Mutex.ReleaseMutex Metoda

Definicja

Przestrzeń nazw:

System.Threading

Zestaw:

System.Threading.dll

Zestaw:

mscorlib.dll

Zestaw:

netstandard.dll

Zwalnia raz Mutex .

public:
 void ReleaseMutex();

public void ReleaseMutex ();

member this.ReleaseMutex : unit -> unit

Public Sub ReleaseMutex ()

Wyjątki

ApplicationException

Wątek wywołujący nie jest właścicielem mutex.

ObjectDisposedException

Bieżące wystąpienie zostało już usunięte.

Przykłady

W poniższym przykładzie pokazano, jak obiekt lokalny Mutex jest używany do synchronizowania dostępu do chronionego zasobu. Wątek, który tworzy mutex, nie jest jego właścicielem początkowo. Metoda ReleaseMutex jest używana do zwolnienia mutex, gdy nie jest już potrzebny.

// This example shows how a Mutex is used to synchronize access
// to a protected resource. Unlike Monitor, Mutex can be used with
// WaitHandle.WaitAll and WaitAny, and can be passed across
// AppDomain boundaries.
using namespace System;
using namespace System::Threading;
const int numIterations = 1;
const int numThreads = 3;
ref class Test
{
public:

   // Create a new Mutex. The creating thread does not own the
   // Mutex.
   static Mutex^ mut = gcnew Mutex;
   static void MyThreadProc()
   {
      for ( int i = 0; i < numIterations; i++ )
      {
         UseResource();

      }
   }


private:

   // This method represents a resource that must be synchronized
   // so that only one thread at a time can enter.
   static void UseResource()
   {
      
      //Wait until it is OK to enter.
      mut->WaitOne();
      Console::WriteLine( "{0} has entered protected the area", Thread::CurrentThread->Name );
      
      // Place code to access non-reentrant resources here.
      // Simulate some work.
      Thread::Sleep( 500 );
      Console::WriteLine( "{0} is leaving protected the area\r\n", Thread::CurrentThread->Name );
      
      // Release the Mutex.
      mut->ReleaseMutex();
   }

};

int main()
{
   
   // Create the threads that will use the protected resource.
   for ( int i = 0; i < numThreads; i++ )
   {
      Thread^ myThread = gcnew Thread( gcnew ThreadStart( Test::MyThreadProc ) );
      myThread->Name = String::Format( "Thread {0}", i + 1 );
      myThread->Start();

   }
   
   // The main thread exits, but the application continues to 
   // run until all foreground threads have exited.
}

// This example shows how a Mutex is used to synchronize access
// to a protected resource. Unlike Monitor, Mutex can be used with
// WaitHandle.WaitAll and WaitAny, and can be passed across
// AppDomain boundaries.
 
using System;
using System.Threading;

class Test13
{
    // Create a new Mutex. The creating thread does not own the
    // Mutex.
    private static Mutex mut = new Mutex();
    private const int numIterations = 1;
    private const int numThreads = 3;

    static void Main()
    {
        // Create the threads that will use the protected resource.
        for(int i = 0; i < numThreads; i++)
        {
            Thread myThread = new Thread(new ThreadStart(MyThreadProc));
            myThread.Name = String.Format("Thread{0}", i + 1);
            myThread.Start();
        }

        // The main thread exits, but the application continues to
        // run until all foreground threads have exited.
    }

    private static void MyThreadProc()
    {
        for(int i = 0; i < numIterations; i++)
        {
            UseResource();
        }
    }

    // This method represents a resource that must be synchronized
    // so that only one thread at a time can enter.
    private static void UseResource()
    {
        // Wait until it is safe to enter.
        mut.WaitOne();

        Console.WriteLine("{0} has entered the protected area", 
            Thread.CurrentThread.Name);

        // Place code to access non-reentrant resources here.

        // Simulate some work.
        Thread.Sleep(500);

        Console.WriteLine("{0} is leaving the protected area\r\n", 
            Thread.CurrentThread.Name);
         
        // Release the Mutex.
        mut.ReleaseMutex();
    }
}

' This example shows how a Mutex is used to synchronize access
' to a protected resource. Unlike Monitor, Mutex can be used with
' WaitHandle.WaitAll and WaitAny, and can be passed across
' AppDomain boundaries.
 
