Udostępnij za pośrednictwem


Enable TLS 1.1 and TLS 1.2 support in SharePoint Server 2019

APPLIES TO: no-img-132013 no-img-162016 yes-img-192019 no-img-seSubscription Edition no-img-sopSharePoint in Microsoft 365

SharePoint Server 2019 supports TLS protocol versions 1.0, 1.1, and 1.2 by default. However, to enable end-to-end support for TLS protocol versions 1.1 and 1.2 in your SharePoint 2019 environment, you may need to install updates or change configuration settings in the following locations:

  1. SharePoint servers in your SharePoint farm

  2. Microsoft SQL Servers in your SharePoint farm

  3. Client computers used to access your SharePoint sites

Important

If you do not update each of these locations, you run the risk of systems failing to connect to each other using TLS 1.1 or TLS 1.2. The systems will instead fall back to an older security protocol; and if the older security protocols are disabled, the systems may fail to connect entirely.

Example: Client computers may fail to connect to your SharePoint sites.

Summary of the update process

The following image shows the three step process necessary to enable TLS 1.1 and TLS 1.2 support on your SharePoint servers, SQL Servers, and client computers.

The three steps to update servers in your SharePoint farm, Microsoft SQL server, and client computers.

Step 1: Update SharePoint servers in your SharePoint farm

SharePoint Server 2019 supports TLS protocol versions 1.0, 1.1, and 1.2 by default. No changes are necessary on the SharePoint servers in your farm to enable TLS 1.1 or TLS 1.2 support. Follow this step to update your SharePoint server if you wish to disable certain TLS protocol versions.

Steps for SharePoint Server Windows Server 2016 Windows Server 2019
The following step is optional. You may choose to run this step based on your organization's security and compliance requirements.
1.0 - Disable earlier versions of TLS in Windows Schannel
Optional
Optional

1.0 - Disable earlier versions of TLS in Windows Schannel

SSL and TLS support are enabled or disabled in Windows Schannel by editing the Windows Registry. Each SSL and TLS protocol version can be enabled or disabled independently. You don't need to enable or disable one protocol version to enable or disable another protocol version.

Important

SSL 2.0 and SSL 3.0 are disabled by default in Windows Server 2016 and Windows Server 2019 due to serious security vulnerabilities in those protocol versions.

Customers may also choose to disable TLS 1.0 and TLS 1.1 to ensure that only the newest protocol version is used. However, this may cause compatibility issues with software that doesn't support the newest TLS protocol version. Customers should test such a change before performing it in production.

The Enabled registry value defines whether the protocol version can be used. If the value is set to 0, the protocol version cannot be used, even if it is enabled by default or if the application explicitly requests that protocol version. If the value is set to 1, the protocol version can be used if enabled by default or if the application explicitly requests that protocol version. If the value is not defined, it will use a default value determined by the operating system.

The DisabledByDefault registry value defines whether the protocol version is used by default. This setting only applies when the application doesn't explicitly request the protocol versions to be used. If the value is set to 0, the protocol version will be used by default. If the value is set to 1, the protocol version will not be used by default. If the value is not defined, it will use a default value determined by the operating system.

To disable TLS 1.0 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls10-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls10-disable.reg file.

  4. Double-click the tls10-disable.reg.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To disable TLS 1.1 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls11-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls11-disable.reg file.

  4. Double-click the tls11-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

Step 2: Update your Microsoft SQL Servers in your SharePoint farm

SQL Server 2016 and SQL Server 2017 support TLS protocol versions 1.0, 1.1, and 1.2 by default on Windows Server 2016 and Windows Server 2019. No changes are necessary on the SQL servers in your SharePoint farm to enable TLS 1.1 or TLS 1.2 support. For more information about TLS support in SQL Server, review the KB article TLS 1.2 support for Microsoft SQL Server.

Follow this step to update the SQL Servers in your SharePoint farm if you wish to disable certain TLS protocol versions.

