ParameterInfo.IsOptional Właściwość

Odwołanie

Definicja

Przestrzeń nazw:: System.Reflection

Zestaw:: System.Reflection.dll

Zestaw:: System.Runtime.dll

Zestaw:: mscorlib.dll

Zestaw:: netstandard.dll

Źródło:: ParameterInfo.cs

Źródło:: ParameterInfo.cs

Źródło:: ParameterInfo.cs

Ważne

Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.

Pobiera wartość wskazującą, czy ten parametr jest opcjonalny.

public:
 property bool IsOptional { bool get(); };

public bool IsOptional { get; }

member this.IsOptional : bool

Public ReadOnly Property IsOptional As Boolean

Wartość właściwości

Boolean

true jeśli parametr jest opcjonalny; w przeciwnym razie , false.

Przykłady

W poniższym przykładzie pokazano, jak przetestować parametry metody dla ParameterAttributes.Inatrybutów , i ParameterAttributes.Optional . ParameterAttributes.Out

Przykład zawiera metodę DefineMethod , która wykonuje następujące czynności:

Tworzy zestaw dynamiczny zawierający MyType typ.
Dodaje metodę MyMethod do MyTypeelementu . MyMethod ma trzy parametry. Pierwszy parametr jest zdefiniowany za pomocą ParameterAttributes.Inpolecenia , drugi z elementami ParameterAttributes.Outi trzeci z ParameterAttributes.Optional.
Wywołania TypeBuilder.CreateType w celu ukończenia typu.

Po wykonaniu DefineMethodpolecenia przykład przeszukuje zestawy, które są aktualnie ładowane do momentu znalezienia zestawu dynamicznego. Ładuje MyType z zestawu, pobiera MethodInfo obiekt dla MyMethod metody i sprawdza parametry. W przykładzie IsInużyto właściwości , IsOuti IsOptional do wyświetlenia informacji o parametrach.

using namespace System;
using namespace System::Reflection;
using namespace System::Threading;
using namespace System::Reflection::Emit;
void DefineMethod()
{
   AssemblyName^ myAssemblyName = gcnew AssemblyName;
   myAssemblyName->Name = "MyAssembly";

   // Get the assembly builder from the application domain associated with the current thread.
   AssemblyBuilder^ myAssemblyBuilder = Thread::GetDomain()->DefineDynamicAssembly( myAssemblyName, AssemblyBuilderAccess::RunAndSave );

   // Create a dynamic module in the assembly.
   ModuleBuilder^ myModuleBuilder = myAssemblyBuilder->DefineDynamicModule( "MyModule", "MyAssembly.dll" );

   // Create a type in the module.
   TypeBuilder^ myTypeBuilder = myModuleBuilder->DefineType( "MyType" );

   // Create a method called MyMethod.
   array<Type^>^type1 = {int::typeid,short::typeid,long::typeid};
   MethodBuilder^ myMethodBuilder = myTypeBuilder->DefineMethod( "MyMethod", static_cast<MethodAttributes>(MethodAttributes::Public | MethodAttributes::HideBySig | MethodAttributes::Static), String::typeid, type1 );

   // Set the attributes for the parameters of the method.
   // Set the attribute for the first parameter to IN.
   ParameterBuilder^ myParameterBuilder = myMethodBuilder->DefineParameter( 1, ParameterAttributes::In, "MyIntParameter" );

   // Set the attribute for the second parameter to OUT.
   myParameterBuilder = myMethodBuilder->DefineParameter( 2, ParameterAttributes::Out, "MyShortParameter" );

   // Set the attribute for the third parameter to OPTIONAL.
   myParameterBuilder = myMethodBuilder->DefineParameter( 3, static_cast<ParameterAttributes>(ParameterAttributes::Optional | ParameterAttributes::HasDefault), "MyLongParameter" );

   // Get the Microsoft Intermediate Language generator for the method.
   ILGenerator^ myILGenerator = myMethodBuilder->GetILGenerator();

   // Use the utility method to generate the MSIL instructions that print a String* to the console.
   myILGenerator->EmitWriteLine( "Hello World!" );

   // Generate the S"ret" MSIL instruction.
   myILGenerator->Emit( OpCodes::Ret );

   // End the creation of the type.
   myTypeBuilder->CreateType();
}

int main()
{
   // Create a dynamic assembly with a type named MyType.
   DefineMethod();

   // Get the assemblies currently loaded in the application domain.
   array<Assembly^>^myAssemblies = Thread::GetDomain()->GetAssemblies();
   Assembly^ myAssembly = nullptr;