Imports System.Threading

Class Test
    ' Create a new Mutex. The creating thread does not own the
    ' Mutex.
    Private Shared mut As New Mutex()
    Private Const numIterations As Integer = 1
    Private Const numThreads As Integer = 3

    <MTAThread> _
    Shared Sub Main()
        ' Create the threads that will use the protected resource.
        Dim i As Integer
        For i = 1 To numThreads
            Dim myThread As New Thread(AddressOf MyThreadProc)
            myThread.Name = [String].Format("Thread{0}", i)
            myThread.Start()
        Next i

        ' The main thread exits, but the application continues to
        ' run until all foreground threads have exited.

    End Sub

    Private Shared Sub MyThreadProc()
        Dim i As Integer
        For i = 1 To numIterations
            UseResource()
        Next i
    End Sub

    ' This method represents a resource that must be synchronized
    ' so that only one thread at a time can enter.
    Private Shared Sub UseResource()
        ' Wait until it is safe to enter.
        mut.WaitOne()

        Console.WriteLine("{0} has entered protected area", _
            Thread.CurrentThread.Name)

        ' Place code to access non-reentrant resources here.

        ' Simulate some work
        Thread.Sleep(500)

        Console.WriteLine("{0} is leaving protected area" & vbCrLf, _
            Thread.CurrentThread.Name)

        ' Release Mutex.
        mut.ReleaseMutex()
    End Sub
End Class

Uwagi

Za każdym razem, gdy wątek uzyskuje mutex (na przykład wywołując jego WaitOne metodę), musi następnie wywołać ReleaseMutex metodę , aby zrezygnować z własności mutex i odblokować inne wątki, które próbują zdobyć własność mutexu. Jeśli próba uzyskania własności mutex zakończy się niepowodzeniem (na przykład gdy wywołanie WaitOne metody z parametrem millisecondsTimeout timeout lub zwróci false wartość , ponieważ upłynął limit czasu żądania), wątek nie powinien wywołać ReleaseMutexmetody , w tym przypadku wątek nie powinien również mieć dostępu do zasobu chronionego przez mutex, jak pokazano w poniższym przykładzie.

using System;
using System.Threading;

class Example
{
    // Create a new Mutex. The creating thread does not own the mutex.
    private static Mutex mut = new Mutex();
    private const int numIterations = 1;
    private const int numThreads = 3;

    static void Main()
    {
        Example ex = new Example();
        ex.StartThreads();
    }

     private void StartThreads()
     {
        // Create the threads that will use the protected resource.
        for(int i = 0; i < numThreads; i++)
        {
            Thread newThread = new Thread(new ThreadStart(ThreadProc));
            newThread.Name = String.Format("Thread{0}", i + 1);
            newThread.Start();
        }

        // The main thread returns to Main and exits, but the application continues to
        // run until all foreground threads have exited.
    }

    private static void ThreadProc()
    {
        for(int i = 0; i < numIterations; i++)
        {
            UseResource();
        }
    }

    // This method represents a resource that must be synchronized
    // so that only one thread at a time can enter.
    private static void UseResource()
    {
        // Wait until it is safe to enter, and do not enter if the request times out.
        Console.WriteLine("{0} is requesting the mutex", Thread.CurrentThread.Name);
        if (mut.WaitOne(1000)) {
           Console.WriteLine("{0} has entered the protected area", 
               Thread.CurrentThread.Name);
   
           // Place code to access non-reentrant resources here.
   