Steps for your SQL Servers Windows Server 2016 Windows Server 2019
The following step is optional. You may choose to run this step based on your organization's security and compliance requirements.
2.1 - Disable earlier versions of TLS in Windows Schannel
Optional
Optional

2.1 - Disable earlier versions of TLS in Windows Schannel

SSL and TLS support are enabled or disabled in Windows Schannel by editing the Windows Registry. Each SSL and TLS protocol version can be enabled or disabled independently. You don't need to enable or disable one protocol version to enable or disable another protocol version.

Important

SSL 2.0 and SSL 3.0 are disabled by default in Windows Server 2016 and Windows Server 2019 due to serious security vulnerabilities in those protocol versions.

Customers may also choose to disable TLS 1.0 and TLS 1.1 to ensure that only the newest protocol version is used. However, this may cause compatibility issues with software that doesn't support the newest TLS protocol version. Customers should test such a change before performing it in production.

The Enabled registry value defines whether the protocol version can be used. If the value is set to 0, the protocol version cannot be used, even if it is enabled by default or if the application explicitly requests that protocol version. If the value is set to 1, the protocol version can be used if enabled by default or if the application explicitly requests that protocol version. If the value is not defined, it will use a default value determined by the operating system.

The DisabledByDefault registry value defines whether the protocol version is used by default. This setting only applies when the application doesn't explicitly request the protocol versions to be used. If the value is set to 0, the protocol version will be used by default. If the value is set to 1, the protocol version will not be used by default. If the value is not defined, it will use a default value determined by the operating system.

To disable TLS 1.0 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls10-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls10-disable.reg file.

  4. Double-click the tls10-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To disable TLS 1.1 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls11-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls11-disable.reg file.

  4. Double-click the tls11-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

Step 3: Update your client computers used to access your SharePoint sites

Follow these steps to update your client computers that access your SharePoint site.

Steps for your client computers Windows 7 Windows 8.1 Windows 10
3.1 - Enable TLS 1.1 and TLS 1.2 in Windows Schannel
Required
N/A
N/A
3.2 - Enable TLS 1.1 and TLS 1.2 support in WinHTTP
Required
N/A
N/A
3.3 - Enable TLS 1.1 and TLS 1.2 support in Internet Explorer
Required
N/A
N/A
3.4 - Enable strong cryptography in .NET Framework 4.5 or higher
Required
Required
Required
3.5 - Install .NET Framework 3.5 update for TLS 1.1 and TLS 1.2 support
Required
Required
Required
The following step is recommended. Although not directly required by SharePoint Server 2019, they provide better security by restricting the use of weak encryption algorithms.
3.6 - Enable strong cryptography in .NET Framework 3.5
Recommended
Recommended
Recommended
The following step is optional. You may choose to run this step based on your organization's security and compliance requirements.
3.7 - Disable earlier versions of SSL and TLS in Windows Schannel
Optional
Optional
Optional

3.1 - Enable TLS 1.1 and TLS 1.2 in Windows Schannel

SSL and TLS support are enabled or disabled in Windows Schannel by editing the Windows Registry. Each SSL and TLS protocol version can be enabled or disabled independently. You don't need to enable or disable one protocol version to enable or disable another protocol version.

The Enabled registry value defines whether the protocol version can be used. If the value is set to 0, the protocol version cannot be used, even if it is enabled by default or if the application explicitly requests that protocol version. If the value is set to 1, the protocol version can be used if enabled by default or if the application explicitly requests that protocol version. If the value is not defined, it will use a default value determined by the operating system.

The DisabledByDefault registry value defines whether the protocol version is used by default. This setting only applies when the application doesn't explicitly request the protocol versions to be used. If the value is set to 0, the protocol version will be used by default. If the value is set to 1, the protocol version will not be used by default. If the value is not defined, it will use a default value determined by the operating system.