   // Get the assembly named MyAssembly.
   for ( int i = 0; i < myAssemblies->Length; i++ )
      if ( String::Compare( myAssemblies[ i ]->GetName( false )->Name, "MyAssembly" ) == 0 )
            myAssembly = myAssemblies[ i ];

   if ( myAssembly != nullptr )
   {
      // Get a type named MyType.
      Type^ myType = myAssembly->GetType( "MyType" );

      // Get a method named MyMethod from the type.
      MethodBase^ myMethodBase = myType->GetMethod( "MyMethod" );

      // Get the parameters associated with the method.
      array<ParameterInfo^>^myParameters = myMethodBase->GetParameters();
      Console::WriteLine( "\nThe method {0} has the {1} parameters :", myMethodBase, myParameters->Length );

      // Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
      for ( int i = 0; i < myParameters->Length; i++ )
      {
         if ( myParameters[ i ]->IsIn )
                  Console::WriteLine( "\tThe {0} parameter has the In attribute", i + 1 );
         if ( myParameters[ i ]->IsOptional )
                  Console::WriteLine( "\tThe {0} parameter has the Optional attribute", i + 1 );
         if ( myParameters[ i ]->IsOut )
                  Console::WriteLine( "\tThe {0} parameter has the Out attribute", i + 1 );
      }
   }
   else
      Console::WriteLine( "Could not find a assembly named 'MyAssembly' for the current application domain" );
}

using System;
using System.Reflection;
using System.Threading;
using System.Reflection.Emit;

public class ParameterInfo_IsIn_IsOut_IsOptional
{
   public static void DefineMethod()
   {
      AssemblyName myAssemblyName = new AssemblyName();
      myAssemblyName.Name = "MyAssembly";
      // Get the assembly builder from the application domain associated with the current thread.
      AssemblyBuilder myAssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
      // Create a dynamic module in the assembly.
      ModuleBuilder myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", "MyAssembly.dll");
      // Create a type in the module.
      TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("MyType");
      // Create a method called MyMethod.
      MethodBuilder myMethodBuilder = myTypeBuilder.DefineMethod("MyMethod",MethodAttributes.Public | MethodAttributes.HideBySig |
                                                                           MethodAttributes.Static, typeof(string), new Type[] {typeof(int), typeof(short), typeof(long)});
      // Set the attributes for the parameters of the method.
      // Set the attribute for the first parameter to IN.
      ParameterBuilder myParameterBuilder = myMethodBuilder.DefineParameter(1, ParameterAttributes.In, "MyIntParameter");
      // Set the attribute for the second parameter to OUT.
      myParameterBuilder = myMethodBuilder.DefineParameter(2, ParameterAttributes.Out, "MyShortParameter");
      // Set the attribute for the third parameter to OPTIONAL.
      myParameterBuilder = myMethodBuilder.DefineParameter(3, ParameterAttributes.Optional | ParameterAttributes.HasDefault, "MyLongParameter");
      // Get the Microsoft Intermediate Language generator for the method.
      ILGenerator myILGenerator = myMethodBuilder.GetILGenerator();
      // Use the utility method to generate the MSIL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!");
      // Generate the "ret" MSIL instruction.
      myILGenerator.Emit(OpCodes.Ret);
      // End the creation of the type.
      myTypeBuilder.CreateType();
   }

   public static void Main()
   {
      // Create a dynamic assembly with a type named MyType.
      DefineMethod();

      // Get the assemblies currently loaded in the application domain.
      Assembly[] myAssemblies = Thread.GetDomain().GetAssemblies();
      Assembly myAssembly = null;
      // Get the assembly named MyAssembly.
      for(int i = 0; i < myAssemblies.Length; i++)
         if(String.Compare(myAssemblies[i].GetName(false).Name, "MyAssembly") == 0)
            myAssembly = myAssemblies[i];

      if(myAssembly != null)
      {
         // Get a type named MyType.
         Type myType = myAssembly.GetType("MyType");
         // Get a method named MyMethod from the type.
         MethodBase myMethodBase = myType.GetMethod("MyMethod");
         // Get the parameters associated with the method.
         ParameterInfo[] myParameters = myMethodBase.GetParameters();
         Console.WriteLine("\nThe method {0} has the {1} parameters :",
            myMethodBase, myParameters.Length);
         // Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
         for(int i = 0; i < myParameters.Length; i++)
         {
            if(myParameters[i].IsIn)
               Console.WriteLine("\tThe {0} parameter has the In attribute",
                                       i + 1);
            if(myParameters[i].IsOptional)
               Console.WriteLine("\tThe {0} parameter has the Optional attribute",
                                       i + 1);
            if(myParameters[i].IsOut)
               Console.WriteLine("\tThe {0} parameter has the Out attribute",
                                       i + 1);
         }
      }
      else
        {
            Console.WriteLine("Could not find a assembly named 'MyAssembly' for the current application domain");
        }
    }
}