           // Simulate some work.
           Thread.Sleep(5000);
   
           Console.WriteLine("{0} is leaving the protected area", 
               Thread.CurrentThread.Name);
   
           // Release the Mutex.
              mut.ReleaseMutex();
           Console.WriteLine("{0} has released the mutex", 
                             Thread.CurrentThread.Name);
        }
        else {
           Console.WriteLine("{0} will not acquire the mutex", 
                             Thread.CurrentThread.Name);
        }
    }

    ~Example()
    {
       mut.Dispose();
    }
}
// The example displays output like the following:
//       Thread1 is requesting the mutex
//       Thread1 has entered the protected area
//       Thread2 is requesting the mutex
//       Thread3 is requesting the mutex
//       Thread2 will not acquire the mutex
//       Thread3 will not acquire the mutex
//       Thread1 is leaving the protected area
//       Thread1 has released the mutex

Imports System.Threading

Class Example
   ' Create a new Mutex. The creating thread does not own the mutex.
   Private mut As New Mutex()
   Private Const numIterations As Integer = 1
   Private Const numThreads As Integer = 3

   Public Shared Sub Main()
      Dim ex As New Example()
      ex.StartThreads()
   End Sub
   
   Private Sub StartThreads()
        ' Create the threads that will use the protected resource.
        For i As Integer = 0 To numThreads - 1
            Dim newThread As New Thread(AddressOf ThreadProc)
            newThread.Name = String.Format("Thread{0}", i + 1)
            newThread.Start()
        Next

        ' The main thread returns to Main and exits, but the application continues to
        ' run until all foreground threads have exited.
   End Sub

   Private Sub ThreadProc()
        For i As Integer = 0 To numIterations - 1
            UseResource()
        Next
   End Sub

   ' This method represents a resource that must be synchronized
   ' so that only one thread at a time can enter.
   Private Sub UseResource()
        ' Wait until it is safe to enter.
        Console.WriteLine("{0} is requesting the mutex", 
                          Thread.CurrentThread.Name)
        If mut.WaitOne(1000) Then
           Console.WriteLine("{0} has entered the protected area", 
               Thread.CurrentThread.Name)
   
           ' Place code to access non-reentrant resources here.
   
           ' Simulate some work.
           Thread.Sleep(5000)
   
           Console.WriteLine("{0} is leaving the protected area", 
               Thread.CurrentThread.Name)
   
           ' Release the Mutex.
           mut.ReleaseMutex()
           Console.WriteLine("{0} has released the mutex", 
                             Thread.CurrentThread.Name)
        Else
           Console.WriteLine("{0} will not acquire the mutex", 
                             Thread.CurrentThread.Name)
        End If
   End Sub
   
   Protected Overrides Sub Finalize()
      mut.Dispose()
   End Sub
End Class
' The example displays output like the following:
'       Thread1 is requesting the mutex
'       Thread1 has entered the protected area
'       Thread2 is requesting the mutex
'       Thread3 is requesting the mutex
'       Thread2 will not acquire the mutex
'       Thread3 will not acquire the mutex
'       Thread1 is leaving the protected area
'       Thread1 has released the mutex

Wątek, który jest właścicielem mutex, może określić ten sam mutex w powtarzających się wywołaniach funkcji oczekiwania bez blokowania wykonywania. Liczba wywołań jest przechowywana przez środowisko uruchomieniowe języka wspólnego. Wątek musi wywołać ReleaseMutex tę samą liczbę razy, aby zwolnić własność mutex.

Jeśli wątek kończy się podczas posiadania mutex, mówi się, że mutex zostanie porzucony. Stan mutex jest ustawiony na sygnalizowany, a następny wątek oczekiwania dostaje własność. Jeśli nikt nie jest właścicielem mutex, stan mutex jest sygnalizowany. Począwszy od wersji 2.0 .NET Framework, AbandonedMutexException element jest zgłaszany w następnym wątku, który uzyskuje mutex. Przed wersją 2.0 .NET Framework nie zgłoszono wyjątku.

Przestroga

Porzucony mutex często wskazuje poważny błąd w kodzie. Gdy wątek kończy się bez zwolnienia mutexu, struktury danych chronione przez mutex mogą nie być w stanie spójnym. Następny wątek żądania własności mutex może obsłużyć ten wyjątek i kontynuować, jeśli można zweryfikować integralność struktur danych.

W przypadku mutexu całego systemu porzucony mutex może wskazywać, że aplikacja została nagle zakończona (na przykład przy użyciu menedżera zadań Windows).

Zobacz też

• Zarządzana wątkowość
• Muteksy