To enable TLS 1.1 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls11-enable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00 
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001
    
  3. Save the tls11-enable.reg file.

  4. Double-click the tls11-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To enable TLS 1.2 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls12-enable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]
    "DisabledByDefault"=dword:00000000
    "Enabled"=dword:00000001
    
  3. Save the tls12-enable.reg file.

  4. Double-click the tls12-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

3.2 - Enable TLS 1.1 and TLS 1.2 support in WinHTTP

WinHTTP doesn't inherit its SSL and TLS encryption protocol version defaults from the Windows Schannel DisabledByDefault registry value. WinHTTP uses its own SSL and TLS encryption protocol version defaults, which vary by operating system. To override the defaults, you must install a KB update and configure Windows Registry keys.

The WinHTTP DefaultSecureProtocols registry value is a bit field that accepts multiple values by adding them together into a single value. You can use the Windows Calculator program (Calc.exe) in Programmer mode to add the following hexadecimal values as desired.

DefaultSecureProtocols value Description
0x00000008
Enable SSL 2.0 by default
0x00000020
Enable SSL 3.0 by default
0x00000080
Enable TLS 1.0 by default
0x00000200
Enable TLS 1.1 by default
0x00000800
Enable TLS 1.2 by default

For example, you can enable TLS 1.0, TLS 1.1, and TLS 1.2 by default by adding the values 0x00000080, 0x00000200, and 0x00000800 together to form the value 0x00000A80.

To install the WinHTTP KB update, follow the instructions from the KB article Update to enable TLS 1.1 and TLS 1.2 as a default secure protocols in WinHTTP in Windows

To enable TLS 1.0, TLS 1.1, and TLS 1.2 by default in WinHTTP

  1. From Notepad.exe, create a text file named winhttp-tls10-tls12-enable.reg.

  2. Copy, and then paste the following text.

    For 64-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]
    "DefaultSecureProtocols"=dword:00000A80
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]
    "DefaultSecureProtocols"=dword:00000A80
    

    For 32-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]
    "DefaultSecureProtocols"=dword:00000A80
    
  3. Save the winhttp-tls10-tls12-enable.reg file.

  4. Double-click the winhttp-tls10-tls12-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

3.3 - Enable TLS 1.1 and TLS 1.2 support in Internet Explorer

Internet Explorer versions earlier than Internet Explorer 11 did not enable TLS 1.1 or TLS 1.2 support by default. Support for TLS 1.1 and TLS 1.2 is enabled by default starting with Internet Explorer 11.

To enable TLS 1.1 and TLS 1.2 support in Internet Explorer

  1. From Internet Explorer, click Tools > Internet Options > Advanced or click Settings menu in Internet Explorer > Internet Options > Advanced.

  2. In the Security section, verify that the following check boxes are selected. If not, click the following check boxes:

  • Use TLS 1.1

  • Use TLS 1.2

  1. Optionally, if you want to disable support for earlier security protocol versions, uncheck the following check boxes:
  • Use SSL 2.0

  • Use SSL 3.0

  • Use TLS 1.0

    Note

    Disabling TLS 1.0 may cause compatibility issues with sites that don't support newer security protocol versions. Customers should test this change before performing it in production.

  1. Click OK.

3.4 - Enable strong cryptography in .NET Framework 4.5 or higher

.NET Framework 4.5 and higher doesn't inherit its SSL and TLS security protocol version defaults from the Windows Schannel DisabledByDefault registry value. Instead, it uses its own SSL and TLS security protocol version defaults. To override the defaults, you must configure Windows Registry keys.

The SchUseStrongCrypto registry value changes the .NET Framework 4.5 and higher security protocol version default from SSL 3.0 or TLS 1.0 to TLS 1.0 or TLS 1.1 or TLS 1.2. In addition, it restricts the use of encryption algorithms with TLS that are considered weak such as RC4.

