i tablicy typu Sample. Zwraca dwuwymiarową tablicę typu Sample. Przykładowy kod zapisuje dynamiczny moduł na dysku, aby można było go zbadać przy użyciu Ildasm.exe (IL Dezasembler).

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Uwagi

Metoda MakeArrayType zapewnia sposób generowania typu tablicy przy użyciu dowolnego możliwego typu elementu, w tym typów ogólnych.

Zobacz też

• MakeByRefType()
• MakePointerType()