Imports System.Reflection
Imports System.Threading
Imports System.Reflection.Emit

Public Class ParameterInfo_IsIn_IsOut_IsOptional
   
   Public Shared Sub DefineMethod()
      Dim myAssemblyName As New AssemblyName()
      myAssemblyName.Name = "MyAssembly"
      ' Get the assesmbly builder from the application domain associated with the current thread.
      Dim myAssemblyBuilder As AssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave)
      ' Create a dynamic module in the assembly.
      Dim myModuleBuilder As ModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", "MyAssembly.dll")
      ' Create a type in the module.
      Dim myTypeBuilder As TypeBuilder = myModuleBuilder.DefineType("MyType")
      ' Create a method called MyMethod.
      Dim myMethodBuilder As MethodBuilder = myTypeBuilder.DefineMethod("MyMethod", MethodAttributes.Public Or MethodAttributes.HideBySig Or MethodAttributes.Static, GetType(String), New Type() {GetType(Integer), GetType(Short), GetType(Long)})
      ' Set the attributes for the parameters of the method.
      ' Set the attribute for the first parameter to IN.
      Dim myParameterBuilder As ParameterBuilder = myMethodBuilder.DefineParameter(1, ParameterAttributes.In, "MyIntParameter")
      ' Set the attribute for the second parameter to OUT.
      myParameterBuilder = myMethodBuilder.DefineParameter(2, ParameterAttributes.Out, "MyShortParameter")
      ' Set the attribute for the third parameter to OPTIONAL.
      myParameterBuilder = myMethodBuilder.DefineParameter(3, ParameterAttributes.Optional Or ParameterAttributes.HasDefault, "MyLongParameter")
      ' Get the Microsoft Intermediate Language generator for the method.
      Dim myILGenerator As ILGenerator = myMethodBuilder.GetILGenerator()
      ' Use the utility method to generate the MSIL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!")
      ' Generate the "ret" MSIL instruction.
      myILGenerator.Emit(OpCodes.Ret)
      ' End the creation of the type.
      myTypeBuilder.CreateType()
   End Sub
   
   
   Public Shared Sub Main()
      ' Create a dynamic assembly with a type named 'MyType'.
      DefineMethod()
      
      ' Get the assemblies currently loaded in the application domain.
      Dim myAssemblies As [Assembly]() = Thread.GetDomain().GetAssemblies()
      Dim myAssembly As [Assembly] = Nothing
      ' Get the assembly named MyAssembly.
      Dim i As Integer
      For i = 0 To myAssemblies.Length - 1
         If [String].Compare(myAssemblies(i).GetName(False).Name, "MyAssembly") = 0 Then
            myAssembly = myAssemblies(i)
         End If 
      Next i
      If Not (myAssembly Is Nothing) Then
         ' Get a type named MyType.
         Dim myType As Type = myAssembly.GetType("MyType")
         ' Get a method named MyMethod from the type.
         Dim myMethodBase As MethodBase = myType.GetMethod("MyMethod")
         ' Get the parameters associated with the method.
         Dim myParameters As ParameterInfo() = myMethodBase.GetParameters()
         Console.WriteLine(ControlChars.Cr + "The method {0} has the {1} parameters :", myMethodBase, myParameters.Length)
         ' Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
         For i = 0 To myParameters.Length - 1
            If myParameters(i).IsIn Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the In attribute", i + 1)
            End If
            If myParameters(i).IsOptional Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the Optional attribute", i + 1)
            End If
            If myParameters(i).IsOut Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the Out attribute", i + 1)
            End If
         Next i
      Else
         Console.WriteLine("Could not find a assembly named 'MyAssembly' for the current application domain")
      End If
   End Sub
End Class

Uwagi

Ta metoda zależy od opcjonalnej flagi metadanych. Tę flagę można wstawić przez kompilatory, ale kompilatory nie są zobowiązane do tego.

Ta metoda wykorzystuje flagę Optional modułu ParameterAttributes wyliczającego.

Aby uzyskać tablicę, najpierw pobierz metodę ParameterInfo , a następnie wywołaj metodę MethodBase.GetParameters.

Dotyczy

Udostępnij za pośrednictwem