Applications compiled for .NET Framework 4.6 or higher will behave as if the SchUseStrongCrypto registry value is set to 1, even if it isn't. To ensure all .NET Framework applications will use strong cryptography, you must configure this Windows Registry value.

Microsoft has released an optional security update for .NET Framework 4.5, 4.5.1, and 4.5.2 that will automatically configure the Windows Registry keys for you. No updates are available for .NET Framework 4.6 or higher. You must manually configure the Windows Registry keys on .NET Framework 4.6 or higher.

For Windows 7 and Windows Server 2008 R2

For Windows Server 2012

For Windows 8.1 and Windows Server 2012 R2

To enable strong cryptography in .NET Framework 4.6 or higher

  1. From Notepad.exe, create a text file named net46-strong-crypto-enable.reg.

  2. Copy, and then paste the following text.

    For 64-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319]
    "SchUseStrongCrypto"=dword:00000001
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v4.0.30319]
    "SchUseStrongCrypto"=dword:00000001
    

    For 32-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319]
    "SchUseStrongCrypto"=dword:00000001
    
  3. Save the net46-strong-crypto-enable.reg file.

  4. Double-click the net46-strong-crypto-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

3.5 - Install .NET Framework 3.5 update for TLS 1.1 and TLS 1.2 support

.NET Framework 3.5 doesn't support TLS 1.1 or TLS 1.2 by default. To add support for TLS 1.1 and TLS 1.2, you must install a KB update and configure Windows Registry keys for each of the operating systems listed in this section.

The SystemDefaultTlsVersions registry value defines which security protocol version defaults will be used by .NET Framework 3.5. If the value is set to 0, .NET Framework 3.5 will default to SSL 3.0 or TLS 1.0. If the value is set to 1, .NET Framework 3.5 will inherit its defaults from the Windows Schannel DisabledByDefault registry values. If the value is undefined, it will behave as if the value is set to 0.

To enable .NET Framework 3.5 to inherit its encryption protocol defaults from Windows Schannel

For Windows 7 and Windows Server 2008 R2

  1. To install the .NET Framework 3.5.1 update for Windows 7 and Windows Server 2008 R2, see the KB article Support for TLS System Default Versions included in the .NET Framework 3.5.1 on Windows 7 SP1 and Server 2008 R2 SP1

  2. After the KB update is installed, manually configure the registry keys.

For Windows Server 2012

  1. To install the .NET Framework 3.5 update for Windows Server 2012, see the KB article Support for TLS System Default Versions included in the .NET Framework 3.5 on Windows Server 2012

  2. After the KB update is installed, manually configure the registry keys.

For Windows 8.1 and Windows Server 2012 R2

  1. To install the .NET Framework 3.5 SP1 update for Windows 8.1 and Windows Server 2012 R2, see the KB article Support for TLS System Default Versions included in the .NET Framework 3.5 on Windows 8.1 and Windows Server 2012 R2

  2. After the KB update is installed, manually configure the registry keys.

For Windows 10 (Version 1507)

For Windows 10 (Version 1511)

  1. To install the Cumulative Update for Windows 10 Version 1511 and Windows Server 2016 Technical Preview 4: May 10, 2016, see Cumulative Update for Windows 10 Version 1511 and Windows Server 2016 Technical Preview 4: May 10, 2016.

  2. After the KB update is installed, manually configure the registry keys.

Windows 10 (Version 1607) and higher, Windows Server 2016, and Windows Server 2019

No update needs to be installed. Configure the Windows Registry keys as described below.

To manually configure the registry keys, do these steps.

  1. From Notepad.exe, create a text file named net35-tls12-enable.reg.

  2. Copy, and then paste the following text.

    For 64-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
    "SystemDefaultTlsVersions"=dword:00000001
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v2.0.50727]
    "SystemDefaultTlsVersions"=dword:00000001
    

    For 32-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
    "SystemDefaultTlsVersions"=dword:00000001
    
  3. Save the net35-tls12-enable.reg file.

  4. Double-click the net35-tls12-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

3.6 - Enable strong cryptography in .NET Framework 3.5

The SchUseStrongCrypto registry value restricts the use of encryption algorithms with TLS that are considered weak such as RC4.

Microsoft has released an optional security update for .NET Framework 3.5 on pre-Windows 10 operating systems that will automatically configure the Windows Registry keys for you. No updates are available for Windows 10. You must manually configure the Windows Registry keys on Windows 10.

For Windows 7 and Windows Server 2008 R2

To enable strong cryptography in .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2, see the KB article Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: May 13, 2014

For Windows Server 2012

To enable strong cryptography in .NET Framework 3.5 on Windows Server 2012, see the KB article Description of the security update for the .NET Framework 3.5 on Windows 8 and Windows Server 2012: May 13, 2014

For Windows 8.1 and Windows Server 2012 R2

To enable strong cryptography in .NET Framework 3.5 on Windows 8.1 and Windows Server 2012 R2 see the KB article Description of the security update for the .NET Framework 3.5 on Windows 8.1 and Windows Server 2012 R2: May 13, 2014

To enable strong cryptography in .NET Framework 3.5 on Windows 10

  1. From Notepad.exe, create a text file named net35-strong-crypto-enable.reg.

  2. Copy, and then paste the following text.

    For 64-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
    "SchUseStrongCrypto"=dword:00000001
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v2.0.50727]
    "SchUseStrongCrypto"=dword:00000001
    

    For 32-bit operating system

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
    "SchUseStrongCrypto"=dword:00000001
    
  3. Save the net35-strong-crypto-enable.reg file.

  4. Double-click the net35-strong-crypto-enable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

3.7 - Disable earlier versions of SSL and TLS in Windows Schannel

SSL and TLS support are enabled or disabled in Windows Schannel by editing the Windows Registry. Each SSL and TLS protocol version can be enabled or disabled independently. You don't need to enable or disable one protocol version to enable or disable another protocol version.

Important

Microsoft recommends disabling SSL 2.0 and SSL 3.0 due to serious security vulnerabilities in those protocol versions.

Customers may also choose to disable TLS 1.0 and TLS 1.1 to ensure that only the newest protocol version is used. However, this may cause compatibility issues with software that doesn't support the newest TLS protocol version. Customers should test such a change before performing it in production.

The Enabled registry value defines whether the protocol version can be used. If the value is set to 0, the protocol version cannot be used, even if it is enabled by default or if the application explicitly requests that protocol version. If the value is set to 1, the protocol version can be used if enabled by default or if the application explicitly requests that protocol version. If the value is not defined, it will use a default value determined by the operating system.

The DisabledByDefault registry value defines whether the protocol version is used by default. This setting only applies when the application doesn't explicitly request the protocol versions to be used. If the value is set to 0, the protocol version will be used by default. If the value is set to 1, the protocol version will not be used by default. If the value is not defined, it will use a default value determined by the operating system.

To disable SSL 2.0 support in Windows Schannel

  1. From Notepad.exe, create a text file named ssl20-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the ssl20-disable.reg file.

  4. Double-click the ssl20-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To disable SSL 3.0 support in Windows Schannel

  1. From Notepad.exe, create a text file named ssl30-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the ssl30-disable.reg file.

  4. Double-click the ssl30-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To disable TLS 1.0 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls10-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls10-disable.reg file.

  4. Double-click the tls10-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.

To disable TLS 1.1 support in Windows Schannel

  1. From Notepad.exe, create a text file named tls11-disable.reg.

  2. Copy, and then paste the following text.

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
    "DisabledByDefault"=dword:00000001
    "Enabled"=dword:00000000
    
  3. Save the tls11-disable.reg file.

  4. Double-click the tls11-disable.reg file.

  5. Click Yes to update your Windows Registry with these changes.

  6. Restart your computer for the change to take effect.